IMPLEMENTS
CIRCLE GPDRAWBAR GP
BULLDOZER GP
OPERATOR STATION
AIR CONDITIONER GPIMPLEMENTS
CIRCLE GP
#SEBP17130490
6G-4970: CIRCLE GP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6G-4977 | [1] | CIRCLE & BEAM AS | |
| 2. | 6G-4907 | [1] | BEAM-BLADE | |
| 3. | 6G-7002 | [1] | BRACKET | |
| 4. | 6G-4906 | [1] | BEAM-BLADE | |
| 5. | 6G-4909 | [2] | BOSS | |
| 6. | 5T-2354 | [1] | BRACKET AS | |
| 7. | 6G-4831 | [2] | SHAFT | |
| 8. | 6J-5773 | [4] | WASHER (50.95X94X12-MM THK) | |
| 9. | 5F-3715 | [4] | NUT-SLOTTED HEX (2-12-THD) | |
| 10. | 3B-5329 | [4] | PIN-COTTER | |
| 11. | 8W-4167 C | [8] | BUSHING | |
| 12. | 5V-0354 CB | [2] | WASHER (66X133X3-MM THK) | |
| 13. | 2G-2945 B | [4] | SHIM (0.76-MM THK)(.77MM THK) | |
| 14. | 2G-2946 B | [4] | SHIM (1.52-MM THK) | |
| 15. | 2G-9566 | [8] | BLOCK | |
| 16. | 5T-8365 | [4] | STRIP-WEAR | |
| 17. | 1B-3573 | [4] | BOLT (1/2-13X8.5-IN) | |
| 18. | 9S-1374 | [8] | BOLT (1/2-13X8-IN) | |
| 19. | 1K-6872 | [12] | LOCKNUT (1/2-13-THD) | |
| 2M-0849 | [24] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 20. | 7P-7705 | [4] | WASHER (54X88X3-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17130491
6G-4970: CIRCLE GP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 259-4489 C | [1] | CIRCLE AS | |
| 2. | 8X-5313 | [1] | BEAM-BLADE | |
| 3. | 250-0634 | [1] | BRACKET AS | |
| 4. | 8X-5312 | [1] | BEAM-BLADE | |
| 5. | 6G-4911 | [2] | BOSS | |
| 6. | 8X-5428 | [2] | BLOCK | |
| 7. | 6G-4831 | [2] | SHAFT | |
| 8. | 6J-5773 | [4] | WASHER (50.95X94X12-MM THK) | |
| 9. | 5F-3715 | [4] | NUT-SLOTTED HEX (2-12-THD) | |
| 10. | 3B-5320 | [4] | PIN-COTTER | |
| 11. | 8W-4167 | [8] | BUSHING | |
| 12. | 5V-0354 B | [2] | WASHER (66X133X3-MM THK) | |
| 13. | 2G-2945 B | [4] | SHIM (0.76-MM THK) | |
| 14. | 2G-2946 B | [4] | SHIM (1.52-MM THK) | |
| 15. | 104-7238 | [8] | PLATE | |
| 16. | 5T-8365 | [4] | STRIP-WEAR | |
| 17. | 5T-2354 | [1] | BRACKET AS | |
| 18. | 9S-1374 | [12] | BOLT (1/2-13X8-IN) | |
| 19. | 1K-6872 | [12] | LOCKNUT (1/2-13-THD) | |
| 2M-0849 | [24] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 20. | 7P-7705 | [4] | WASHER (54X88X3-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17130492
6G-4985: DRAWBAR GP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6G-4915 | [1] | DRAWBAR & YOKE AS | |
| 2. | 2G-9042 | [1] | SHAFT AS | |
| 3. | 6J-0499 | [4] | LUG (1/2-13-THD) | |
| 4. | 5D-2643 | [6] | LUG | |
| 5. | 8F-9836 | [1] | BOSS (3/8-16-THD) | |
| 6. | 6G-3532 | [3] | BALLSTUD AS | |
| (EACH INCLUDES) | ||||
| 6G-3529 | [1] | STUD-BALL | ||
| 7. | 8D-4813 B | [3] | SHIM (0.25-MM THK)(0.25MM THK) | |
| 8. | 9S-8892 | [6] | BOLT-12 POINT HEAD (3/4-16X3.5-IN) | |
| 9. | 1L-8793 | [2] | BOLT-SOCKET HEAD (3/8-16X2-IN) | |
| 10. | 6G-4680 | [1] | ADAPTER | |
| 11. | 1D-4614 | [8] | BOLT (3/4-10X5-IN) | |
| 12. | 5P-8248 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 13. | 6G-4173 | [6] | SHOE-CIRCLE GUIDE | |
| 14. | 4D-8318 | [12] | SETSCREW-SQUARE HEAD (1-8X3-IN) | |
| 15. | 1D-6306 | [12] | NUT (1-8-THD) | |
| 16. | 6G-4642 B | [60] | SHIM (0.8-MM THK) | |
| 17. | 6G-4643 B | [48] | SHIM (0.25-MM THK) | |
| 18. | 6G-4372 | [6] | STRIP-WEAR | |
| 19. | 6G-4524 | [10] | STRIP-WEAR | |
| 20. | 9S-1322 | [12] | BOLT (7/8-9X6-IN) | |
| 21. | 5P-8249 | [14] | WASHER-HARD (24X41.5X4-MM THK) | |
| 22. | 6K-0545 | [14] | LOCKNUT (7/8-9-THD) | |
| 23. | 5D-4281 | [18] | WASHER (23X51X0.13-MM THK) | |
| 24. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 25. | 1D-4634 | [4] | BOLT (7/8-9X5.5-IN) | |
| 26. | 1D-5976 | [2] | BOLT (7/8-9X7-IN) | |
| 27. | 6G-4896 | [1] | BALL | |
| 28. | 6G-4681 | [1] | CAP | |
| 29. | 8D-4811 B | [2] | SHIM (1.52-MM THK)(1.52MM THK) | |
| 30. | 8D-4812 B | [3] | SHIM (0.76-MM THK)(0.76MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP17130493
6G-4985: DRAWBAR GP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-5317 C | [1] | DRAWBAR & YOKE AS | |
| 2. | 2G-9042 | [1] | SHAFT AS | |
| 3. | 6J-9944 | [1] | LUG (1/2-13-THD) | |
| 4. | 5D-2643 | [5] | LUG (3/8-16 THD) | |
| 5. | 2S-4615 | [2] | BOSS | |
| 6. | 8X-9943 | [3] | STUD-BALL | |
| 7. | 8D-4813 B | [3] | SHIM (0.25-MM THK) | |
| 8. | 9S-8892 | [6] | BOLT-12 POINT HEAD (3/4-16X3.5-IN) | |
| 9. | 1L-8793 | [2] | BOLT-SOCKET HEAD (3/8-16X2-IN) | |
| 10. | 6G-4680 | [1] | ADAPTER | |
| 11. | 0S-1627 C | [8] | BOLT (3/4-10X4.5-IN) | |
| 12. | 5P-8248 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 13. | 6G-4173 | [6] | SHOE-CIRCLE GUIDE | |
| 14. | 4D-8318 | [12] | SETSCREW-SQUARE HEAD (1-8X3-IN) | |
| 15. | 1D-6306 | [12] | NUT (1-8-THD) | |
| 16. | 6G-4642 B | [90] | SHIM (0.8-MM THK) | |
| 17. | 6G-4643 B | [24] | SHIM (0.25-MM THK) | |
| 18. | 128-9655 | [6] | STRIP-WEAR | |
| 19. | 128-9654 | [10] | STRIP-WEAR | |
| 20. | 6J-1536 C | [12] | BOLT (7/8-9X6.5-IN) | |
| 21. | 5P-8249 | [13] | WASHER-HARD (24X41.5X4-MM THK) | |
| 22. | 2J-3505 C | [13] | NUT-FULL (7/8-9-THD) | |
| 23. | 5D-4281 | [18] | WASHER (23X51X0.13-MM THK) | |
| 24. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 25. | 1D-4634 | [5] | BOLT (7/8-9X5.5-IN) | |
| 26. | 1D-5976 | [1] | BOLT (7/8-9X7-IN) | |
| 27. | 6G-4896 | [1] | BALL | |
| 28. | 6G-4681 | [1] | CAP | |
| 29. | 8D-4811 B | [2] | SHIM (1.52-MM THK) | |
| 30. | 8D-4812 B | [3] | SHIM (0.76-MM THK) | |
| 31. | 153-7410 B | [1] | SHIM (0.12-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17130494
110-5744: PUSH ARM GP
110-5744 PUSH ARM GP -RH
S/N R6J1-UP
S/N R6J1-UP
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-9401 B | [26] | SHIM (0.8-MM THK) | |
| 2. | 109-5676 | [1] | PUSH ARM AS (RH) | |
| 2A. | 7T-5140 | [1] | STEP | |
| 2B. | 3G-7000 | [1] | BRACKET AS | |
| 2C. | 8J-5326 | [1] | PLATE | |
| 2D. | 8P-9770 | [1] | PLATE | |
| 2E. | 109-5674 | [1] | BRACKET AS (RH) | |
| 2F. | 3G-9598 | [2] | BUSHING | |
| 2G. | 116-8046 | [1] | BEARING AS | |
| 116-8039 | [1] | BEARING | ||
| 3. | 116-8038 | [1] | CAP-BEARING | |
| 4. | 126-8928 | [8] | WASHER-HARD (26X40X8-MM THK) | |
| 5. | 7X-2455 M | [4] | BOLT (M24X3X260-MM) | |
| 6. | 8T-4001 M | [4] | NUT (M24X3-THD) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP17130495
108-6047: AIR CONDITIONER & MOUNTING GP
108-6047 AIR CONDITIONER & MOUNTING GP
S/N 96U7046-UP
PART OF 108-5221 AIR CONDITIONER AR
AN ATTACHMENT
S/N 96U7046-UP
PART OF 108-5221 AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-4406 Y | [1] | AIR CONDITIONER GP | |
| 2. | 8M-0456 | [1] | FUSE (20-AMPERE) | |
| 3. | 5P-5454 | [1] | ASHTRAY | |
| 4. | 5P-5824 | [1] | HOLDER | |
| 5. | 9G-3658 | [1] | CLIP | |
| 6. | 3E-0293 Y | [1] | FILTER GP-CAB AIR | |
| 7. | 1H-3337 | [6] | BOLT (1/4-20X0.875-IN) | |
| 8. | 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | |
| 9. | 6G-2641 | [1] | PAD | |
| 10. | 7M-3361 | [2] | GROMMET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17130496
8W-1976: AIR CONDITIONER & MOUNTING GP
8W-1976 AIR CONDITIONER & MOUNTING GP
S/N 96U7046-UP
PART OF 8W-2102 AIR CONDITIONER AR
Type 1
AN ATTACHMENT
S/N 96U7046-UP
PART OF 8W-2102 AIR CONDITIONER AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3658 | [1] | CLIP | |
| 2. | 1H-3337 | [6] | BOLT (1/4-20X0.875-IN) | |
| 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | ||
| 3. | 9G-8078 Y | [1] | FILTER GP-CAB AIR | |
| 4. | 5P-5454 | [1] | ASHTRAY | |
| 5P-5824 | [1] | HOLDER | ||
| 5. | 7T-9726 Y | [1] | AIR CONDITIONER GP | |
| 6. | 8M-0456 | [1] | FUSE (20-AMPERE) | |
| 7. | 7M-3361 | [2] | GROMMET | |
| 8. | 6G-2641 | [1] | PAD | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17130497
8W-1976: AIR CONDITIONER & MOUNTING GP
8W-1976 AIR CONDITIONER & MOUNTING GP
S/N 96U7046-UP
PART OF 8W-2102 AIR CONDITIONER AR
Type 2
AN ATTACHMENT
S/N 96U7046-UP
PART OF 8W-2102 AIR CONDITIONER AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3658 | [1] | CLIP | |
| 2. | 1H-3337 | [6] | BOLT (1/4-20X0.875-IN) | |
| 5P-4115 | [6] | WASHER-HARD (7.2X19X2-MM THK) | ||
| 3. | 3E-0293 CY | [1] | FILTER GP-CAB AIR | |
| 4. | 5P-5454 | [1] | ASHTRAY | |
| 5P-5824 | [1] | HOLDER | ||
| 5. | 7T-9726 Y | [1] | AIR CONDITIONER GP | |
| 6. | 8M-0456 | [1] | FUSE (20-AMPERE) | |
| 7. | 7M-3361 | [2] | GROMMET | |
| 8. | 6G-2641 | [1] | PAD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17130498
108-5221: AIR CONDITIONER AR
For full view, you need register
Parts for your 14G MOTOR GRADER:
#SEBP17130499
8W-2102: AIR CONDITIONER AR
For full view, you need register
Parts for your 14G MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8W-1976 Y | [1] | AIR CONDITIONER & MOUNTING GP | ||
| 3P-0066 Y | [1] | COMPRESSOR AR-REFRIGERANT | ||
| 9D-1650 Y | [1] | CONDENSER & MTG GP-REFRIGERANT | ||
| 8W-1989 Y | [1] | DUCT & CONTROL GP | ||
| 103-2537 | [1] | FILM-WARNING (AIR CONDITIONER) | ||
| 8W-2452 | [1] | FLOOR MAT | ||
| 8W-6830 Y | [1] | LINES GP-AIR CONDITIONER | ||
| Y | SEPARATE ILLUSTRATION | |||
