AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D-6780 EDGE GP-BIT & CUTTING S/N 74V2321-99999 12 FOOT. CURVED AN ATTACHMENT 130G MOTOR GRADER


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP
IMPLEMENTS
LINK GP
WORK TOOLS
RIPPER GP

MOTOR GRADER 130G MOTOR GRADER 74V
 130G Motor Grader 74V02321-UP (MACHINE) POWERED BY 3304 Engine SEBP1714 130G 74V   (1975)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
105-5180 BIT GP
105-5183 BIT GP
6Y-4339 BIT GP
6Y-4340 BIT GP
7D-6671 BIT GP-END
9W-2945 BIT-END
EDGE GP-BIT & CUTTING
9D-6780 EDGE GP-BIT & CUTTING
7T-3493 EDGE-CUTTING
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
 

#SEBP17140630
 

9D-6780: EDGE GP-BIT & CUTTING

9D-6780 EDGE GP-BIT & CUTTING
S/N 74V2321-99999
12 FOOT. CURVED
AN ATTACHMENT
i00146298 SEBP1714
9D6780 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1768 C [2] BIT-END (OVERLAY)  
2. 4F-3657 [6] BOLT-PLOW (5/8-11X2.75-IN)  
3. 5D-9558 [2] EDGE-CUTTING  
4. 4F-3658 C [4] BOLT-PLOW (5/8-11X3-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17140631
 

7T-3493: EDGE-CUTTING

7T-3493 EDGE-CUTTING
S/N 74V2321-99999
AN ATTACHMENT AND FIELD INSTALLATION
i00815425 SEBP1714
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICEABLE PARTS
 

#SEBP17140632
 

8W-3330: EXTENSION GP-BLADE

8W-3330 EXTENSION GP-BLADE -RH
S/N 74V2321-99999
2-FT
AN ATTACHMENT
i00122503 SEBP1714
8W3330 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5641 [1] PLATE AS  
4. 4F-3658 [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2214 [1] EXTENSION  
6. 9W-1835 [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7563 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP17140633
 

8W-3332: EXTENSION GP-BLADE

8W-3332 EXTENSION GP-BLADE -LH
S/N 74V2321-99999
2-FT
AN ATTACHMENT
i00122504 SEBP1714
8W3332 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-5108 [6] BOLT-PLOW (5/8-11X2.25-IN)  
2. 4K-0367 [16] NUT-FULL (5/8-11-THD)  
3. 176-5640 [1] PLATE AS  
4. 4F-3658 C [10] BOLT-PLOW (5/8-11X3-IN)  
5. 8W-2213 [1] EXTENSION (LH)  
6. 9W-1835 C [1] EDGE-CUTTING  
7. 9B-1565 [2] SPACER (3-MM THK)  
8. 6D-7564 [1] ANGLE AS  
9. 9X-8880 [2] BOLT (5/8-11X2-IN)  
10. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
11. 176-5643 B [2] SPACER (1-MM THK)  
12. 176-5642 B [1] SPACER (2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17140634
 

8D-5285: LIFT GP-BLADE

8D-5285 LIFT GP-BLADE
S/N 74V2321-2355
PART OF 8W-2435 BLADE AR
i00145530 SEBP1714
8D5285 LIFT GP-BLADE Parts scheme 8D5285 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2753 C [2] LOCK  
2. 7F-5227 [4] BOLT (3/4-10X3.75-IN)  
  5P-8248 C [4] WASHER-HARD (20X36.5X3.5-MM THK)  
3. 5T-3756 [1] ARM AS  
4. 8D-8168 [1] BEARING (63.65-MM ID)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 9D-6583 C [8] SEAL-LIP TYPE  
7. 8D-1784 [2] PIN  
8. 9D-6584 [1] SEAL-LIP TYPE  
9. 8D-9849 [1] BAR AS  
10. 8D-6629 [4] BEARING  
11. 6D-4671 [1] STUD-BALL  
12. 9D-3311 [2] BUSHING  
  9D-3526 [1] SPACER  
13. 9D-3648 [1] RING-RETAINING  
14. 5T-3754 C [2] LOCK  
15. 1D-4588 [4] BOLT (5/8-11X4.25-IN)  
  5P-8247 C [4] WASHER-HARD (17X32X3.5-MM THK)  
16. 5T-3755 [1] ARM AS  
17. 8D-8168 [1] BEARING (63.65-MM ID)  
18. 7D-8889 [1] BEARING (76.35-MM ID)  
19. 7D-8891 [2] RETAINER  
20. 7D-8884 [2] SEAL (PLASTIC)  
  7H-2444 [2] SEAL-O-RING (RUBBER)  
21. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)(2.388MM THK)  
  7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)(1.905MM THK)  
22. 7D-8879 [8] SHIM (0.127-MM THK)  
  7D-8881 [6] SHIM (0.254-MM THK)  
  7D-8882 [2] SHIM (0.508-MM THK)  
23. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)(2.388MM THK)  
  7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)(1.905MM THK)  
24. 7D-8883 [2] SEAL (PLASTIC)  
  5F-0149 [2] SEAL-O-RING (RUBBER)  
25. 2G-8238 [2] YOKE AS  
    (EACH INCLUDES)
26. 2G-8233 [1] RING  
27. 7D-8874 [8] WASHER-THRUST (1.905MM THK)  
  7D-8873 [4] WASHER-THRUST (2.388MM THK)  
28. 8D-5214 [4] WASHER-THRUST (2.388MM)  
  8D-5217 [10] WASHER-THRUST (1.219MM THK)  
  8D-5216 [10] WASHER-THRUST (.762MM THK)  
29. 8D-4689 [2] PIN  
30. 2G-3984 C [1] PLATE  
31. 9S-1366 C [1] BOLT (1/2-13X2.5-IN)  
  2M-0849 C [1] WASHER-HARD (13.5X25.5X5-MM THK)  
32. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
  5P-8245 C [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17140635
 

8D-5285: LIFT GP-BLADE

8D-5285 LIFT GP-BLADE
S/N 74V2356-99999
PART OF 8W-2435 BLADE AR
i00145531 SEBP1714
8D5285 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2753 [2] LOCK  
2. 3B-6753 C [4] BOLT (3/4-10X4.75-IN)  
  5P-8248 C [8] WASHER-HARD (20X36.5X3.5-MM THK)  
  2J-3506 C [4] NUT-FULL (3/4-10-THD)  
3. 8W-5952 C [1] ARM AS  
4. 8D-8168 [1] BEARING (63.65-MM ID)  
5. 7D-8889 [1] BEARING (76.35-MM ID)  
6. 7K-9203 C [8] SEAL-LIP TYPE  
7. 8D-1784 [2] PIN  
8. 9D-6584 [1] SEAL-LIP TYPE  
9. 8D-9849 [1] BAR AS  
10. 8D-6629 [4] BEARING  
11. 6D-4671 [1] STUD-BALL  
12. 9D-3311 [2] BUSHING  
  9D-3526 [1] SPACER  
13. 9D-3648 [1] RING-RETAINING  
14. 5T-3754 [2] LOCK  
15. 1A-5405 C [4] BOLT (5/8-11X5-IN)  
  5P-8247 C [8] WASHER-HARD (17X32X3.5-MM THK)  
  4K-0367 C [4] NUT-FULL (5/8-11-THD)(FULL)  
16. 8W-5953 C [1] ARM AS  
17. 8D-8168 [1] BEARING (63.65-MM ID)  
18. 7D-8889 [1] BEARING (76.35-MM ID)  
19. 7D-8891 [2] RETAINER  
20. 7D-8884 [2] SEAL (PLASTIC)  
  7H-2444 [2] SEAL-O-RING (RUBBER)  
21. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)(2.388MM THK)  
  7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)(1.905MM THK)  
22. 7D-8879 B [8] SHIM (0.127-MM THK)  
  7D-8881 B [6] SHIM (0.254-MM THK)  
  7D-8882 B [2] SHIM (0.508-MM THK)  
23. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)(2.388MM THK)  
  7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)(1.905MM THK)  
24. 7D-8883 [2] SEAL (PLASTIC)  
  5F-0149 [2] SEAL-O-RING (RUBBER)  
25. 2G-8238 [2] YOKE AS  
    (EACH INCLUDES)
26. 2G-8233 [1] RING  
27. 7D-8874 [8] WASHER-THRUST (1.905MM THK)  
  7D-8873 [4] WASHER-THRUST (2.388MM THK)  
28. 8D-5214 [4] WASHER-THRUST (2.388MM THK)  
  8D-5217 [10] WASHER-THRUST (1.219MM THK)  
  8D-5216 [10] WASHER-THRUST (.762MM THK)  
29. 8D-4689 [2] PIN  
30. 2G-3984 [1] PLATE  
31. 9S-1366 [1] BOLT (1/2-13X2.5-IN)  
  2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
32. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17140636
 

6Y-8494: LINK GP-RIPPER

6Y-8494 LINK GP-RIPPER
S/N 74V2321-2604
PART OF 8J-6995 MOUNTING GP-RIPPER
AN ATTACHMENT
i00145446 SEBP1714
6Y8494 LINK GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-7534 [1] LINK AS  
2. 9J-5376 [1] EYEBOLT  
 

#SEBP17140637
 

8J-6995: MOUNTING GP-RIPPER

8J-6995 MOUNTING GP-RIPPER
S/N 74V2321-2604
PART OF 8J-7586 RIPPER AR
Type 1
AN ATTACHMENT
i00145577 SEBP1714
8J6995 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-6903 C [4] SPACER  
2. 8S-9191 C [2] BOLT (3/8-16X4-IN)  
3. 8S-9093 [10] BOLT (1-8X2.25-IN)  
  5P-8250 [10] WASHER (28X49X5-MM THK)  
4. 8J-6990 [1] PLATE AS  
5. 2H-6488 [2] BOLT (1/2-13X5-IN)  
  1K-6872 [2] LOCKNUT (1/2-13-THD)  
6. 4K-3150 [2] PIN  
7. 9H-2374 [2] BOLT  
8. 7T-7534 [2] LINK AS  
    (EACH INCLUDES)
9. 9J-0084 [1] NUT  
10. 9J-5376 [2] EYEBOLT  
11. 9J-0090 [2] PIN  
12. 2K-4973 C [4] LOCKNUT (3/8-16-THD)  
13. 8J-7008 C [2] PIN  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17140638
 

8J-6995: MOUNTING GP-RIPPER

8J-6995 MOUNTING GP-RIPPER
S/N 74V2321-2604
PART OF 8J-7586 RIPPER AR
Type 2
AN ATTACHMENT
i00145578 SEBP1714
8J6995 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-0404 B [8] WASHER (1.781X3.25X0.25-IN THK)  
2. 8T-9378 [2] BOLT (3/8-16X4-IN)  
3. 7X-0403 [10] BOLT (1-8X2.25-IN)  
  8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
4. 8J-6990 [1] PLATE AS  
5. 7X-0334 [2] BOLT (1/2-13X5-IN)  
  1K-6872 [2] LOCKNUT (1/2-13-THD)  
6. 4K-3150 [2] PIN  
7. 7X-0293 [2] BOLT (3/8-16X4.75-IN)  
8. 6Y-8494 CY [2] LINK GP-RIPPER  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 8J-7008 [2] PIN  
11. 9J-0090 [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17140639
 

8J-6995: MOUNTING GP-RIPPER

8J-6995 MOUNTING GP-RIPPER
S/N 74V2605-99999
PART OF 8J-7586 RIPPER AR
AN ATTACHMENT
i00145579 SEBP1714
8J6995 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-0404 B [8] WASHER (1.781X3.25X0.25-IN THK)  
2. 8T-9378 [2] BOLT (3/8-16X4-IN)  
3. 7X-0403 [10] BOLT (1-8X2.25-IN)  
  8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
4. 8J-6990 [1] PLATE AS  
5. 7X-0334 [2] BOLT (1/2-13X5-IN)  
  1K-6872 [2] LOCKNUT (1/2-13-THD)  
6. 4K-3150 [2] PIN  
7. 7X-0293 [2] BOLT (3/8-16X4.75-IN)  
8. 104-4519 C [2] LINK AS  
  2K-4233 C [1] BOSS  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 8J-7008 [2] PIN  
11. 9J-0090 [2] PIN  
12. 104-4523 C [2] CAM AS  
13. 6P-5647 C [2] BOSS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog 130G :

BLADE GP
9D-0740 BLADE GP
BLADE GP
8X-0404 BLADE GP
BLADE GP
8W-3840 BLADE GP
BLADE GP
2G-6059 BLADE GP
8W-7920 BLADE AR-POWER
8W-2511 BLADE AR-POWER
8W-2435 BLADE AR
8W-2513 BLADE & TIP AR-POWER
7T-3493 EDGE-CUTTING
EXTENSION GP-BLADE
8W-3330 EXTENSION GP-BLADE
EXTENSION GP-BLADE
8W-3332 EXTENSION GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
LINK GP-RIPPER
6Y-8494 LINK GP-RIPPER
MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.