WORK TOOLS
BLADE GPGROUND ENGAGING TOOLS (G.E.T.)
BLADE GP
IMPLEMENTS
LINK GPWORK TOOLS
BLADE GP
#SEBP17090700
9D-6425: BRACKET GP-BLADE
9D-6425 BRACKET GP-BLADE
S/N 72V10334-UP
PART OF 8W-2403, 8W-2404 BLADE AR-POWER
AN ATTACHMENT
S/N 72V10334-UP
PART OF 8W-2403, 8W-2404 BLADE AR-POWER
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-1753 | [1] | BRACKET-RAIL (RH) | |
| 2. | 6H-1717 | [24] | BOLT (1/2-13X1.125-IN) | |
| 3. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 5T-8366 | [4] | STRIP-WEAR | |
| 5. | 8W-1749 | [8] | PLATE | |
| 6. | 8D-5949 | [1] | BAR-SPREADER | |
| 7. | 7X-0452 | [4] | NUT-FULL (1-1/2-6-THD) | |
| 8. | 8W-1752 | [1] | BRACKET-RAIL (LH) | |
| 9. | 2G-3221 B | [4] | SHIM (1.6-MM THK) | |
| 2G-3219 B | [4] | SHIM (0.8-MM THK) | ||
| 10. | 2K-0419 B | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| B | USE AS REQUIRED | |||
#SEBP17090701
6D-1827: EDGE GP-BIT & CUTTING
6D-1827 EDGE GP-BIT & CUTTING
S/N 72V10334-UP
18.70 MM THICK X 203.00 MM WIDE
AN ATTACHMENT
S/N 72V10334-UP
18.70 MM THICK X 203.00 MM WIDE
AN ATTACHMENT
For full view, you need register
#SEBP17090702
6D-1837: EDGE GP-BIT & CUTTING
6D-1837 EDGE GP-BIT & CUTTING
S/N 72V10334-UP
18.70 MM (.74 IN) THICK X 203.00 MM (7.99 IN) WIDE
FOR USE WITH 12 FT BLADE
AN ATTACHMENT
S/N 72V10334-UP
18.70 MM (.74 IN) THICK X 203.00 MM (7.99 IN) WIDE
FOR USE WITH 12 FT BLADE
AN ATTACHMENT
For full view, you need register
#SEBP17090703
9D-6780: EDGE GP-BIT & CUTTING
For full view, you need register
#SEBP17090704
7T-3493: EDGE-CUTTING
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| NO SERVICEABLE PARTS | ||||
#SEBP17090705
8W-3330: EXTENSION GP-BLADE
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3F-5108 | [6] | BOLT-PLOW (5/8-11X2.25-IN) | |
| 2. | 4K-0367 | [16] | NUT-FULL (5/8-11-THD) | |
| 3. | 176-5641 | [1] | PLATE AS | |
| 4. | 4F-3658 | [10] | BOLT-PLOW (5/8-11X3-IN) | |
| 5. | 8W-2214 | [1] | EXTENSION | |
| 6. | 9W-1835 | [1] | EDGE-CUTTING | |
| 7. | 9B-1565 | [2] | SPACER (3-MM THK) | |
| 8. | 6D-7563 | [1] | ANGLE AS | |
| 9. | 9X-8880 | [2] | BOLT (5/8-11X2-IN) | |
| 10. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 11. | 176-5642 B | [1] | SPACER (2-MM THK) | |
| 12. | 176-5643 B | [2] | SPACER (1-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP17090706
8W-3332: EXTENSION GP-BLADE
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3F-5108 | [6] | BOLT-PLOW (5/8-11X2.25-IN) | |
| 2. | 4K-0367 | [16] | NUT-FULL (5/8-11-THD) | |
| 3. | 176-5640 | [1] | PLATE AS | |
| 4. | 4F-3658 C | [10] | BOLT-PLOW (5/8-11X3-IN) | |
| 5. | 8W-2213 | [1] | EXTENSION (LH) | |
| 6. | 9W-1835 C | [1] | EDGE-CUTTING | |
| 7. | 9B-1565 | [2] | SPACER (3-MM THK) | |
| 8. | 6D-7564 | [1] | ANGLE AS | |
| 9. | 9X-8880 | [2] | BOLT (5/8-11X2-IN) | |
| 10. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 11. | 176-5643 B | [2] | SPACER (1-MM THK) | |
| 12. | 176-5642 B | [1] | SPACER (2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090707
8D-5285: LIFT GP-BLADE
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-2753 C | [2] | LOCK | |
| 2. | 7F-5227 | [4] | BOLT (3/4-10X3.75-IN) | |
| 5P-8248 C | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 3. | 5T-3756 | [1] | ARM AS | |
| 4. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 5. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 6. | 9D-6583 C | [8] | SEAL-LIP TYPE | |
| 7. | 8D-1784 | [2] | PIN | |
| 8. | 9D-6584 | [1] | SEAL-LIP TYPE | |
| 9. | 8D-9849 | [1] | BAR AS | |
| 10. | 8D-6629 | [4] | BEARING | |
| 11. | 6D-4671 | [1] | STUD-BALL | |
| 12. | 9D-3311 | [2] | BUSHING | |
| 9D-3526 | [1] | SPACER | ||
| 13. | 9D-3648 | [1] | RING-RETAINING | |
| 14. | 5T-3754 C | [2] | LOCK | |
| 15. | 1D-4588 | [4] | BOLT (5/8-11X4.25-IN) | |
| 5P-8247 C | [4] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 16. | 5T-3755 | [1] | ARM AS | |
| 17. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 18. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 19. | 7D-8891 | [2] | RETAINER | |
| 20. | 7D-8884 | [2] | SEAL (PLASTIC) | |
| 7H-2444 | [2] | SEAL-O-RING (RUBBER) | ||
| 21. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK)(2.388MM THK) | |
| 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK)(1.905MM THK) | ||
| 22. | 7D-8879 | [8] | SHIM (0.127-MM THK) | |
| 7D-8881 | [6] | SHIM (0.254-MM THK) | ||
| 7D-8882 | [2] | SHIM (0.508-MM THK) | ||
| 23. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK)(2.388MM THK) | |
| 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK)(1.905MM THK) | ||
| 24. | 7D-8883 | [2] | SEAL (PLASTIC) | |
| 5F-0149 | [2] | SEAL-O-RING (RUBBER) | ||
| 25. | 2G-8238 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 26. | 2G-8233 | [1] | RING | |
| 27. | 7D-8874 | [8] | WASHER-THRUST (1.905MM THK) | |
| 7D-8873 | [4] | WASHER-THRUST (2.388MM THK) | ||
| 28. | 8D-5214 | [4] | WASHER-THRUST (2.388MM) | |
| 8D-5217 | [10] | WASHER-THRUST (1.219MM THK) | ||
| 8D-5216 | [10] | WASHER-THRUST (.762MM THK) | ||
| 29. | 8D-4689 | [2] | PIN | |
| 30. | 2G-3984 C | [1] | PLATE | |
| 31. | 9S-1366 C | [1] | BOLT (1/2-13X2.5-IN) | |
| 2M-0849 C | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 32. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 5P-8245 C | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090708
8D-5285: LIFT GP-BLADE
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-2753 | [2] | LOCK | |
| 2. | 3B-6753 C | [4] | BOLT (3/4-10X4.75-IN) | |
| 5P-8248 C | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| 2J-3506 C | [4] | NUT-FULL (3/4-10-THD) | ||
| 3. | 8W-5952 C | [1] | ARM AS | |
| 4. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 5. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 6. | 7K-9203 C | [8] | SEAL-LIP TYPE | |
| 7. | 8D-1784 | [2] | PIN | |
| 8. | 9D-6584 | [1] | SEAL-LIP TYPE | |
| 9. | 8D-9849 | [1] | BAR AS | |
| 10. | 8D-6629 | [4] | BEARING | |
| 11. | 6D-4671 | [1] | STUD-BALL | |
| 12. | 9D-3311 | [2] | BUSHING | |
| 9D-3526 | [1] | SPACER | ||
| 13. | 9D-3648 | [1] | RING-RETAINING | |
| 14. | 5T-3754 | [2] | LOCK | |
| 15. | 1A-5405 C | [4] | BOLT (5/8-11X5-IN) | |
| 5P-8247 C | [8] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 4K-0367 C | [4] | NUT-FULL (5/8-11-THD)(FULL) | ||
| 16. | 8W-5953 C | [1] | ARM AS | |
| 17. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 18. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 19. | 7D-8891 | [2] | RETAINER | |
| 20. | 7D-8884 | [2] | SEAL (PLASTIC) | |
| 7H-2444 | [2] | SEAL-O-RING (RUBBER) | ||
| 21. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK)(2.388MM THK) | |
| 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK)(1.905MM THK) | ||
| 22. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 7D-8881 B | [6] | SHIM (0.254-MM THK) | ||
| 7D-8882 B | [2] | SHIM (0.508-MM THK) | ||
| 23. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK)(2.388MM THK) | |
| 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK)(1.905MM THK) | ||
| 24. | 7D-8883 | [2] | SEAL (PLASTIC) | |
| 5F-0149 | [2] | SEAL-O-RING (RUBBER) | ||
| 25. | 2G-8238 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 26. | 2G-8233 | [1] | RING | |
| 27. | 7D-8874 | [8] | WASHER-THRUST (1.905MM THK) | |
| 7D-8873 | [4] | WASHER-THRUST (2.388MM THK) | ||
| 28. | 8D-5214 | [4] | WASHER-THRUST (2.388MM THK) | |
| 8D-5217 | [10] | WASHER-THRUST (1.219MM THK) | ||
| 8D-5216 | [10] | WASHER-THRUST (.762MM THK) | ||
| 29. | 8D-4689 | [2] | PIN | |
| 30. | 2G-3984 | [1] | PLATE | |
| 31. | 9S-1366 | [1] | BOLT (1/2-13X2.5-IN) | |
| 2M-0849 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 32. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090709
6Y-8494: LINK GP-RIPPER
6Y-8494 LINK GP-RIPPER
S/N 72V10334-16108; 72V16110-16140
PART OF 8J-6995 MOUNTING GP-RIPPER
AN ATTACHMENT
S/N 72V10334-16108; 72V16110-16140
PART OF 8J-6995 MOUNTING GP-RIPPER
AN ATTACHMENT
For full view, you need register
