IMPLEMENTS
CIRCLE GPDRAWBAR GP
OPERATOR STATION
SEAT GPAIR CONDITIONER GP
IMPLEMENTS
CIRCLE GP
#SEBP17120520
6G-2943: CIRCLE GP
For full view, you need register
#SEBP17120521
6G-2943: CIRCLE GP
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-3971 | [1] | BRACKET AS | |
| 2. | 6G-2946 | [2] | STOP | |
| 3. | [1] | BEAM-BLADE | ||
| 4. | 8D-9883 | [1] | GUSSET | |
| 5. | 8D-9886 | [1] | BRACE | |
| 6. | 5T-3889 | [1] | BRACE | |
| 7. | 6G-2949 | [1] | BRACE | |
| 8. | 5T-3890 | [1] | BRACE | |
| 9. | 4D-4375 | [2] | LUG | |
| 10. | 8D-9884 | [1] | GUSSET | |
| 11. | 8D-9882 | [2] | BLOCK-FILLER | |
| 12. | [1] | BEAM-BLADE | ||
| 13. | 8D-9887 | [1] | BRACE | |
| 5T-4267 AF | [1] | SEGMENT-CIRCLE | ||
| (4 TEETH - SERVICE REPAIR FOR WORN OR DAMAGED TEETH) | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
#SEBP17120522
6G-2944: CIRCLE GP
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-2226 | [1] | BEAM-BLADE | |
| 2. | 8D-9883 | [1] | GUSSET | |
| 3. | 8D-9886 | [1] | BRACE | |
| 4. | 7B-5037 | [2] | LOCK-BOLT | |
| 5. | 6G-2949 | [1] | BRACE | |
| 6. | 5T-3890 | [1] | BRACE | |
| 7. | 4D-4375 | [2] | LUG | |
| 8. | 8D-9884 | [1] | GUSSET | |
| 9. | 8D-9882 | [2] | BLOCK-FILLER | |
| 10. | 8W-2227 | [1] | BEAM-BLADE | |
| 11. | 8D-9887 | [1] | BRACE | |
| 12. | 5T-3889 | [1] | BRACE | |
| 5T-4267 AF | [1] | SEGMENT-CIRCLE | ||
| (4 TEETH - SERVICE REPAIR FOR WORN OR DAMAGED TEETH) | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
#SEBP17120523
8D-5910: CIRCLE GP
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5552 C | [2] | BOLT-LOCKING (3/8-16X3-IN) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 2. | 6G-2943 Y | [1] | CIRCLE GP | |
| 3. | 8W-5232 C | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0748 | [1] | NUT-WELD (1/2-13-THD)(WELD) | ||
| 4. | 5P-8245 | [34] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 5. | 4B-5273 C | [4] | WASHER (14.3X35X2.5-MM THK) | |
| 6. | 8W-5226 C | [1] | GUARD AS | |
| 7. | 6H-1717 C | [30] | BOLT (1/2-13X1.125-IN) | |
| 8. | 5T-8367 | [1] | STRIP-WEAR | |
| 9. | 8W-1751 | [1] | BRACKET AS | |
| 10. | 9X-8881 | [2] | BOLT (5/8-11X2.25-IN) | |
| 9X-8883 | [2] | BOLT (5/8-11X2.75-IN) | ||
| 5P-8247 | [4] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 11. | 9D-8285 | [1] | CAP | |
| 12. | 8W-5228 C | [1] | GUARD AS | |
| 13. | 5T-8366 | [4] | STRIP-WEAR | |
| 14. | 8W-1749 | [10] | PLATE | |
| 15. | 2G-3221 B | [5] | SHIM (1.6-MM THK) | |
| 2G-3219 B | [5] | SHIM (0.8-MM THK) | ||
| 16. | 8D-5949 | [1] | BAR-SPREADER | |
| 17. | 2B-2673 | [2] | NUT-CASTLE (1-3/4-5-THD) | |
| 1D-0503 | [2] | WASHER (45.25X76.2X6.35-MM THK) | ||
| 3B-4647 | [2] | PIN-COTTER | ||
| 18. | 7F-0482 | [4] | NUT-FULL (1-1/2-6-THD) | |
| 19. | 8W-4067 | [1] | BRACKET-RAIL (LH) | |
| 8W-4066 | [1] | BRACKET-RAIL (RH) | ||
| 20. | 2K-0419 B | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| 21. | 6G-2947 | [1] | SHAFT | |
| 22. | 5D-6644 B | [10] | SHIM (0.762-MM THK) | |
| 23. | 0S-1595 C | [4] | BOLT (1/2-13X1.25-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17120524
8D-5910: CIRCLE GP
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5552 | [2] | BOLT-LOCKING (3/8-16X3-IN) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 2. | 6G-2943 Y | [1] | CIRCLE GP | |
| 3. | 105-2080 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 4. | 5P-8245 C | [30] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 5. | 7D-1649 C | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 6. | 8W-5229 | [1] | GUARD (RH) | |
| 7. | 6H-1717 | [30] | BOLT (1/2-13X1.125-IN) | |
| 8. | 5T-8367 | [1] | STRIP-WEAR | |
| 9. | 8W-1751 | [1] | BRACKET AS | |
| 10. | 9X-8881 | [2] | BOLT (5/8-11X2.25-IN) | |
| 9X-8883 | [2] | BOLT (5/8-11X2.75-IN) | ||
| 5P-8247 | [4] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 11. | 9D-8285 | [1] | CAP | |
| 12. | 8W-5231 C | [1] | GUARD (LH) | |
| 13. | 5T-8366 | [4] | STRIP-WEAR | |
| 14. | 8W-1749 | [10] | PLATE | |
| 15. | 2G-3221 B | [5] | SHIM (1.6-MM THK) | |
| 2G-3219 B | [5] | SHIM (0.8-MM THK) | ||
| 16. | 8D-5949 | [1] | BAR-SPREADER | |
| 17. | 2B-2673 | [2] | NUT-CASTLE (1-3/4-5-THD) | |
| 1D-0503 | [2] | WASHER (45.25X76.2X6.35-MM THK) | ||
| 3B-5320 | [2] | PIN-COTTER | ||
| 18. | 9S-8216 | [4] | NUT-FULL (1-1/2-6-THD) | |
| 19. | 8W-4067 | [1] | BRACKET-RAIL (LH) | |
| 8W-4066 | [1] | BRACKET-RAIL (RH) | ||
| 20. | 2K-0419 B | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| 21. | 6G-2947 | [1] | SHAFT | |
| 22. | 5D-6644 B | [10] | SHIM (0.762-MM THK) | |
| 23. | 7X-0334 C | [8] | BOLT (1/2-13X5-IN) | |
| 102-4139 | [8] | SPACER (18.85X26.67X78-MM THK) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17120525
8D-5910: CIRCLE GP
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5552 | [2] | BOLT-LOCKING (3/8-16X3-IN) | |
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 2. | 112-7485 CY | [1] | CIRCLE GP | |
| 3. | 105-2080 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 4. | 5P-8245 | [30] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 5. | 7X-0550 C | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 6. | 8W-5229 | [1] | GUARD (RH) | |
| 7. | 6H-1717 | [30] | BOLT (1/2-13X1.125-IN) | |
| 8. | 5T-8367 | [1] | STRIP-WEAR | |
| 9. | 8W-1751 | [1] | BRACKET AS | |
| 10. | 9X-8881 | [2] | BOLT (5/8-11X2.25-IN) | |
| 9X-8883 | [2] | BOLT (5/8-11X2.75-IN) | ||
| 5P-8247 | [4] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 11. | 9D-8285 | [1] | CAP | |
| 12. | 8W-5231 | [1] | GUARD (LH) | |
| 13. | 5T-8366 | [4] | STRIP-WEAR | |
| 14. | 8W-1749 | [10] | PLATE | |
| 15. | 2G-3221 B | [5] | SHIM (1.6-MM THK) | |
| 2G-3219 B | [5] | SHIM (0.8-MM THK) | ||
| 16. | 8D-5949 | [1] | BAR-SPREADER | |
| 17. | 2B-2673 | [2] | NUT-CASTLE (1-3/4-5-THD) | |
| 1D-0503 | [2] | WASHER (45.25X76.2X6.35-MM THK) | ||
| 3B-5320 | [2] | PIN-COTTER | ||
| 18. | 7X-0452 C | [4] | NUT-FULL (1-1/2-6-THD) | |
| 19. | 8W-4067 | [1] | BRACKET-RAIL (LH) | |
| 8W-4066 | [1] | BRACKET-RAIL (RH) | ||
| 20. | 2K-0419 B | [4] | WASHER (0.766X3.5X0.065-IN THK) | |
| 21. | 6G-2947 | [1] | SHAFT | |
| 22. | 5D-6644 B | [10] | SHIM (0.762-MM THK) | |
| 23. | 7X-0334 | [8] | BOLT (1/2-13X5-IN) | |
| 102-4139 | [8] | SPACER (18.85X26.67X78-MM THK) | ||
| 24. | 2A-7089 C | [2] | BUSHING | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17120526
6G-1932: DRAWBAR GP
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-8622 | [4] | BOLT (7/8-9X4.75-IN) | |
| 2. | 6G-1915 B | [36] | SHIM (0.25-MM THK) | |
| 3. | 110-5854 | [1] | DRAWBAR & YOKE AS | |
| 3A. | 8F-9836 C | [6] | BOSS (3/8-16-THD) | |
| 3B. | 8X-7956 C | [1] | SHAFT AS | |
| 3C. | 8X-9942 | [3] | STUD-BALL | |
| 4. | 6G-5442 | [1] | BALL | |
| 5. | 6G-1919 | [1] | CAP | |
| 6. | 4D-3907 B | [4] | SHIM (0.76-MM THK) | |
| 7. | 6D-3133 B | [6] | SHIM (0.25-MM THK) | |
| 8. | 6G-1664 | [1] | ADAPTER | |
| 9. | 5P-8291 | [5] | BOLT (3/4-16X2-IN) | |
| 10. | 2H-3764 | [2] | BOLT-SOCKET HEAD (1/4-20X1.5-IN) | |
| 11. | 9H-1031 | [4] | WASHER-HARD (24X41.5X6-MM THK) | |
| 12. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 13. | 6G-4526 | [6] | SHOE-CIRCLE GUIDE | |
| 14. | 4B-3604 | [12] | SETSCREW-SQUARE HEAD (3/4-10X2.5-IN) | |
| 15. | 1D-5119 | [12] | NUT (3/4-10-THD) | |
| 16. | 6G-1914 B | [54] | SHIM (0.76-MM THK) | |
| 17. | 6G-4524 | [11] | STRIP-WEAR | |
| 18. | 6G-4525 | [6] | STRIP-WEAR | |
| 19. | 5P-6652 | [18] | WASHER (20X44.5X6-MM THK) | |
| 20. | 3B-6753 C | [18] | BOLT (3/4-10X4.75-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17120527
8Y-3771: ADJUSTER GP-SEAT
8Y-3771 ADJUSTER GP-SEAT
S/N 61M13367-99999
PART OF 8Y-3909, 8Y-4004 SEAT GP-STATIC
ALSO AN ATTACHMENT
S/N 61M13367-99999
PART OF 8Y-3909, 8Y-4004 SEAT GP-STATIC
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-5347 | [4] | BOLT (1/2-13X0.75-IN) | |
| 2. | 9V-7943 | [2] | SPRING | |
| 3. | 8Y-3772 | [1] | SUPPORT AS | |
| 4. | 9C-2177 | [1] | CAP | |
| 5. | 6W-0590 | [1] | LEVER | |
| 6. | 3J-5696 | [1] | PIPE | |
| 7. | 4V-7890 | [1] | SPRING | |
| 8. | 6W-0111 | [2] | LINK | |
| 9. | 2L-5893 | [1] | PIN-SPRING | |
| 10. | 4V-7891 | [1] | LATCH AS | |
| 11. | 5B-6172 | [8] | WASHER (9.7X19X0.8-MM THK) | |
| 12. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 13. | 9V-3043 | [1] | LINK AS | |
| 14. | 6W-0108 | [1] | LINK AS | |
| 15. | 6W-1894 | [1] | ANGLE AS (LH) | |
| 16. | 6W-1893 | [1] | ANGLE AS (RH) | |
| 17. | 6W-1885 | [1] | CHANNEL AS | |
| 18. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) |
#SEBP17120528
108-6047: AIR CONDITIONER & MOUNTING GP
108-6047 AIR CONDITIONER & MOUNTING GP
S/N 61M12027-99999
PART OF 108-5222 AIR CONDITIONER AR
AN ATTACHMENT
S/N 61M12027-99999
PART OF 108-5222 AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-4406 Y | [1] | AIR CONDITIONER GP | |
| 2. | 8M-0456 | [1] | FUSE (20-AMPERE) | |
| 3. | 5P-5454 | [1] | ASHTRAY | |
| 4. | 5P-5824 | [1] | HOLDER | |
| 5. | 9G-3658 | [1] | CLIP | |
| 6. | 3E-0293 Y | [1] | FILTER GP-CAB AIR | |
| 7. | 1H-3337 | [6] | BOLT (1/4-20X0.875-IN) | |
| 8. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 9. | 6G-2641 | [1] | PAD | |
| 10. | 7M-3361 | [2] | GROMMET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17120529
8W-1976: AIR CONDITIONER & MOUNTING GP
8W-1976 AIR CONDITIONER & MOUNTING GP
S/N 61M12027-99999
PART OF 8W-2099 AIR CONDITIONER AR
Type 1
AN ATTACHMENT
S/N 61M12027-99999
PART OF 8W-2099 AIR CONDITIONER AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 12G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3658 | [1] | CLIP | |
| 2. | 1H-3337 | [6] | BOLT (1/4-20X0.875-IN) | |
| 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | ||
| 3. | 9G-8078 Y | [1] | FILTER GP-CAB AIR | |
| 4. | 5P-5454 | [1] | ASHTRAY | |
| 5P-5824 | [1] | HOLDER | ||
| 5. | 7T-9726 Y | [1] | AIR CONDITIONER GP | |
| 6. | 8M-0456 | [1] | FUSE (20-AMPERE) | |
| 7. | 7M-3361 | [2] | GROMMET | |
| 8. | 6G-2641 | [1] | PAD | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 12G :
Truck sale:
86.058
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
