WORK TOOLS
RIPPER GPSCARIFIER GP
WORK TOOLS
RIPPER GP
#SEBP17090710
8J-6995: MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
S/N 72V10334-16108
PART OF 8J-7586 RIPPER AR
AN ATTACHMENT
S/N 72V10334-16108
PART OF 8J-7586 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2J-6903 C | [4] | SPACER | |
| 2. | 8S-9191 C | [2] | BOLT (3/8-16X4-IN) | |
| 3. | 8S-9093 | [10] | BOLT (1-8X2.25-IN) | |
| 5P-8250 | [10] | WASHER (28X49X5-MM THK) | ||
| 4. | 8J-6990 | [1] | PLATE AS | |
| 5. | 2H-6488 | [2] | BOLT (1/2-13X5-IN) | |
| 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | ||
| 6. | 4K-3150 | [2] | PIN | |
| 7. | 9H-2374 | [2] | BOLT | |
| 8. | 7T-7534 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 9. | 9J-0084 | [1] | NUT | |
| 10. | 9J-5376 | [2] | EYEBOLT | |
| 11. | 9J-0090 | [2] | PIN | |
| 12. | 2K-4973 C | [4] | LOCKNUT (3/8-16-THD) | |
| 13. | 8J-7008 C | [2] | PIN | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090711
8J-6995: MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
S/N 72V10334-16108; 72V16110-16140
PART OF 8J-7586 RIPPER AR
AN ATTACHMENT
S/N 72V10334-16108; 72V16110-16140
PART OF 8J-7586 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-0404 B | [8] | WASHER (1.781X3.25X0.25-IN THK) | |
| 2. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| 3. | 7X-0403 | [10] | BOLT (1-8X2.25-IN) | |
| 8T-5361 | [10] | WASHER-HARD (28X49X5-MM THK) | ||
| 4. | 8J-6990 | [1] | PLATE AS | |
| 5. | 7X-0334 | [2] | BOLT (1/2-13X5-IN) | |
| 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | ||
| 6. | 4K-3150 | [2] | PIN | |
| 7. | 7X-0293 | [2] | BOLT (3/8-16X4.75-IN) | |
| 8. | 6Y-8494 CY | [2] | LINK GP-RIPPER | |
| 9. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 10. | 8J-7008 | [2] | PIN | |
| 11. | 9J-0090 | [2] | PIN | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17090712
8J-6995: MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
S/N 72V16109-16109; 72V16141-UP
PART OF 8J-7586 RIPPER AR
AN ATTACHMENT
S/N 72V16109-16109; 72V16141-UP
PART OF 8J-7586 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-0404 B | [8] | WASHER (1.781X3.25X0.25-IN THK) | |
| 2. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| 3. | 7X-0403 | [10] | BOLT (1-8X2.25-IN) | |
| 8T-5361 | [10] | WASHER-HARD (28X49X5-MM THK) | ||
| 4. | 8J-6990 | [1] | PLATE AS | |
| 5. | 7X-0334 | [2] | BOLT (1/2-13X5-IN) | |
| 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | ||
| 6. | 4K-3150 | [2] | PIN | |
| 7. | 7X-0293 | [2] | BOLT (3/8-16X4.75-IN) | |
| 8. | 104-4519 C | [2] | LINK AS | |
| 2K-4233 C | [1] | BOSS | ||
| 9. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 10. | 8J-7008 | [2] | PIN | |
| 11. | 9J-0090 | [2] | PIN | |
| 12. | 104-4523 C | [2] | CAM AS | |
| 13. | 6P-5647 C | [2] | BOSS | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090713
8J-7586: RIPPER AR
For full view, you need register
#SEBP17090714
8J-7024: RIPPER GP
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-3155 | [1] | CARRIAGE AS | |
| 112-3690 | [5] | HOLDER-BIT | ||
| 2. | 4K-3150 | [2] | PIN | |
| 3. | 9J-0095 | [1] | LINK AS-LOWER | |
| 4. | 3G-2579 | [4] | BEARING | |
| 6. | 1L-6931 | [4] | SCREW AS-MACHINE (1/4-20X0.5-IN) | |
| 7. | 7L-6363 | [2] | MARKER | |
| 8. | 8J-7008 | [2] | PIN | |
| 9. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | ||
| 10. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARINGS) | |
| 11. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 12. | 5P-2424 | [8] | BOLT (1/2-13X2.25-IN) | |
| 13. | 1K-6872 | [10] | LOCKNUT (1/2-13-THD) | |
| 14. | 9J-0096 | [2] | LINK AS-UPPER | |
| (EACH INCLUDES) | ||||
| 15. | 3G-2581 | [2] | BEARING | |
| 16. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 17. | 2D-0626 | [8] | SEAL | |
| 18. | 8J-1434 Y | [3] | TOOTH GP-RIPPER (STRAIGHT) | |
| 19. | 2K-0120 | [1] | PIN | |
| 20. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 21. | 2K-0703 | [1] | BAR | |
| 22. | 7X-0333 | [2] | BOLT (1/2-13X4.75-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17090715
8J-7024: RIPPER GP
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1L-6931 | [4] | SCREW AS-MACHINE (1/4-20X0.5-IN) | |
| 2. | 2K-0120 | [1] | PIN | |
| 3. | 2K-0703 | [1] | BAR | |
| 4. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING) | |
| 5. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 6. | 4K-3150 | [2] | PIN | |
| 7. | 7L-6363 | [2] | MARKER | |
| 8. | 8J-1434 Y | [3] | TOOTH GP-RIPPER (STRAIGHT) | |
| 9. | 9J-0096 | [2] | LINK AS-UPPER | |
| (EACH INCLUDES) | ||||
| 9A. | 3G-2581 | [2] | BEARING | |
| 10. | 9W-3155 | [1] | CARRIAGE AS | |
| 112-3690 | [5] | HOLDER-BIT | ||
| 11. | 172-5454 | [1] | LINK AS-LOWER | |
| 11A. | 3G-2579 | [4] | BEARING | |
| 12. | 1K-6872 | [10] | LOCKNUT (1/2-13-THD) | |
| 13. | 2D-0626 | [8] | SEAL | |
| 14. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 15. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 16. | 5P-2424 | [8] | BOLT (1/2-13X2.25-IN) | |
| 17. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 18. | 7X-0333 | [2] | BOLT (1/2-13X4.75-IN) | |
| 19. | 8J-7008 | [2] | PIN | |
| 20. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17090716
8J-7024: RIPPER GP
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2. | 2K-0120 | [1] | PIN | |
| 3. | 2K-0703 | [1] | BAR | |
| 4. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING) | |
| 5. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 6. | 4K-3150 | [2] | PIN | |
| 7. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE) | |
| 8. | 8J-1434 Y | [3] | TOOTH GP-RIPPER (STRAIGHT) | |
| 9. | 9J-0096 | [2] | LINK AS-UPPER | |
| (EACH INCLUDES) | ||||
| 9A. | 3G-2581 | [2] | BEARING | |
| 10. | 9W-3155 | [1] | CARRIAGE AS | |
| 112-3690 | [5] | HOLDER-BIT | ||
| 11. | 187-0953 | [1] | LINK AS-LOWER | |
| 11A. | 3G-2579 | [4] | BEARING | |
| 12. | 1K-6872 | [10] | LOCKNUT (1/2-13-THD) | |
| 13. | 2D-0626 | [8] | SEAL | |
| 14. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 15. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 16. | 5P-2424 | [8] | BOLT (1/2-13X2.25-IN) | |
| 17. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 18. | 7X-0333 | [2] | BOLT (1/2-13X4.75-IN) | |
| 19. | 8J-7008 | [2] | PIN | |
| 20. | 8T-9378 | [2] | BOLT (3/8-16X4-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17090717
107-8380: SCARIFIER AR
For full view, you need register
#SEBP17090718
8W-2410: SCARIFIER AR
For full view, you need register
#SEBP17090719
107-8384: SCARIFIER GP
107-8384 SCARIFIER GP
S/N 72V10334-UP
VEE TYPE
PART OF 107-8380 SCARIFIER AR
AN ATTACHMENT
S/N 72V10334-UP
VEE TYPE
PART OF 107-8380 SCARIFIER AR
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2H-3746 | [4] | BOLT (1-14X5-IN) | |
| 2. | 5P-8250 | [8] | WASHER (28X49X5-MM THK) | |
| 3. | 2K-7471 | [4] | LOCKNUT (1-14-THD) | |
| 4. | 1A-8063 | [8] | BOLT (3/4-10X2.5-IN) | |
| 5. | 5P-8248 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 6. | 6F-6992 | [4] | CAP-BALL SOCKET | |
| 7. | 8D-1268 | [2] | ARM AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-8245 | [1] | STUD-BALL | ||
| 8. | 6B-3260 | [1] | TOOL | |
| 9. | 7F-1327 B | [32] | SHIM (0.03-IN THK) | |
| 10. | 3B-8489 | [6] | FITTING-GREASE (1/8-27 PTF) | |
| 11. | 7X-0390 | [4] | BOLT (7/8-9X5-IN) | |
| 12. | 6K-0545 | [4] | LOCKNUT (7/8-9-THD) | |
| 13. | 195-7218 | [11] | SHANK | |
| 14. | 6Y-5230 | [11] | TOOTH-SCARIFIER | |
| 15. | 8X-3677 | [1] | BOLSTER AS | |
| 16. | 7F-5227 | [4] | BOLT (3/4-10X3.75-IN) | |
| 17. | 8X-3663 | [8] | WASHER (20X45X12-MM THK) | |
| 18. | 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | |
| 19. | 2G-4332 | [1] | BLOCK AS-SCARIFIER | |
| 7D-8825 | [11] | SPACER | ||
| 7D-8826 | [11] | SPACER | ||
| 20. | 9D-5516 | [2] | LINK AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-2135 | [1] | SOCKET-BALL | ||
| 21. | 7D-2196 | [2] | SLEEVE AS-LINK | |
| (EACH INCLUDES) | ||||
| 7D-2136 | [1] | SOCKET-BALL | ||
| 22. | 5D-8161 | [2] | PIN | |
| 23. | 5D-8159 | [2] | PIN AS | |
| 24. | 107-8375 | [1] | SHAFT AS | |
| 25. | 8W-0663 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 107-8374 | [2] | BEARING | ||
| 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | ||
| 26. | 4D-6086 | [2] | KEY | |
| 27. | 2G-4337 | [1] | DRAWBAR AS | |
| 2G-7728 | [2] | COLLAR | ||
| 8W-5597 | [1] | STUD-BALL | ||
| 28. | 2G-7309 | [1] | SHAFT | |
| 29. | 9X-8875 | [2] | BOLT (1/2-13X3.5-IN) | |
| 30. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 1F-7958 | [2] | NUT-FULL (1/2-13-THD) | |
| 32. | 5B-0577 | [2] | COLLAR | |
| 33. | 1B-4208 | [2] | NUT-FULL (7/8-14-THD) | |
| 34. | 108-5227 | [2] | SPACER (4-MM THK) | |
| 35. | 2G-4338 | [1] | DRAWBAR AS | |
| 2G-7728 | [2] | COLLAR | ||
| 8W-5597 | [1] | STUD-BALL | ||
| 36. | 5K-1458 | [11] | GROMMET | |
| 37. | 5K-1459 | [11] | LOCK PIN | |
| 38. | 8H-4040 | [4] | BOLT (1-1/8-12X4.5-IN) | |
| 39. | 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | |
| 40. | 3D-4904 | [4] | LOCKNUT (1-1/8-12-THD) | |
| 41. | 1A-0224 | [2] | BOLT (7/8-14X3.5-IN) | |
| 42. | 8C-6913 | [4] | WASHER-HARD (24X41.5X4-MM THK) | |
| B | USE AS REQUIRED | |||
