AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5T-7158 DRIVE GP-FINAL S/N 93U2679-UP PART OF 8D-5570 POWER TRAIN AR 16G MOTOR GRADER


POWER TRAIN
DRIVE GP-FINAL
FILLER GP-POWER TRAIN OIL
FILTER GP
GEAR GP
LINES GP-POWER TRAIN OIL
TRANSMISSION GP

MOTOR GRADER 16G MOTOR GRADER 93U
 16G Motor Grader 93U02679-UP (MACHINE) POWERED BY 3406 Engine SEBP1715 16G 93U   (1973)

POWER TRAIN

DRIVE GP-FINAL
DRIVE GP-FINAL
5T-7158 DRIVE GP-FINAL
 

#SEBP17150330
 

5T-7158: DRIVE GP-FINAL

5T-7158 DRIVE GP-FINAL
S/N 93U2679-UP
PART OF 8D-5570 POWER TRAIN AR
i00122147 SEBP1715
5T7158 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9333 [2] SHAFT AS-DRIVE  
    (EACH INCLUDES)
  8D-2161 [1] BEARING  
2. 8D-1669 [2] GEAR-SUN (18-TEETH)  
3. 8D-1761 [2] CARRIER-PLANETARY  
4. 030-8535 [16] BOLT-LOCKING (3/8-16X0.875-IN)  
5. 5M-2894 C [38] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 7D-0035 [8] PLATE  
7. 8D-1666 [2] GEAR-RING (78-TEETH)  
8. 9H-3360 [2] SEAL-O-RING  
9. 4D-6419 [46] WASHER-HARD (24X40X5-MM THK)  
10. 2J-3505 [46] NUT-FULL (7/8-9-THD)  
11. 8D-2258 [2] RING-RETAINING  
12. 6V-8385 [2] SEAL-LIP TYPE  
13. 8D-2243 [2] WASHER (2.56X5.50X0.25-MM THK)  
14. 8D-2423 [2] SHAFT-DRIVE  
15. 6G-3208 [4] WASHER-THRUST (395.12X449.53X6.97-MM THK)(395.12X449.53X6.97-MM THK)  
16. 8T-6469 C [56] BOLT-LOCKING  
17. 2S-0115 [96] WASHER-HARD (20X36.5X5-MM THK)  
18. 8D-4771 [2] SEAL-O-RING  
19. 8W-8346 [4] SPROCKET (23-TEETH)  
20. 0S-1571 [10] BOLT (3/8-16X1.75-IN)  
22. 8D-1803 [2] NUT (4 1/2-12-3B THD)  
23. 6G-3645 B [2] SHIM PACK (EACH INCLUDES 9 SHIMS)  
24. 1H-5728 [2] SEAL-O-RING  
25. 8D-8233 [2] RETAINER  
26. 9K-1172 [2] CONE-BEARING  
27. 9K-1171 [4] CUP-BEARING  
28. 1D-4609 [40] BOLT (3/4-10X3-IN)  
30. 219-2439 [2] RETAINER  
32. 219-2436 [4] RING-WEAR  
33. 5T-7127 [2] HOUSING  
34. 8D-2311 [2] SEAL-LIP TYPE  
35. 8D-2256 [2] CONE-BEARING  
36. 5T-7131 [2] HOUSING  
37. 8D-1671 [6] GEAR-PLANETARY (29-TEETH)  
38. 8D-2424 [6] SPACER (3.50X4.37X0.18-MM THK)  
39. 2D-6516 [12] BEARING AS-ROLLER  
40. 8X-8378 [12] WASHER (85.32X131.80X2.92-MM THK)  
41. 8W-2309 C [6] SHAFT  
42. 273-2457 [6] RETAINER  
43. 5D-0353 C [12] BOLT-LOCKING (3/8-16X1-IN)  
44. 9F-2247 [2] PLUG-PIPE  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150331
 

8D-5820: FILLER GP-POWER TRAIN OIL

8D-5820 FILLER GP-POWER TRAIN OIL
S/N 93U2679-UP
PART OF 8D-5570 POWER TRAIN AR
i00147362 SEBP1715
8D5820 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-9333 [1] CAP-FILLER  
2. 2G-8516 C [1] GAUGE  
3. 8D-5852 [1] TUBE AS  
4. 7X-3327 [2] BOLT-LOCKING (1/2-13X1.25-IN)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 5F-3181 [1] GASKET  
6. 5D-0353 C [2] BOLT-LOCKING (3/8-16X1-IN)  
7. 9D-0195 [1] CLIP  
8. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
9. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-8801 [1] NUT (3/8-16-THD)  
11. 8D-5851 [1] TUBE AS  
12. 5B-1983 [1] BOSS (3/8-16-THD)  
13. 7F-8268 [1] SEAL-O-RING  
14. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
  8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150332
 

6P-2091: FILTER GP-OIL

6P-2091 FILTER GP-OIL -POWER TRAIN
S/N 2DA1187-UP
PART OF 3P-0300 TRANSMISSION AR
i00108137 SEBP1715
6P2091 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
2. 3T-0688 C [1] SPOOL  
3. 9M-1986 C [1] SPRING  
4. 9S-4191 C [1] PLUG (9/16-18-THD)  
5. 6P-2090 [1] BASE-XMSN OIL FILTER  
6. 9M-9740 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)(DISPOSABLE TRANSMISSION OIL)  
    -OR-
  4T-3131 CA [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)(FIRE RESISTANT FLUID)  
    -OR-
  132-8875 A [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(HIGH PERFORMANCE)  
7. 3S-8652 [1] SPRING  
8. 7S-6745 [1] RETAINER  
9. 2J-6356 [1] RING-RETAINING  
10. 3P-0887 [1] HOUSING AS  
11. 2S-8439 [1] SEAL-O-RING  
12. 9S-8004 C [1] PLUG (9/16-18-THD)  
13. 3J-1907 [2] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150333
 

6P-2091: FILTER GP-OIL

6P-2091 FILTER GP-OIL -POWER TRAIN
S/N 2DA1187-1740
PART OF 3P-0300 TRANSMISSION AR
i00145435 SEBP1715
6P2091 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
2. 3T-0688 [1] SPOOL  
3. 9M-1986 [1] SPRING  
4. 1N-5999 C [1] PLUG-O-RING  
  7J-0204 C [1] SEAL-O-RING  
5. 6P-2090 [1] BASE-XMSN OIL FILTER  
6. 9M-9740 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)(DISPOSABLE TRANSMISSION OIL)  
    -OR-
  4T-3131 A [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)(FIRE RESISTANT FLUID)  
    -OR-
  132-8875 A [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(HIGH PERFORMANCE)  
7. 3S-8652 [1] SPRING  
8. 7S-6745 [1] RETAINER  
9. 2J-6356 [1] RING-RETAINING  
10. 6Y-0162 C [1] HOUSING-FILTER  
11. 2S-8439 [1] SEAL-O-RING  
12. 9S-8004 [1] PLUG (9/16-18-THD)  
13. 3J-1907 C [1] SEAL-O-RING  
14. 6Y-0163 C [1] RETAINER  
15. 3K-0360 C [1] SEAL-O-RING  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150334
 

6P-2091: FILTER GP-OIL

6P-2091 FILTER GP-OIL -POWER TRAIN
S/N 2DA1741-UP
PART OF 3P-0300 TRANSMISSION AR
i00122213 SEBP1715
6P2091 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 315-9859 [1] PLUG AS  
  9S-8008 [1] PLUG (1-1/16-12-THD)  
  238-5082 [1] SEAL-O-RING  
2. 6T-9222 [1] SPOOL  
3. 133-2199 [1] SPRING  
4. 244-3712 [1] PLUG AS  
  214-7568 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
5. 6P-2090 [1] BASE-XMSN OIL FILTER  
6. 343-4464 [1] FILTER ELEMENT-OIL (ADVANCED EFFICIENCY)(DISPOSABLE TRANSMISSION OIL)  
7. 3S-8652 [1] SPRING  
8. 7S-6745 [1] RETAINER  
9. 2J-6356 [1] RING-RETAINING  
10. 3P-0887 C [1] HOUSING AS  
11. 2S-8439 [1] SEAL-O-RING  
12. 183-3407 C [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150335
 

2P-6900: GEAR & CASE GP-TRANSFER

2P-6900 GEAR & CASE GP-TRANSFER
S/N 2DA1187-1486
PART OF 3P-0300 TRANSMISSION AR
i00147095 SEBP1715
2P6900 GEAR & CASE GP-TRANSFER Parts scheme 2P6900 GEAR & CASE GP-TRANSFER Parts scheme 2P6900 GEAR & CASE GP-TRANSFER Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6553 [1] ELBOW  
2. 9G-5127 C [1] BREATHER AS  
3. 1P-8654 [2] EYE-LIFTING  
4. 0S-1589 [2] BOLT (5/8-11X1.75-IN)  
  3B-4510 [2] LOCKWASHER  
5. 3P-3287 [2] CAGE-BEARING  
6. 1A-2029 [12] BOLT (3/8-16X1.125-IN)  
7. 3B-4506 [57] LOCKWASHER  
8. 9S-4185 [2] PLUG (3/4-16-THD)  
  3K-0360 [2] SEAL-O-RING  
9. 0L-2315 [1] BOLT (1/2-20X3.5-IN)  
10. 4S-5824 [1] RETAINER  
11. 7F-8268 [1] SEAL-O-RING  
12. 4F-7952 [1] SEAL-O-RING  
13. 0S-1594 [29] BOLT (3/8-16X1-IN)  
14. 8S-9130 [1] SCREEN-SUCTION  
15. 8S-9129 [1] FILTER-MAGNETIC  
16. 4H-5440 [1] COVER  
  3S-7781 [1] GASKET  
17. 1D-4719 [11] NUT-FULL (1/2-13-THD)  
18. 3B-4508 [34] LOCKWASHER  
19. 3P-1656 [1] MANIFOLD  
  4F-9029 [1] SEAL  
  3H-0107 [1] SEAL-O-RING  
20. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
  9S-1366 [1] BOLT (1/2-13X2.5-IN)  
21. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
22. 4T-2069 C [1] PLUG  
23. 3P-7160 [1] COVER AS  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
  7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
24. 2N-0931 [1] GASKET  
25. 0S-1590 [4] BOLT (3/8-16X2-IN)  
26. 4S-8598 [1] SCREEN-SUCTION  
27. 4S-8603 [1] SCREEN GP-MAGNETIC  
28. 1D-4717 [12] NUT (3/8-16-THD)  
29. 9S-8009 [3] PLUG-O-RING  
  4K-1388 [3] SEAL-O-RING  
30. 3P-3251 [1] COVER-INSPECTION  
  3P-3252 [1] GASKET  
31. 6T-1233 [1] COVER AS  
  6T-1235 [1] GASKET  
32. 0S-1587 [15] BOLT (1/2-13X1.75-IN)  
33. 2P-6899 Y [1] CASE GP-TRANSMISSION  
34. 2H-3932 C [5] SEAL-O-RING  
35. 3K-4897 [2] PIN-SPRING  
36. 3P-3426 [1] LEVER  
37. 3P-3424 [1] SHAFT  
38. 3P-3425 [1] LEVER  
39. 6K-8088 [1] BEARING-ROLLER  
40. 2N-7609 [1] BEARING-ROLLER  
41. 4M-0189 [2] SEAL-O-RING  
42. 9B-0576 C [2] LOCKNUT-BEARING  
  6P-1735 [2] LOCKWASHER  
  6P-1736 [2] WASHER (55.17X76.2X2.67-MM THK)  
43. 1K-6986 [2] RING-RETAINING  
44. 3P-2860 [2] PLATE-REACTION  
  9S-6913 [2] RING-SEAL  
  5H-8848 [2] SEAL-O-RING  
45. 3P-2859 [2] DRUM AS  
46. 1P-9261 [2] SEAL-RING  
47. 3P-2856 [2] PLATE-CLUTCH PRESSURE  
48. 3P-0392 [14] DISC-FRICTION  
49. 3P-2855 [14] PLATE-CLUTCH  
50. 3P-2852 [2] CLUTCH-HUB  
51. 3P-2850 [1] GEAR-TRANSFER (80 TEETH)  
52. 4M-5893 [12] SPRING  
53. 0S-1595 [16] BOLT (1/2-13X1.25-IN)  
54. 9P-4857 C [4] CARRIER-RING  
55. 3P-2854 [2] SHAFT AS-CLUTCH  
    (EACH INCLUDES)
  8H-9208 C [1] DOWEL  
56. 1S-9292 C [2] DOWEL  
57. 3P-7009 [1] PLUG-CUP  
58. 1L-8497 [2] RING-SNAP  
59. 8P-0492 C [4] RING-SEAL  
60. 7J-8894 [2] CUP-BEARING  
  7J-8893 [2] CONE-BEARING  
61. 3P-7019 [4] SEAL-METAL  
62. 2P-5820 [2] SEAL-O-RING  
  2P-4534 [2] RING-SEAL  
63. 3P-2874 [2] PISTON-CLUTCH  
64. 2P-7032 [2] SPACER-BEARING (INNER)  
  2P-7033 [2] SPACER-BEARING (OUTER)  
65. 7K-5448 [4] CUP-BEARING  
  7K-5449 [4] CONE-BEARING  
66. 1H-6227 [2] SEAL-O-RING  
67. 3D-9126 [2] CUP  
  3D-9125 [2] CONE-BEARING  
68. 2P-4468 B [2] SHIM PACK (INCLUDES 12-SHIMS)(2.13MM THK)  
    (EACH INCLUDES 12 SHIMS)
69. 3D-8422 [1] SEAL-O-RING  
70. 2P-4440 [1] GEAR (47 TEETH)  
71. 9P-4857 C [1] CARRIER-RING  
72. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
73. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
74. 1P-2636 [1] CUP-BEARING  
75. 1P-2662 [1] CONE-BEARING  
76. 3P-2851 [1] GEAR-TRANSFER (80-TEETH)(80 TEETH)  
77. 8P-0492 C [1] RING-SEAL  
78. 3P-2769 C [1] SUPPORT AS  
79. 9P-6264 [1] BUSHING  
80. 3D-0490 [9] STUD-TAPERLOCK (1/2-13X1.97-IN)  
81. 3D-6627 [2] STUD-TAPERLOCK  
82. 7J-5367 [1] LOCKNUT  
  2P-4471 [1] LOCKNUT  
83. 7D-8637 [2] CUP-BEARING  
  7D-8636 [2] CONE-BEARING  
84. 3P-1619 [1] GEAR-TRANSFER (57-TEETH)  
85. 2P-7034 [1] SPACER-BEARING (OUTER)  
  2P-7035 [1] SPACER-BEARING (INNER)  
86. 9F-1399 [1] SEAL-O-RING  
87. 3K-2559 [1] RING-RETAINING  
88. 3H-0107 [2] SEAL-O-RING  
89. 3P-2865 [1] SHAFT AS-IDLER  
90. 8M-6521 [1] DOWEL (PIN)  
91. 8M-0903 [1] RING-RETAINING  
92. 4F-9653 [1] SEAL-O-RING  
93. 6M-9497 [1] BEARING AS-ROLLER  
94. 3P-2863 [1] GEAR-IDLER (40 TEETH)  
95. 7K-5448 [1] CUP-BEARING  
  7K-5449 [1] CONE-BEARING  
96. 2P-4423 [1] CAGE-BEARING  
  3P-0322 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
97. 3P-3440 [1] COUPLING AS  
98. 1T-0068 [2] PIN-SPRING  
99. 1F-6726 [1] TUBE-OIL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150336
 

2P-6900: GEAR & CASE GP-TRANSFER

2P-6900 GEAR & CASE GP-TRANSFER
S/N 2DA1487-UP
PART OF 3P-0300 TRANSMISSION AR
i00147096 SEBP1715
2P6900 GEAR & CASE GP-TRANSFER Parts scheme 2P6900 GEAR & CASE GP-TRANSFER Parts scheme 2P6900 GEAR & CASE GP-TRANSFER Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6553 [1] ELBOW  
2. 9G-5127 [1] BREATHER AS (TRANSFER GEAR)  
3. 1P-8654 [2] EYE-LIFTING  
4. 0S-1589 [2] BOLT (5/8-11X1.75-IN)  
  4D-3704 [2] WASHER-HARD (17X30X5-MM THK)  
5. 3P-3287 [2] CAGE-BEARING  
6. 1A-2029 [12] BOLT (3/8-16X1.125-IN)  
7. 5M-2894 [58] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 9S-4185 [2] PLUG (3/4-16-THD)  
  3K-0360 [2] SEAL-O-RING  
9. 0L-2315 [1] BOLT (1/2-20X3.5-IN)  
10. 4S-5824 [1] RETAINER  
11. 7F-8268 C [1] SEAL-O-RING  
12. 4F-7952 C [1] SEAL-O-RING  
13. 0S-1594 [30] BOLT (3/8-16X1-IN)  
14. 8S-9130 [1] SCREEN-SUCTION  
15. 8S-9129 [1] FILTER-MAGNETIC  
16. 4H-5440 [1] COVER  
  3S-7781 [1] GASKET  
17. 1D-4719 [11] NUT-FULL (1/2-13-THD)  
18. 2M-0849 [30] WASHER-HARD (13.5X25.5X5-MM THK)  
19. 3P-1656 [1] MANIFOLD  
  4F-9029 [1] SEAL  
  3H-0107 [1] SEAL-O-RING  
20. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
  9S-1366 [1] BOLT (1/2-13X2.5-IN)  
21. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
22. 4T-2069 [1] PLUG  
23. 3P-7160 [1] COVER AS  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
  7S-2962 [1] WASHER-SPRING (52.3X82.5X9.1-MM THK)  
24. 2N-0931 [1] GASKET  
25. 0S-1590 [4] BOLT (3/8-16X2-IN)  
26. 4S-8598 [1] SCREEN-SUCTION  
27. 240-8259 [1] SCREEN GP-MAGNETIC  
28. 6V-8801 [12] NUT (3/8-16-THD)  
29. 9S-8009 [3] PLUG-O-RING  
  4K-1388 [3] SEAL-O-RING  
30. 3P-3251 [1] COVER-INSPECTION  
  3P-3252 [1] GASKET  
31. 6T-1233 [1] COVER AS  
  5M-9621 [12] STUD-WELD (3/8-16-THD)  
  6T-1235 [1] GASKET  
32. 0S-1587 [15] BOLT (1/2-13X1.75-IN)  
33. 2P-6899 Y [1] CASE GP-TRANSMISSION  
34. 2H-3932 [5] SEAL-O-RING  
35. 3K-4897 [2] PIN-SPRING  
36. 3P-3426 [1] LEVER  
37. 3P-3424 [1] SHAFT  
38. 3P-3425 [1] LEVER  
39. 103-5962 [1] BEARING AS-NEEDLE  
40. 2N-7609 [1] BEARING-ROLLER  
41. 4M-0189 [2] SEAL-O-RING  
42. 9B-0576 [2] LOCKNUT-BEARING  
  6P-1735 [2] LOCKWASHER  
  6P-1736 [2] WASHER (55.17X76.2X2.67-MM THK)  
43. 1K-6986 [2] RING-RETAINING  
44. 9W-4136 C [2] PLATE-REACTION  
  9S-6913 [2] RING-SEAL  
  5H-8848 [2] SEAL-O-RING  
45. 3P-2859 [2] DRUM AS  
46. 1P-9261 [2] SEAL-RING  
47. 3P-2856 [2] PLATE-CLUTCH PRESSURE  
48. 8E-1204 [14] DISC-FRICTION  
49. 3P-2855 [14] PLATE-CLUTCH  
50. 3P-2852 [2] CLUTCH-HUB  
51. 3P-2850 [1] GEAR-TRANSFER (80-TEETH)  
52. 4M-5893 [12] SPRING  
53. 0S-1595 [16] BOLT (1/2-13X1.25-IN)  
54. 9P-4857 [4] CARRIER-RING  
55. 3P-2854 [2] SHAFT AS-CLUTCH  
    (EACH INCLUDES)
  8H-9208 [1] DOWEL  
56. 1S-9292 [2] DOWEL  
57. 3P-7009 [1] PLUG-CUP  
58. 1L-8497 [2] RING-SNAP  
59. 8P-0492 [4] RING-SEAL  
60. 7J-8894 [2] CUP-BEARING  
  7J-8893 [2] CONE-BEARING  
61. 3P-7019 [4] SEAL-METAL  
62. 2P-5820 [2] SEAL-O-RING  
  2P-4534 [2] RING-SEAL  
63. 135-0524 [2] PISTON-CLUTCH  
64. 2P-7032 [2] SPACER-BEARING (INNER)  
  2P-7033 [2] SPACER-BEARING (OUTER)  
65. 7K-5448 [4] CUP-BEARING  
  7K-5449 [4] CONE-BEARING  
66. 1H-6227 [2] SEAL-O-RING  
67. 3D-9126 [2] CUP  
  3D-9125 [2] CONE-BEARING  
68. 2P-4468 B [2] SHIM PACK (INCLUDES 12-SHIMS)  
    (EACH INCLUDES 12 SHIMS)
69. 3D-8422 [1] SEAL-O-RING  
70. 2P-4440 [1] GEAR (47-TEETH)  
71. 9P-4857 [1] CARRIER-RING  
72. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
73. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
74. 1P-2636 [1] CUP-BEARING  
75. 1P-2662 [1] CONE-BEARING  
76. 3P-2851 [1] GEAR-TRANSFER (80-TEETH)  
77. 8P-0492 [1] RING-SEAL  
78. 6Y-0576 C [1] SUPPORT AS  
79. 6Y-0306 C [1] BUSHING  
80. 5M-1932 C [9] STUD-TAPERLOCK (1/2-13X2.17-IN)  
81. 2D-8426 C [2] STUD-TAPERLOCK (1/2-13X3.19-IN)  
  9P-4857 [1] CARRIER-RING  
82. 6W-4750 [1] NUT-STAKE (LOCK)  
  6W-4749 [1] WASHER (75.5X106X5-MM THK)  
83. 6I-8286 [2] CUP-BEARING  
  7D-8636 [2] CONE-BEARING  
84. 3P-1619 [1] GEAR-TRANSFER (57-TEETH)  
85. 2P-7034 [1] SPACER-BEARING (OUTER)  
  2P-7035 [1] SPACER-BEARING (INNER)  
86. 9F-1399 [1] SEAL-O-RING  
87. 3K-2559 [1] RING-RETAINING  
88. 3H-0107 [2] SEAL-O-RING  
89. 3P-2865 [1] SHAFT AS-IDLER  
90. 8M-6521 [1] DOWEL  
91. 8M-0903 [1] RING-RETAINING  
92. 4F-9653 C [1] SEAL-O-RING  
93. 165-0002 [1] BEARING AS  
94. 3P-2863 [1] GEAR-IDLER (40-TEETH)  
95. 7K-5448 [1] CUP-BEARING  
  7K-5449 [1] CONE-BEARING  
96. 2P-4423 [1] CAGE-BEARING  
97. 3P-3440 [1] COUPLING AS  
98. 1T-0068 [2] PIN-SPRING  
99. 1F-6726 [1] TUBE-OIL  
100. 3P-0322 B [1] SHIM PACK (INCLUDES 12-SHIMS)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150337
 

2P-9194: LINES GP-POWER TRAIN OIL

2P-9194 LINES GP-POWER TRAIN OIL
S/N 2DA1187-UP
PART OF 3P-0300 TRANSMISSION AR
i00146645 SEBP1715
2P9194 LINES GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
2. 3B-4508 [10] LOCKWASHER  
3. 2P-7065 [1] TUBE AS  
4. 9S-1366 [2] BOLT (1/2-13X2.5-IN)  
5. 7F-8268 C [1] SEAL-O-RING  
6. 5F-8000 C [2] SEAL-O-RING  
7. 2P-7067 [1] TUBE AS  
8. 6F-6673 C [4] SEAL-O-RING  
9. 7H-7954 [2] BOLT (3/8-16X2.125-IN)  
10. 3B-4506 [17] LOCKWASHER  
11. 5H-2767 C [1] SEAL-O-RING  
12. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
13. 4F-7952 C [2] SEAL-O-RING  
14. 7B-3235 [2] BOLT (1/2-13X1.375-IN)  
15. 2P-7069 [1] TUBE AS  
16. 1A-2029 C [7] BOLT (3/8-16X1.125-IN)  
17. 0S-1573 [2] BOLT (1/2-13X4-IN)  
18. 7F-8267 C [1] SEAL-O-RING  
19. 8P-1257 [1] TUBE AS  
20. 0S-1594 [4] BOLT (3/8-16X1-IN)  
21. 7F-3425 C [2] BOLT (3/8-16X5.75-IN)  
22. 3P-0884 [1] GASKET-TRANSMISSION PUMP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17150338
 

2P-5800: PLANETARY GP-TRANSMISSION

2P-5800 PLANETARY GP-TRANSMISSION
S/N 2DA1187-1486
PART OF 3P-0300 TRANSMISSION AR
i00146636 SEBP1715
2P5800 PLANETARY GP-TRANSMISSION Parts scheme 2P5800 PLANETARY GP-TRANSMISSION Parts scheme 2P5800 PLANETARY GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4426 [3] SHAFT AS-PLANETARY  
    (EACH INCLUDES)
  2A-3746 [1] PLUG-CUP  
2. 4M-3915 [6] BEARING-CAGED  
3. 2P-1098 [1] RETAINER  
4. 1K-6995 [2] RING-LOCK  
5. 3P-1602 [1] SHAFT AS  
    (EACH INCLUDES)
  2P-5780 [1] SLEEVE  
6. 3P-1603 [1] TUBE  
7. 6V-1720 C [1] PLATE-SERIAL NUMBER (TRANSMISSION)  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
8. 3P-0896 [1] RING-RETAINING  
9. 2P-4522 [1] GEAR-SUN (33-TEETH)  
10. 5M-5018 [14] BEARING-ROLLER  
11. 2P-4429 [3] SHAFT AS-PLANETARY  
    (EACH INCLUDES)
  2A-3746 [1] PLUG-CUP  
12. 3S-2708 [10] PIN-SPRING  
13. 3P-0862 [1] CARRIER-INPUT  
14. 2P-4431 [1] GEAR-RING (84-TEETH)  
15. 8E-8304 C [14] DISC-THRUST  
16. 7G-3455 C [3] GEAR-PLANETARY (24-TEETH)  
17. 2P-4542 [1] SPACER  
18. 2K-5986 [10] PIN-SPRING  
19. 5M-2055 [16] BEARING-CAGED  
20. 7G-3454 C [8] GEAR (17-TEETH)  
21. 4S-8670 [8] SHAFT-PLANETARY  
22. 8E-8297 C [16] DISC-THRUST  
23. 2P-4523 [1] GEAR-SUN (47-TEETH)  
24. 2P-4433 [2] GEAR-RING (81-TEETH)  
25. 3P-1609 [1] CARRIER-PLANETARY  
26. 3P-0895 [1] BALL BEARING  
27. 0L-1351 [8] BOLT (3/8-16X0.875-IN)  
  2S-2314 [4] LOCKNUT  
28. 3P-0888 [1] CAGE-BEARING  
29. 9F-8477 [1] RING-METAL SEAL  
30. 3P-1621 [1] CARRIER AS  
  8B-1312 [2] DOWEL  
31. 5P-7602 [1] BALL BEARING  
32. 2P-1097 [1] RETAINER  
  8H-8830 [1] RING-RETAINING  
33. 3P-1600 [1] CAGE AS  
  4S-8537 [1] DOWEL  
34. 3P-1666 [1] GEAR-SUN (47-TEETH)  
35. 2P-5694 [1] CAGE-BEARING  
36. 2P-4435 [1] PLATE  
37. 3P-6880 [1] HOUSING AS-CLUTCH  
  5M-7937 [4] DOWEL  
38. 3P-2373 [1] HOUSING AS-CLUTCH  
  5M-7937 [4] DOWEL  
39. 2P-4363 [1] HOUSING-CLUTCH  
40. 9M-4355 [12] DAMPER-BOLT  
41. 6Y-2027 C [20] DISC-FRICTION  
42. 8P-1656 [14] PLATE-CLUTCH  
43. 3P-1652 [1] HOUSING AS  
  5F-4250 [2] PIN  
  5H-8985 [10] PIN-SPRING  
44. 3P-1681 C [4] DOWEL-REACTION  
45. 3P-1651 [1] PISTON AS  
  5H-8985 [10] PIN-SPRING  
46. 3P-1601 [4] PLUNGER  
47. 2B-2254 [4] SPRING  
48. 7T-9647 C [1] PISTON-CLUTCH  
49. 3P-2692 [1] CAGE-BEARING  
50. 0T-0055 [30] BOLT (3/8-16X4.25-IN)  
  5M-2894 [30] WASHER-HARD (10.2X18.5X2.5-MM THK)  
51. 3P-1626 [1] HUB AS  
52. 3P-0817 [5] SPRING-DISC  
53. 3P-0814 [1] RING-SEAL  
54. 9S-4368 [1] RING-RETAINING  
55. 3P-0815 [1] SEAL-O-RING  
  3P-0800 [1] RING-SEAL  
56. 3P-2672 [1] BALL BEARING  
57. 7M-8514 C [1] RING-RETAINING  
    -OR-
  9H-3452 C [1] RING-RETAINING  
58. 0S-1594 [4] BOLT (3/8-16X1-IN)  
  1S-8572 [2] LOCK  
59. 3P-1654 [1] CAGE AS-BEARING  
60. 1S-9572 [1] BUSHING  
61. 3P-1624 [1] FLANGE AS  
62. 8M-6521 [4] DOWEL  
63. 8S-3426 [1] DOWEL  
64. 3B-1915 [10] BOLT (3/8-16X1.375-IN)  
  5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
65. 2P-5860 [12] BOLT (1/2-13X20.375-IN)  
  2M-0849 [12] WASHER-HARD (13.5X25.5X5-MM THK)  
66. 3P-1691 [1] HOUSING AS  
67. 2K-6921 [4] DOWEL  
68. 3F-3442 [1] DOWEL  
69. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
70. 6D-0692 C [1] SEAL-O-RING  
71. 6Y-5914 C [6] DISC-FRICTION  
72. 3P-0801 [6] PLATE-CLUTCH  
73. 3P-1697 [1] GEAR-RING (101-TEETH)  
74. 3P-0860 [20] INSERT  
75. 5F-6199 [10] BALL  
76. 1M-8651 [1] RING-RETAINING  
77. 7M-1199 [10] SPRING  
78. 7G-3453 C [4] GEAR-PLANETARY (28-TEETH)  
79. 3P-0894 [4] SHAFT AS-PLANETARY  
  3S-0036 [1] PLUG-CORE  
80. 216-1719 [1] GEAR AS-RING  
  6V-4431 [5] PLUG-CUP  
81. 2P-4511 [5] RING-SEAL  
82. 9M-6166 [1] RING-RETAINING  
83. 1M-3151 [5] DOWEL-REACTION  
84. 3P-0898 [1] BALL BEARING  
85. 5M-7878 [1] RING-SNAP  
86. 3P-7042 [1] HOUSING-CLUTCH  
87. 4M-9592 [40] SPRING  
88. 3P-7041 [1] GEAR-RING (81-TEETH)  
89. 1P-9216 [5] RING-SEAL  
90. 2P-4510 [5] PISTON-CLUTCH  
91. 1M-3150 [10] DOWEL-REACTION  
92. 7G-3456 C [3] GEAR-PLANETARY (31-TEETH)  
93. 7T-3143 C [6] DISC-THRUST  
94. 3S-8029 [3] RETAINER  
  0T-0102 [6] BOLT (3/8-16X0.625-IN)  
  2S-0607 [3] LOCKNUT  
95. 7F-8268 C [1] SEAL-O-RING  
96. 8T-7219 C [1] SEAL-FACE  
97. 4F-7952 C [1] SEAL-O-RING  
98. 9S-8006 [1] PLUG (7/8-14-THD)  
  2M-9780 [1] SEAL-O-RING  
99. 9S-8004 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150339
 

2P-5800: PLANETARY GP-TRANSMISSION

2P-5800 PLANETARY GP-TRANSMISSION
S/N 2DA1487-UP
PART OF 3P-0300 TRANSMISSION AR
i00122018 SEBP1715
2P5800 PLANETARY GP-TRANSMISSION Parts scheme 2P5800 PLANETARY GP-TRANSMISSION Parts scheme 2P5800 PLANETARY GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4426 [3] SHAFT AS-PLANETARY  
    (EACH INCLUDES)
  2A-3746 [1] PLUG-CUP  
2. 4M-3915 [6] BEARING-CAGED  
3. 2P-1098 [1] RETAINER  
4. 1K-6995 [2] RING-LOCK  
5. 6Y-0578 C [1] SHAFT AS  
6. 3P-1603 [1] TUBE  
7. 6V-1720 [1] PLATE-SERIAL NUMBER (TRANSMISSION)  
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
8. 3P-0896 [1] RING-RETAINING  
9. 2P-4522 [1] GEAR-SUN (33-TEETH)  
10. 5M-5018 [14] BEARING-ROLLER  
11. 2P-4429 [3] SHAFT AS-PLANETARY  
    (EACH INCLUDES)
  2A-3746 [1] PLUG-CUP  
12. 3S-2708 [10] PIN-SPRING  
13. 3P-0862 [1] CARRIER-INPUT  
14. 2P-4431 [1] GEAR-RING (84-TEETH)  
15. 8E-8304 [14] DISC-THRUST  
16. 7G-3455 [3] GEAR-PLANETARY (24-TEETH)  
17. 2P-4542 [1] SPACER  
18. 2K-5986 [10] PIN-SPRING  
19. 5M-2055 [16] BEARING-CAGED  
20. 7G-3454 [8] GEAR (17-TEETH)  
21. 4S-8670 [8] SHAFT-PLANETARY  
22. 8E-8297 [16] DISC-THRUST  
23. 2P-4523 [1] GEAR-SUN (47-TEETH)  
24. 2P-4433 [2] GEAR-RING (81-TEETH)  
25. 3P-1609 [1] CARRIER-PLANETARY  
26. 3P-0895 [1] BALL BEARING  
27. 030-8535 [8] BOLT-LOCKING (3/8-16X0.875-IN)  
28. 3P-0888 [1] CAGE-BEARING  
29. 9F-8477 [1] RING-METAL SEAL  
30. 6Y-0580 C [1] CARRIER-PLANETARY  
31. 5P-7602 [1] BALL BEARING  
32. 2P-1097 [1] RETAINER  
  8H-8830 [1] RING-RETAINING  
33. 3P-1600 [1] CAGE AS  
  4S-8537 [1] DOWEL  
34. 3P-1666 [1] GEAR-SUN (47-TEETH)  
35. 2P-5694 [1] CAGE-BEARING  
36. 2P-4435 [1] PLATE  
37. 3P-6880 [1] HOUSING AS-CLUTCH  
  5M-7937 [4] DOWEL  
38. 3P-2373 [1] HOUSING AS-CLUTCH  
  5M-7937 [4] DOWEL  
39. 2P-4363 [1] HOUSING-CLUTCH  
40. 9M-4355 [12] DAMPER-BOLT  
41. 6Y-2027 [15] DISC-FRICTION  
42. 8P-1656 [14] PLATE-CLUTCH  
43. 3P-1652 [1] HOUSING AS  
  5F-4250 [2] PIN  
  5H-8985 [10] PIN-SPRING  
44. 4M-1641 [4] DOWEL-REACTION  
45. 3P-1651 [1] PISTON AS  
  5H-8985 [10] PIN-SPRING  
46. 3P-1601 [4] PLUNGER  
47. 2B-2254 [4] SPRING  
48. 7T-9647 [1] PISTON-CLUTCH  
49. 3P-2692 [1] CAGE-BEARING  
50. 0T-0055 [30] BOLT (3/8-16X4.25-IN)  
  5M-2894 [30] WASHER-HARD (10.2X18.5X2.5-MM THK)  
51. 3P-1626 [1] HUB AS  
52. 3P-0817 [5] SPRING-DISC  
53. 3P-0814 [1] RING-SEAL  
54. 9S-4368 [1] RING-RETAINING  
55. 3P-0815 [1] SEAL-O-RING  
  3P-0800 [1] RING-SEAL  
56. 3P-2672 [1] BALL BEARING  
57. 9H-3452 [1] RING-RETAINING  
58. 1T-0414 C [6] BOLT-12 POINT HEAD (5/16-18X1-IN)  
  9M-1974 C [6] WASHER-HARD (8.8X16X2-MM THK)  
59. 6Y-0303 C [1] CAGE AS-BEARING  
60. 6Y-0306 C [1] BUSHING  
61. 6Y-0583 C [1] FLANGE AS  
62. 8S-3426 [1] DOWEL  
63. 1P-9252 C [1] RING-SEAL  
64. 3P-5955 [5] DISC-FRICTION  
65. 3B-1915 [10] BOLT (3/8-16X1.375-IN)  
  5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
66. 2P-5860 [12] BOLT (1/2-13X20.375-IN)  
  2M-0849 [12] WASHER-HARD (13.5X25.5X5-MM THK)  
67. 3P-1691 [1] HOUSING AS  
68. 2K-6921 [4] DOWEL  
69. 3F-3442 [1] DOWEL  
70. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
71. 6D-0692 [1] SEAL-O-RING  
72. 6Y-5914 [6] DISC-FRICTION  
73. 3P-0801 [6] PLATE-CLUTCH  
74. 6Y-0579 C [1] COUPLING  
75. 3P-0860 [20] INSERT  
76. 5F-6199 [10] BALL  
77. 1M-8651 [1] RING-RETAINING  
78. 7M-1199 [10] SPRING  
79. 7G-3453 [4] GEAR-PLANETARY (28-TEETH)  
80. 3P-0894 [4] SHAFT AS-PLANETARY  
    (EACH INCLUDES)
  3S-0036 [1] PLUG-CORE  
81. 216-1719 [1] GEAR AS-RING  
  6V-4431 [5] PLUG-CUP  
82. 2P-4511 [5] RING-SEAL  
83. 9M-6166 [1] RING-RETAINING  
84. 1M-3151 [5] DOWEL-REACTION  
85. 3P-0898 [1] BALL BEARING  
86. 5M-7878 [1] RING-SNAP  
87. 3P-7042 [1] HOUSING-CLUTCH  
88. 4M-9592 [40] SPRING  
89. 3P-7041 [1] GEAR-RING (81-TEETH)  
90. 1P-9216 [5] RING-SEAL  
91. 2P-4510 [5] PISTON-CLUTCH  
92. 1M-3150 [10] DOWEL-REACTION  
93. 7G-3456 [3] GEAR-PLANETARY (31-TEETH)  
94. 8E-8307 [6] DISC-THRUST  
95. 3S-8029 [3] RETAINER  
  0T-0102 [6] BOLT (3/8-16X0.625-IN)  
  2S-0607 [3] LOCKNUT  
96. 7F-8268 [1] SEAL-O-RING  
97. 4F-8946 [1] SEAL-O-RING  
98. 4F-7952 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Caterpillar Parts SIS Catalog 16G :

DIFFERENTIAL GP
8D-4300 DIFFERENTIAL GP
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
COVER GP-SHIPPING
3P-2770 COVER GP-SHIPPING
COOLER GP-TRANSMISSION OIL
4N-1559 COOLER GP-TRANSMISSION OIL
CONTROL GP-TRANSMISSION HYD
2P-5810 CONTROL GP-TRANSMISSION HYD
CONTROL GP-DIFFERENTIAL LOCK
8W-3055 CONTROL GP-DIFFERENTIAL LOCK
CHAIN GP-DRIVE
6G-1740 CHAIN GP-DRIVE
CASE GP-TRANSMISSION
2P-6899 CASE GP-TRANSMISSION
FILLER GP-POWER TRAIN OIL
8D-5820 FILLER GP-POWER TRAIN OIL
FILTER GP-OIL
6P-2091 FILTER GP-OIL
FILTER GP-OIL
6P-2091 FILTER GP-OIL
FILTER GP-OIL
6P-2091 FILTER GP-OIL
GEAR & CASE GP-TRANSFER
2P-6900 GEAR & CASE GP-TRANSFER
GEAR & CASE GP-TRANSFER
2P-6900 GEAR & CASE GP-TRANSFER
LINES GP-POWER TRAIN OIL
2P-9194 LINES GP-POWER TRAIN OIL
PLANETARY GP-TRANSMISSION
2P-5800 PLANETARY GP-TRANSMISSION

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.