AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8W-2023 CONTROL GP-GOVERNOR S/N 87V8490-99999 PART OF 8W-1953 CHASSIS AR 120G MOTOR GRADER


FUEL SYSTEM
CONTROL GP-GOVERNOR
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
LINES GP-FUEL
LINES GP-DRAIN
LINES GP-FUEL INJECTION

MOTOR GRADER 120G MOTOR GRADER 87V
 120G Motor Grader 87V08360-UP (MACHINE) POWERED BY 3304 Engine SEBP1711 120G 87V   (1974)

FUEL SYSTEM

CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8W-2023 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8W-2023 CONTROL GP-GOVERNOR
 

#SEBP17110110
 

8W-2023: CONTROL GP-GOVERNOR

8W-2023 CONTROL GP-GOVERNOR
S/N 87V8490-99999
PART OF 8W-1953 CHASSIS AR
i00146191 SEBP1711
8W2023 CONTROL GP-GOVERNOR Parts scheme 8W2023 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-0617 [1] BOLT (1/4-20X1.375-IN)  
  9S-8750 [1] NUT-FULL (1/4-20-THD)  
2. 6V-8801 C [2] NUT (3/8-16-THD)  
3. 1S-5927 [1] LEVER-GOVERNOR CONTROL  
4. 1B-0676 C [1] PIN  
  3B-4615 C [1] PIN-COTTER  
5. 4D-4064 C [1] ROD END (3/8-24-THD)  
6. 1B-4203 [2] NUT-FULL (3/8-24-THD)  
7. 4L-6454 [12] BOLT (3/8-16X1-IN)  
8. 5T-5334 [1] COVER AS  
  9F-2978 [3] NUT-WELD (3/8-16-THD)  
9. 8D-9974 [2] GASKET  
10. 1F-5403 [1] ROD END-ADJUSTABLE  
11. 5H-0745 [1] LEVER-GOVERNOR CONTROL  
  4L-9337 [1] BOLT (3/8-16X1.5-IN)  
12. 1B-8704 [3] KEY-WOODRUFF  
13. 8T-9043 [2] BOLT (5/16-18X0.875-IN)  
  3F-9556 [2] LOCKWASHER  
14. 9D-0194 [1] LEVER  
15. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
16. 5T-3476 [1] SHAFT  
17. 4J-2667 [2] BEARING AS-NEEDLE (1.27CM)  
  7K-2135 [2] BEARING-ROLLER (1.43CM)  
18. 7H-3641 [2] END-ROD (5/16-24-THD)  
  1B-4202 [2] NUT (5/16-24-THD)  
19. 8D-9973 [2] HOUSING  
20. 9D-1611 [1] CABLE  
21. 8T-5390 [3] BOLT (3/8-16X3.5-IN)  
22. 8D-5119 [1] SHAFT  
23. 9D-0145 [1] LEVER  
24. 8D-9969 [1] COVER  
25. 5P-1075 [15] WASHER-HARD (10.2X22.5X3-MM THK)  
26. 2Y-6674 [1] ROD  
27. 4L-6459 [3] BOLT (3/8-16X2.5-IN)  
28. 5S-7382 C [1] BOLT (3/8-16X1.375-IN)  
  8T-4896 C [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
29. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
30. 6V-8801 C [3] NUT (3/8-16-THD)  
31. 8D-5126 [1] SHAFT  
32. 4D-2498 [1] LEVER  
33. 1B-8704 [3] KEY-WOODRUFF  
34. 4M-0495 [1] ROD END  
35. 1B-2578 [5] NUT (3/8-16-THD)  
36. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
37. 8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
39. 8D-6174 [1] BRACKET AS  
40. 7H-1051 [1] BUSHING-TERMINAL  
41. 9B-7237 C [1] BOLT (3/8-16X1.25-IN)  
42. 1B-4202 [4] NUT (5/16-24-THD)  
43. 3D-9609 [1] ROD END  
44. 1A-2457 [1] PIN-CLEVIS  
  3B-4607 [1] PIN-COTTER  
45. 8D-5996 [1] LEVER  
46. 6Y-7966 [1] DISC-FRICTION  
47. 6G-3505 [1] HANDLE AS  
  4F-8686 [1] BUSHING  
48. 3S-1349 C [1] WASHER-HARD (31X52.5X6-MM THK)  
49. 0L-0821 [1] SEAT-SPRING  
  5D-0998 [6] SPRING-DISC  
50. 009-3161 C [1] NUT  
  5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
51. 7H-3641 [3] END-ROD (5/16-24-THD)  
52. 2N-2766 C [1] LOCKNUT (3/8-16-THD)  
53. 8W-0328 [1] CYLINDER-DAMPER  
54. 8W-0317 [1] LEVER  
55. 0L-0829 [1] HANDLE  
56. 4V-0627 [1] ROD  
57. 8W-3589 [1] LINK AS-SPRING  
58. 4H-2186 [1] TREADLE AS  
  2M-6835 [1] PIPE  
59. 1F-7958 [3] NUT-FULL (1/2-13-THD)  
60. 8X-6935 [1] TREADLE AS  
61. 6V-5782 [3] BOLT (5/16-18X1.125-IN)  
  4M-5280 [3] NUT-PLATED FULL (5/16-18-THD)  
  8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
62. 8T-9375 [1] BOLT (3/8-16X1.75-IN)  
63. 4H-9304 [1] STUD-TAPERLOCK  
64. 8T-1760 [1] CLIP  
65. 8X-2092 [2] NUT  
66. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110111
 

7C-8995: FASTENER GP-FUEL INJ PUMP

7C-8995 FASTENER GP-FUEL INJ PUMP
S/N 07Z15863-99999
PART OF 2W-0517, 4P-4248 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00608353 SEBP1711
7C8995 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
2. 9S-4191 [1] PLUG  
3. 4F-7957 [6] BOLT (1/4-20X0.875-IN)  
4. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
5. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
6. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
7. 8B-2377 [1] BOLT (1/4-20X2-IN)  
8. 0S-1614 [2] BOLT (1/4-20X0.5-IN)  
9. 8B-2377 B [1] BOLT (1/4-20X2-IN)  
  B   USE AS REQUIRED
 

#SEBP17110112
 

2W-3286: FILTER GP-FUEL

2W-3286 FILTER GP-FUEL
S/N 07Z15863-99999
PART OF 2W-0822, 2W-4485, 4P-4247 ENGINE AR
ALSO AN ATTACHMENT
i00358653 SEBP1711
2W3286 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7230 [1] TUBE AS  
2. 8M-5857 [2] CLAMP  
3. 139-0501 [1] ELBOW  
4. 7N-9520 [1] GASKET  
5. 7N-9519 [1] BASE AS-FUEL FILTER  
6. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
7. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
8. 5M-6214 [1] PLUG-PIPE  
9. 5P-4289 [1] ELBOW  
10. 3J-1907 [2] SEAL-O-RING  
11. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
13. 5S-0003 [1] NUT (5/16-18-THD)  
14. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP17110113
 

7W-7831: FILTER GP-PRIMARY FUEL

7W-7831 FILTER GP-PRIMARY FUEL
S/N 87V8360-99999
PART OF 7C-9760, 8N-3569 PUMP GP-FUEL TRANSFER
i00145502 SEBP1711
7W7831 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-2778 [1] SEAL-RING (PRIMARY FUEL FILTER)  
2. 7W-7824 [1] BASE-FUEL FILTER  
3. 2J-0157 [1] SEAL-O-RING  
4. 7N-1628 [1] NUT (3/8-24-THD)  
5. 1L-3769 [1] RING-RETAINING  
6. 7S-9323 [1] SPRING  
7. 2H-3429 [1] RING-RETAINING  
8. 7H-9678 [1] RETAINER-ELEMENT  
9. 8H-2810 [1] CASE AS-FILTER  
10. 7W-8910 [1] FILTER ELEMENT-FUEL  
 

#SEBP17110114
 

8H-4681: FILTER GP-PRIMARY FUEL

8H-4681 FILTER GP-PRIMARY FUEL
S/N 87V8360-99999
PART OF 9N-5458 PUMP GP-FUEL TRANSFER
i00108222 SEBP1711
8H4681 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-2778 [1] SEAL-RING (PRIMARY FUEL FILTER)  
2. 1N-3583 [1] BASE-FUEL FILTER  
3. 2J-0157 [1] SEAL-O-RING  
4. 7N-1628 [1] NUT (3/8-24-THD)  
5. 1L-3769 [1] RING-RETAINING  
6. 7S-9323 [1] SPRING  
7. 2H-3429 [1] RING-RETAINING  
8. 7H-9678 [1] RETAINER-ELEMENT  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
 

#SEBP17110115
 

7W-1489: GOVERNOR GP

7W-1489 GOVERNOR GP
S/N 07Z15863-99999
PART OF 2W-0517, 4P-4248 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00122400 SEBP1711
7W1489 GOVERNOR GP Parts scheme 7W1489 GOVERNOR GP Parts scheme 7W1489 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT (8-32X0.5-IN)  
2. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
3. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 8N-2488 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 8L-5832 C [1] NUT-HEX (10-32-THD)  
8. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
9. 1W-6523 [1] PLUG  
10. 8N-3259 [1] COVER-HIGH IDLE  
  6I-2003 [1] GASKET  
11. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
12. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 3J-7354 [1] SEAL-O-RING  
14. 4N-5485 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
15. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
16. 0S-1616 [6] BOLT (1/4-20X1-IN)  
17. 7N-8780 [1] COVER AS-CONTROL  
18. 5P-3272 [1] SEAL-LIP TYPE  
19. 150-3728 [1] GASKET  
20. 3P-0009 [1] INSULATOR  
21. 1P-2497 [2] BOLT-HEAD  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
22. 8N-3258 [1] COVER-LOAD STOP  
  6I-2004 [1] GASKET  
23. 2N-0828 [2] WASHER  
24. 1N-3800 [1] SLEEVE-RACK CONTROL  
25. 6N-3504 [1] SEAT-GOVERNOR SPRING  
26. 2W-2216 [1] SPRING-LINK  
27. 2M-7819 [2] RING-RETAINING  
28. 1N-3802 [1] SEAT-SPRING  
29. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 C [1] CYLINDER AS  
  7N-7271 C [1] LEVER-CONTROL  
  3G-3835 C [1] PIN  
30. 1W-4098 C [1] PISTON-GOVERNOR SERVO  
31. 7W-0250 C [1] SLEEVE  
32. 5P-9757 [1] SEAL-O-RING  
33. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
34. 4N-2953 [1] RING-LOCK  
35. 7E-4892 [1] RACE-THRUST BEARING  
36. 7M-7219 [1] BEARING-THRUST  
37. 4W-6868 [1] RISER-GOVERNOR  
38. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
39. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM)  
  4F-6024 [2] PIN (8MM)  
40. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
41. 4N-6404 [1] RING-RETAINING  
42. 7N-8785 [1] SHAFT-PIVOT  
43. 150-3730 [1] GASKET  
44. 7N-7270 [2] SLEEVE-SPRING  
45. 7N-8821 [3] RING-RETAINING  
46. 3K-5733 [1] SPRING  
47. 8N-2501 [1] HOUSING AS-GOVERNOR  
  7E-5346 [1] VALVE AS  
48. 8N-2499 [1] SPRING-GUIDE  
49. 3D-8317 [1] RING-RETAINING  
50. 4N-0260 [1] SEAL-LIP TYPE  
51. 2F-2290 [1] PLUG-CORE  
52. 8N-3945 [1] BUSHING-TERMINAL  
53. 4N-0432 [1] BALL BEARING  
54. 2W-9996 [1] SCREW-IDLE STOP (1/4-20X1.25-IN)  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
55. 2W-7400 [1] SPRING  
56. 6V-8137 [2] SCREW-BUTTON HEAD (10-24X1-IN)  
57. 7W-2000 C [1] STOP-DETENT  
58. 2W-9305 [1] PLATE-THROTTLE  
59. 2W-6102 [1] LEVER-SPRING SEAT  
60. 8N-3168 [1] LEVER-THROTTLE  
61. 7W-1321 [1] PLATE-THROTTLE  
62. 7W-1318 [1] PLATE-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110116
 

5T-5030: LINES GP-FUEL

5T-5030 LINES GP-FUEL
S/N 87V8360-99999
PART OF 8W-1953 CHASSIS AR
i00146052 SEBP1711
5T5030 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-5072 [1] BUSHING-REDUCING  
2. 6K-1972 [1] ELBOW-FLARED  
3. 2G-4706 I [1] HOSE AS  
4. 3S-2093 C [1] STRAP-CABLE  
5. 7D-5363 C [1] CONNECTOR  
6. 9B-7237 C [2] BOLT (3/8-16X1.25-IN)  
7. 5K-5338 C [2] CLIP  
  5S-7379 C [2] BOLT (3/8-16X0.875-IN)  
8. 2S-5100 [1] VALVE-MANUAL  
9. 8N-7140 CI [1] HOSE AS  
10. 005-4362 C [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
11. 8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 5P-4620 C [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP17110117
 

4W-8837: LINES GP-FUEL DRAIN

4W-8837 LINES GP-FUEL DRAIN
S/N 07Z15863-99999
PART OF 2W-0822, 2W-4485, 4P-4247 ENGINE AR
ALSO AN ATTACHMENT
i00146030 SEBP1711
4W8837 LINES GP-FUEL DRAIN Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3980 [1] PLUG  
2. 030-7946 C [1] ELBOW  
3. 2T-0676 I [1] HOSE AS-DRAIN  
4. 030-7942 [1] ELBOW  
5. 3J-1907 [1] SEAL-O-RING  
6. 6K-9194 [1] ELBOW-FLARED  
7. 3J-7354 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP17110118
 

4P-9950: LINES GP-FUEL INJECTION

4P-9950 LINES GP-FUEL INJECTION
S/N 07Z27810-99999
PART OF 8N-8170 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00146021 SEBP1711
4P9950 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9961 [1] LINE AS-FUEL INJECTION (CYL NO. 1)  
2. 4P-9962 [1] LINE AS-FUEL INJECTION (CYL NO. 2)  
3. 1W-9169 [2] CLAMP-FUEL LINE (THREADED)  
    (3.9MM DIA HOLE)
4. 1W-9168 [3] CLAMP-FUEL LINE (NON-THREADED)  
    (5.5MM DIA HOLE)
5. 5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
6. 2W-0845 [1] BRACKET AS  
7. 9N-3388 [1] BOLT (10-24X0.75-IN)  
8. 1W-9167 [1] CLAMP AS-FUEL LINE  
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
 

#SEBP17110119
 

4P-9960: LINES GP-FUEL INJECTION

4P-9960 LINES GP-FUEL INJECTION
S/N 07Z27810-99999
PART OF 8N-8170 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00146022 SEBP1711
4P9960 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9963 [1] LINE AS-FUEL INJECTION (CYL NO. 3)  
2. 4P-9964 [1] LINE AS-FUEL INJECTION (CYL NO. 4)  
3. 1W-9169 [2] CLAMP-FUEL LINE (THREADED)  
4. 1W-9168 [4] CLAMP-FUEL LINE (NON-THREADED)  
5. 5P-4939 [2] SCREW-MACHINE (10-24X15.88-IN)  
6. 1W-9167 [2] CLAMP AS-FUEL LINE  
    (EACH INCLUDES)
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
7. 9N-3388 [1] BOLT (10-24X0.75-IN)  
8. 6C-0756 [1] BRACKET AS  
  1W-3011 [1] SPACER (10.5X22X73.5-MM THK)  
9. 4B-4274 [1] WASHER (5.5X13X1.2-MM THK)  
10. 6I-1565 [1] BRACKET AS  
  8K-2090 [1] TUBE  
11. 7M-9910 [1] SCREW-MACHINE (10-24X1-IN)  
 

Information:

Caterpillar Parts SIS Catalog 120G :

CONTROL GP-GOVERNOR
8W-2023 CONTROL GP-GOVERNOR
CHANGEOVER GP
8N-9751 CHANGEOVER GP
CHANGEOVER GP
8N-9751 CHANGEOVER GP
CAMSHAFT AS
2W-0262 CAMSHAFT AS
TURBOCHARGER GP
7N-4651 TURBOCHARGER GP
TURBOCHARGER GP
7N-4650 TURBOCHARGER GP
MUFFLER GP
6N-5252 MUFFLER GP
MUFFLER GP
4N-8297 MUFFLER GP
FASTENER GP-FUEL INJ PUMP
7C-8995 FASTENER GP-FUEL INJ PUMP
FILTER GP-FUEL
2W-3286 FILTER GP-FUEL
FILTER GP-PRIMARY FUEL
7W-7831 FILTER GP-PRIMARY FUEL
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
GOVERNOR GP
7W-1489 GOVERNOR GP
LINES GP-FUEL
5T-5030 LINES GP-FUEL
LINES GP-FUEL DRAIN
4W-8837 LINES GP-FUEL DRAIN
LINES GP-FUEL INJECTION
4P-9950 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.