AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-2395 CYLINDER GP-STEERING -LH S/N 72V10334-UP 57.15 MM BORE X 267.00 MM STROKE PART OF 8W-2290 CYLINDER & MTG GP-STEERING 140G


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

MOTOR GRADER 140G MOTOR GRADER 72V
 140G Motor Grader 72V10334-UP (MACHINE) POWERED BY 3306 Engine SEBP1709 140G 72V   (1974)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
9T-2483 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
CYLINDER GP-WHEEL LEAN
9T-2520 CYLINDER GP-WHEEL LEAN
 

#SEBP17090410
 

9T-2395: CYLINDER GP-STEERING

9T-2395 CYLINDER GP-STEERING -LH
S/N 72V10334-UP
57.15 MM BORE X 267.00 MM STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00122870 SEBP1709
9T2395 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2394 [1] CYLINDER AS (LH)  
  005-8639 [1] BEARING-ALIGNING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 8C-9122 [1] SEAL AS  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 8C-9131 [1] SEAL-LIP TYPE  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 J [1] SEAL-O-RING  
14. 1N-5999 [1] PLUG-O-RING  
15. 7J-0204 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  J  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17090411
 

121-9242: CYLINDER GP-WHEEL LEAN

121-9242 CYLINDER GP-WHEEL LEAN
S/N 72V10334-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i00123647 SEBP1709
1219242 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-1076 [1] CYLINDER AS  
  2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 4J-9224 J [1] RING-BACKUP  
9. 6E-4974 [1] HEAD  
10. 121-9245 [1] ROD AS  
  2G-8631 [1] BUSHING  
11. 308-1845 [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17090412
 

9T-2520: CYLINDER GP-WHEEL LEAN

9T-2520 CYLINDER GP-WHEEL LEAN
S/N 72V10334-UP
88.90 MM(3.50 IN) BORE X 149.00 MM(5.87 IN) STROKE. (CHGS 00-09)
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i00122871 SEBP1709
9T2520 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2521 [1] CYLINDER AS  
  2G-8631 [1] BUSHING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2524 [1] PISTON  
5. 5J-7013 [1] SEAL AS  
6. 7J-9885 [1] RING-WEAR  
7. 4T-6780 [1] RING-WEAR  
8. 8C-9122 [1] SEAL AS  
9. 5J-8150 [1] SEAL-U-CUP  
10. 8C-9131 [1] SEAL-LIP TYPE  
11. 9T-2525 [1] ROD AS  
  2G-8631 [1] BUSHING  
12. 6E-4939 [1] HEAD  
13. 4J-9224 [1] RING-BACKUP  
14. 2H-4145 [1] SEAL-O-RING  
15. 006-8663 [1] RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17090413
 

110-4656: DRIVE GP-CIRCLE

110-4656 DRIVE GP-CIRCLE
S/N 72V16891-UP
PART OF 8W-2281 BLADE AR
i00123131 SEBP1709
1104656 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-7339 [1] SEAL-O-RING  
2. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
3. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 9D-1491 [1] COUPLING  
5. 4H-6996 [1] PIN-SPRING  
6. 2H-9247 [1] SEAL-O-RING  
7. 1B-5174 [1] PLUG-PIPE  
8. 9D-1142 [1] WORM-CIRCLE DRIVE  
9. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
10. 8T-0336 [1] FITTING-PRESSURE RELIEF  
11. 2B-7410 [1] PLUG-PIPE  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
13. 2G-6695 [1] BRACKET  
14. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
15. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
16. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
  5K-8454 [3] BOLT (1/2-13X1.12-IN)(SELF-LOCKING)  
18. 110-4654 [1] COVER AS  
19. 106-7129 [1] BUSHING  
20. 1L-7388 [2] RING-RETAINING  
21. 5H-4909 [1] SEAL-O-RING  
22. 106-7130 [1] GEAR-WORM (36-TEETH)  
23. 9X-8887 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
24. 4F-9653 [1] SEAL-O-RING  
25. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
26. 8W-5092 [1] PINION-CIRCLE DRIVE  
27. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
  5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
28. 106-7131 [1] SHAFT  
29. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
30. 9W-6645 [1] SEAL GP-DUO-CONE  
31. 110-4655 [1] HOUSING AS  
  110-4652 [1] HOUSING  
32. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
33. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
34. 106-7128 [1] BUSHING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090414
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 72V10334-UP
Type 1
AN ATTACHMENT
i00145190 SEBP1709
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5407 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 5F-5434 [1] VALVE AS-VENT  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 C [4] BOLT (3/8-16X0.875-IN)  
  8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
21. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
22. 8D-7426 [1] BUSHING  
23. 4D-7246 [4] STUD-TAPERLOCK  
24. 6G-6122 [1] SPRING-DISC  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 1D-4609 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
32. 5K-5288 [1] SEAL GP-DUO-CONE  
33. 5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
37. 2J-3506 C [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 8W-5092 C [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 5P-8245 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
44. 2G-0475 [6] DISC (2.87MM .112IN THK)  
  2G-0478 [5] PLATE-CLUTCH (1.52MM .060IN THK)  
45. 6G-5543 B [6] SHIM (0.13-MM THK)  
  6G-5544 B [9] SHIM (0.25-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090415
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 72V10334-UP
Type 2
AN ATTACHMENT
i00145191 SEBP1709
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5976 CY [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 5F-5434 [1] VALVE AS-VENT  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
21. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
22. 8D-7426 [1] BUSHING  
23. 4D-7246 [4] STUD-TAPERLOCK  
24. 6G-6122 [1] SPRING-DISC  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 1D-4609 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
32. 9W-6645 C [1] SEAL GP-DUO-CONE  
33. 5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
37. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 8W-5092 [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 5P-8245 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
44. 6Y-7953 [6] DISC-FRICTION (2.87MM .112IN THK)  
  2G-0478 [5] PLATE-CLUTCH (1.52MM .060IN THK)  
45. 6G-5543 B [6] SHIM (0.13-MM THK)  
  6G-5544 B [9] SHIM (0.25-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090416
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 72V10334-UP
Type 3
AN ATTACHMENT
i00122144 SEBP1709
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3196 CY [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)(CIRCLE DRIVE)  
2. 1B-4038 [2] CUP-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
18. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
19. 1F-7958 C [4] NUT-FULL (1/2-13-THD)  
20. 6G-1908 [1] HOUSING AS-DRIVE  
20A. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
20B. 8D-7426 [1] BUSHING  
20C. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
20D. 8D-9804 [1] HOUSING-DRIVE  
25. 6G-5547 [1] PLATE  
26. 6G-5538 [1] COVER  
27. 6G-5539 [1] GASKET  
28. 5H-4909 [1] SEAL-O-RING  
29. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
30. 6G-5533 [1] GEAR-WORM (36-TEETH)  
31. 9X-8887 C [2] BOLT (3/4-10X3-IN)  
32. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
34. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
35. 6G-5532 [1] SHAFT-DRIVE PINION  
36. 1A-1415 [1] NUT (1-7/8-12-THD)  
37. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
38. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. 4F-9653 [1] SEAL-O-RING  
40. 261-8553 [1] PINION-CIRCLE DRIVE  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6Y-7953 [6] DISC-FRICTION  
43. 6G-5543 B [6] SHIM (0.13-MM THK)  
44. 6G-6122 [1] SPRING-DISC  
45. 2G-0478 [5] PLATE-CLUTCH  
46. 1B-4046 [2] CONE-BEARING  
47. 7D-8984 B [6] SHIM (0.007-IN THK)  
48. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
49. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
50. 8D-7424 [1] SPACER (48X81X6-MM THK)  
51. 6G-5544 B [9] SHIM (0.25-MM THK)  
52. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090417
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N 72V10334-UP
Type 4
AN ATTACHMENT
i04333089 SEBP1709
5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1585 C [4] BOLT (1/2-13X1.5-IN)  
2. 1B-5174 [1] PLUG-PIPE  
3. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
4. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
5. 2B-8293 [1] SEAL-O-RING  
6. 2G-0478 [5] PLATE-CLUTCH  
7. 2G-6695 [1] BRACKET  
8. 4H-6996 [1] PIN-SPRING  
9. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
10. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
11. 5P-8245 C [16] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
13. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
14. 6G-1908 [1] HOUSING AS-DRIVE  
14A. 8D-7426 [1] BUSHING  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
  8D-9804 [1] HOUSING-DRIVE  
15. 6G-5534 [1] COVER AS  
15A. 6G-5537 [1] BEARING  
16. 6G-5538 [1] COVER  
17. 6G-5539 [1] GASKET  
18. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
19. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
20. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
21. 178-3707 CM [3] BOLT (M16X2X50-MM)  
22. 6Y-7953 [6] DISC-FRICTION  
23. 7D-8983 B [10] SHIM (0.005-IN THK)  
24. 7D-8984 B [6] SHIM (0.007-IN THK)  
25. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
26. 8D-5054 C [3] WASHER-HARD (17X30X3-MM THK)  
27. 8D-7424 [1] SPACER (48X81X6-MM THK)  
28. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
29. 8T-0336 [1] FITTING-PRESSURE RELIEF  
30. 9D-1491 [1] COUPLING  
31. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
32. 307-1959 BC [2] SHIM (0.13-MM THK)  
33. 307-1960 BC [1] SHIM (0.25-MM THK)  
34. 307-1961 C [1] PLATE  
35. 307-1962 BC [12] SHIM (0.5-MM THK)  
36. 323-8674 [1] GEAR-WORM (36-TEETH)  
37. 323-8675 C [1] WORM-CIRCLE DRIVE  
38. 457-0799 [1] LOCKNUT  
39. 458-3867 C [1] SHAFT-DRIVE  
40. 458-3868 [1] PINION-CIRCLE DRIVE  
41. 175-7896 [1] SEAL-O-RING  
42. 1A-1415 [1] NUT (1-7/8-12-THD)  
43. 1B-4038 [2] CUP-BEARING  
44. 1B-4046 [2] CONE-BEARING  
45. 2B-0858 [1] PLUG-PIPE  
46. 2H-3935 [1] SEAL-O-RING  
47. 310-8642 [2] BOLT-LOCKING (3/4-10X3-IN)  
48. 5H-4909 [1] SEAL-O-RING  
49. 6G-6122 [1] SPRING-DISC  
50. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090418
 

6G-1925: DRIVE GP-CIRCLE

6G-1925 DRIVE GP-CIRCLE
S/N 72V10334-11240
PART OF 8W-2281 BLADE AR
i00145272 SEBP1709
6G1925 DRIVE GP-CIRCLE Parts scheme 6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5407 Y [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 3B-4508 [12] LOCKWASHER  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
  3B-4508 [4] LOCKWASHER  
17. 6G-1908 [1] HOUSING AS-DRIVE  
  8D-9804 [1] HOUSING-DRIVE  
18. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
19. 8D-7426 [1] BUSHING  
20. 4D-7246 [4] STUD-TAPERLOCK  
21. 6G-5051 [1] PINION-CIRCLE REVERSE  
22. 5F-5434 [1] VALVE AS-VENT  
23. 8D-7174 [1] COVER AS  
24. 8D-7173 [1] BUSHING  
25. 5H-4909 [1] SEAL-O-RING  
26. 0S-1625 [9] BOLT (5/8-11X2.5-IN)  
  3K-2889 [9] LOCKNUT (5/8-11-THD)  
  2S-5658 [9] WASHER-HARD (17X29X3-MM THK)  
27. 8D-5344 [1] GEAR-WORM (36-TEETH)  
28. 1D-4609 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
29. 5K-5288 [1] SEAL GP-DUO-CONE  
30. 5K-5129 [2] RING-SEALING  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 8D-7427 [1] SHAFT-DRIVE PINION  
33. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
34. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
35. 5P-6652 [4] WASHER (20X44.5X6-MM THK)  
36. 4F-9653 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090419
 

6G-1925: DRIVE GP-CIRCLE

6G-1925 DRIVE GP-CIRCLE
S/N 72V11241-16890
PART OF 8W-2281 BLADE AR
i00145273 SEBP1709
6G1925 DRIVE GP-CIRCLE Parts scheme 6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5976 YC [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6G-1908 [1] HOUSING AS-DRIVE  
  8D-9804 [1] HOUSING-DRIVE  
18. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
19. 8D-7426 [1] BUSHING  
20. 4D-7246 [4] STUD-TAPERLOCK  
21. 8W-5092 [1] PINION-CIRCLE DRIVE  
22. 5F-5434 [1] VALVE AS-VENT  
23. 8D-7174 [1] COVER AS  
24. 8D-7173 [1] BUSHING  
25. 5H-4909 [1] SEAL-O-RING  
26. 5B-6891 [9] BOLT-SPECIAL  
  2K-4821 [9] LOCKNUT (5/8-18-THD)  
  2S-5658 [9] WASHER-HARD (17X29X3-MM THK)  
27. 8D-5344 [1] GEAR-WORM (36-TEETH)  
28. 9X-8887 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
29. 5K-5288 [1] SEAL GP-DUO-CONE  
30. 5K-5129 [2] RING-SEALING  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 8D-7427 [1] SHAFT-DRIVE PINION  
33. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
34. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
35. 5P-8248 C [4] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 4F-9653 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 140G :

CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-SIDESHIFT
9T-2483 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
105-2094 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
9T-6951 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
9T-2554 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
8J-1658 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
8J-1658 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
113-7754 CYLINDER GP-RIPPER
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
CYLINDER GP-WHEEL LEAN
9T-2520 CYLINDER GP-WHEEL LEAN
DRIVE GP-CIRCLE
110-4656 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
6G-1925 DRIVE GP-CIRCLE

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.