AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-1704 ROTATING GP-PUMP S/N 87V8360-99999 PART OF 4T-0501, 6E-1278 PUMP GP-PISTON 120G MOTOR GRADER


HYDRAULIC SYSTEM
PUMP GP
DRIVE GP
SHAFT GP
STEERING GP
SWIVEL GP
TANK GP
SHAFT GP

MOTOR GRADER 120G MOTOR GRADER 87V
 120G Motor Grader 87V08360-UP (MACHINE) POWERED BY 3304 Engine SEBP1711 120G 87V   (1974)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-PISTON
4T-0501 PUMP GP-PISTON
PUMP GP-PISTON
6E-1278 PUMP GP-PISTON
ROTATING GP-PUMP
9T-1704 ROTATING GP-PUMP
VALVE GP-PUMP CONTROL
9T-7747 VALVE GP-PUMP CONTROL
 

#SEBP17110400
 

9T-1704: ROTATING GP-PUMP

9T-1704 ROTATING GP-PUMP
S/N 87V8360-99999
PART OF 4T-0501, 6E-1278 PUMP GP-PISTON
i00146310 SEBP1711
9T1704 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 009-2069 [1] RING  
2. 9T-7754 [1] GUIDE-OUTER  
3. 9T-7755 [1] SPRING  
4. 9T-7756 [1] GUIDE-INNER  
5. 9T-7757 [1] BARREL  
6. 9T-7758 [1] PLATE-WEAR  
7. 9T-7759 [1] PLATE-RETAINING  
8. 9T-7760 [1] SPACER-LIMITER  
9. 9T-7761 [9] PISTON  
  9T-1709 F [1] KEY  
  F   NOT SHOWN
 

#SEBP17110401
 

7D-9600: SHAFT GP-PUMP DRIVE

7D-9600 SHAFT GP-PUMP DRIVE
S/N 87V8360-9818
PART OF 8W-1953 CHASSIS AR
i00145458 SEBP1711
7D9600 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
2. 6G-4240 Y [1] UNIVERSAL JOINT GP-PUMP DRIVE  
3. 0L-0478 [4] BOLT (3/8-24X1.75-IN)  
4. 7D-9267 [1] YOKE  
5. 1B-8737 C [1] KEY-WOODRUFF  
6. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110402
 

7D-9600: SHAFT GP-PUMP DRIVE

7D-9600 SHAFT GP-PUMP DRIVE
S/N 87V9819-99999
PART OF 8W-1953 CHASSIS AR
i00122298 SEBP1711
7D9600 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
2. 112-5495 CY [1] UNIVERSAL JOINT GP-PUMP DRIVE  
3. 0L-0478 [4] BOLT (3/8-24X1.75-IN)  
4. 7D-9267 [1] YOKE  
5. 1B-8737 [1] KEY-WOODRUFF  
6. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110403
 

5T-8739: SPIDER & BEARING GP

5T-8739 SPIDER & BEARING GP
S/N 87V8360-9818
PART OF 6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
i00122149 SEBP1711
5T8739 SPIDER & BEARING GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-0538 [1] FITTING  
 

#SEBP17110404
 

8W-2437: STEERING AR-SECONDARY

8W-2437 STEERING AR-SECONDARY
S/N 87V8360-99999
WITH STARTING AR-LOW TEMPERATURE
AN ATTACHMENT
i00146232 SEBP1711
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8W-2367 Y [1] LINES GP-SECONDARY STEERING  
  5T-2295 Y [1] PUMP & MTG GP-STEERING  
  8W-2448 Y [1] WIRING GP-SECONDARY STEERING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110405
 

9T-5604: SWIVEL GP

9T-5604 SWIVEL GP
S/N 87V8360-99999
PART OF 8W-2363 LINES GP-HYDRAULIC
AN ATTACHMENT
i00089812 SEBP1711
9T5604 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 4K-1493 [2] SCREW-HOLLOW (1/2-13X1-IN)  
3. 8J-0380 [1] RETAINER  
4. 9T-5603 [1] BODY  
5. 8J-2331 [7] SEAL  
6. 2H-3928 [7] SEAL-O-RING  
7. 8J-0386 [1] ROTOR  
8. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 3H-0107 [4] SEAL-O-RING  
10. 8J-0377 [1] COVER  
11. 4J-9964 [2] SEAL  
12. 8J-2330 [2] SEAL  
  B   USE AS REQUIRED
 

#SEBP17110406
 

9T-5602: SWIVEL GP-BLADE SHIFT

9T-5602 SWIVEL GP-BLADE SHIFT
S/N 87V8360-99999
PART OF 8W-2364 LINES GP-HYDRAULIC
AN ATTACHMENT
i00146325 SEBP1711
9T5602 SWIVEL GP-BLADE SHIFT Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-4564 [1] RETAINER  
2. 4K-1493 [2] SCREW-HOLLOW (1/2-13X1-IN)  
3. 8J-5512 B [6] SHIM (0.13-MM THK)  
4. 8J-4562 [2] SEAL  
5. 8J-4561 [2] SEAL  
6. 8J-5863 [5] SEAL AS  
7. 9T-5601 [1] BODY  
8. 8J-4566 [1] ROTOR  
9. 9S-4185 [2] PLUG  
  3K-0360 [2] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP17110407
 

2G-8220: TANK & MTG GP-HYDRAULIC

2G-8220 TANK & MTG GP-HYDRAULIC
S/N 87V8360-99999
PART OF 8W-1953 CHASSIS AR
i00145040 SEBP1711
2G8220 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-8020 Y [1] TANK GP-HYDRAULIC  
2. 9M-1853 [4] MOUNTING  
3. 1B-4287 [4] WASHER (14.3X58.7X5-MM THK)  
4. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
  1D-4719 [4] NUT-FULL (1/2-13-THD)  
5. 2G-7173 [1] BRACKET  
6. 2G-7175 [2] SUPPORT AS  
    (EACH INCLUDES)
  2D-6414 [1] WASHER (9/32X1-13/32X3/16-IN THK)  
7. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
8. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 2G-7172 [1] BRACKET  
10. 6G-5279 [4] BLOCK  
11. 6F-5282 [4] BOLT (1/2-13X5.25-IN)  
  2G-8212 [4] SPACER  
12. 8F-6437 [4] WASHER (13.5X50.8X4.76-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110408
 

6G-8020: TANK GP-HYDRAULIC

6G-8020 TANK GP-HYDRAULIC
S/N 87V8360-99999
PART OF 2G-8220 TANK & MTG GP-HYDRAULIC
i00145406 SEBP1711
6G8020 TANK GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-5016 [1] PLATE  
2. 6J-1081 [1] GLASS-SIGHT  
3. 6J-1080 [1] GROMMET  
4. 6J-1079 [1] RETAINER-GLASS  
5. 2K-4973 [60] LOCKNUT (3/8-16-THD)  
6. 5M-2894 C [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 8D-5489 [1] SCREEN AS  
8. 2H-3928 [1] SEAL-O-RING  
9. 9H-6454 [1] GASKET  
10. 2D-4202 [1] PLATE  
11. 7H-1447 [1] CAP-FILLER (HYDRAULIC)  
12. 8T-2275 [1] BALL  
13. 3G-0361 [1] GASKET  
14. 9J-3047 [1] STRAINER  
15. 9D-8312 [1] TUBE AS  
16. 4F-8824 [1] SEAL-O-RING  
17. 9D-8315 [1] TUBE AS  
18. 2G-7171 [2] PLATE  
19. 5K-9107 [2] BOLT-LOCKING (3/8-16X0.75-IN)  
20. 2S-5100 [1] VALVE-MANUAL  
21. 2S-4078 [1] SEAL-O-RING  
22. 8D-8372 [2] RETAINER AS  
23. 2J-6133 [2] SPRING  
24. 1D-4676 [48] BOLT-CARRIAGE (3/8-16X0.875-IN)  
25. 9S-4185 [1] PLUG  
  3K-0360 [1] SEAL-O-RING  
26. 8D-5403 [2] SPACER  
27. 8D-4595 [2] SEAT-VALVE  
28. 9D-8538 [2] VALVE  
29. 6J-8391 [2] SPRING  
30. 8D-5401 [2] RETAINER  
31. 8D-5388 [2] BOLT-SPECIAL  
32. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
33. 1R-0719 [2] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)(DISPOSABLE)  
    -OR-
  4T-3131 A [2] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)(FIRE RES FLUIDS)  
    -OR-
  132-8875 A [2] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(HIGH EFFICIENCY)  
34. 5H-6734 [2] SEAL-O-RING  
35. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
36. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 6G-5118 [1] MANIFOLD  
38. 9S-6130 [1] PLUG  
39. 2B-0947 [4] BOLT (1/2-13X2.25-IN)  
40. 2D-5383 [1] GASKET  
41. 6G-5277 [1] COVER  
42. 8T-9407 [4] BOLT-CARRIAGE (3/8-16X1.25-IN)  
43. 8W-5713 [1] TANK AS  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110409
 

6G-4240: UNIVERSAL JOINT GP-PUMP DRIVE

6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 87V8360-9818
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00145320 SEBP1711
6G4240 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-8739 Y [2] SPIDER & BEARING GP  
2. 3V-2431 [8] WASHER (2.0MM THK)  
3. 6G-4358 [1] YOKE  
4. 0L-0478 [8] BOLT (3/8-24X1.75IN)  
5. 6G-4357 [1] YOKE AS-SLIP  
6. 9K-2721 [2] WASHER  
7. 027-1287 [1] FITTING (LUBRICATION)  
8. 5H-3593 [1] RETAINER-FELT  
9. 6G-6623 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 120G :

PUMP GP-PISTON
6E-1278 PUMP GP-PISTON
PUMP GP-PISTON
4T-0501 PUMP GP-PISTON
PUMP GP-METERING
4T-6817 PUMP GP-METERING
PUMP GP-METERING
4T-6817 PUMP GP-METERING
PUMP & MTG GP-STEERING
5T-2295 PUMP & MTG GP-STEERING
PUMP & MTG GP-STEERING
5T-2295 PUMP & MTG GP-STEERING
PUMP & MTG GP-STEERING
5T-2295 PUMP & MTG GP-STEERING
PUMP & MTG GP-PISTON
8W-6540 PUMP & MTG GP-PISTON
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SPIDER & BEARING GP
5T-8739 SPIDER & BEARING GP
8W-2437 STEERING AR-SECONDARY
SWIVEL GP
9T-5604 SWIVEL GP
SWIVEL GP-BLADE SHIFT
9T-5602 SWIVEL GP-BLADE SHIFT
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
TANK GP-HYDRAULIC
6G-8020 TANK GP-HYDRAULIC

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.