WORK TOOLS
BLADE GPIMPLEMENTS
LINK GPWORK TOOLS
RIPPER GPGROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOLCAPS AND PLUGS
GASKET & SEAL KITS
WORK TOOLS
BLADE GP
#SEBP17150660
8D-4885: LIFT GP-BLADE
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-3479 | [2] | LOCK | |
| 2. | 5B-5473 C | [6] | BOLT (1-8X6.5-IN) | |
| 5P-8250 C | [12] | WASHER (28X49X5-MM THK) | ||
| 3. | 8W-5956 C | [1] | ARM AS | |
| 4. | 8D-3311 | [1] | BUSHING | |
| 5. | 8D-3309 | [1] | BUSHING | |
| 6. | 9D-6588 | [8] | SEAL-LIP TYPE | |
| 7. | 9D-6589 | [1] | SEAL-LIP TYPE | |
| 8. | 9D-0501 | [1] | BAR AS | |
| 9. | 8D-9507 | [4] | BUSHING | |
| 10. | 6G-3533 | [1] | STUD-BALL | |
| 8K-9207 | [1] | PLATE | ||
| 11. | 9D-3313 | [2] | BUSHING | |
| 9D-3527 | [1] | SPACER | ||
| 12. | 9D-3333 | [1] | RING-RETAINING | |
| 13. | 8D-3328 | [2] | LOCK | |
| 14. | 2B-1015 C | [4] | BOLT (3/4-10X6.5-IN) | |
| 15. | 8W-5957 C | [1] | ARM AS | |
| 16. | 8D-3311 | [1] | BUSHING | |
| 17. | 8D-3309 | [1] | BUSHING | |
| 18. | 5P-8248 C | [12] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 19. | 8D-3263 B | [8] | SHIM (0.13-MM THK) | |
| 8D-3264 B | [6] | SHIM (0.26-MM THK) | ||
| 8D-3265 B | [2] | SHIM (0.51-MM THK) | ||
| 20. | 8D-3271 | [2] | RETAINER | |
| 21. | 8D-3308 | [2] | SEAL (PLASTIC) | |
| 5H-5672 | [2] | SEAL-O-RING | ||
| 22. | 8D-3268 | [2] | WASHER (93.68X133.35X2.39-MM THK) | |
| 8D-3269 | [4] | WASHER (3.635X5.25X0.075-IN THK) | ||
| 23. | 8D-3266 | [2] | WASHER (109X149X2.39-MM THK) | |
| 8D-3267 | [4] | WASHER (4.265X5.84X0.075-IN THK) | ||
| 24. | 8D-3307 | [2] | SEAL (PLASTIC) | |
| 2S-8439 | [2] | SEAL-O-RING | ||
| 25. | 2G-8237 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 26. | 2G-8234 | [1] | RING | |
| 27. | 8D-3245 | [8] | WASHER (3.515X7X0.075-IN THK) | |
| 8D-3244 | [4] | WASHER (90.47X177.8X2.39-MM THK) | ||
| 28. | 8D-3329 | [2] | PIN | |
| 29. | 8D-3247 | [4] | WASHER (71.42X152.4X2.39-MM THK) | |
| 8D-3251 B | [10] | WASHER (70X151X1.22-MM THK) | ||
| 8D-3252 B | [10] | WASHER (70X151X0.76-MM THK) | ||
| 30. | 8D-3246 | [2] | PIN | |
| 31. | 2G-3983 | [1] | PLATE | |
| 32. | 9S-1366 | [1] | BOLT (1/2-13X2.5-IN) | |
| 2M-0849 | [1] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 33. | 2A-1538 | [4] | BOLT (3/4-10X2.25-IN) | |
| 34. | 2J-3507 C | [6] | NUT-FULL (1-8-THD) | |
| 35. | 2J-3506 C | [4] | NUT-FULL (3/4-10-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17150661
6Y-8493: LINK GP-RIPPER
6Y-8493 LINK GP-RIPPER
S/N 93U2679-UP
PART OF 8J-5333 MOUNTING GP-RIPPER
AN ATTACHMENT
S/N 93U2679-UP
PART OF 8J-5333 MOUNTING GP-RIPPER
AN ATTACHMENT
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS#SEBP17150662
8J-5333: MOUNTING GP-RIPPER
8J-5333 MOUNTING GP-RIPPER
S/N 93U2679-UP
PART OF 8J-8970 RIPPER AR
Type 1
AN ATTACHMENT
S/N 93U2679-UP
PART OF 8J-8970 RIPPER AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4639 | [6] | BOLT (1-8X4-IN) | |
| 2. | 5P-8250 C | [12] | WASHER (28X49X5-MM THK) | |
| 3. | 8B-9840 | [12] | SPACER (1.125X2X1-IN THK) | |
| 4. | 1D-4593 | [2] | BOLT (5/8-11X5.5-IN) | |
| 5. | 3K-2889 | [4] | LOCKNUT (5/8-11-THD) | |
| 6. | 8J-9608 | [2] | PIN | |
| 7. | 1D-4637 C | [6] | BOLT (1-8X3.25-IN) | |
| 8. | 1D-4574 | [2] | BOLT (1/2-13X6-IN) | |
| 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | ||
| 9. | 6K-0715 | [2] | PIN | |
| 10. | 8J-5331 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 1J-2315 | [1] | BOSS | ||
| 2K-4615 | [1] | BOSS | ||
| 11. | 8J-9056 | [2] | SCREW-ADJUSTMENT | |
| 12. | 8J-9092 | [2] | PIN | |
| 13. | 1D-4595 | [2] | BOLT (5/8-11X6-IN) | |
| 14. | 8J-5332 | [1] | PLATE AS | |
| 15. | 2K-4315 C | [4] | BOSS | |
| 16. | 1J-2315 C | [4] | BOSS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP17150663
8J-5333: MOUNTING GP-RIPPER
8J-5333 MOUNTING GP-RIPPER
S/N 93U2679-UP
PART OF 8J-8970 RIPPER AR
Type 2
AN ATTACHMENT
S/N 93U2679-UP
PART OF 8J-8970 RIPPER AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-0410 | [6] | BOLT (1-8X4-IN) | |
| 2. | 8T-5361 | [12] | WASHER-HARD (28X49X5-MM THK) | |
| 3. | 8B-9840 | [12] | SPACER (1.125X2X1-IN THK) | |
| 4. | 7X-0358 | [2] | BOLT (5/8-11X5.5-IN) | |
| 5. | 3K-2889 | [4] | LOCKNUT (5/8-11-THD) | |
| 6. | 8J-9608 | [2] | PIN | |
| 7. | 7X-0407 | [6] | BOLT (1-8X3.25-IN) | |
| 8. | 7X-0338 | [2] | BOLT (1/2-13X6-IN) | |
| 9. | 6K-0715 | [2] | PIN | |
| 10. | 6Y-8493 YC | [2] | LINK GP-RIPPER | |
| 11. | 1K-6872 | [2] | LOCKNUT (1/2-13-THD) | |
| 12. | 8J-9092 | [2] | PIN | |
| 13. | 7X-0359 | [2] | BOLT (5/8-11X6-IN) | |
| 14. | 8J-5332 | [1] | PLATE AS | |
| 15. | 2K-4315 | [4] | BOSS | |
| 16. | 1J-2315 | [4] | BOSS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17150664
8J-8970: RIPPER AR
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS#SEBP17150665
8J-5274: RIPPER GP
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0703 | [1] | BAR | |
| 2. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 3K-8510 | [1] | PIN | |
| 4. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 5. | 8J-2189 Y | [3] | TOOTH GP-RIPPER | |
| 6. | 8J-5050 | [1] | CARRIAGE AS | |
| 6A. | 2K-4315 | [4] | BOSS | |
| 6B. | 2K-4309 | [1] | REINFORCEMENT (RH) | |
| 6C. | 2K-4310 | [1] | REINFORCEMENT (LH) | |
| 6D. | 5K-7748 | [7] | HOLDER-BIT | |
| 7. | 9J-2880 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 7A. | 3G-2582 C | [2] | BEARING | |
| 8. | 9J-2881 | [1] | LINK AS-LOWER | |
| 8A. | 3G-2580 C | [4] | BEARING | |
| 9. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE) | |
| 10. | 1K-6872 C | [8] | LOCKNUT (1/2-13-THD) | |
| 11. | 3K-2889 | [4] | LOCKNUT (5/8-11-THD) | |
| 12. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 13. | 7X-0325 C | [7] | BOLT (1/2-13X2.5-IN) | |
| 14. | 7X-0358 | [2] | BOLT (5/8-11X5.5-IN) | |
| 15. | 7X-0362 | [2] | BOLT (5/8-11X7-IN) | |
| 16. | 8J-9607 | [2] | PIN | |
| 17. | 8J-9608 | [2] | PIN | |
| 18. | 9D-6584 C | [8] | SEAL-LIP TYPE | |
| 19. | 9D-6585 C | [8] | SEAL-LIP TYPE | |
| 20. | 8T-9389 | [1] | BOLT (1/2-13X2.75-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP17150666
8J-2189: TOOTH GP-RIPPER
For full view, you need register
#SEBP17150667
9D-2700: BOX GP-TOOL
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-0791 C | [1] | BOX AS-TOOL | |
| 2. | 4L-6454 C | [4] | BOLT (3/8-16X1-IN) | |
| 3. | 1D-4717 | [2] | NUT (3/8-16-THD) | |
| 4. | 5P-1075 | [10] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 5. | 5M-3062 CJ | [4] | BOLT (3/8-16X0.75-IN) | |
| 6. | 5P-8502 C | [1] | PADLOCK GP | |
| 6V-5874 AC | [1] | COVER | ||
| 5P-8500 AC | [2] | KEY | ||
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | REQUIRED ONLY ON 16G MOTOR GRADER | |||
#SEBP17150668
9G-9288: CAP GP-PROTECTION
For full view, you need register
#SEBP17150669
128-2922: KIT-GASKET
128-2922 KIT-GASKET
S/N 93U2679-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FOR USE WITH E573- ENGINE S/N 7CZ1-UP, E571- ENGINE S/N 1MM117-UP, E572- ENGINE S/N 6NZ1-UP, 9NZ1-UP, E399- ENGINE S/N 5EK1-UP, 6TS1-UP, T276- MACHINE S/N 58X1-UP
FIELD INSTALLATION
S/N 93U2679-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FOR USE WITH E573- ENGINE S/N 7CZ1-UP, E571- ENGINE S/N 1MM117-UP, E572- ENGINE S/N 6NZ1-UP, 9NZ1-UP, E399- ENGINE S/N 5EK1-UP, 6TS1-UP, T276- MACHINE S/N 58X1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 16G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1L-8212 | [1] | GASKET | ||
| 2N-0931 | [1] | GASKET | ||
| 383-3683 ABJ | [1] | GASKET | ||
| 4N-0699 | [1] | GASKET | ||
| 4N-0933 | [1] | GASKET | ||
| 7C-0307 | [3] | GASKET (REGULATOR HOUSING, OUTLET) | ||
| 104-8585 | [1] | GASKET-REGULATOR | ||
| 390-0941 ABJ | [1] | GASKET-REGULATOR | ||
| 139-3550 | [1] | GASKET-REGULATOR (HOUSING) | ||
| 4N-1156 | [1] | GASKET-REGULATOR COVER | ||
| 4W-4014 | [1] | GASKET-REGULATOR HOUSING | ||
| 9Y-2588 | [1] | GASKET-REGULATOR HOUSING | ||
| 125-0434 | [1] | SEAL-INTEGRAL (WATER TEMPERATURE REGULATOR) | ||
| 9M-3786 | [1] | SEAL-O-RING | ||
| 109-0076 | [1] | SEAL-O-RING | ||
| 109-0077 | [3] | SEAL-O-RING | ||
| 156-5198 | [1] | SEAL-O-RING | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | CLASSIC OPTIONAL SERVICE REPLACEMENT | |||
