7C-7754 CYLINDER BLOCK GP S/N 28Z619-621 FIELD INSTALLATION 3516 VEHICULAR ENGINE



BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

VEHICULAR ENGINE 3516 VEHICULAR ENGINE 28Z
 3516 Engine For OEM Built Machines 28Z00613-UP SEBP1678 3516 28Z   (1982)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8249 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-7264 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-7754 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4668 CYLINDER BLOCK GP
LINER-CYLINDER BLOCK
123-8206 LINER-CYLINDER BLOCK
SEAL AS-WATER
105-4656 SEAL AS-WATER
 

#SEBP16780040
 

7C-7754: CYLINDER BLOCK GP

7C-7754 CYLINDER BLOCK GP
S/N 28Z619-621
FIELD INSTALLATION
i00110381 SEBP1678
7C7754 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 5M-6213 [6] PLUG-PIPE (1/4-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 4W-4814 [2] ADAPTER  
10. 9Y-9175 C [9] CAP-CRANKSHAFT BEARING  
11. 7X-7925 C [36] BOLT (7/8-14X11-IN)  
  5P-8249 C [36] WASHER-HARD (24X41.5X4-MM THK)  
12. 4W-4813 [2] PLUG  
13. 8T-2929 [4] SEAL-O-RING  
14. 8T-2928 [4] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP16780041
 

7E-4668: CYLINDER BLOCK GP

7E-4668 CYLINDER BLOCK GP
S/N 28Z622-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4937@@@@@
FIELD INSTALLATION
i00091633 SEBP1678
7E4668 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 7N-2048 [18] BEARING-CAMSHAFT  
2. 9S-4191 [6] PLUG (9/16-18-THD)  
3. 7N-5641 [2] PLUG-MANIFOLD  
  5F-9657 [4] SEAL-O-RING  
4. 7H-3171 [28] PLUG-PIPE  
5. 2B-0858 [4] PLUG-PIPE  
6. 1B-5174 [2] PLUG-PIPE  
7. 2W-2940 [8] PLUG  
8. 6V-3348 [8] SEAL-O-RING  
9. 8T-2928 [2] SEAL-O-RING  
10. 9Y-9175 [9] CAP-CRANKSHAFT BEARING  
11. 7X-7925 [36] BOLT (7/8-14X11-IN)  
  5P-8249 [36] WASHER-HARD (24X41.5X4-MM THK)  
12. 4W-4813 [2] PLUG  
13. 8T-2929 [2] SEAL-O-RING  
14. 033-6042 [6] SEAL-O-RING  
    FOR REPAIR OF CRACKED CYLINDER BLOCKS:
  7E-2865 Y [1] KIT-INSERT (CYLINDER BLOCK)(DEEP CRACKS)  
  7W-5949 Y [1] INSERT-LINER SEAT (SHALLOW CRACKS)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780042
 

131-0410: CYLINDER HEAD AS

131-0410 CYLINDER HEAD AS
S/N 28Z642-UP
PART OF 131-0424, 156-9140 CYLINDER HEAD AS, 4W-9560 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@131-0424@@@@@, @@@@@156-9140@@@@@, @@@@@172-0839@@@@@
i00506568 SEBP1678
1310410 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
2. 3B-0645 [5] PLUG-CUP  
3. 3J-7354 [4] SEAL-O-RING  
4. 131-4340 [2] INSERT-VALVE SEAT (STANDARD)(EXHAUST)  
  149-0246 AB INSERT-VALVE SEAT (0.51-MM OS)  
5. 3B-0623 [5] PLUG-CUP  
6. 9S-8002 [4] PLUG (7/16-20-THD)  
7. 136-9630 [2] INSERT-VALVE SEAT (STANDARD)(INLET)  
  149-0245 AB INSERT-VALVE SEAT (0.508-MM OS)(INLET)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP16780043
 

131-0424: CYLINDER HEAD AS

131-0424 CYLINDER HEAD AS
FIELD REPLACEMENT FOR 131-0410 CYLINDER HEAD AS
i00506580 SEBP1678
1310424 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 131-0410 Y [1] CYLINDER HEAD AS  
2. 133-9306 [4] GUIDE-VALVE (STANDARD)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)  
3. 7N-1902 [2] DOWEL  
4. 4D-0514 [1] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780044
 

156-9140: CYLINDER HEAD AS

156-9140 CYLINDER HEAD AS
S/N 28Z613-652
FIELD REPLACEMENT FOR @@@@@131-0410@@@@@
i01053007 SEBP1678
1569140 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 131-0410 Y [1] CYLINDER HEAD AS  
2. 133-9306 [4] GUIDE-VALVE (STANDARD)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)  
3. 7N-1902 [2] DOWEL  
4. 8T-6759 [1] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780045
 

172-0834: CYLINDER HEAD AS

172-0834 CYLINDER HEAD AS
S/N 28Z653-99999
PART OF 242-5327 CYLINDER HEAD AS, 172-0835 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@172-0839@@@@@, @@@@@242-5327@@@@@
i01179048 SEBP1678
1720834 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 9S-8002 [4] PLUG (7/16-20-THD)  
2. 130-2607 [2] INSERT-VALVE SEAT (STANDARD)(INLET)  
  149-1981 AB INSERT-VALVE SEAT (0.51-MM OS)(INLET)  
3. 130-2608 [2] INSERT-VALVE SEAT (STANDARD)(EXHAUST)  
  166-5945 AB INSERT-VALVE SEAT (0.508-MM OS)(EXHAUST)  
4. 214-7566 [4] SEAL-O-RING  
5. 3B-0623 [5] PLUG-CUP  
6. 3B-0645 [5] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP16780046
 

172-0839: CYLINDER HEAD AS

172-0839 CYLINDER HEAD AS
S/N 28Z653-UP
FIELD REPLACEMENT FOR @@@@@131-0410@@@@@, @@@@@172-0834@@@@@
i01179071 SEBP1678
1720839 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 3B-0645 [5] PLUG-CUP  
2. 3J-7354 [4] SEAL-O-RING  
3. 130-2607 [2] INSERT-VALVE SEAT (STANDARD)(INLET)  
  149-1981 AB INSERT-VALVE SEAT (0.51-MM OS)(INLET)  
4. 3B-0623 [5] PLUG-CUP  
5. 9S-8002 [4] PLUG (7/16-20-THD)  
6. 130-2608 [2] INSERT-VALVE SEAT (STANDARD)(EXHAUST)  
  166-5945 AB [1] INSERT-VALVE SEAT (0.508-MM OS)(EXHAUST)  
7. 133-9306 [4] GUIDE-VALVE (STANDARD)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)  
8. 7N-1902 [2] DOWEL  
9. 8T-6759 [1] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP16780047
 

242-5327: CYLINDER HEAD AS

242-5327 CYLINDER HEAD AS
S/N 28Z653-UP
FIELD REPLACEMENT FOR @@@@@172-0834@@@@@
i02087260 SEBP1678
2425327 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 133-9306 [2] GUIDE-VALVE (STANDARD)(INLET)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)(INLET)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)(INLET)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)(INLET)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)(INLET)  
2. 172-0834 Y [1] CYLINDER HEAD AS  
3. 197-6995 [2] GUIDE-VALVE (STANDARD)(EXHAUST)  
  276-3875 AB GUIDE-VALVE (0.127-MM OS)(EXHAUST)  
  276-3876 AB GUIDE-VALVE (0.25-MM OS)(EXHAUST)  
  320-7710 AB GUIDE-VALVE (0.381-MM OS, EXHAUST)  
  320-7711 AB GUIDE-VALVE (0.508-MM OS, EXHAUST)  
4. 239-0689 [1] DOWEL  
5. 8T-6759 [1] PLUG-PIPE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780048
 

7E-5859: CYLINDER HEAD AS

7E-5859 CYLINDER HEAD AS
S/N 28Z621-UP
FIELD REPLACEMENT FOR @@@@@ 7E-5861@@@@@
i00091636 SEBP1678
7E5859 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
1. 9Y-1847 [4] GUIDE-VALVE  
2. 7N-1902 [2] DOWEL  
3. 4D-0514 [1] PLUG-PIPE  
 

#SEBP16780049
 

7E-5861: CYLINDER HEAD AS

7E-5861 CYLINDER HEAD AS
S/N 28Z622-641
PART OF 4W-9560 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7E-5859@@@@@
i00091637 SEBP1678
7E5861 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

Pos. Part No Qty Parts name Comments
2. 3B-0645 [5] PLUG-CUP  
3. 7E-5862 [2] INSERT-VALVE SEAT (INLET)  
4. 3J-7354 [4] SEAL-O-RING  
5. 118-9491 [2] INSERT-VALVE SEAT (EXHAUST)  
6. 3B-0623 [5] PLUG-CUP  
7. 9S-8002 [4] PLUG (7/16-20-THD)  
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts
1984/04/11
Crankcase Explosion Relief Valve Kit Available
1985/04/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Check Height Of Locating Dowels Before Installing Cylinder Head
1985/10/01
Checking Or Adjusting Valve Clearances
1986/01/01
Cylinder Liner Seat Insert Available
1986/05/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Wider Main Bearing Cap And Higher Torque On Cap Bolts
1988/08/01
New Piston Cooling Jets Used
1988/09/01
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used
1989/04/01
New Viton Rubber Seals Used
1989/07/01
Stronger Spacer Plate Prevents Cracking
1989/08/01
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts
1989/11/01
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert
1991/08/01
New Cylinder Block And Crankshaft Used
1991/09/01
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment
1992/11/01
New Main Bearings Have Higher Fatigue Strength
1993/09/01
New O-ring Seal Used On Cylinder Block Covers
1993/10/01
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area
1993/11/01
New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01
New Cylinder Blocks Made From Stronger Alloy{1201}
1994/12/01
"Narrow Flange" Cylinder Liner Available For Service Repair {1216,1201}
1995/03/01
Improved Spacer Plate Provides Visual Indication Of Use Of "Wide Flange" Cylinder Liners {1221}
1995/05/01
Information For Ordering Replacement Cylinder Block For Engine{1201}
1995/06/01
New Liner Seat Inserts Allow Cylinder Blocks With Deeper Liner Seat Cracks To Be Salvaged{1201,1217}
1995/07/01
5P-8665 Liner Puller Group Changed To Accommodate Cylinder Liner With Larger Diameter Top Flange{1216}
1995/09/01
Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/02/17
Improved Cylinder Liner Has Longer Service Life{1216}
1997/05/01
Recommended Lubrication And Torque Procedure For Main Bearing Cap Bolts {1203}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing {1221}
1998/09/01
New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
New Cylinder Liner {1216}
2003/05/01
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/01
New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25
A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
2010/12/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2013/09/12
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2011/09/14
An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
2014/09/19
Cat<SUP>&reg;</SUP> Reman Has Added New Cylinder Block Groups for Certain 3500 and G3500 Commercial Engines {1000, 1201}
2014/10/31
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Ordering &quot;Series B&quot; Replacement Cylinder Blocks for 3500 Series Engines{1201}
Ordering "Series B" Replacement Cylinder Blocks for 3500 Series Engines{1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Technical Information Bulletin
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Specifications
Oil Cooler Bypass And Cooling Jet Sequence Valves
3500 VEHICULAR ENGINES
Cylinder Block
3500 VEHICULAR ENGINES
Cylinder Liners
3500 VEHICULAR ENGINES
Cylinder Liner Projection
3500 VEHICULAR ENGINES
Connecting Rod And Main Bearing Journals
3500 VEHICULAR ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
Disassembly and Assembly
Spacer Plates
3500 VEHICULAR ENGINES
Crankshaft Main Bearings
3500 VEHICULAR ENGINES
Piston Cooling Jets
3500 VEHICULAR ENGINES
Cylinder Liners
3500 VEHICULAR ENGINES
Camshaft Bearings
3500 VEHICULAR ENGINES
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Use Of Impact Wrench To Tighten Counterweight, Main Bearing Cap And Connecting Rod Bolts{1202,1203,1218,1219,1230}
1984/03/12
Crankcase Explosion Relief Valve Kit Available{1200,1233}
1985/04/08
New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}
1985/04/22
Correct Installation Of Oil Sequence Valves{1304}
1985/04/22
Check Height Of Locating Dowels Before Installing Cylinder Head{1201}
1985/10/07
Cylinder Liner Seat Insert Available{1217,1200}
1986/05/12
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
New Sealant Used On Oil Pan Mounting Bolts{1201,1302}
1987/07/06
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Improvements To Prevent Oil Leakage At Cylinder Heads{1100,1221}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20
Wider Main Bearing Cap And Higher Torque On Cap Bolts{1201}
1988/08/15
New Piston Cooling Jets Used{1331,1200}
1988/09/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Viton Rubber Seals Used{1302,1307,1312,1306,1317,1200}
1989/07/10
Stronger Spacer Plate Prevents Cracking{1221,1350}
1989/07/24
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
New Cylinder Blocks And Crankshafts Used{1201,1202,1231}
1991/03/25
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Video Tape, SEVN1962, Shows Correct Procedures To Counterbore Top Deck Of Cylinder Block And Install Liner Insert {1201,0374,1216}
1991/07/22
New Cylinder Block And Crankshaft Used{1201,1202,1231}
1991/09/16
New Steel Plunger Used In Oil Filter Relief Valve Plunger; Use 2P4005 Oil Filters Instead Of 1R0716 Oil Filters{1315,1318}
1992/07/13
New Spacer Plate Gasket Provides Improved Sealing Around Push Rod Compartment{1221}
1992/11/16
Valve Seat Insert Removal Tools {0703,1103}
1993/02/15
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
New O-ring Seal Used On Cylinder Block Covers {1200}
1993/10/11
New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09
Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/01
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05

Caterpillar Parts SIS Catalog 3516 :

CYLINDER BLOCK GP
4P-7264 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8249 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8249 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8248 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8247 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-8247 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4668 CYLINDER BLOCK GP
CYLINDER HEAD AS
131-0410 CYLINDER HEAD AS
CYLINDER HEAD AS
131-0424 CYLINDER HEAD AS
CYLINDER HEAD AS
156-9140 CYLINDER HEAD AS
CYLINDER HEAD AS
172-0834 CYLINDER HEAD AS
CYLINDER HEAD AS
172-0839 CYLINDER HEAD AS
CYLINDER HEAD AS
242-5327 CYLINDER HEAD AS
CYLINDER HEAD AS
7E-5859 CYLINDER HEAD AS

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC