AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G-5189 CYLINDER GP-RIPPER S/N 93U2679-UP 127.0 MM (5.0 IN) BORE X 495.3 MM (19.5 IN) STROKE (CHG 00-01) PART OF 8J-8970 RIPPER AR Type 2 AN ATTACHMENT 16G


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
LEVER GP

MOTOR GRADER 16G MOTOR GRADER 93U
 16G Motor Grader 93U02679-UP (MACHINE) POWERED BY 3406 Engine SEBP1715 16G 93U   (1973)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-LIFT
9T-3106 CYLINDER GP-LIFT
CYLINDER GP-RIPPER
3G-5189 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
3G-5189 CYLINDER GP-RIPPER
CYLINDER GP-SIDESHIFT
9T-3206 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
9T-3206 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
165-2506 CYLINDER GP-STEERING
 

#SEBP17150430
 

3G-5189: CYLINDER GP-RIPPER

3G-5189 CYLINDER GP-RIPPER
S/N 93U2679-UP
127.0 MM (5.0 IN) BORE X 495.3 MM (19.5 IN) STROKE (CHG 00-01)
PART OF 8J-8970 RIPPER AR
Type 2
AN ATTACHMENT
i00146658 SEBP1715
3G5189 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
    (INCLUDES RING & SEAL)
4. 3G-5188 [1] CYLINDER AS  
5. 4K-3128 [2] BUSHING  
6. 9T-6863 C [1] HEAD  
7. 167-2201 [1] SEAL AS-BUFFER  
    (INCLUDES BUFFER SEAL & BACKUP RING)
8. 167-2312 [1] SEAL-U-CUP  
9. 167-2463 [1] SEAL-WIPER  
10. 3G-1756 [1] ROD AS  
11. 2K-4507 [1] BUSHING  
12. 1D-4628 [4] BOLT (7/8-9X3.25-IN)  
  9H-1031 [4] WASHER-HARD (24X41.5X6-MM THK)  
13. 2K-4096 [1] RING-BACKUP  
14. 5F-3144 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER (50.95X82X12-MM THK)(50.95X82X12MM THK)  
16. 2J-0564 [1] LOCKNUT (2-12-THD)  
17. 8T-5668 C [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150431
 

9T-3206: CYLINDER GP-SIDESHIFT

9T-3206 CYLINDER GP-SIDESHIFT
S/N 93U2679-UP
101.6-MM (4-IN) BORE X 1531.9-MM (60.3-IN) STROKE
PART OF 8W-3257 CYLINDER & MTG GP-SIDESHIFT
Type 1
i00146992 SEBP1715
9T3206 CYLINDER GP-SIDESHIFT Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-3209 [1] CYLINDER AS  
2. 8T-0368 M [1] BOLT (M30X3.5X100-MM)  
3. 4K-0684 [1] WASHER-HARD (34X55X6-MM THK)  
4. 9T-3051 [1] PISTON  
5. 2H-3934 [1] SEAL-O-RING  
6. 2K-6830 C [1] RING-BACKUP  
7. 9T-3207 [1] ROD AS  
8. 1K-6982 C [1] SEAL-LIP TYPE  
9. 5J-0964 [1] SEAL-U-CUP  
10. 5J-3620 [1] SEAL-RING  
11. 8T-5668 [1] RING-WEAR  
12. 9T-3052 [1] HEAD  
13. 6J-2797 [1] RING-WEAR  
14. 5J-5402 [1] SEAL AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150432
 

9T-3206: CYLINDER GP-SIDESHIFT

9T-3206 CYLINDER GP-SIDESHIFT
S/N 93U2679-UP
101.6-MM (4-IN) BORE X 1531.9-MM (60.3-IN) STROKE
PART OF 8W-3257 CYLINDER & MTG GP-SIDESHIFT
Type 2
i00122879 SEBP1715
9T3206 CYLINDER GP-SIDESHIFT Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1047 C [1] ROD AS  
2. 9T-3051 [1] PISTON  
3. 172-9981 [1] HEAD  
4. 175-7882 [1] CYLINDER AS  
  9T-7045 ELBOW  
5. 167-2201 CJL [1] SEAL AS-BUFFER  
6. 167-2312 JL [1] SEAL-U-CUP  
7. 225-3281 CJL [1] SEAL-WIPER  
8. 173-9683 CM [1] BOLT (M30X3.5X90-MM)  
9. 175-7900 JL [1] SEAL-O-RING  
10. 2K-6830 JL [1] RING-BACKUP  
11. 5J-5402 JL [1] SEAL AS  
12. 6J-2797 JL [1] RING-WEAR  
13. 8T-0785 J [1] RING-WEAR  
14. 9X-8399 C [1] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  234-1949 J [1] KIT-SEAL (HYDRAULIC CYLINDER)(SIDESHIFT)  
    (INCLUDES SEALS & RINGS)
  242-2548 L [1] KIT-SEAL (SIDESHIFT)  
    (INCLUDES SEALS & RINGS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150433
 

165-2506: CYLINDER GP-STEERING

165-2506 CYLINDER GP-STEERING -RH
S/N 93U2679-UP
69.9-MM (2.8-IN) BORE X 314.0-MM (12.3-IN) STROKE
PART OF 8W-3260 CYLINDER & MTG GP-STEERING
i01523531 SEBP1715
1652506 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-5349 [1] HEAD  
2. 170-8528 [1] CYLINDER AS  
2A. 1N-5999 [1] PLUG-O-RING  
2B. 7J-0204 [1] SEAL-O-RING  
2C. 4D-0298 [1] BEARING  
3. 167-2191 J [1] SEAL AS-BUFFER  
4. 167-2300 J [1] SEAL-U-CUP  
5. 231-3539 J [1] SEAL-WIPER  
6. 170-5212 [1] ROD AS  
7. 173-9685 M [1] BOLT (M20X2.5X70-MM)  
8. 175-7895 J [1] SEAL-O-RING  
9. 1N-5999 [2] PLUG-O-RING  
10. 4J-9225 J [1] RING-BACKUP  
11. 4T-6907 J [1] RING-WEAR  
12. 5J-7010 J [1] SEAL AS  
13. 7J-0204 [2] SEAL-O-RING  
14. 8J-0112 J [1] RING-WEAR  
15. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
16. 9T-2849 [1] PISTON  
   
    AVAILABLE REPAIR KIT(S):
  185-7035 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150434
 

165-2507: CYLINDER GP-STEERING

165-2507 CYLINDER GP-STEERING -LH
S/N 93U2679-UP
63.5-MM (2.5-IN) BORE X 314.0-MM (12.3-IN) STROKE
PART OF 8W-3260 CYLINDER & MTG GP-STEERING
i01523537 SEBP1715
1652507 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-5349 [1] HEAD  
2. 170-4846 [1] CYLINDER AS  
2A. 1N-5999 [1] PLUG-O-RING  
2B. 7J-0204 [1] SEAL-O-RING  
2C. 4D-0298 [1] BEARING  
3. 167-2191 J [1] SEAL AS-BUFFER  
4. 167-2300 J [1] SEAL-U-CUP  
5. 170-5212 [1] ROD AS  
6. 173-9685 M [1] BOLT (M20X2.5X70-MM)  
7. 175-7895 J [1] SEAL-O-RING  
9. 231-3539 J [1] SEAL-WIPER  
10. 4J-9225 J [1] RING-BACKUP  
11. 4T-6907 J [1] RING-WEAR  
12. 5J-7010 J [1] SEAL AS  
14. 8J-0112 J [1] RING-WEAR  
15. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
16. 9T-2849 [1] PISTON  
   
    AVAILABLE REPAIR KIT(S):
  185-7035 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150435
 

9T-2853: CYLINDER GP-STEERING

9T-2853 CYLINDER GP-STEERING
S/N 93U2679-UP
69.85 MM BORE X 314.0 MM STROKE. RH
PART OF 8W-3260 CYLINDER & MTG GP-STEERING
i00122874 SEBP1715
9T2853 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2851 [1] CYLINDER AS (RH)  
  4D-0298 [1] BEARING  
2. 173-9685 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 5J-7010 [1] SEAL AS  
5. 8J-0112 [1] RING-WEAR  
6. 9T-2849 [1] PISTON  
7. 1N-5999 [1] PLUG-O-RING  
8. 7J-0204 [1] SEAL-O-RING  
9. 167-2300 [1] SEAL-U-CUP  
10. 9T-2848 [1] ROD AS  
11. 167-2452 [1] SEAL-WIPER  
12. 175-7895 [1] SEAL-O-RING  
13. 4J-9225 [1] RING-BACKUP  
14. 167-2191 [1] SEAL AS-BUFFER  
15. 151-5349 [1] HEAD  
16. 4T-6907 [1] RING-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150436
 

9T-2854: CYLINDER GP-STEERING

9T-2854 CYLINDER GP-STEERING
S/N 93U2679-UP
69.85 MM BORE X 314.0 MM STROKE. LH
PART OF 8W-3260 CYLINDER & MTG GP-STEERING
i00122875 SEBP1715
9T2854 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2852 [1] CYLINDER AS (LH)  
  4D-0298 [1] BEARING  
2. 173-9685 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 5J-7010 [1] SEAL AS  
5. 8J-0112 [1] RING-WEAR  
6. 9T-2849 [1] PISTON  
7. 1N-5999 [1] PLUG-O-RING  
8. 7J-0204 [1] SEAL-O-RING  
9. 167-2300 [1] SEAL-U-CUP  
10. 9T-2848 [1] ROD AS  
11. 167-2191 [1] SEAL AS-BUFFER  
12. 175-7895 [1] SEAL-O-RING  
13. 4J-9225 [1] RING-BACKUP  
14. 167-2452 [1] SEAL-WIPER  
15. 151-5349 [1] HEAD  
16. 4T-6907 [1] RING-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17150437
 

5T-1740: DRIVE GP-CIRCLE

5T-1740 DRIVE GP-CIRCLE
S/N 93U2679-2820
PART OF 8W-2931 BLADE AR
ALSO AN ATTACHMENT
i00147199 SEBP1715
5T1740 DRIVE GP-CIRCLE Parts scheme 5T1740 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8587 CY [1] MOTOR GP-GEROTOR  
2. 0S-1585 C [4] BOLT (1/2-13X1.5-IN)  
3. 5T-8060 C [1] ADAPTER  
4. 9D-1491 C [1] COUPLING  
5. 8D-4522 B [4] SHIM (0.127-MM THK)  
  8D-4523 B [2] SHIM (0.254-MM THK)  
6. 2D-8009 [1] SEAL-O-RING  
7. 4D-8186 [1] PLUG-PIPE  
8. 5T-8059 C [1] WORM-CIRCLE DRIVE  
9. 8D-3984 [2] CONE-BEARING  
10. 8D-3986 [2] CUP-BEARING  
11. 6G-5538 [1] COVER  
  6G-5539 [1] GASKET  
12. 2B-7410 [1] PLUG-PIPE  
13. 4H-6996 C [1] PIN-SPRING  
14. 2H-3931 C [1] SEAL-O-RING  
15. 5F-5434 [1] VALVE AS-VENT  
16. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 6G-1539 [1] COVER  
18. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
19. 5K-7143 [2] BOLT-SELF-LOCKING (1/2-13X1.5-IN)(SELF LOCKING)  
20. 5P-8245 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 9S-1322 [4] BOLT (7/8-9X6-IN)  
  5P-8249 [4] WASHER-HARD (24X41.5X4-MM THK)  
22. 5T-8058 C [1] HOUSING AS-DRIVE  
23. 4D-4823 [4] STUD-TAPERLOCK (5/8-11-THD)  
24. 3J-2333 [2] BUSHING  
25. 4D-7259 [4] STUD-TAPERLOCK (7/8-9-THD)  
26. 2D-6533 [1] SEAL-O-RING  
27. 6G-1538 [1] GEAR-WORM (36 TEETH)  
28. 6G-6122 [1] SPRING-DISC  
29. 8W-6179 [1] WASHER-THRUST  
30. 6G-1541 [1] SHAFT-DRIVE PINION  
31. 6G-1536 [1] SPACER (69.88X90X13-MM THK)  
32. 6G-5547 [1] PLATE  
  6G-5543 B [6] SHIM (0.13-MM THK)  
  6G-5544 B [9] SHIM (0.25-MM THK)  
33. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
  5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 5P-8249 C [4] WASHER-HARD (24X41.5X4-MM THK)  
35. 8W-4347 [1] PINION-CIRCLE DRIVE  
36. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
37. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 0S-1594 [4] BOLT (3/8-16X1-IN)  
39. 9D-0088 [1] COVER  
40. 1A-1415 [1] NUT (1-7/8-12-THD)  
  2G-0339 [1] WASHER-SPECIAL  
41. 8D-7424 [1] SPACER (48X81X6-MM THK)  
42. 8D-7333 [1] COLLAR  
43. 9D-0089 [1] CAGE AS  
44. 7J-2604 [1] BUSHING  
45. 8D-7341 [1] GASKET  
46. 5K-5288 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
47. 5K-5129 [2] RING-SEALING  
48. 8D-7343 [1] WASHER-THRUST (3.12X4.62X0.09-MM THK)  
49. 6K-0545 [4] LOCKNUT (7/8-9-THD)  
50. 2G-0475 [11] DISC  
51. 2G-0478 [10] PLATE-CLUTCH  
52. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
53. 1D-4720 [4] NUT (5/8-11-THD)  
  5P-8247 C [4] WASHER-HARD (17X32X3.5-MM THK)  
54. 2B-7410 [1] PLUG-PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150438
 

5T-1740: DRIVE GP-CIRCLE

5T-1740 DRIVE GP-CIRCLE
S/N 93U2821-UP
PART OF 8W-2931 BLADE AR
i00122145 SEBP1715
5T1740 DRIVE GP-CIRCLE Parts scheme 5T1740 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5977 CY [1] MOTOR GP-GEROTOR  
2. 5P-8245 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 5T-8060 [1] ADAPTER  
5. 2D-8009 [1] SEAL-O-RING  
6. 5K-7143 [2] BOLT-SELF-LOCKING (1/2-13X1.5-IN)  
7. 4D-8186 [1] PLUG-PIPE  
8. 5T-8059 [1] WORM-CIRCLE DRIVE  
9. 8D-3986 [2] CUP-BEARING  
10. 8D-3984 [2] CONE-BEARING  
11. 2B-7410 [2] PLUG-PIPE  
12. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
13. 8T-0336 [1] FITTING-PRESSURE RELIEF  
14. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
15. 4K-0367 [4] NUT-FULL (5/8-11-THD)  
16. 8W-6179 C [1] WASHER-THRUST  
17. 6G-5543 B [6] SHIM (0.13-MM THK)  
18. 6G-5544 B [9] SHIM (0.25-MM THK)  
19. 6G-5547 [1] PLATE  
20. 0S-1585 [11] BOLT (1/2-13X1.5-IN)  
21. 6G-5539 [1] GASKET  
22. 6G-5538 [1] COVER  
23. 6G-1536 [1] SPACER (69.88X90X13-MM THK)  
24. 6G-6122 [1] SPRING-DISC  
25. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
26. 6Y-7953 [11] DISC-FRICTION  
27. 2G-0478 [10] PLATE-CLUTCH  
28. 2D-6533 [1] SEAL-O-RING  
29. 9D-1491 [1] COUPLING  
30. 4H-6996 [1] PIN-SPRING  
31. 8X-4028 [1] GEAR-WORM (36-TEETH)  
32. 8D-4522 B [4] SHIM (0.127-MM THK)  
33. 8D-4523 B [2] SHIM (0.254-MM THK)  
34. 6K-0545 [4] LOCKNUT (7/8-9-THD)  
36. 5P-8249 [8] WASHER-HARD (24X41.5X4-MM THK)  
37. 8D-7343 [1] WASHER-THRUST (3.12X4.62X0.09-MM THK)  
38. 6G-1541 [1] SHAFT-DRIVE PINION  
39. 9D-0089 [1] CAGE AS  
39A. 7J-2604 [1] BUSHING  
40. 8D-7424 [1] SPACER (48X81X6-MM THK)  
41. 2G-0339 [1] WASHER-SPECIAL  
42. 1A-1415 [1] NUT (1-7/8-12-THD)  
43. 8D-7341 [1] GASKET  
44. 9D-0088 [1] COVER  
45. 0S-1594 [4] BOLT (3/8-16X1-IN)  
46. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
47. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
48. 8D-7333 [1] COLLAR  
49. 261-8555 C [1] PINION-CIRCLE DRIVE  
50. 5K-5288 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  5K-5129 [2] RING-SEALING  
51. 5T-8058 [1] HOUSING AS-DRIVE  
51A. 4D-4823 [4] STUD-TAPERLOCK (5/8-11-THD)  
51B. 3J-2333 [2] BUSHING  
51C. 4D-7259 [4] STUD-TAPERLOCK (7/8-9-THD)  
52. 9S-1322 [4] BOLT (7/8-9X6-IN)  
53. 6G-1539 [1] COVER  
54. 2H-3931 [1] SEAL-O-RING  
55. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17150439
 

9T-4917: LEVER GP

9T-4917 LEVER GP
S/N 93U2679-UP
PART OF 6E-3175, 9T-0110, 9T-0111, 9T-0442, 9T-1889, 9T-1890, 9T-5020, 9T-5879 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00145861 SEBP1715
9T4917 LEVER GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-4121 [1] HOUSING  
2. 4T-5795 [2] BEARING  
3. 4T-5945 [1] RING  
4. 9T-4685 B [3] SHIM (0.12-MM THK)  
5. 9T-4697 [1] BOOT  
6. 9T-4916 [1] LEVER  
7. 8T-0269 M [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
8. 9T-4683 [1] COVER  
9. 9T-4684 [1] HOUSING  
10. 6V-5391 [1] SEAL-O-RING  
11. 3S-9233 [1] SEAL-O-RING  
12. 5P-5874 [1] SEAL-O-RING  
13. 9H-6761 [1] SEAL-O-RING  
14. 8T-0334 [2] WASHER-HARD (6.6X12.5X1.6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 16G :

CYLINDER GP-RIPPER
3G-5189 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
9T-3106 CYLINDER GP-LIFT
CYLINDER GP-LIFT
9T-3106 CYLINDER GP-LIFT
CYLINDER GP-HYDRAULIC
121-9244 CYLINDER GP-HYDRAULIC
CYLINDER GP-CENTERSHIFT
9T-3312 CYLINDER GP-CENTERSHIFT
CYLINDER GP-CENTERSHIFT
9T-3312 CYLINDER GP-CENTERSHIFT
CYLINDER GP-BLADE TIP
9T-8944 CYLINDER GP-BLADE TIP
CYLINDER GP-BLADE TIP
9T-3198 CYLINDER GP-BLADE TIP
CYLINDER GP-SIDESHIFT
9T-3206 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
9T-3206 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
165-2506 CYLINDER GP-STEERING
CYLINDER GP-STEERING
165-2507 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2853 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2854 CYLINDER GP-STEERING
DRIVE GP-CIRCLE
5T-1740 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
5T-1740 DRIVE GP-CIRCLE

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.