AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

116-2811 TURBOCHARGER GP FIELD INSTALLATION Type 2 FIELD INSTALLATION 3516 VEHICULAR ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LINES GP-AIR

VEHICULAR ENGINE 3516 VEHICULAR ENGINE 28Z
 3516 Engine For OEM Built Machines 28Z00613-UP SEBP1678 3516 28Z   (1982)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
SHIELD GP-HEAT
278-4749 SHIELD GP-HEAT
TURBOCHARGER GP
116-2811 TURBOCHARGER GP
TURBOCHARGER GP
116-2811 TURBOCHARGER GP
TURBOCHARGER GP
183-8807 TURBOCHARGER GP
TURBOCHARGER GP
1W-7564 TURBOCHARGER GP
TURBOCHARGER GP
1W-7564 TURBOCHARGER GP
 

#SEBP16780200
 

116-2811: TURBOCHARGER GP

116-2811 TURBOCHARGER GP
FIELD INSTALLATION
Type 2
FIELD INSTALLATION
i00481325 SEBP1678
1162811 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3513 [1] HOUSING-COMPRESSOR  
2. 2W-1351 [4] CLAMP (COMPRESSOR)  
3. 7E-0361 [1] PLATE-IDENTIFICATION (SERIAL NUMBER PLATE)  
4. 7C-0626 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
6. 3B-4505 [8] LOCKWASHER  
7. 119-4124 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP (TURBINE)  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 7W-3515 [1] NOZZLE (TURBINE)  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 6V-4297 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780201
 

183-8807: TURBOCHARGER GP

183-8807 TURBOCHARGER GP
S/N 28Z653-99999
PART OF 1W-7564 TURBOCHARGER GP
i01255853 SEBP1678
1838807 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
2. 6V-4297 [1] SEAL-O-RING  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 177-1009 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP (HOUSING)  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 7W-9932 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 2W-1351 [4] CLAMP (COMPRESSOR)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780202
 

1W-7564: TURBOCHARGER GP

1W-7564 TURBOCHARGER GP
S/N 28Z613-616
i00353331 SEBP1678
1W7564 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-9931 CY [2] TURBOCHARGER GP  
2. 1W-7822 [2] COUPLING  
3. 1W-5505 [2] GASKET-MANIFOLD  
4. 6V-4606 [8] BOLT-HIGH TEMPERATURE (5/8-11X2.75-IN)  
  6V-4605 [8] LOCKNUT (5/8-11-THD)  
  5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
5. 1W-5533 [2] ADAPTER-EXHAUST  
6. 0S-1594 [16] BOLT (3/8-16X1-IN)  
  5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780203
 

1W-7564: TURBOCHARGER GP

1W-7564 TURBOCHARGER GP
S/N 28Z617-621
i00353333 SEBP1678
1W7564 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4324 Y [2] TURBOCHARGER GP  
2. 1W-7822 [2] COUPLING  
3. 1W-5505 [2] GASKET-MANIFOLD  
4. 6V-4606 [8] BOLT-HIGH TEMPERATURE (5/8-11X2.75-IN)  
  6V-4605 [8] LOCKNUT (5/8-11-THD)  
  5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
5. 1W-5533 [2] ADAPTER-EXHAUST  
6. 2N-2765 C [16] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  034-0912 C [16] TUBE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780204
 

1W-7564: TURBOCHARGER GP

1W-7564 TURBOCHARGER GP
S/N 28Z622-652
i00353335 SEBP1678
1W7564 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0673 CY [2] TURBOCHARGER GP  
2. 1W-7822 [2] COUPLING  
3. 1W-5505 [2] GASKET-MANIFOLD  
4. 6V-4606 [8] BOLT-HIGH TEMPERATURE (5/8-11X2.75-IN)  
  6V-4605 [8] LOCKNUT (5/8-11-THD)  
  5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
5. 1W-5533 [2] ADAPTER-EXHAUST  
6. 2N-2765 [16] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  034-0912 [16] TUBE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780205
 

1W-7564: TURBOCHARGER GP

1W-7564 TURBOCHARGER GP
S/N 28Z653-99999
i01256583 SEBP1678
1W7564 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-8807 CY [2] TURBOCHARGER GP  
2. 1W-5505 [2] GASKET-MANIFOLD  
3. 6V-4606 [8] BOLT-HIGH TEMPERATURE (5/8-11X2.75-IN)  
4. 6V-4605 [8] LOCKNUT (5/8-11-THD)  
5. 5P-8247 [16] WASHER-HARD (17X32X3.5-MM THK)  
6. 1W-5533 [2] ADAPTER-EXHAUST  
7. 2N-2765 [16] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
8. 5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 1W-7822 [2] COUPLING  
10. 034-0912 [16] TUBE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780206
 

7C-4324: TURBOCHARGER GP

7C-4324 TURBOCHARGER GP
S/N 28Z617-621
PART OF 1W-7564 TURBOCHARGER GP
i00406624 SEBP1678
7C4324 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
2. 8H-3710 [4] SCREW-TAPPING (6-32X0.375-IN)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 7C-4335 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [4] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 7W-9932 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 6V-4297 [1] SEAL-O-RING  
15. 2W-1351 [4] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780207
 

7E-0673: TURBOCHARGER GP

7E-0673 TURBOCHARGER GP
S/N 28Z622-652
PART OF 1W-7564 TURBOCHARGER GP
i00397368 SEBP1678
7E0673 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
2. 2W-1351 [4] CLAMP (COMPRESSOR)  
3. 2W-1182 [1] DIFFUSER  
4. 2B-2695 [8] BOLT (5/16-18X0.875-IN)(COMPRESSOR)  
5. 3B-4505 [8] LOCKWASHER  
6. 7E-0685 Y [1] CARTRIDGE GP-TURBOCHARGER  
7. 2W-1248 [4] CLAMP (TURBINE)  
8. 2W-1266 [1] RING-RETAINING  
9. 2W-8329 [1] HOUSING  
10. 7W-9932 [1] NOZZLE  
11. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
12. 9L-3899 [8] LOCK  
13. 6V-4297 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780208
 

7W-9931: TURBOCHARGER GP

7W-9931 TURBOCHARGER GP
S/N 28Z613-616
PART OF 1W-7564 TURBOCHARGER GP
i00419423 SEBP1678
7W9931 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1087 [1] HOUSING-COMPRESSOR  
4. 2W-1182 [1] DIFFUSER  
5. 2B-2695 [8] BOLT (5/16-18X0.875-IN)  
6. 3B-4505 [8] LOCKWASHER  
7. 4W-9133 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 2W-1248 [2] CLAMP  
9. 2W-1266 [1] RING-RETAINING  
10. 2W-8329 [1] HOUSING  
11. 7W-9932 [1] NOZZLE  
12. 6V-5682 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.875-IN)  
13. 9L-3899 [8] LOCK  
14. 6V-4297 [1] SEAL-O-RING  
15. 2W-1351 [4] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP16780209
 

155-2600: ACTUATOR GP-ELECTRONIC

155-2600 ACTUATOR GP-ELECTRONIC
CANNOT BE USED WITH FUEL SHUTOFF SOLENOID, POST LOCK GOVERNOR CONTROL
AN ATTACHMENT
i00839706 SEBP1678
  For full view, you need register

Parts for your 3516 VEHICULAR ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-6722 [1] ACTUATOR AS  
  4W-8072 [1] GASKET-TOP COVER  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  8N-0117 Y [1] DRIVE GP-GOVERNOR  
  4W-5030 Y [1] FASTENER GP-FUEL INJ PUMP  
  8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Improved Turbocharger Oil Drain Elbows
1984/12/12
Clamps Removed From Turbocharger Oil Lines Group
1985/06/01
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
New Clamps And Grommets For Turbocharger Oil Lines
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Turbine Oil Seal Improved On Turbochargers
1988/08/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak
1990/03/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
Record Turbocharger Serial Number On Warranty Claims{1052}
1996/02/16
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Provide Increased Bearing Life {1052}
2000/03/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/07/24
Some Turbochargers and Turbocharger Cartridges are Difficult to Spin Before Lubricating the Center Housing for Certain Engine Applications {1052, 1053}
2015/08/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
4W5736 Turbocharger Cartridge Repair Kit{1053}
4W5736 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation
3500 VEHICULAR ENGINES
Turbocharger TV81
3500 VEHICULAR ENGINES
Turbocharger TV91 &amp; TV92
3500 VEHICULAR ENGINES
Turbocharger C153
3500 VEHICULAR ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbochargers (TV91)
3500 VEHICULAR ENGINES
Turbochargers (C153)
3500 VEHICULAR ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Improved Turbocharger Oil Drain Elbows{1307,1052}
1984/12/10
Clamps Removed From Turbocharger Oil Lines Group{1300,1307}
1985/06/10
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Grommets Added To Dampen Vibration{1307}
1987/02/16
New Clamps And Grommets For Turbocharger Oil Lines{1300,1307,1052}
1987/03/23
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Turbine Oil Seal Improved On Turbochargers{1053,1077}
1988/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
Use Care When Positioning Turbocharger Compressor Housing {1052,1060}
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Basic Turbocharger Groups And Cartridge Groups With Improved Compressor Seals, Thrust Bearings, And Hollow Shaft For Reduced Heat Soak{1053,1077}
1990/03/05
Improvements To Reduce Black Exhaust Smoke {1088,1052,1065,1264,1278,1290,7525}
1990/08/20
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3516 :

TURBOCHARGER GP
116-2811 TURBOCHARGER GP
SHIELD GP-HEAT
278-4749 SHIELD GP-HEAT
MANIFOLD GP-EXHAUST
1W-7566 MANIFOLD GP-EXHAUST
LINES GP-AIR
1W-7567 LINES GP-AIR
LINES GP-AIR
1W-7567 LINES GP-AIR
LINES GP-AIR
1W-7567 LINES GP-AIR
ELBOW GP-EXHAUST
8N-8487 ELBOW GP-EXHAUST
CARTRIDGE GP-TURBOCHARGER
7E-0687 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
183-8807 TURBOCHARGER GP
TURBOCHARGER GP
1W-7564 TURBOCHARGER GP
TURBOCHARGER GP
1W-7564 TURBOCHARGER GP
TURBOCHARGER GP
1W-7564 TURBOCHARGER GP
TURBOCHARGER GP
1W-7564 TURBOCHARGER GP
TURBOCHARGER GP
7C-4324 TURBOCHARGER GP
TURBOCHARGER GP
7E-0673 TURBOCHARGER GP
TURBOCHARGER GP
7W-9931 TURBOCHARGER GP

Truck sale:

 
719,892 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3516, mobile generator sets, Construction
298,989 
Caterpillar 3516, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar PM3516, mobile generator sets, Construction
500,000 
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3516, Stationary Generator Sets, Construction
800,000 
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.