BASIC ENGINE
FLYWHEEL GPGEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
CYLINDER HEAD GP
BASIC ENGINE
FLYWHEEL GP
#SEBP17090040
1P-9581: FLYWHEEL GP
1P-9581 FLYWHEEL GP
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
#SEBP17090041
1W-5634: GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 08Z37794-71873
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
S/N 08Z37794-71873
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1A-1135 C | [1] | BOLT (5/8-11X2-IN) | |
| 7N-2994 | [1] | WASHER (49.3X16.25X12.3-MM THK) | ||
| 2. | 7W-0508 C | [1] | GEAR-FUEL PUMP DRIVE (80-TEETH) | |
| 3. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 4. | 7N-4791 | [1] | GEAR AS-FUEL PUMP IDLER (57-TEETH) | |
| 5S-7630 | [1] | BUSHING | ||
| 5. | 5B-9079 | [1] | NUT-JAM (3/8-24-THD) | |
| 6. | 1W-4402 | [1] | GEAR-CAMSHAFT (80-TEETH) | |
| 7. | 8N-4959 | [1] | SHAFT-DRIVE IDLER | |
| 8. | 8N-4960 | [1] | PLATE-THRUST | |
| 9. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 10. | 7N-4722 | [1] | GEAR AS-IDLER (60-TEETH) | |
| 2P-1168 | [1] | BUSHING | ||
| 11. | 0S-1748 | [4] | BOLT (3/8-24X2-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090042
1W-5634: GEAR GP-FRONT
1W-5634 GEAR GP-FRONT -TIMING
S/N 08Z71874-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
S/N 08Z71874-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 7N-2994 | [1] | WASHER (49.3X16.25X12.3-MM THK) | ||
| 2. | 7W-0508 | [1] | GEAR-FUEL PUMP DRIVE (80-TEETH) | |
| 3. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 4. | 196-0029 C | [1] | GEAR AS-IDLER (57-TEETH) | |
| 195-0302 | [1] | BUSHING | ||
| 5. | 5B-9079 | [1] | NUT-JAM (3/8-24-THD) | |
| 6. | 1W-4402 | [1] | GEAR-CAMSHAFT (80-TEETH) | |
| 7. | 170-7502 C | [1] | SHAFT-DRIVE IDLER | |
| 8. | 8N-4960 | [1] | PLATE-THRUST | |
| 9. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 10. | 196-0223 | [1] | GEAR AS-IDLER (60-TEETH) | |
| 196-9988 | [1] | BUSHING | ||
| 11. | 0S-1748 | [4] | BOLT (3/8-24X2-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090043
2P-6166: HOUSING GP-FLYWHEEL
2P-6166 HOUSING GP-FLYWHEEL
S/N 08Z45327-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
S/N 08Z45327-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
#SEBP17090044
7W-9643: HOUSING GP-FLYWHEEL
7W-9643 HOUSING GP-FLYWHEEL
S/N 08Z37794-45326
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
S/N 08Z37794-45326
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
#SEBP17090045
8N-0303: HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
S/N 08Z37794-99999
PART OF 2W-0820, 2W-4487, 7W-1766 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
#SEBP17090046
398-9357: KIT-CYLINDER HEAD
398-9357 KIT-CYLINDER HEAD
S/N 72V10334-UP
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FOR USE WITH @@@@@ 2W-0820@@@@@, @@@@@ 7W-1766@@@@@
FIELD INSTALLATION
S/N 72V10334-UP
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FOR USE WITH @@@@@ 2W-0820@@@@@, @@@@@ 7W-1766@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 148-7425 | [12] | GUIDE-VALVE (STANDARD) | ||
| 154-6997 AB | GUIDE-VALVE (0.51-MM OS) | |||
| 154-6998 AB | GUIDE-VALVE (0.13-MM OS) | |||
| 107-0265 | [6] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| AB | INSERT-VALVE SEAT (0.13-MM OS, EXHAUST) | |||
| AB | INSERT-VALVE SEAT (0.25-MM OS, EXHAUST) | |||
| AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 107-0268 | [6] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 2A-4429 | [24] | LOCK-RETAINER | ||
| 8T-6762 | [3] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6763 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 1W-5300 | [12] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 7S-7144 | [12] | SPRING-VALVE | ||
| 148-7455 | [6] | VALVE-EXHAUST | ||
| 100-7860 | [6] | VALVE-INLET | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP17090047
391-8935: KIT-CYLINDER HEAD GASKET
391-8935 KIT-CYLINDER HEAD GASKET -SINGLE
S/N 72V10334-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT, AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FIELD INSTALLATION
S/N 72V10334-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT, AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1P-0451 | [1] | GASKET (TURBOCHARGER) | ||
| 5S-6735 | [2] | GASKET | ||
| 7M-7273 | [1] | GASKET (TURBOCHARGER) | ||
| 7N-0200 | [1] | GASKET | ||
| 7N-0944 | [1] | GASKET (WATER TEMPERATURE REGULATOR) | ||
| 8H-9788 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 1P-1255 | [1] | GASKET-OIL DRAIN | ||
| 1S-4810 | [2] | GASKET-OIL DRAIN (TURBOCHARGER) | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 9N-3241 | [1] | GASKET-REGULATOR HOUSING | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 1H-1023 | [6] | SEAL-O-RING | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3J-7354 | [3] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP17090048
392-0637: KIT-CYLINDER HEAD GASKET
392-0637 KIT-CYLINDER HEAD GASKET
S/N 72V10334-UP
KIT CONTAINS GASKETS, SEALS, AND BENADBLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES TURBO. GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINE WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@ 7W-1766@@@@@
FIELD INSTALLATION
S/N 72V10334-UP
KIT CONTAINS GASKETS, SEALS, AND BENADBLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES TURBO. GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINE WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@ 7W-1766@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7L-6443 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-2295 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN) | ||
| 1H-7666 | [1] | GASKET | ||
| 1P-0451 | [1] | GASKET | ||
| 5S-6735 | [2] | GASKET | ||
| 7N-0200 | [1] | GASKET | ||
| 7N-0944 | [1] | GASKET | ||
| 2F-7761 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 1P-1255 | [1] | GASKET-OIL DRAIN | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 6N-0009 | [1] | RING-METAL SEAL | ||
| 6N-0992 | [1] | RING-METAL SEAL | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP17090049
447-8653: KIT-CYLINDER HEAD GASKET
447-8653 KIT-CYLINDER HEAD GASKET
S/N 72V10334-UP
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION
S/N 72V10334-UP
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
Information:
BASIC ENGINE
FLYWHEEL GP
Reuse And Salvage Guidelines
Disassembly and Assembly
