AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

140G Motor Grader 72V10334-UP (MACHINE) POWERED BY 3306 Engine FUEL SYSTEM Caterpillar SIS



MOTOR GRADER 140G MOTOR GRADER 72V
 140G Motor Grader 72V10334-UP (MACHINE) POWERED BY 3306 Engine SEBP1709 140G 72V   (1974)

Parts group 140G:

  For full view, you need register
FUEL SYSTEM
CAMSHAFT AS
CAMSHAFT AS
2W-0255 CAMSHAFT AS
2W-0255 CAMSHAFT AS
S/N 08Z37794-99999
PART OF 2W-0256 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
CHANGEOVER GP
CHANGEOVER GP
8N-9751 CHANGEOVER GP
8N-9751 CHANGEOVER GP
S/N 08Z37794-99999
PROVIDES HEAT TO FUEL BEFORE ENTERING FUEL FILTER
Type 1
FIELD INSTALLATION
CHANGEOVER GP
8N-9751 CHANGEOVER GP
8N-9751 CHANGEOVER GP
S/N 08Z37794-99999
PROVIDES HEAT TO FUEL BEFORE ENTERING FUEL FILTER
Type 2
FIELD INSTALLATION
CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
7W-6970 CONTROL GP-FUEL RATIO
7W-6970 CONTROL GP-FUEL RATIO
S/N 72V10334-UP
PART OF 7W-7085 CONVERSION AR-ENGINE
CONTROL GP-GOVERNOR
8W-0742 CONTROL AR-GOVERNOR
8W-0742 CONTROL AR-GOVERNOR
S/N 72V10334-UP
VARIABLE HORSEPOWER
AN ATTACHMENT
CONTROL GP-GOVERNOR
8W-1990 CONTROL GP-GOVERNOR
8W-1990 CONTROL GP-GOVERNOR
S/N 72V10334-UP
PART OF 8W-1954 CHASSIS AR
CONTROL GP-GOVERNOR
8W-2864 CONTROL GP-GOVERNOR
8W-2864 CONTROL GP-GOVERNOR
S/N 72V10334-UP
DUAL H.P., FIELD CONVERSION
PART OF 8W-2863 CONVERSION AR-ENGINE
FILTER GP-FUEL
FILTER GP-PRIMARY FUEL
7W-7831 FILTER GP-PRIMARY FUEL
7W-7831 FILTER GP-PRIMARY FUEL
S/N 72V10334-UP
PART OF 7C-9760, 8N-3569 PUMP GP-FUEL TRANSFER
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
S/N 72V10334-UP
PART OF 9N-5458 PUMP GP-FUEL TRANSFER
FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
GOVERNOR GP
GOVERNOR GP
7W-1488 GOVERNOR GP
7W-1488 GOVERNOR GP
S/N 08Z37794-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
Type 1
ALSO AN ATTACHMENT
PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
Type 2
ALSO AN ATTACHMENT
LINES GP-DRAIN
LINES GP-FUEL DRAIN
2W-4012 LINES GP-FUEL DRAIN
2W-4012 LINES GP-FUEL DRAIN
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
LINES GP-FUEL
LINES GP-FUEL
5T-5032 LINES GP-FUEL
5T-5032 LINES GP-FUEL
S/N 72V10334-UP
PART OF 8W-1954 CHASSIS AR
LINES GP-FUEL DRAIN
2W-4012 LINES GP-FUEL DRAIN
2W-4012 LINES GP-FUEL DRAIN
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
S/N 08Z37794-59820
PART OF 1W-3609 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
S/N 08Z59821-63479
PART OF 1W-3609 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
S/N 08Z63480-65454
PART OF 1W-3609 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
S/N 08Z65455-99999
PART OF 1W-3609 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
1W-3609 LINES GP-FUEL INJECTION
1W-3609 LINES GP-FUEL INJECTION
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
4P-1892 LINES GP-FUEL INJECTION
4P-1892 LINES GP-FUEL INJECTION
S/N 08Z63480-65454
PART OF 1W-3008 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
4P-4195 LINES GP-FUEL INJECTION
4P-4195 LINES GP-FUEL INJECTION
S/N 08Z59821-65454
PART OF 1W-3008 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
S/N 08Z65455-99999
PART OF 1W-3008 LINES GP-FUEL INJECTION
Type 1
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
4P-9330 LINES GP-FUEL INJECTION
S/N 08Z65455-99999
PART OF 1W-3008 LINES GP-FUEL INJECTION
Type 2
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
4P-9331 LINES GP-FUEL INJECTION
4P-9331 LINES GP-FUEL INJECTION
S/N 08Z65455-99999
PART OF 1W-3008 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
7C-5551 LINES GP-FUEL INJECTION
7C-5551 LINES GP-FUEL INJECTION
S/N 08Z37794-59820
PART OF 1W-3008 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
7C-5553 LINES GP-FUEL INJECTION
7C-5553 LINES GP-FUEL INJECTION
S/N 08Z37794-63479
PART OF 1W-3008 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 08Z37794-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
HOUSING GP-FUEL PUMP
1W-3487 HOUSING GP-FUEL PUMP
1W-3487 HOUSING GP-FUEL PUMP
S/N 08Z37794-99999
PART OF 2W-0256 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
392-9232 KIT-FUEL INJECTION PUMP
392-9232 KIT-FUEL INJECTION PUMP
S/N 72V10334-UP
OPTIONAL REBUILD FUEL PUMP KIT FOR 3306 ENGINE
FOR USE WITH @@@@@ 7W-1766@@@@@, @@@@@ 2W-0820@@@@@
FIELD INSTALLATION
397-3971 KIT-FUEL INJECTION PUMP
397-3971 KIT-FUEL INJECTION PUMP
S/N 72V10334-UP
OPTIONAL FUEL PUMP REBUILD KIT FOR 3306 MACHINE ENGINE
FIELD INSTALLATION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
S/N 72V10334-UP; 08Z37794-99999
PART OF 392-9232 KIT-FUEL INJECTION PUMP, 2W-0256, 6I-2834 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
S/N 08Z37794-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
Type 1
ALSO AN ATTACHMENT
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
S/N 08Z37794-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
Type 2
ALSO AN ATTACHMENT
PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
S/N 72V10334-UP
PART OF 397-3971 KIT-FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
6I-2834 PUMP GP-FUEL INJECTION
6I-2834 PUMP GP-FUEL INJECTION
S/N 08Z37794-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
Type 1
ALSO AN ATTACHMENT
PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
2W-0258 PUMP GP-GOV & FUEL INJ
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
Type 2
ALSO AN ATTACHMENT
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
8N-6200 PUMP GP-FUEL PRIMING
8N-6200 PUMP GP-FUEL PRIMING
S/N 08Z37794-99999
PART OF 8N-6201 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
PUMP GP-FUEL PRM & PRIM FILTER
1W-5374 PUMP GP-FUEL PRM & PRIM FILTER
1W-5374 PUMP GP-FUEL PRM & PRIM FILTER
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
PUMP GP-FUEL PRM & PRIM FILTER
8N-6201 PUMP GP-FUEL PRM & PRIM FILTER
8N-6201 PUMP GP-FUEL PRM & PRIM FILTER
S/N 08Z37794-99999
PART OF 1W-5374 PUMP GP-FUEL PRM & PRIM FILTER
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
S/N 08Z37794-54788
PART OF 2W-4160 PUMP & MTG GP-FUEL TRANSFER
OPTIONAL FIELD REPLACEMENT ORDER 1-279-4980 PUMP GP-FUEL TRANSFER, 1- 0R-3537 PUMP GP-FUEL TRANSFER
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
S/N 08Z54789-99999
PART OF 2W-4160 PUMP & MTG GP-FUEL TRANSFER
OPTIONAL FIELD REPLACEMENT ORDER 1-279-4980 PUMP GP-FUEL TRANSFER, 1- 0R-3537 PUMP GP-FUEL TRANSFER
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
7C-9760 PUMP GP-FUEL TRANSFER
7C-9760 PUMP GP-FUEL TRANSFER
S/N 72V10334-UP
12 VOLT. BOOST
FIELD INSTALLATION
PUMP GP-FUEL TRANSFER
8N-3569 PUMP GP-FUEL TRANSFER
8N-3569 PUMP GP-FUEL TRANSFER
S/N 72V10334-UP
24 VOLT. BOOST
FIELD INSTALLATION
PUMP GP-FUEL TRANSFER
9N-5458 PUMP GP-FUEL TRANSFER
9N-5458 PUMP GP-FUEL TRANSFER
S/N 72V10334-UP
12 VOLT. BOOST, PROVIDES POSITIVE PRESSURE TO THE SLEEVE METERING FUEL SYSTEM COMPONENTS ON THE SUCTION SIDE OF THE FUEL TRANSFER PUMP
FIELD INSTALLATION
PUMP GP-UNIT INJECTOR HYD
297-4841 KIT-SEAL
297-4841 KIT-SEAL -SINGLE FUEL INJECTOR
S/N 72V10334-UP
FIELD INSTALLATION
SHUTOFF GP
SOLENOID GP-CONTROL
7C-3122 SOLENOID GP-CONTROL
7C-3122 SOLENOID GP-CONTROL
S/N 08Z38022-99999
24 VOLT. HORSE POWER LIMITER
PART OF 7W-1766 ENGINE AR
Type 1
AN ATTACHMENT
SOLENOID GP-CONTROL
7C-3122 SOLENOID GP-CONTROL
7C-3122 SOLENOID GP-CONTROL
S/N 08Z38022-99999
24 VOLT. HORSE POWER LIMITER
PART OF 7W-1766 ENGINE AR
Type 2
AN ATTACHMENT
TANK GP-FUEL
TANK GP-FUEL
5T-6184 TANK GP-FUEL
5T-6184 TANK GP-FUEL
S/N 72V10334-UP
PART OF 8W-1954 CHASSIS AR
TORQUE CONTROL GP
TORQUE CONTROL GP
8N-7276 TORQUE CONTROL GP
8N-7276 TORQUE CONTROL GP
S/N 08Z37794-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Fuel Ratio Control - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Ratio Control - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Ratio Control - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Ratio Control - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Automatic Timing Advance - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Automatic Timing Advance - Install
3304B and 3306B Engines for Caterpillar Built Machines
Automatic Timing Advance - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Automatic Timing Advance - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
Disassembly and Assembly
Fuel Filter Base - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Disassembly and Assembly
Governor - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Governor - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Disassembly and Assembly
Fuel Injection Lines - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Operation Procedure To Avoid Overheating Of The Injector And The Loss Of The Injector Tip {1254}
2001/01/22
Special Instruction
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Disassembly and Assembly
Fuel Priming Pump - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Disassembly and Assembly
Fuel Transfer Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Transfer Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Transfer Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Service Magazine
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Tool Operating Manual
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2013/03/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.