112-5495 UNIVERSAL JOINT GP-PUMP DRIVE S/N 72V16510-UP PART OF 7D-9600 SHAFT GP-PUMP DRIVE 140G MOTOR GRADER



HYDRAULIC SYSTEM
SHAFT GP
VALVE & LINKAGE GP

MOTOR GRADER 140G MOTOR GRADER 72V
 140G Motor Grader 72V10334-UP (MACHINE) POWERED BY 3306 Engine SEBP1709 140G 72V   (1974)

HYDRAULIC SYSTEM

SHAFT GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SPIDER & BEARING GP
5T-8739 SPIDER & BEARING GP
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
 

#SEBP17090480
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 72V16510-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00123237 SEBP1709
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
2A. 027-1287 [1] FITTING-GREASE (UNIVERSAL JOINT)  
2B. 9K-2721 [2] LOCKWASHER  
2C. 6G-6623 [1] SEAL  
2D. 5H-3593 [1] RETAINER-FELT  
3. 6G-4358 [1] YOKE  
4. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP17090481
 

6G-4240: UNIVERSAL JOINT GP-PUMP DRIVE

6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 72V10334-16509
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00145320 SEBP1709
6G4240 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 5T-8739 Y [2] SPIDER & BEARING GP  
2. 3V-2431 [8] WASHER (10.2X16X2-MM THK)  
3. 6G-4358 [1] YOKE  
4. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
5. 6G-4357 [1] YOKE AS-SLIP  
6. 9K-2721 [2] LOCKWASHER  
7. 027-1287 [1] FITTING-GREASE (LUBRICATION)  
8. 5H-3593 [1] RETAINER-FELT  
9. 6G-6623 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090482
 

7I-4737: VALVE & LINKAGE GP

7I-4737 VALVE & LINKAGE GP
S/N 72V10334-UP
WING TILT, WING LIFT, BLADE TIP, SIDESHIFT, & PLOW/DOZER
AN ATTACHMENT
i00146103 SEBP1709
7I4737 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 6E-6516 Y [1] VALVE GP-CONTROL  
2. 9T-3240 Y [1] VALVE GP-BANK 5  
3. 9D-2877 [1] LEVER (WING TILT)  
  2G-7108 [1] KNOB-WING TILT  
4. 8D-5631 [1] LEVER (PLOW/DOZER)  
  2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
5. 8C-3405 [5] PIN-CLEVIS  
  3B-4607 [5] PIN-COTTER  
6. 8W-0456 [1] SHAFT  
7. 8W-2414 [5] ROD AS  
  1B-4202 [1] NUT (5/16-24-THD)  
  5T-9349 [1] ROD  
  7H-3641 [1] END-ROD (5/16-24-THD)  
8. 8D-5641 [3] BEARING  
9. 8D-5633 [1] LEVER (SIDESHIFT)  
  2G-6749 [1] KNOB-SIDESHIFT  
10. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
11. 8D-5635 [1] LEVER (BLADE TIP)  
12. 6G-4936 [2] SPACER (90-MM THK)  
13. 8D-5640 [5] BEARING  
14. 2G-7107 [1] KNOB-WING LIFT  
15. 2G-6747 [1] KNOB-BLADE TIP  
16. 8W-0457 [2] RETAINER  
17. 6L-1962 [5] NUT-JAM (3/8-24-THD)  
18. 8T-9043 [5] BOLT (5/16-18X0.875-IN)  
  3F-9556 [5] LOCKWASHER  
19. 8D-5635 [1] LEVER (WING LIFT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090483
 

7I-4738: VALVE & LINKAGE GP

7I-4738 VALVE & LINKAGE GP
S/N 72V10334-UP
PART OF 7I-4736 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00146400 SEBP1709
7I4738 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 6E-6516 Y [1] VALVE GP-CONTROL  
2. 9T-3252 Y [1] VALVE GP-BANK 6  
3. 9D-2877 [2] LEVER (PLOW/DOZER)  
4. 8D-5631 [1] LEVER (RIPPER)  
  2G-6740 [1] KNOB-RIPPER  
5. 8W-0456 [2] SHAFT  
6. 8C-3405 [6] PIN-CLEVIS  
  3B-4607 [6] PIN-COTTER  
7. 8D-5641 [4] BEARING  
8. 5T-9349 [6] ROD  
9. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
10. 8D-5633 [1] LEVER (SIDESHIFT)  
  2G-6749 [1] KNOB-SIDESHIFT  
11. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
12. 8D-5635 [2] LEVER (BLADE TIP)  
13. 6G-4936 [2] SPACER (90-MM THK)  
14. 8D-5640 [6] BEARING  
15. 2G-7107 [1] KNOB-WING LIFT  
16. 2G-6747 [1] KNOB-BLADE TIP  
17. 2G-7108 [1] KNOB-WING TILT  
18. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
19. 8T-9043 [6] BOLT (5/16-18X0.875-IN)  
  3F-9556 [6] LOCKWASHER  
20. 8W-0457 [2] RETAINER  
21. 7H-3641 [6] END-ROD (5/16-24-THD)  
  1B-4202 [6] NUT (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090484
 

8W-2282: VALVE & LINKAGE GP

8W-2282 VALVE & LINKAGE GP
S/N 72V10334-UP
BLADE LIFT, WHEEL LEAN, ARTICULATION, CENTERSHIFT, & CIRCLE DRIVE
PART OF 8W-2281 BLADE AR
i00146198 SEBP1709
8W2282 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8D-5641 [8] BEARING (THRUST)  
2. 8D-5640 [8] BEARING  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 8D-5632 [1] LEVER (BLADE LIFT)  
5. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
6. 2G-6756 [1] KNOB-WHEEL LEAN  
  8D-5633 [1] LEVER (WHEEL LEAN)  
7. 2G-6752 [1] KNOB-ARTICULATION  
  8D-5631 [1] LEVER (ARTICULATION)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 8D-5634 [1] LEVER (CENTER SHIFT)  
10. 8D-5634 [1] LEVER (BLADE LIFT)  
11. 9D-2804 [1] SHAFT  
12. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
13. 2G-6751 [1] KNOB-CIRCLE DRIVE  
14. 7H-3641 [6] END-ROD (5/16-24-THD)  
15. 8T-9043 [6] BOLT (5/16-18X0.875-IN)  
  3F-9556 [6] LOCKWASHER  
16. 2G-6757 [1] KNOB-BLADE LIFT  
17. 8W-0455 [2] RETAINER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 8D-5636 B [4] SHIM (0.254-MM THK)  
  8D-5637 B [4] SHIM (0.762-MM THK)  
21. 5T-9349 [6] ROD  
  1B-4202 [6] NUT (5/16-24-THD)  
22. 8C-3405 [6] PIN-CLEVIS  
  3B-4607 [6] PIN-COTTER  
23. 5T-9354 [2] BRACKET AS  
24. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
  7X-0590 [2] WASHER-HARD (13.5X44.5X6-MM THK)  
  8D-3786 [2] MOUNTING  
25. 9T-3226 Y [1] VALVE GP-BANK 2  
26. 2A-6896 [1] BRACKET  
27. 2A-6897 [1] BRACKET  
28. 9T-3238 Y [1] VALVE GP-BANK 4  
29. 8C-4436 [2] BOLT (1/2-13X1.375-IN)  
  5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
30. 8T-9101 C [4] BOLT (3/8-16X2.75-IN)  
  8T-2561 [4] WASHER-HARD (10.5X28.5X5-MM THK)  
  6V-8801 [4] NUT (3/8-16-THD)  
31. 8T-4226 [8] WASHER-PLATED (10.5X45X3-MM THK)  
32. 9D-7924 [4] MOUNTING AS  
33. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
34. 8W-0454 [2] SPACER (110-MM THK)  
35. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090485
 

8W-2387: VALVE & LINKAGE GP

8W-2387 VALVE & LINKAGE GP
S/N 72V10334-UP
SIDESHIFT, BLADE TIP, RIPPER
PART OF 8W-2411 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00146423 SEBP1709
8W2387 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 9T-3236 Y [1] VALVE GP-BANK 5  
2. 8C-3405 [3] PIN-CLEVIS  
3. 3B-4607 [3] PIN-COTTER  
4. 5T-9349 [3] ROD  
5. 8T-9043 [3] BOLT (5/16-18X0.875-IN)  
6. 3F-9556 [3] LOCKWASHER  
7. 8D-5631 [1] LEVER (RIPPER)  
8. 8D-5641 [1] BEARING (THRUST)  
9. 8D-5640 [3] BEARING (SLEEVE)  
10. 6L-1962 [3] NUT-JAM (3/8-24-THD)  
11. 2G-6740 [1] KNOB-RIPPER  
12. 8D-5633 [1] LEVER (SIDESHIFT)  
13. 2G-6749 [1] KNOB-SIDESHIFT  
14. 8D-5635 [1] LEVER (BLADE TIP)  
15. 2G-6747 [1] KNOB-BLADE TIP  
16. 8W-0457 [2] RETAINER  
17. 1B-4202 [3] NUT (5/16-24-THD)  
18. 7H-3641 [3] END-ROD (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090486
 

8W-2389: VALVE & LINKAGE GP

8W-2389 VALVE & LINKAGE GP
S/N 72V10334-UP
PLOW/DOZER,WING,POWER BLADE & TIP
AN ATTACHMENT
i00146217 SEBP1709
8W2389 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 9T-3254 Y [1] VALVE GP-BANK 6  
2. 9T-3240 Y [1] VALVE GP-BANK 5  
3. 9D-2877 [1] LEVER (WING TILT)  
4. 8D-5631 [1] LEVER (PLOW/DOZER)  
5. 8C-3405 [5] PIN-CLEVIS  
6. 3B-4607 [5] PIN-COTTER  
7. 5T-9349 [5] ROD  
8. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
9. 8D-5633 [1] LEVER (SIDESHIFT)  
10. 2G-6749 [1] KNOB-SIDESHIFT  
11. 8D-5635 [1] LEVER (BLADE TIP)  
12. 6G-4936 [2] SPACER (90-MM THK)  
13. 8D-5640 [5] BEARING (THRUST)  
14. 2G-7107 [1] KNOB-WING LIFT  
15. 2G-6747 [1] KNOB-BLADE TIP  
16. 2G-7108 [1] KNOB-WING TILT  
17. 6L-1962 [5] NUT-JAM (3/8-24-THD)  
18. 8T-9043 [5] BOLT (5/16-18X0.875-IN)  
19. 3F-9556 [5] LOCKWASHER  
20. 8W-0457 [1] RETAINER  
21. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
22. 8D-5641 [3] BEARING (SLEEVE)  
23. 8W-0456 [1] SHAFT  
24. 1B-4202 [5] NUT (5/16-24-THD)  
25. 7H-3641 [5] END-ROD (5/16-24-THD)  
26. 8D-5635 [1] LEVER (WING LIFT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090487
 

8W-2390: VALVE & LINKAGE GP

8W-2390 VALVE & LINKAGE GP
S/N 72V10334-UP
PLOW/DOZER, WING, POWER BLADE, TIP & SCARIFIER
AN ATTACHMENT
i00146218 SEBP1709
8W2390 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 9T-3254 Y [1] VALVE GP-BANK 6  
2. 9T-3252 Y [1] VALVE GP-BANK 6  
3. 9D-2877 C [1] LEVER (WING TILT)  
4. 8D-5631 [1] LEVER (SCARIFIER)  
5. 2G-6753 [1] KNOB-SCARIFIER  
6. 8C-3405 [6] PIN-CLEVIS  
7. 3B-4607 [6] PIN-COTTER  
8. 5T-9349 [6] ROD  
9. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
10. 8D-5633 [1] LEVER (SIDESHIFT)  
11. 2G-6749 [1] KNOB-SIDESHIFT  
12. 8D-5635 [2] LEVER (BLADE TIP)  
13. 6G-4936 [2] SPACER (90-MM THK)  
14. 8D-5640 [6] BEARING  
15. 2G-7107 [1] KNOB-WING LIFT  
16. 2G-6747 [1] KNOB-BLADE TIP  
17. 2G-7108 [1] KNOB-WING TILT  
18. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
19. 8T-9043 [6] BOLT (5/16-18X0.875-IN)  
20. 3F-9556 [6] LOCKWASHER  
21. 8W-0457 [2] RETAINER  
22. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
23. 8D-5641 [4] BEARING  
24. 8W-0456 [2] SHAFT  
25. 1B-4202 [6] NUT (5/16-24-THD)  
26. 7H-3641 [6] END-ROD (5/16-24-THD)  
27. 9D-2877 C [1] LEVER (PLOW/DOZER)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090488
 

8W-2394: VALVE & LINKAGE GP

8W-2394 VALVE & LINKAGE GP
S/N 72V10334-UP
SIDESHIFT, BLADE TIP
AN ATTACHMENT
i00146221 SEBP1709
8W2394 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8D-5640 [2] BEARING  
2. 9T-3234 Y [1] VALVE GP-BANK 4  
3. 8C-3405 [2] PIN-CLEVIS  
4. 3B-4607 [2] PIN-COTTER  
5. 5T-9349 [2] ROD  
6. 8D-5635 [1] LEVER (BLADE TIP)  
7. 2G-6747 [1] KNOB-BLADE TIP  
8. 6L-1962 [2] NUT-JAM (3/8-24-THD)  
9. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
10. 3F-9556 [2] LOCKWASHER  
11. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
12. 1B-4202 [2] NUT (5/16-24-THD)  
13. 8D-5633 [1] LEVER (SIDESHIFT)  
14. 2G-6749 [1] KNOB-SIDESHIFT  
15. 7H-3641 [2] END-ROD (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17090489
 

8W-2395: VALVE & LINKAGE GP

8W-2395 VALVE & LINKAGE GP
S/N 72V10334-UP
SIDESHIFT, BLADE TIP, SCARIFIER
AN ATTACHMENT
i00146222 SEBP1709
8W2395 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 9T-3236 Y [1] VALVE GP-BANK 5  
2. 8C-3405 [3] PIN-CLEVIS  
3. 3B-4607 [3] PIN-COTTER  
4. 5T-9349 [3] ROD  
5. 8T-9043 [3] BOLT (5/16-18X0.875-IN)  
6. 3F-9556 [3] LOCKWASHER  
7. 8D-5631 [1] LEVER (SCARIFIER)  
8. 8D-5641 [1] BEARING (THRUST)  
9. 8D-5640 [3] BEARING (SLEEVE)  
10. 6L-1962 [3] NUT-JAM (3/8-24-THD)  
11. 2G-6753 [1] KNOB-SCARIFIER  
12. 8D-5633 [1] LEVER (SIDESHIFT)  
13. 2G-6749 [1] KNOB-SIDESHIFT  
14. 8D-5635 [1] LEVER (BLADE TIP)  
15. 2G-6747 [1] KNOB-BLADE TIP  
16. 8W-0457 [2] RETAINER  
17. 1B-4202 [3] NUT (5/16-24-THD)  
18. 7H-3641 [3] END-ROD (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140G :

TANK GP-HYDRAULIC
6G-8020 TANK GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
SWIVEL GP-BLADE SHIFT
9T-5602 SWIVEL GP-BLADE SHIFT
SWIVEL GP
9T-5604 SWIVEL GP
SWASHPLATE GP
100-3416 SWASHPLATE GP
8W-2439 STEERING AR-SECONDARY
SPIDER & BEARING GP
5T-8739 SPIDER & BEARING GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
7I-4737 VALVE & LINKAGE GP
VALVE & LINKAGE GP
7I-4738 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2282 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2387 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2389 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2390 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2394 VALVE & LINKAGE GP

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT