AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8D-4040 BLADE GP S/N 61M12027-99999 12 FT PART OF 8W-2426 BLADE AR 12G MOTOR GRADER


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP

MOTOR GRADER 12G MOTOR GRADER 61M
 12G Motor Grader 61M12027-UP (MACHINE) POWERED BY 3306 Engine SEBP1712 12G 61M   (1973)

WORK TOOLS

BLADE GP
8W-2426 BLADE AR
BLADE GP
8D-4040 BLADE GP
BLADE GP
8W-6734 BLADE GP
EXTENSION GP-BLADE
8W-3330 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
 

#SEBP17120650
 

8D-4040: BLADE GP

8D-4040 BLADE GP
S/N 61M12027-99999
12 FT
PART OF 8W-2426 BLADE AR
i00145523 SEBP1712
8D4040 BLADE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2768 C [1] MOLDBOARD AS  
2. 7B-5030 [2] RAIL-MOLDBOARD  
3. 4K-0367 [36] NUT-FULL (5/8-11-THD)  
4. 8E-5531 C [2] BIT-END (MOLDBOARD)  
5. 9W-1767 C [2] BIT-END (OVERLAY)  
6. 5D-9553 [2] EDGE-CUTTING  
7. 3F-5108 [26] BOLT-PLOW (5/8-11X2.25-IN)  
8. 4F-3657 [10] BOLT-PLOW (5/8-11X2.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17120651
 

8W-6734: BLADE GP

8W-6734 BLADE GP
S/N 61M12027-99999
14 FOOT
AN ATTACHMENT
i00145746 SEBP1712
8W6734 BLADE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2761 [1] MOLDBOARD AS  
2. 3F-5108 [30] BOLT-PLOW (5/8-11X2.25-IN)(57.15MM LONG)  
3. 4K-0367 [40] NUT-FULL (5/8-11-THD)  
4. 8E-5531 [2] BIT-END (MOLDBOARD)  
5. 9W-1767 [2] BIT-END (OVERLAY)  
6. 4F-3657 [10] BOLT-PLOW (5/8-11X2.75-IN)(69.85MM LONG)  
7. 5D-9554 [2] EDGE-CUTTING  
 

#SEBP17120652
 

6D-1827: EDGE GP-BIT & CUTTING

6D-1827 EDGE GP-BIT & CUTTING
S/N 61M12027-99999
18.70 MM THICK X 203.00 MM WIDE
REPLACED BY @@@@@ 9N-4588@@@@@
AN ATTACHMENT
i00145259 SEBP1712
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9W-1768 [2] BIT-END (OVERLAY)  
  4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
  5D-9559 [2] EDGE-CUTTING  
 

#SEBP17120653
 

6D-1837: EDGE GP-BIT & CUTTING

6D-1837 EDGE GP-BIT & CUTTING
S/N 61M12027-99999
18.70 MM (.74 IN) THICK X 203.00 MM (7.99 IN) WIDE
FOR USE WITH 12 FT BLADE
AN ATTACHMENT
i00145261 SEBP1712
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9W-1768 [2] BIT-END (OVERLAY)  
  4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
  5D-9558 [2] EDGE-CUTTING  
 

#SEBP17120654
 

9N-4588: EDGE GP-BIT & CUTTING

9N-4588 EDGE GP-BIT & CUTTING
S/N 61M12027-99999
19 MM THICK X 203 MM WIDE
FOR USE WITH 8W-6734 BLADE GP
AN ATTACHMENT
i00145823 SEBP1712
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9W-1768 [2] BIT-END (OVERLAY)  
  4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
  5D-9559 [2] EDGE-CUTTING  
 

#SEBP17120655
 

6D-1828: EDGE GP-CUTTING

6D-1828 EDGE GP-CUTTING
S/N 61M12027-99999
18.7 MM THICK X 203 MM WIDE
AN ATTACHMENT
i00145260 SEBP1712
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3F-5108 BOLT-PLOW (5/8-11X2.25-IN)  
  5D-9561 EDGE-CUTTING  
  4K-0367 NUT-FULL (5/8-11-THD)  
 

#SEBP17120656
 

7T-3493: EDGE-CUTTING

7T-3493 EDGE-CUTTING
S/N 61M12027-99999
AN ATTACHMENT AND FIELD INSTALLATION
i00815425 SEBP1712
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICEABLE PARTS
 

#SEBP17120657
 

8W-3330: EXTENSION GP-BLADE

8W-3330 EXTENSION GP-BLADE -RH
S/N 61M12027-99999
2-FT
AN ATTACHMENT
i00122503 SEBP1712
8W3330 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5641 [1] PLATE AS  
4. 4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2214 [1] EXTENSION  
6. 9W-1835 [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7563 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP17120658
 

8W-3332: EXTENSION GP-BLADE

8W-3332 EXTENSION GP-BLADE -LH
S/N 61M12027-99999
2-FT
AN ATTACHMENT
i00122504 SEBP1712
8W3332 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5640 [1] PLATE AS  
4. 4F-3658 C [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2213 [1] EXTENSION (LH)  
6. 9W-1835 C [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7564 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5643 B [2] SPACER (1-MM THK)  
12. 176-5642 B [1] SPACER (2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17120659
 

8D-5285: LIFT GP-BLADE

8D-5285 LIFT GP-BLADE
S/N 61M12027-12143; 61M12146-12147
PART OF 8W-2426 BLADE AR
i00145530 SEBP1712
8D5285 LIFT GP-BLADE Parts scheme 8D5285 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2753 C [2] LOCK  
2. 7F-5227 [4] BOLT (3/4-10X3.75-IN)  
  5P-8248 C [4] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 5T-3756 [1] ARM AS  
4. 8D-8168 [1] BEARING (63.65-MM ID)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 9D-6583 C [8] SEAL-LIP TYPE  
7. 8D-1784 [2] PIN  
8. 9D-6584 [1] SEAL-LIP TYPE  
9. 8D-9849 [1] BAR AS  
10. 8D-6629 [4] BEARING  
11. 6D-4671 [1] STUD-BALL  
12. 9D-3311 [2] BUSHING  
  9D-3526 [1] SPACER  
13. 9D-3648 [1] RING-RETAINING  
14. 5T-3754 C [2] LOCK  
15. 1D-4588 [4] BOLT (5/8-11X4.25-IN)  
  5P-8247 C [4] WASHER-HARD (17X32X3.5-MM THK)  
16. 5T-3755 [1] ARM AS  
17. 8D-8168 [1] BEARING (63.65-MM ID)  
18. 7D-8889 [1] BEARING (76.35-MM ID)  
19. 7D-8891 [2] RETAINER  
20. 7D-8884 [2] SEAL (PLASTIC)  
  7H-2444 [2] SEAL-O-RING (RUBBER)  
21. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)(2.388MM THK)  
  7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)(1.905MM THK)  
22. 7D-8879 [8] SHIM (0.127-MM THK)  
  7D-8881 [6] SHIM (0.254-MM THK)  
  7D-8882 [2] SHIM (0.508-MM THK)  
23. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)(2.388MM THK)  
  7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)(1.905MM THK)  
24. 7D-8883 [2] SEAL (PLASTIC)  
  5F-0149 [2] SEAL-O-RING (RUBBER)  
25. 2G-8238 [2] YOKE AS  
    (EACH INCLUDES)
26. 2G-8233 [1] RING  
27. 7D-8874 [8] WASHER-THRUST (1.905MM THK)  
  7D-8873 [4] WASHER-THRUST (2.388MM THK)  
28. 8D-5214 [4] WASHER-THRUST (2.388MM)  
  8D-5217 [10] WASHER-THRUST (1.219MM THK)  
  8D-5216 [10] WASHER-THRUST (.762MM THK)  
29. 8D-4689 [2] PIN  
30. 2G-3984 C [1] PLATE  
31. 9S-1366 C [1] BOLT (1/2-13X2.5-IN)  
  2M-0849 C [1] WASHER-HARD (13.5X25.5X5-MM THK)  
32. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
  5P-8245 C [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog 12G :

8W-2426 BLADE AR
9W-2945 BIT-END
7D-6671 BIT GP-END
6Y-4340 BIT GP
6Y-4339 BIT GP
105-5183 BIT GP
105-5180 BIT GP
WIPER GP-WINDOW
8W-2677 WIPER GP-WINDOW
BLADE GP
8W-6734 BLADE GP
6D-1827 EDGE GP-BIT & CUTTING
6D-1837 EDGE GP-BIT & CUTTING
9N-4588 EDGE GP-BIT & CUTTING
6D-1828 EDGE GP-CUTTING
7T-3493 EDGE-CUTTING
EXTENSION GP-BLADE
8W-3330 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.