AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2G-6059 BLADE GP S/N 87V8360-99999 12 FEET PART OF 8W-2420 BLADE & TIP AR-POWER, 8W-2419 BLADE AR-POWER AN ATTACHMENT 120G


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP

MOTOR GRADER 120G MOTOR GRADER 87V
 120G Motor Grader 87V08360-UP (MACHINE) POWERED BY 3304 Engine SEBP1711 120G 87V   (1974)

WORK TOOLS

BLADE GP
8W-2419 BLADE AR-POWER
8W-2421 BLADE AR-POWER
BLADE GP
2G-6059 BLADE GP
BLADE GP
8W-3840 BLADE GP
BLADE GP
8X-0404 BLADE GP
BLADE GP
9D-0740 BLADE GP
 

#SEBP17110600
 

2G-6059: BLADE GP

2G-6059 BLADE GP
S/N 87V8360-99999
12 FEET
PART OF 8W-2420 BLADE & TIP AR-POWER, 8W-2419 BLADE AR-POWER
AN ATTACHMENT
i00145941 SEBP1711
2G6059 BLADE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2768 C [1] MOLDBOARD AS  
  8W-1546 [1] MOLDBOARD  
2. 7B-5030 [2] RAIL-MOLDBOARD  
3. 4K-0367 [36] NUT-FULL (5/8-11-THD)  
4. 8E-5531 C [2] BIT-END (MOLDBOARD)  
5. 5D-9553 [2] EDGE-CUTTING  
6. 3F-5108 C [36] BOLT-PLOW (5/8-11X2.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110601
 

8W-3840: BLADE GP

8W-3840 BLADE GP
S/N 87V8360-99999
14 FEET
PART OF 8W-2422 BLADE & TIP AR-POWER, 8W-2421 BLADE AR-POWER
AN ATTACHMENT
i00146242 SEBP1711
8W3840 BLADE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2761 [1] MOLDBOARD AS  
2. 8B-3401 [2] RAIL-MOLDBOARD  
3. 3F-5108 [40] BOLT-PLOW (5/8-11X2.25-IN)  
  4K-0367 [40] NUT-FULL (5/8-11-THD)  
4. 8E-5531 C [2] BIT-END (MOLDBOARD)  
5. 5D-9554 [2] EDGE-CUTTING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110602
 

8X-0404: BLADE GP

8X-0404 BLADE GP
S/N 87V8360-99999
14 FEET
PART OF 8W-2422 BLADE & TIP AR-POWER, 8W-2421 BLADE AR-POWER
AN ATTACHMENT
i00146252 SEBP1711
8X0404 BLADE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2761 [1] MOLDBOARD AS  
2. 8B-3401 [2] RAIL-MOLDBOARD  
3. 3F-5108 [40] BOLT-PLOW (5/8-11X2.25-IN)  
  4K-0367 [40] NUT-FULL (5/8-11-THD)  
4. 8E-5531 C [2] BIT-END (MOLDBOARD)  
5. 5D-9554 [2] EDGE-CUTTING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110603
 

9D-0740: BLADE GP

9D-0740 BLADE GP
S/N 87V8360-99999
3657.6 MM
PART OF 8W-2324 BLADE AR
i00146261 SEBP1711
9D0740 BLADE GP Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2770 C [1] MOLDBOARD AS  
  8W-1546 [1] MOLDBOARD  
2. 5D-2216 [4] BRACKET  
3. 5D-2215 [8] PLATE  
4. 3F-5108 C [36] BOLT-PLOW (5/8-11X2.25-IN)  
  4K-0367 [36] NUT-FULL (5/8-11-THD)  
5. 8E-5531 C [2] BIT-END (MOLDBOARD)  
6. 5D-9553 [2] EDGE-CUTTING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110604
 

9D-6780: EDGE GP-BIT & CUTTING

9D-6780 EDGE GP-BIT & CUTTING
S/N 87V8360-99999
12 FOOT. CURVED
AN ATTACHMENT
i00146298 SEBP1711
9D6780 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1768 C [2] BIT-END (OVERLAY)  
2. 4F-3657 [6] BOLT-PLOW (5/8-11X2.75-IN)  
3. 5D-9558 [2] EDGE-CUTTING  
4. 4F-3658 C [4] BOLT-PLOW (5/8-11X3-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110605
 

7T-3493: EDGE-CUTTING

7T-3493 EDGE-CUTTING
S/N 87V8360-99999
AN ATTACHMENT AND FIELD INSTALLATION
i00815425 SEBP1711
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICEABLE PARTS
 

#SEBP17110606
 

8W-3330: EXTENSION GP-BLADE

8W-3330 EXTENSION GP-BLADE -RH
S/N 87V8360-99999
2-FT
AN ATTACHMENT
i00122503 SEBP1711
8W3330 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5641 [1] PLATE AS  
4. 4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2214 [1] EXTENSION  
6. 9W-1835 [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3.0-MM THK)  
8. 6D-7563 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP17110607
 

8W-3332: EXTENSION GP-BLADE

8W-3332 EXTENSION GP-BLADE -LH
S/N 87V8360-99999
2-FT
AN ATTACHMENT
i00122504 SEBP1711
8W3332 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5640 [1] PLATE AS  
4. 4F-3658 C [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2213 [1] EXTENSION (LH)  
6. 9W-1835 C [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3.0-MM THK)  
8. 6D-7564 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5643 B [2] SPACER (1-MM THK)  
12. 176-5642 B [1] SPACER (2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110608
 

9D-1905: LIFT GP-BLADE

9D-1905 LIFT GP-BLADE
S/N 87V8360-8495
PART OF 8W-2324 BLADE AR
i00146273 SEBP1711
9D1905 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2753 C [2] LOCK  
2. 7F-5227 [4] BOLT (3/4-10X3.75-IN)  
  5P-8248 C [4] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 8W-3834 C [1] ARM AS  
4. 9D-1511 [1] BEARING-SLEEVE  
5. 9D-1512 [1] BEARING-SLEEVE  
6. 7K-9202 C [8] SEAL-LIP TYPE  
7. 9D-1532 [2] PIN  
8. 7K-9203 C [1] SEAL-LIP TYPE  
9. 2G-5853 [1] BAR AS  
10. 8D-9296 [4] BEARING  
11. 2G-5689 [1] STUD-BALL  
12. 9D-0733 [2] BEARING  
  9D-6546 [1] SPACER (1.53-IN THK)  
13. 9D-6538 [1] RING-RETAINING  
14. 9D-1536 C [2] LOCK  
15. 2B-2006 C [4] BOLT (1/2-13X4.75-IN)  
  5P-8245 C [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  1F-7958 C [4] NUT-FULL (1/2-13-THD)  
16. 8W-3833 C [1] ARM AS  
17. 9D-1511 [1] BEARING-SLEEVE  
18. 9D-1512 [1] BEARING-SLEEVE  
19. 9D-1519 [2] RETAINER  
20. 9D-1521 [2] SEAL (PLASTIC)  
  5F-3092 [2] SEAL-O-RING (RUBBER)  
21. 9D-1524 [2] WASHER-THRUST (2.39MM THK)  
  9D-1525 [4] WASHER-THRUST (1.91MM THK)  
22. 9D-1526 [8] SHIM (0.127-MM THK)(.127MM THK)  
  9D-1527 [6] SHIM (0.254-MM THK)(.254MM THK)  
  9D-1528 [2] SHIM (0.508-MM THK)(.508MM THK)  
23. 9D-1522 [2] WASHER-THRUST (2.39MM THK)  
  9D-1523 [4] WASHER-THRUST (1.91MM THK)  
24. 9D-1520 [2] SEAL (PLASTIC)  
  1H-0474 [2] SEAL-O-RING (RUBBER)  
25. 2G-8239 [2] YOKE AS  
    (EACH INCLUDES)
26. 2G-8236 [1] RING  
27. 9D-1530 [8] WASHER-THRUST (1.91MM THK)  
  9D-1529 [4] WASHER-THRUST (58.72X114.3X2.39-MM THK)(2.39MM THK)  
28. 9D-1533 [4] WASHER-THRUST (45.24X101.6X2.39-MM THK)(2.39MM THK)  
  9D-1535 [10] WASHER-THRUST (44.8X101.6X1.22-MM THK)(1.22MM THK)  
  9D-1534 [10] WASHER-THRUST (44.83X101.6X0.76-MM THK)(.762MM THK)  
29. 9D-1531 [2] PIN  
30. 2G-3986 C [1] PLATE  
31. 9S-1366 C [1] BOLT (1/2-13X2.5-IN)  
  2M-0849 C [1] WASHER-HARD (13.5X25.5X5-MM THK)  
32. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
  5P-8245 C [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17110609
 

9D-1905: LIFT GP-BLADE

9D-1905 LIFT GP-BLADE
S/N 87V8496-99999
PART OF 8W-2324 BLADE AR
i00146274 SEBP1711
9D1905 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2753 [2] LOCK  
2. 3B-6753 C [4] BOLT (3/4-10X4.75-IN)  
  5P-8248 C [8] WASHER-HARD (20X36.5X3.5-MM THK)  
  2J-3506 C [4] NUT-FULL (3/4-10-THD)  
3. 8W-5951 C [1] ARM AS (LH)  
4. 9D-1511 [1] BEARING-SLEEVE  
5. 9D-1512 [1] BEARING-SLEEVE  
6. 9D-6582 [8] SEAL-LIP TYPE  
7. 9D-1532 [2] PIN  
8. 9D-6583 [1] SEAL-LIP TYPE  
9. 2G-5853 [1] BAR AS  
10. 8D-9296 [4] BEARING  
11. 2G-5689 [1] STUD-BALL  
12. 9D-0733 [2] BEARING  
  9D-6546 [1] SPACER (1.53-IN THK)  
13. 9D-6538 [1] RING-RETAINING  
14. 9D-1536 [2] LOCK  
15. 0S-1573 [4] BOLT (1/2-13X4-IN)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8W-5950 C [1] ARM AS (RH)  
17. 9D-1511 [1] BEARING-SLEEVE  
18. 9D-1512 [1] BEARING-SLEEVE  
19. 9D-1519 [2] RETAINER  
20. 9D-1521 [2] SEAL (PLASTIC)  
  5F-3092 [2] SEAL-O-RING (RUBBER)  
21. 9D-1524 [2] WASHER-THRUST (2.39MM THK)  
  9D-1525 [4] WASHER-THRUST (1.91MM THK)  
22. 9D-1526 [8] SHIM (0.127-MM THK)  
  9D-1527 [6] SHIM (0.254-MM THK)  
  9D-1528 [2] SHIM (0.508-MM THK)  
23. 9D-1522 [2] WASHER-THRUST (2.39MM THK)  
  9D-1523 [4] WASHER-THRUST (1.91MM THK)  
24. 9D-1520 [2] SEAL (PLASTIC)  
  1H-0474 [2] SEAL-O-RING (RUBBER)  
25. 2G-8239 [2] YOKE AS  
    (EACH INCLUDES)
26. 2G-8236 [1] RING  
27. 9D-1530 [8] WASHER-THRUST (1.91MM THK)  
  9D-1529 [4] WASHER-THRUST (58.72X114.3X2.39-MM THK)  
28. 9D-1533 [4] WASHER-THRUST (45.24X101.6X2.39-MM THK)  
  9D-1535 [10] WASHER-THRUST (44.8X101.6X1.22-MM THK)  
  9D-1534 [10] WASHER-THRUST (44.83X101.6X0.76-MM THK)  
29. 9D-1531 [2] PIN  
30. 2G-3986 [1] PLATE  
31. 9S-1366 [1] BOLT (1/2-13X2.5-IN)  
  2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
32. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog 120G :

8W-2421 BLADE AR-POWER
8W-2419 BLADE AR-POWER
8W-2324 BLADE AR
8W-2422 BLADE & TIP AR-POWER
8W-2420 BLADE & TIP AR-POWER
9W-2945 BIT-END
7D-6671 BIT GP-END
105-5183 BIT AS
BLADE GP
8W-3840 BLADE GP
BLADE GP
8X-0404 BLADE GP
BLADE GP
9D-0740 BLADE GP
EDGE GP-BIT & CUTTING
9D-6780 EDGE GP-BIT & CUTTING
7T-3493 EDGE-CUTTING
EXTENSION GP-BLADE
8W-3330 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE
LIFT GP-BLADE
9D-1905 LIFT GP-BLADE

Truck sale:

Caterpillar 120G
 
Caterpillar 120G
- motor graders
HOLT CAT
 
40,000 
Caterpillar 120G, motor graders, Construction
- motor graders
ALTORFER INC.
Caterpillar H120GCS.CW40S, hammer, Construction
18,210 
Caterpillar H120GCS.CW40S, hammer, Construction
- hammer
BERGERAT MONNOYEUR S.A.S.
Caterpillar 120G, motor graders, Construction
32,000 
Caterpillar 120G, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
 
33,500 
Caterpillar HH120GCS, hammer, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.