AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE S/N 87V9819-99999 PART OF 7D-9600 SHAFT GP-PUMP DRIVE 120G MOTOR GRADER


HYDRAULIC SYSTEM
SHAFT GP
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 120G MOTOR GRADER 87V
 120G Motor Grader 87V08360-UP (MACHINE) POWERED BY 3304 Engine SEBP1711 120G 87V   (1974)

HYDRAULIC SYSTEM

SHAFT GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SPIDER & BEARING GP
5T-8739 SPIDER & BEARING GP
UNIVERSAL JOINT GP-PUMP DRIVE
6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
 

#SEBP17110410
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 87V9819-99999
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00123237 SEBP1711
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
2A. 027-1287 [1] FITTING-GREASE (UNIVERSAL JOINT)  
2B. 9K-2721 [2] LOCKWASHER  
2C. 6G-6623 [1] SEAL  
2D. 5H-3593 [1] RETAINER-FELT  
3. 6G-4358 [1] YOKE  
4. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP17110411
 

7I-4737: VALVE & LINKAGE GP

7I-4737 VALVE & LINKAGE GP
S/N 87V8360-99999
WING TILT, WING LIFT, BLADE TIP, SIDESHIFT, & PLOW/DOZER
AN ATTACHMENT
i00146103 SEBP1711
7I4737 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6516 Y [1] VALVE GP-CONTROL  
2. 9T-3240 Y [1] VALVE GP-BANK 5  
3. 9D-2877 [1] LEVER (WING TILT)  
  2G-7108 [1] KNOB-WING TILT  
4. 8D-5631 [1] LEVER (PLOW/DOZER)  
  2G-6754 [1] KNOB (DOZER LIFT, PLOW)  
5. 8C-3405 [5] PIN-CLEVIS  
  3B-4607 [5] PIN-COTTER  
6. 8W-0456 [1] SHAFT  
7. 8W-2414 [5] ROD AS  
  1B-4202 [1] NUT (5/16-24-THD)  
  5T-9349 [1] ROD  
  7H-3641 [1] END-ROD (5/16-24-THD)  
8. 8D-5641 [3] BEARING  
9. 8D-5633 [1] LEVER (SIDESHIFT)  
  2G-6749 [1] KNOB-SIDESHIFT  
10. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
11. 8D-5635 [1] LEVER (BLADE TIP)  
12. 6G-4936 [2] SPACER (90-MM THK)  
13. 8D-5640 [5] BEARING  
14. 2G-7107 [1] KNOB-WING LIFT  
15. 2G-6747 [1] KNOB-BLADE TIP  
16. 8W-0457 [2] RETAINER  
17. 6L-1962 [5] NUT-JAM (3/8-24-THD)  
18. 8T-9043 [5] BOLT (5/16-18X0.875-IN)  
  3F-9556 [5] LOCKWASHER  
19. 8D-5635 [1] LEVER (WING LIFT)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110412
 

8W-2282: VALVE & LINKAGE GP

8W-2282 VALVE & LINKAGE GP
S/N 87V8360-99999
BLADE LIFT, WHEEL LEAN, ARTICULATION, CENTERSHIFT, & CIRCLE DRIVE
PART OF 8W-2324 BLADE AR
i00146198 SEBP1711
8W2282 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-5641 [8] BEARING (THRUST)  
2. 8D-5640 [8] BEARING  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 8D-5632 [1] LEVER (BLADE LIFT)  
5. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
6. 2G-6756 [1] KNOB-WHEEL LEAN  
  8D-5633 [1] LEVER (WHEEL LEAN)  
7. 2G-6752 [1] KNOB-ARTICULATION  
  8D-5631 [1] LEVER (ARTICULATION)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 8D-5634 [1] LEVER (CENTER SHIFT)  
10. 8D-5634 [1] LEVER (BLADE LIFT)  
11. 9D-2804 [1] SHAFT  
12. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
13. 2G-6751 [1] KNOB-CIRCLE DRIVE  
14. 7H-3641 [6] END-ROD (5/16-24-THD)  
15. 8T-9043 [6] BOLT (5/16-18X0.875-IN)  
  3F-9556 [6] LOCKWASHER  
16. 2G-6757 [1] KNOB-BLADE LIFT  
17. 8W-0455 [2] RETAINER  
18. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
19. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 8D-5636 B [4] SHIM (0.254-MM THK)  
  8D-5637 B [4] SHIM (0.762-MM THK)  
21. 5T-9349 [6] ROD  
  1B-4202 [6] NUT (5/16-24-THD)  
22. 8C-3405 [6] PIN-CLEVIS  
  3B-4607 [6] PIN-COTTER  
23. 5T-9354 [2] BRACKET AS  
24. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
  7X-0590 [2] WASHER-HARD (13.5X44.5X6-MM THK)  
  8D-3786 [2] MOUNTING  
25. 9T-3226 Y [1] VALVE GP-BANK 2  
26. 2A-6896 [1] BRACKET  
27. 2A-6897 [1] BRACKET  
28. 9T-3238 Y [1] VALVE GP-BANK 4  
29. 8C-4436 [2] BOLT (1/2-13X1.375-IN)  
  5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
30. 8T-9101 C [4] BOLT (3/8-16X2.75-IN)  
  8T-2561 [4] WASHER-HARD (10.5X28.5X5-MM THK)  
  6V-8801 [4] NUT (3/8-16-THD)  
31. 8T-4226 [8] WASHER-PLATED (10.5X45X3-MM THK)  
32. 9D-7924 [4] MOUNTING AS  
33. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
34. 8W-0454 [2] SPACER (110-MM THK)  
35. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110413
 

8W-2392: VALVE & LINKAGE GP

8W-2392 VALVE & LINKAGE GP
S/N 87V8360-99999
SIDESHIFT
AN ATTACHMENT
i00146219 SEBP1711
8W2392 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-5640 [1] BEARING  
2. 9T-3228 Y [1] VALVE GP-BANK 3  
3. 8C-3405 [1] PIN-CLEVIS  
4. 3B-4607 [1] PIN-COTTER  
5. 5T-9349 [1] ROD  
6. 8D-5633 [1] LEVER (SIDESHIFT)  
7. 2G-6749 [1] KNOB-SIDESHIFT  
8. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
9. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
10. 3F-9556 [1] LOCKWASHER  
11. 1B-4202 [1] NUT (5/16-24-THD)  
12. 7H-3641 [1] END-ROD (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110414
 

8W-2393: VALVE & LINKAGE GP

8W-2393 VALVE & LINKAGE GP
S/N 87V8360-99999
SIDESHIFT & SCARIFIER
AN ATTACHMENT
i00146220 SEBP1711
8W2393 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-5640 [2] BEARING (SLEEVE)  
2. 9T-3232 Y [1] VALVE GP-BANK 4  
3. 8C-3405 [2] PIN-CLEVIS  
4. 3B-4607 [2] PIN-COTTER  
5. 5T-9349 [2] ROD  
6. 8D-5631 [1] LEVER (SCARIFIER)  
7. 2G-6753 [1] KNOB-SCARIFIER  
8. 6L-1962 [2] NUT-JAM (3/8-24-THD)  
9. 8T-9043 [2] BOLT (5/16-18X0.875-IN)  
10. 3F-9556 [2] LOCKWASHER  
11. 8D-5641 [1] BEARING (THRUST)  
12. 8W-0457 [2] RETAINER  
13. 8D-5633 [1] LEVER (SIDESHIFT)  
14. 2G-6749 [1] KNOB-SIDESHIFT  
15. 1B-4202 [2] NUT (5/16-24-THD)  
16. 7H-3641 [2] END-ROD (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110415
 

8W-2394: VALVE & LINKAGE GP

8W-2394 VALVE & LINKAGE GP
S/N 87V8360-99999
SIDESHIFT, BLADE TIP
AN ATTACHMENT
i00146221 SEBP1711
8W2394 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-5640 [2] BEARING  
2. 9T-3234 Y [1] VALVE GP-BANK 4  
3. 8C-3405 [2] PIN-CLEVIS  
4. 3B-4607 [2] PIN-COTTER  
5. 5T-9349 [2] ROD  
6. 8D-5635 [1] LEVER (BLADE TIP)  
7. 2G-6747 [1] KNOB-BLADE TIP  
8. 6L-1962 [2] NUT-JAM (3/8-24-THD)  
9. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
10. 3F-9556 [2] LOCKWASHER  
11. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
12. 1B-4202 [2] NUT (5/16-24-THD)  
13. 8D-5633 [1] LEVER (SIDESHIFT)  
14. 2G-6749 [1] KNOB-SIDESHIFT  
15. 7H-3641 [2] END-ROD (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110416
 

8W-2395: VALVE & LINKAGE GP

8W-2395 VALVE & LINKAGE GP
S/N 87V8360-99999
SIDESHIFT, BLADE TIP, SCARIFIER
AN ATTACHMENT
i00146222 SEBP1711
8W2395 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3236 Y [1] VALVE GP-BANK 5  
2. 8C-3405 [3] PIN-CLEVIS  
3. 3B-4607 [3] PIN-COTTER  
4. 5T-9349 [3] ROD  
5. 8T-9043 [3] BOLT (5/16-18X0.875-IN)  
6. 3F-9556 [3] LOCKWASHER  
7. 8D-5631 [1] LEVER (SCARIFIER)  
8. 8D-5641 [1] BEARING (THRUST)  
9. 8D-5640 [3] BEARING (SLEEVE)  
10. 6L-1962 [3] NUT-JAM (3/8-24-THD)  
11. 2G-6753 [1] KNOB-SCARIFIER  
12. 8D-5633 [1] LEVER (SIDESHIFT)  
13. 2G-6749 [1] KNOB-SIDESHIFT  
14. 8D-5635 [1] LEVER (BLADE TIP)  
15. 2G-6747 [1] KNOB-BLADE TIP  
16. 8W-0457 [2] RETAINER  
17. 1B-4202 [3] NUT (5/16-24-THD)  
18. 7H-3641 [3] END-ROD (5/16-24-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110417
 

9T-3226: VALVE GP-BANK 2

9T-3226 VALVE GP-BANK 2 -LH
S/N 87V8360-99999
BLADE LIFT, CIRCLE DRIVE, BANK-2 CONTROL VALVE
PART OF 8W-2282 VALVE & LINKAGE GP
Type 1
i00146316 SEBP1711
9T3226 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8004 [2] PLUG  
  3J-1907 [2] SEAL-O-RING  
2. 6J-3134 [2] SEAL-O-RING  
3. 2K-8199 C [2] SEAL-O-RING  
4. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
5. 6V-5326 C [1] SEAL-O-RING  
6. 9T-2219 [1] MANIFOLD  
7. 9T-3204 [3] ROD  
  6V-5839 [6] WASHER (11X21X2.5-MM THK)  
  2Y-5829 M [6] NUT (M10X1.5-THD)  
8. 9T-0286 [1] COVER  
9. 9T-0110 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
10. 9T-1869 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110418
 

9T-3226: VALVE GP-BANK 2

9T-3226 VALVE GP-BANK 2 -LH
S/N 87V8360-99999
BLADE LIFT, CIRCLE DRIVE, BANK-2 CONTROL VALVE
PART OF 8W-2282 VALVE & LINKAGE GP
Type 2
i00146317 SEBP1711
9T3226 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8004 [2] PLUG  
  3J-1907 [2] SEAL-O-RING  
2. 6J-3134 [2] SEAL-O-RING  
3. 2K-8199 [2] SEAL-O-RING  
4. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
5. 6V-5326 [1] SEAL-O-RING  
6. 9T-2219 [1] MANIFOLD  
7. 6V-5839 [6] WASHER (11X21X2.5-MM THK)  
8. 9T-0286 [1] COVER  
9. 6E-3173 CY [1] VALVE GP-CONTROL (BLADE LIFT)  
10. 9T-1869 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
11. 6V-4249 CM [3] BOLT (M10X1.5X50-MM)  
12. 8T-0355 CM [3] BOLT (M10X1.5X110-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17110419
 

9T-3228: VALVE GP-BANK 3

9T-3228 VALVE GP-BANK 3
S/N 87V8360-99999
BANK-3 CONTROL VALVE, (LH BLADE LIFT, SIDESHIFT & CIRCLE DRIVE)
PART OF 8W-2392 VALVE & LINKAGE GP
AN ATTACHMENT
i00146318 SEBP1711
9T3228 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5326 C [1] SEAL-O-RING  
2. 9S-8001 [1] PLUG  
3. 2K-8199 C [2] SEAL-O-RING  
4. 9S-8004 [2] PLUG  
5. 9T-1657 [3] ROD  
6. 2Y-5829 M [6] NUT (M10X1.5-THD)  
7. 6V-5839 [6] WASHER (11X21X2.5-MM THK)  
8. 9T-2219 [1] MANIFOLD  
9. 6J-3134 [2] SEAL-O-RING  
10. 9T-0110 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
11. 9T-0286 [1] COVER  
12. 9T-1869 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
13. 9T-5020 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
14. 4J-7533 [1] SEAL-O-RING  
15. 3J-1907 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120G :

UNIVERSAL JOINT GP-PUMP DRIVE
6G-4240 UNIVERSAL JOINT GP-PUMP DRIVE
TANK GP-HYDRAULIC
6G-8020 TANK GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
2G-8220 TANK & MTG GP-HYDRAULIC
SWIVEL GP-BLADE SHIFT
9T-5602 SWIVEL GP-BLADE SHIFT
SWIVEL GP
9T-5604 SWIVEL GP
8W-2437 STEERING AR-SECONDARY
SPIDER & BEARING GP
5T-8739 SPIDER & BEARING GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
VALVE & LINKAGE GP
7I-4737 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2282 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2392 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2393 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2394 VALVE & LINKAGE GP
VALVE & LINKAGE GP
8W-2395 VALVE & LINKAGE GP
VALVE GP-BANK 2
9T-3226 VALVE GP-BANK 2
VALVE GP-BANK 2
9T-3226 VALVE GP-BANK 2

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.