AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8W-3590 WIRING GP-SENSOR S/N 93U2679-UP SUPPLEMENTAL STEERING PART OF 8W-3800 STEERING AR-SECONDARY AN ATTACHMENT 16G


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
POWER TRAIN
TRANSMISSION GP
CHAIN GP
CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD
COOLER GP
TRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP

MOTOR GRADER 16G MOTOR GRADER 93U
 16G Motor Grader 93U02679-UP (MACHINE) POWERED BY 3406 Engine SEBP1715 16G 93U   (1973)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
WIRING GP-SENSOR
8W-3590 WIRING GP-SENSOR
 

#SEBP17150320
 

8W-3590: WIRING GP-SENSOR

8W-3590 WIRING GP-SENSOR
S/N 93U2679-UP
SUPPLEMENTAL STEERING
PART OF 8W-3800 STEERING AR-SECONDARY
AN ATTACHMENT
i00147458 SEBP1715
8W3590 WIRING GP-SENSOR Parts scheme 8W3590 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-4056 [1] ACTUATOR  
2. 7N-1514 [1] SCREW-ADJUSTMENT  
  5B-3180 [1] NUT (5/16-18-THD)  
3. 5T-4058 [1] COVER  
4. 5T-4057 [1] GASKET  
5. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 8T-9101 [4] BOLT (3/8-16X2.75-IN)  
7. 3T-3132 [1] SWITCH AS-LIMIT  
  2H-3922 [1] LOCKWASHER  
  6V-8363 [2] SCREW (10-32X0.312-IN)  
  6V-8370 [1] NUT-HEX (3/4-32-THD)  
  7T-6184 [1] BOOT-SWITCH  
  8F-1434 [2] LOCKWASHER  
8. 3K-0360 [1] SEAL-O-RING  
9. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
10. 5T-4055 [1] HOUSING  
11. 9D-6153 [1] CABLE AS  
  5P-0760 E CABLE (00-GA, RED)  
  1M-4986 [1] TERMINAL-RING (0-GA, 1/2-IN SCREW)  
  030-1707 [1] TERMINAL-RING (0-GA, 3/8-IN SCREW)  
12. 2D-8406 [1] CABLE AS  
  030-1707 [1] TERMINAL-RING (0-GA, 3/8-IN SCREW)  
  1M-4986 [1] TERMINAL-RING (0-GA, 1/2-IN SCREW)  
13. 3S-2093 [1] STRAP-CABLE  
14. 5T-9483 [1] PLATE  
  8D-9974 [2] GASKET  
15. 8M-2770 [4] CLIP (LOOP)  
16. 9M-4995 [2] CLIP  
17. 5S-7379 [5] BOLT (3/8-16X0.875-IN)  
18. 4M-3136 [1] CABLE AS  
19. 5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 1D-4717 [3] NUT (3/8-16-THD)  
21. 3T-0050 [1] CLIP  
22. 9G-9150 [1] CLIP  
23. 2L-0273 [3] FITTING (RUBBER)  
24. 7N-3621 Y [1] SWITCH GP-MAGNETIC  
25. 9X-6932 [1] BOOT-TERMINAL  
26. 1H-3337 [4] BOLT (1/4-20X0.875-IN)  
27. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 6V-8185 [4] NUT (1/4-20-THD)  
29. 3E-5184 Y [1] CONTROL GP-SECONDARY STEERING  
30. 3K-8782 [1] FUSE (10-AMPERE)  
31. 3S-2093 [5] STRAP-CABLE  
32. 3T-3048 [1] CLIP AS  
33. 8M-2770 [1] CLIP (LOOP)  
34. 8W-3591 [1] HARNESS AS  
35. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
36. 6V-8474 [1] FILM-FACE  
37. 7N-8001 Y [1] SWITCH GP-TOGGLE  
38. 7N-8597 [2] TERMINAL-BLADE  
39. 5H-6555 [2] LOCKWASHER  
40. 8T-8640 [1] SWITCH AS-PRESSURE  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7781 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
41. 3K-0360 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150321
 

9D-9840: ADAPTER GP-TRANSMISSION

9D-9840 ADAPTER GP-TRANSMISSION
S/N 93U2679-UP
PART OF 8D-5570 POWER TRAIN AR
i00122858 SEBP1715
9D9840 ADAPTER GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 3B-4507 [11] LOCKWASHER  
3. 2P-4443 [1] COUPLING-FLYWHEEL  
4. 4S-5824 [1] RETAINER  
5. 0S-1579 [1] BOLT (1/2-20X2-IN)  
6. 8F-6711 [1] SEAL-O-RING  
7. 9H-0846 C [1] SEAL-O-RING  
8. 0T-0768 [11] BOLT (7/16-14X1.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150322
 

2P-6899: CASE GP-TRANSMISSION

2P-6899 CASE GP-TRANSMISSION
S/N 2DA1187-UP
PART OF 2P-6900 GEAR & CASE GP-TRANSFER
i00122030 SEBP1715
2P6899 CASE GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-0229 [2] SLEEVE  
2. 2P-6928 [1] TUBE  
3. 0L-2061 [2] DOWEL  
4. 9M-4007 [2] DOWEL  
5. 2P-6897 [1] TUBE  
6. 1P-8594 [4] SLEEVE  
7. 4K-0149 [1] PLUG-CUP  
8. 2P-5720 [1] TUBE  
9. 2P-5721 [1] TUBE  
10. 2P-5719 [1] TUBE  
11. 6T-3118 C [1] TUBE  
12. 2P-5780 [2] SLEEVE  
13. 2P-6929 [1] TUBE  
14. 2P-6898 [1] TUBE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150323
 

6G-1740: CHAIN GP-DRIVE

6G-1740 CHAIN GP-DRIVE
S/N 93U2679-UP
PART OF 8D-5570 POWER TRAIN AR
i00122181 SEBP1715
6G1740 CHAIN GP-DRIVE Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-1601 [4] CHAIN GP  
    (EACH INCLUDES)
2. 6G-1602 [1] LINK-CONNECTING (MASTER)  
 

#SEBP17150324
 

8W-3055: CONTROL GP-DIFFERENTIAL LOCK

8W-3055 CONTROL GP-DIFFERENTIAL LOCK
S/N 93U2679-UP
PART OF 8W-2424 CHASSIS AR
i00146920 SEBP1715
8W3055 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7982 [1] ELBOW (9/16-18-THD)  
2. 5D-1258 I [1] HOSE AS  
3. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)  
4. 7N-8000 Y [1] SWITCH GP-TOGGLE  
5. 7N-8597 [2] TERMINAL-BLADE  
  5H-6555 [2] LOCKWASHER  
6. 3K-8782 [1] FUSE (10-AMPERE)  
7. 5P-7981 BC [2] ELBOW  
  3J-7354 BC [2] SEAL-O-RING  
8. 8M-4438 [2] SEAL-O-RING  
9. 9M-8406 [1] CLIP (LOOP)  
10. 8T-2501 [2] BOLT (3/8-16X2-IN)  
11. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 6V-3966 BC [1] FITTING AS  
13. 7T-9073 Y [1] VALVE & MTG GP-DIFF LOCK  
14. 6V-0852 BC [2] CAP-DUST  
15. 3J-1907 BC [2] SEAL-O-RING  
16. 8T-2353 BC [1] ADAPTER  
17. 6V-3965 BC [1] FITTING (QUICK DISCONNECT)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150325
 

2P-5810: CONTROL GP-TRANSMISSION HYD

2P-5810 CONTROL GP-TRANSMISSION HYD
S/N 2DA1187-UP
PART OF 3P-0300 TRANSMISSION AR
i00146637 SEBP1715
2P5810 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-5812 Y [1] VALVE GP-TRANSMISSION CONTROL  
2. 5F-6044 [2] BOLT (3/8-16X9-IN)  
3. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 7T-1188 Y [1] VALVE GP-CONTROL (RELIEF)  
5. 0L-1352 [4] BOLT (3/8-16X3.25-IN)  
  3B-4506 [4] LOCKWASHER  
6. 6F-6673 [1] SEAL-O-RING  
7. 3H-0107 [1] SEAL-O-RING  
8. 2J-0157 [2] SEAL-O-RING  
9. 2H-3932 [3] SEAL-O-RING  
10. 4F-0411 [2] BOLT (3/8-16X6.5-IN)  
11. 3P-2781 [1] PLATE  
12. 1T-0416 [1] BOLT (5/16-18X0.75-IN)  
13. 2P-7045 [1] SLEEVE  
14. 8M-4389 C [8] SEAL-O-RING  
15. 2P-7044 [1] SLEEVE  
16. 2P-4549 [2] SLEEVE  
17. 6V-0852 [2] CAP-DUST  
  3J-1907 [2] SEAL-O-RING  
  6V-3965 [2] FITTING (QUICK DISCONNECT)  
18. 3P-2777 [1] PLATE  
19. 6P-5096 [2] LINK-EXTENSION  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150326
 

4N-1559: COOLER GP-TRANSMISSION OIL

4N-1559 COOLER GP-TRANSMISSION OIL
S/N 11N1-99999; 70V23409-99999; A5X507-UP; A5Y1-UP
PART OF 137-8513, 7W-5178, 7W-5179 ENGINE AR
ALSO AN ATTACHMENT
i00122075 SEBP1715
4N1559 COOLER GP-TRANSMISSION OIL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2001 [1] PLATE AS  
  6B-0430 [2] BOSS  
2. 295-5609 [2] SEAL-O-RING  
3. 4B-3388 [8] BOLT (5/16-18X1.125-IN)  
4. 132-8594 [1] CORE AS-OIL COOLER (TRANSMISSION)  
5. 4L-1267 [1] GASKET  
6. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150327
 

3P-2770: COVER GP-SHIPPING

3P-2770 COVER GP-SHIPPING
S/N 2DA1187-UP
PART OF 3P-0300 TRANSMISSION AR
i00122067 SEBP1715
3P2770 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-2927 [1] COVER-SHIPPING  
2. 0T-0573 [6] BOLT (3/8-16X2.75-IN)  
4. 9S-8752 [6] NUT-FULL (3/8-16-THD)  
5. 3P-5640 [2] GASKET  
6. 3P-5639 [1] COVER  
7. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
8. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-4183 [2] PLUG (1-1/16-12-THD)  
10. 3D-2824 [2] SEAL-O-RING  
11. 190-9841 [1] COVER-SHIPPING  
12. 1D-4585 [7] BOLT (5/8-11X3.25-IN)  
13. 4B-4281 [7] WASHER (16.8X33X2.5-MM THK)  
14. 4K-0367 [7] NUT-FULL (5/8-11-THD)  
16. 3P-7731 [1] COVER  
17. 0T-0102 [2] BOLT (3/8-16X0.625-IN)  
18. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
19. 4D-1577 [1] SEAL-O-RING  
20. 9H-0846 [1] SEAL-O-RING  
21. 7F-8268 [1] SEAL-O-RING  
22. 4F-8946 [1] SEAL-O-RING  
23. 4F-7952 [1] SEAL-O-RING  
 

#SEBP17150328
 

8D-4290: DIFFERENTIAL & BEVEL GEAR GP

8D-4290 DIFFERENTIAL & BEVEL GEAR GP
S/N 93U2679-UP
PART OF 8D-5570 POWER TRAIN AR
i00122430 SEBP1715
8D4290 DIFFERENTIAL & BEVEL GEAR GP Parts scheme 8D4290 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-9110 [1] HOUSING AS  
2. 3D-8439 [10] STUD (5/8-11X3.4-IN)  
3. 5K-9107 C [1] BOLT-LOCKING (3/8-16X0.75-IN)  
  5M-2894 C [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8D-3946 [1] CAGE  
5. 6G-4703 C [1] NUT (5 1/4-12-THD)  
6. 030-0061 C [1] CONE-BEARING  
7. 030-0060 C [1] CUP-BEARING  
8. 3F-1523 [1] DOWEL  
9. 8D-4038 [2] LOCK  
10. 6K-7917 C [2] BOLT-LOCKING (1/2-13X1-IN)  
  5P-8245 C [2] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8D-4300 Y [1] DIFFERENTIAL GP  
12. 6G-6272 C [2] RING-SEAL  
13. 2G-7414 C [1] RING  
14. 2G-7759 C [1] CAGE AS  
  2D-6642 [1] BALL  
15. 2N-3254 [1] CONE-BEARING  
16. 2N-3253 [1] CUP-BEARING  
17. 6G-4705 C [1] NUT  
18. 9D-8799 [1] RING  
  2S-1914 [1] SEAL-RING  
19. 5H-8038 [1] SEAL-O-RING  
20. 4K-0367 [20] NUT-FULL (5/8-11-THD)  
21. 2S-5658 C [24] WASHER-HARD (17X29X3-MM THK)  
22. 0S-1592 [4] BOLT (5/8-11X1.25-IN)  
23. 7F-8268 [1] SEAL-O-RING  
24. 5M-2894 C [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 034-3557 C [6] BOLT-LOCKING (3/8-16X1.125-IN)  
26. 8D-4164 [1] COVER  
27. 030-8535 C [5] BOLT-LOCKING (3/8-16X0.875-IN)  
28. 8D-4227 [1] SPACER  
29. 4D-1577 [1] SEAL-O-RING  
30. 4F-7952 [1] SEAL-O-RING  
31. 4F-8946 [1] SEAL-O-RING  
32. 8D-4218 B [6] SHIM (.127MM THK)  
  8D-4219 B [6] SHIM (.178MM THK)  
33. 9D-1854 [1] SPACER-SPECIAL (12.7-MM THK)  
34. 9H-3360 [1] SEAL-O-RING  
35. 1P-7896 [1] CUP-BEARING  
36. 1P-7895 [1] CONE-BEARING  
37. 8D-8586 [1] CAGE  
38. 8D-8706 [1] CARRIER AS-DIFFERENTIAL  
39. 1D-4643 [4] BOLT (1-8X5.5-IN)  
  5F-6562 [4] WASHER-HARD (28X44.5X4-MM THK)  
  3D-8242 [4] SLEEVE  
40. 9D-3018 [1] TUBE AS  
  030-8535 C [1] BOLT-LOCKING (3/8-16X0.875-IN)  
  5M-2894 C [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 9M-3786 [1] SEAL-O-RING  
42. 8D-8587 [1] GEAR-TRANSFER (20 TEETH)  
43. 9D-4044 [1] HOSE  
44. 7H-1442 [1] CLAMP-HOSE  
45. 8D-2106 [1] PINION-BEVEL  
46. 4M-1552 [1] CONE-BEARING  
47. 3F-5920 [1] CUP-BEARING  
48. 8B-4967 [1] SEAL-O-RING  
49. 3D-8241 [1] SEAL-O-RING  
50. 8D-2277 [1] GEAR (24 TEETH)  
51. 9D-1853 [2] RETAINER  
52. 6B-5262 [1] PLUG  
  2A-3398 C [1] GASKET  
53. 2D-9454 [2] CUP-BEARING  
54. 2D-9455 [2] CONE-BEARING  
55. 9D-1324 [1] PLATE  
56. 4B-4043 [3] BOLT (5/8-11X1.375-IN)  
  9D-1404 [1] LOCKNUT  
57. 7D-8439 B [6] SHIM (0.007-IN THK)  
  7D-8441 B [6] SHIM (0.005-IN THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150329
 

8D-4300: DIFFERENTIAL GP

8D-4300 DIFFERENTIAL GP
S/N 93U2679-UP
PART OF 8D-4290 DIFFERENTIAL & BEVEL GEAR GP
i00122431 SEBP1715
8D4300 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9456 [1] GEAR-DIFFERENTIAL BEVEL (24-TEETH)  
2. 8D-3923 [2] WASHER-THRUST  
3. 111-8209 [1] SPIDER  
4. 8D-3917 [4] WASHER-THRUST  
5. 8D-4278 [1] SPACER  
6. 8D-1858 [1] GEAR-RING (63-TEETH)  
7. 8D-4250 [1] HOUSING AS  
  4B-9880 [1] BALL  
8. 3D-6509 [2] DOWEL  
9. 8D-3971 [1] SEAL-RING  
10. 8D-3937 [1] PISTON  
11. 8D-3972 [1] SEAL-RING  
12. 8D-3879 [7] DISC  
13. 6Y-7958 [6] DISC-FRICTION  
14. 8D-9457 [1] GEAR-DIFFERENTIAL BEVEL (24-TEETH)  
15. 1D-4609 [21] BOLT (3/4-10X3-IN)  
  2S-0115 [21] WASHER-HARD (20X36.5X5-MM THK)  
16. 8D-9459 [4] PINION AS  
    (EACH INCLUDES)
17. 174-6821 [1] BUSHING  
18. 8D-4325 [1] HOUSING AS  
19. 1A-8651 [8] BOLT (5/8-11X4.5-IN)  
  4D-3704 [8] WASHER-HARD (17X30X5-MM THK)  
20. 3D-6509 [6] DOWEL  
 

Information:

Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Caterpillar Parts SIS Catalog 16G :

WIRING GP-MONITOR
8W-3176 WIRING GP-MONITOR
WIRING GP-CAB
8W-1959 WIRING GP-CAB
WIRING GP-CAB
8W-1425 WIRING GP-CAB
WIRING GP-BLADE CUSHION
8W-1991 WIRING GP-BLADE CUSHION
WARNING GP-BACKUP
8W-1955 WARNING GP-BACKUP
SWITCH GP-TOGGLE
7N-8001 SWITCH GP-TOGGLE
SWITCH GP-TOGGLE
7N-8000 SWITCH GP-TOGGLE
SWITCH GP-START
9G-7641 SWITCH GP-START
ADAPTER GP-TRANSMISSION
9D-9840 ADAPTER GP-TRANSMISSION
CASE GP-TRANSMISSION
2P-6899 CASE GP-TRANSMISSION
CHAIN GP-DRIVE
6G-1740 CHAIN GP-DRIVE
CONTROL GP-DIFFERENTIAL LOCK
8W-3055 CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD
2P-5810 CONTROL GP-TRANSMISSION HYD
COOLER GP-TRANSMISSION OIL
4N-1559 COOLER GP-TRANSMISSION OIL
COVER GP-SHIPPING
3P-2770 COVER GP-SHIPPING
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.