WORK TOOLS
SCARIFIER GPGROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOLTOOLS
GASKET & SEAL KITS
WORK TOOLS
SCARIFIER GP
#SEBP17090720
8W-0668: SCARIFIER GP
8W-0668 SCARIFIER GP
S/N 72V10334-UP
VEE TYPE
PART OF 8W-2410 SCARIFIER AR
Type 1
AN ATTACHMENT
S/N 72V10334-UP
VEE TYPE
PART OF 8W-2410 SCARIFIER AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-5516 | [2] | LINK AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-2135 | [1] | SOCKET-BALL | ||
| 2. | 7D-2196 | [2] | SLEEVE AS-LINK | |
| (EACH INCLUDES) | ||||
| 7D-2136 | [1] | SOCKET-BALL | ||
| 3. | 5D-8161 | [2] | PIN | |
| 5D-8159 | [2] | PIN AS | ||
| 4. | 6G-7746 | [1] | SHAFT | |
| 5. | 2G-4337 | [1] | DRAWBAR AS | |
| 6. | 8W-5597 | [1] | STUD-BALL | |
| 7. | 2G-7728 | [2] | COLLAR | |
| 8. | 2G-7309 | [1] | SHAFT | |
| 9. | 2G-4348 | [1] | BOLSTER AS | |
| 10. | 1D-4610 | [4] | BOLT (3/4-10X3.25-IN) | |
| 1B-4331 | [4] | NUT (3/4-10-THD) | ||
| 5P-6652 | [8] | WASHER (20X44.5X6-MM THK) | ||
| 11. | 5B-0577 | [2] | COLLAR | |
| 12. | 0L-2315 | [2] | BOLT (1/2-20X3.5-IN) | |
| 1B-4205 | [2] | NUT (1/2-20-THD) | ||
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 13. | 8X-0557 | [1] | ARM | |
| 14. | 8W-0679 | [1] | SPACER (23-MM THK) | |
| 15. | 2G-4338 | [1] | DRAWBAR AS | |
| 16. | 8W-5597 | [1] | STUD-BALL | |
| 17. | 2G-7728 | [2] | COLLAR | |
| 18. | 1A-0224 | [2] | BOLT (7/8-14X3.5-IN) | |
| 1B-4208 | [2] | NUT-FULL (7/8-14-THD) | ||
| 19. | 8H-4040 | [4] | BOLT (1-1/8-12X4.5-IN) | |
| 3D-4904 | [4] | LOCKNUT (1-1/8-12-THD) | ||
| 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | ||
| 20. | 5K-1459 | [11] | LOCK PIN | |
| 21. | 2G-4332 | [1] | BLOCK AS-SCARIFIER | |
| 22. | 6B-3260 | [1] | TOOL | |
| 23. | 5K-1458 | [11] | GROMMET | |
| 24. | 8W-0680 | [1] | SPACER (4-MM THK) | |
| 25. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 26. | 5P-8250 | [8] | WASHER (28X49X5-MM THK) | |
| 27. | 6F-6992 | [4] | CAP-BALL SOCKET | |
| 7F-1327 B | [32] | SHIM (0.03-IN THK) | ||
| 28. | 8W-0663 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8D-8572 | [1] | BUSHING | ||
| 29. | 9D-6591 | [4] | SEAL-LIP TYPE | |
| 30. | 2K-7471 | [4] | LOCKNUT (1-14-THD) | |
| 31. | 2H-3746 | [4] | BOLT (1-14X5-IN) | |
| 32. | 1A-8063 | [8] | BOLT (3/4-10X2.5-IN) | |
| 33. | 5P-8248 | [10] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 34. | 8D-0212 | [2] | ARM AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-8245 | [1] | STUD-BALL | ||
| 35. | 9F-5124 | [11] | SHANK-TOOTH | |
| 36. | 0S-1626 | [2] | BOLT (3/4-10X1.5-IN) | |
| 5D-5652 | [2] | WASHER (9.53X20.5X10-MM THK) | ||
| 37. | 2D-5572 | [11] | TOOTH-SCARIFIER | |
| B | USE AS REQUIRED | |||
#SEBP17090721
8W-0668: SCARIFIER GP
8W-0668 SCARIFIER GP
S/N 72V10334-UP
VEE TYPE
PART OF 8W-2410 SCARIFIER AR
Type 2
AN ATTACHMENT
S/N 72V10334-UP
VEE TYPE
PART OF 8W-2410 SCARIFIER AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-5516 | [2] | LINK AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-2135 | [1] | SOCKET-BALL | ||
| 2. | 7D-2196 | [2] | SLEEVE AS-LINK | |
| (EACH INCLUDES) | ||||
| 7D-2136 | [1] | SOCKET-BALL | ||
| 3. | 5D-8161 | [2] | PIN | |
| 5D-8159 | [2] | PIN AS | ||
| 4. | 6G-7746 | [1] | SHAFT | |
| 5. | 2G-4337 | [1] | DRAWBAR AS | |
| 6. | 8W-5597 | [1] | STUD-BALL | |
| 7. | 2G-7728 | [2] | COLLAR | |
| 8. | 2G-7309 | [1] | SHAFT | |
| 9. | 8X-3677 C | [1] | BOLSTER AS | |
| 10. | 7F-5227 C | [4] | BOLT (3/4-10X3.75-IN) | |
| 1B-4331 | [4] | NUT (3/4-10-THD) | ||
| 8X-3663 C | [8] | WASHER (20X45X12-MM THK) | ||
| 11. | 5B-0577 | [2] | COLLAR | |
| 12. | 0L-2315 | [2] | BOLT (1/2-20X3.5-IN) | |
| 1B-4205 | [2] | NUT (1/2-20-THD) | ||
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 13. | 8X-0557 | [1] | ARM | |
| 14. | 8W-0679 | [1] | SPACER (23-MM THK) | |
| 15. | 2G-4338 | [1] | DRAWBAR AS | |
| 16. | 8W-5597 | [1] | STUD-BALL | |
| 17. | 2G-7728 | [2] | COLLAR | |
| 18. | 1A-0224 | [2] | BOLT (7/8-14X3.5-IN) | |
| 1B-4208 | [2] | NUT-FULL (7/8-14-THD) | ||
| 19. | 8H-4040 | [4] | BOLT (1-1/8-12X4.5-IN) | |
| 3D-4904 | [4] | LOCKNUT (1-1/8-12-THD) | ||
| 3S-1349 | [4] | WASHER-HARD (31X52.5X6-MM THK) | ||
| 20. | 5K-1459 | [11] | LOCK PIN | |
| 21. | 2G-4332 | [1] | BLOCK AS-SCARIFIER | |
| 22. | 6B-3260 | [1] | TOOL | |
| 23. | 5K-1458 | [11] | GROMMET | |
| 24. | 8W-0680 | [1] | SPACER (4-MM THK) | |
| 25. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 26. | 5P-8250 | [8] | WASHER (28X49X5-MM THK) | |
| 27. | 6F-6992 | [4] | CAP-BALL SOCKET | |
| 7F-1327 B | [32] | SHIM (0.03-IN THK) | ||
| 28. | 8W-0663 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8D-8572 | [1] | BUSHING | ||
| 29. | 9D-6591 | [4] | SEAL-LIP TYPE | |
| 30. | 2K-7471 | [4] | LOCKNUT (1-14-THD) | |
| 31. | 2H-3746 | [4] | BOLT (1-14X5-IN) | |
| 32. | 1A-8063 | [8] | BOLT (3/4-10X2.5-IN) | |
| 33. | 5P-8248 | [10] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 34. | 8D-0212 | [2] | ARM AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-8245 | [1] | STUD-BALL | ||
| 35. | 9F-5124 | [11] | SHANK-TOOTH | |
| 36. | 0S-1626 | [2] | BOLT (3/4-10X1.5-IN) | |
| 5D-5652 | [2] | WASHER (9.53X20.5X10-MM THK) | ||
| 37. | 6Y-5230 C | [11] | TOOTH-SCARIFIER | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17090722
8J-1434: TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER -STRAIGHT
S/N 72V10334-UP
PART OF 8J-7024 RIPPER GP
AN ATTACHMENT
S/N 72V10334-UP
PART OF 8J-7024 RIPPER GP
AN ATTACHMENT
For full view, you need register
#SEBP17090723
4K-3330: TOOTH GP-SCARIFIER
For full view, you need register
#SEBP17090724
9D-2700: BOX GP-TOOL
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-0791 C | [1] | BOX AS-TOOL | |
| 2. | 4L-6454 C | [4] | BOLT (3/8-16X1-IN) | |
| 3. | 1D-4717 | [2] | NUT (3/8-16-THD) | |
| 4. | 5P-1075 | [10] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 5. | 5M-3062 CJ | [4] | BOLT (3/8-16X0.75-IN) | |
| 6. | 5P-8502 C | [1] | PADLOCK GP | |
| 6V-5874 AC | [1] | COVER | ||
| 5P-8500 AC | [2] | KEY | ||
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | REQUIRED ONLY ON 16G MOTOR GRADER | |||
#SEBP17090725
8T-5255: JACK-HYDRAULIC
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP17090726
115-8244: KIT-GASKET
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6I-1564 | [1] | DIAPHRAGM | ||
| 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | ||
| 6I-2002 | [1] | GASKET | ||
| 6I-2003 | [1] | GASKET | ||
| 6I-2004 | [1] | GASKET | ||
| 7N-9520 | [1] | GASKET | ||
| 144-0477 | [1] | GASKET | ||
| 150-3724 | [1] | GASKET | ||
| 150-3726 | [1] | GASKET | ||
| 150-3728 | [1] | GASKET | ||
| 150-3730 | [1] | GASKET | ||
| 150-3727 | [1] | GASKET-FUEL | ||
| 8N-5763 | [1] | SEAL | ||
| 9L-9098 | [6] | SEAL-CARBON STOP | ||
| 4N-0260 | [1] | SEAL-LIP TYPE | ||
| 138-9507 | [1] | SEAL-LIP TYPE | ||
| 1J-9671 | [2] | SEAL-O-RING | ||
| 2D-6392 | [1] | SEAL-O-RING | ||
| 2J-0157 | [1] | SEAL-O-RING | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3D-2898 | [1] | SEAL-O-RING | ||
| 3J-1907 | [5] | SEAL-O-RING | ||
| 3J-7354 | [4] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 4J-7533 | [2] | SEAL-O-RING | ||
| 4J-8997 | [1] | SEAL-O-RING | ||
| 4M-8303 | [1] | SEAL-O-RING | ||
| 5F-9144 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 5P-6620 | [1] | SEAL-O-RING | ||
| 5P-6718 | [1] | SEAL-O-RING | ||
| 5P-8210 | [1] | SEAL-O-RING | ||
| 5P-8215 | [1] | SEAL-O-RING | ||
| 5P-9757 | [1] | SEAL-O-RING | ||
| 6F-6672 | [1] | SEAL-O-RING | ||
| 6H-9691 | [1] | SEAL-O-RING | ||
| 6J-2419 | [1] | SEAL-O-RING | ||
| 7F-8607 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 8M-8515 | [1] | SEAL-O-RING | ||
| 061-9458 | [1] | SEAL-O-RING | ||
| 114-8718 | [6] | SEAL-O-RING | ||
| 175-7900 | [1] | SEAL-O-RING | ||
| 196-1804 | [1] | SEAL-O-RING | ||
| 221-9941 | [1] | SEAL-O-RING | ||
| 317-0808 | [1] | SEAL-O-RING | ||
| 6V-6921 | [1] | SEAL-RING | ||
| 8H-2778 | [1] | SEAL-RING | ||
| 271-2489 | [6] | SEAL-WASHER | ||
| 7W-4486 | [6] | WASHER (9.76X17.14X1.8-MM THK) | ||
| 8N-2637 | [1] | WASHER (21.3X29.5X1.6-MM THK) | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP17090727
149-4912: KIT-GASKET
149-4912 KIT-GASKET -SINGLE CYLINDER HEAD
S/N 72V10334-UP
FOR USE WITH @@@@@ 7W-1766@@@@@
FIELD INSTALLATION
S/N 72V10334-UP
FOR USE WITH @@@@@ 7W-1766@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5S-6735 | [2] | GASKET | ||
| 7N-0200 | [1] | GASKET | ||
| 2N-7174 | [6] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 8S-6410 | [3] | GASKET-MANIFOLD | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 4L-9564 | [1] | SEAL-O-RING | ||
| 7S-3206 | [6] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP17090728
155-1379: KIT-GASKET
155-1379 KIT-GASKET -SINGLE CYLINDER HEAD
S/N 72V10334-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD
FIELD REPLACEMENT ORDER @@@@@392-4479@@@@@
FIELD INSTALLATION
S/N 72V10334-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD
FIELD REPLACEMENT ORDER @@@@@392-4479@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 140G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1H-7666 | [1] | GASKET | ||
| 1P-0451 | [1] | GASKET | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 2W-3679 | [2] | GASKET | ||
| 5S-6735 | [3] | GASKET | ||
| 7N-0200 | [1] | GASKET | ||
| 7N-0944 | [1] | GASKET | ||
| 8H-9788 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 279-4977 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 6L-9691 | [1] | GASKET-FLANGE | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 1P-1255 | [1] | GASKET-OIL DRAIN | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 9N-3241 | [1] | GASKET-REGULATOR HOUSING | ||
| 7N-8018 | [6] | SEAL | ||
| 418-1964 | [1] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 379-0165 | [1] | SEAL | ||
| 9L-9098 | [6] | SEAL-CARBON STOP | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 4L-8337 | [4] | SEAL-O-RING | ||
| 4L-9564 | [1] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| 7W-4486 | [6] | WASHER (9.76X17.14X1.8-MM THK) | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| 114-3364 | [6] | WASHER-SPECIAL (SEALING) |
#SEBP17090729
281-0029: KIT-GASKET
For full view, you need register
