8N-9751 CHANGEOVER GP S/N 4HD1-99999 PROVIDES HEAT TO FUEL BEFORE ENTERING FUEL FILTER FIELD INSTALLATION 120G

Pos.	Part No	Qty	Parts name
1.	8N-9707	[1]	REGULATOR-FUEL TEMPERATURE
	2M-9780	[1]	SEAL-O-RING
2.	1D-4539	[1]	BOLT (5/16-18X2.5-IN)
	1B-2714	[1]	BOLT (1/4-20X2.5-IN)
3.	8N-9584	[1]	ADAPTER
4.	1P-0436	[2]	GASKET
5.	8N-2100	[1]	CONNECTOR
6.	8N-9455	[1]	HEATER AS-FUEL
7.	5M-6214	[1]	PLUG-PIPE
8.	8N-2301	[1]	SEAL
9.	8N-9747	[1]	BASE AS-FUEL FILTER
	8N-9800	[1]	INSERT-FUEL FILTER
10.	4N-3296	[1]	SPRING
11.	4N-3297	[1]	DISC-RELIEF VALVE
12.	4N-3298	[1]	SEAT-RELIEF VALVE

#SEBP17170101

8W-2023: CONTROL GP-GOVERNOR

CONTROL GP-GOVERNOR

8W-2023 CONTROL GP-GOVERNOR
S/N 4HD1-1267
PART OF 5Y-0449 CHASSIS AR

i00144523 SEBP1717

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	8C-0617	[1]	BOLT (1/4-20X1.375-IN)
	9S-8750	[1]	NUT-FULL (1/4-20-THD)
2.	1D-4717	[1]	NUT (3/8-16-THD)
3.	1S-5927	[1]	LEVER-GOVERNOR CONTROL
4.	1B-0676	[2]	PIN
	3B-4615	[2]	PIN-COTTER
5.	2K-0400	[1]	END-YOKE ROD
6.	1B-4203	[2]	NUT-FULL (3/8-24-THD)
7.	4L-6454	[12]	BOLT (3/8-16X1-IN)
8.	5T-5334	[1]	COVER AS
	9F-2978	[3]	NUT-WELD (3/8-16-THD)
9.	8D-9974	[2]	GASKET
10.	1F-5403	[1]	ROD END-ADJUSTABLE
11.	5H-0745	[1]	LEVER-GOVERNOR CONTROL
	4L-9337	[1]	BOLT (3/8-16X1.5-IN)
12.	1B-8704	[3]	KEY-WOODRUFF
13.	8T-9043	[2]	BOLT (5/16-18X0.875-IN)
	3F-9556	[2]	LOCKWASHER
14.	9D-0194	[1]	LEVER
15.	9B-7237	[2]	BOLT (3/8-16X1.25-IN)
16.	5T-3476	[1]	SHAFT
17.	4J-2667	[2]	BEARING AS-NEEDLE (1.27CM LG)
	7K-2135	[2]	BEARING-ROLLER (1.43CM LG)
18.	7H-3641	[2]	END-ROD (5/16-24-THD)
	1B-4202	[2]	NUT (5/16-24-THD)
19.	8D-9973	[2]	HOUSING
20.	9D-1611	[1]	CABLE
21.	8T-5390	[3]	BOLT (3/8-16X3.5-IN)
22.	8D-5119	[1]	SHAFT
23.	9D-0145	[1]	LEVER
24.	8D-9969	[1]	COVER
25.	5P-1075	[15]	WASHER-HARD (10.2X22.5X3-MM THK)
26.	2Y-6674	[1]	ROD
27.	4L-6459	[3]	BOLT (3/8-16X2.5-IN)
28.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
29.	1D-4717	[3]	NUT (3/8-16-THD)
30.	8D-5126	[1]	SHAFT
31.	4D-2498	[1]	LEVER
32.	1B-8704	[3]	KEY-WOODRUFF
33.	4M-0495	[1]	ROD END
34.	1B-2578	[5]	NUT (3/8-16-THD)
35.	5S-7382	[2]	BOLT (3/8-16X1.375-IN)
36.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
37.	5S-7379	[2]	BOLT (3/8-16X0.875-IN)
38.	8D-6174	[1]	BRACKET AS
39.	7H-1051	[1]	BUSHING-TERMINAL
40.	0V-0196	[2]	BOLT (3/8-16X1.25-IN)
41.	1B-4202	[4]	NUT (5/16-24-THD)
42.	3D-9609	[1]	ROD END
43.	1A-2457	[1]	PIN-CLEVIS
	3B-4607	[1]	PIN-COTTER
44.	8D-5996	[1]	LEVER
45.	5B-2551	[1]	DISC-FRICTION
46.	6G-3505	[1]	HANDLE AS
	4F-8686	[1]	BUSHING
47.	4J-6580	[1]	WASHER
48.	0L-0821	[1]	SEAT-SPRING
	5D-0998	[6]	SPRING-DISC
49.	2K-0564	[1]	LOCKNUT (1/2-20-THD)
	5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
50.	7H-3641	[3]	END-ROD (5/16-24-THD)
51.	9B-7237	[1]	BOLT (3/8-16X1.25-IN)
52.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
53.	8W-0317	[1]	LEVER
54.	0L-0829	[1]	HANDLE
55.	4V-0627	[1]	ROD
56.	8W-3589	[1]	LINK AS-SPRING
57.	4H-2186	[1]	TREADLE AS
	2M-6835	[1]	PIPE
58.	1F-7958	[3]	NUT-FULL (1/2-13-THD)
59.	6G-0255	[1]	TREADLE AS
60.	6V-5782	[3]	BOLT (5/16-18X1.125-IN)
	4M-5280	[3]	NUT-PLATED FULL (5/16-18-THD)
	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
61.	8T-9375	[1]	BOLT (3/8-16X1.75-IN)
62.	4H-9304	[1]	STUD-TAPERLOCK
63.	8T-1760	[1]	CLIP
64.	2K-4973	[1]	LOCKNUT (3/8-16-THD)
65.	8W-0328	[1]	CYLINDER-DAMPER

#SEBP17170102

8W-2023: CONTROL GP-GOVERNOR

CONTROL GP-GOVERNOR

8W-2023 CONTROL GP-GOVERNOR
S/N 4HD1268-99999
PART OF 5Y-0449, 8W-1953 CHASSIS AR

i00144524 SEBP1717

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	8C-0617	[1]	BOLT (1/4-20X1.375-IN)
	9S-8750	[1]	NUT-FULL (1/4-20-THD)
2.	6V-8801 C	[2]	NUT (3/8-16-THD)
3.	1S-5927	[1]	LEVER-GOVERNOR CONTROL
4.	1B-0676 C	[1]	PIN
	3B-4615 C	[1]	PIN-COTTER
5.	4D-4064 C	[1]	ROD END (3/8-24-THD)
6.	1B-4203	[2]	NUT-FULL (3/8-24-THD)
7.	4L-6454	[12]	BOLT (3/8-16X1-IN)
8.	5T-5334	[1]	COVER AS
	9F-2978	[3]	NUT-WELD (3/8-16-THD)
9.	8D-9974	[2]	GASKET
10.	1F-5403	[1]	ROD END-ADJUSTABLE
11.	5H-0745	[1]	LEVER-GOVERNOR CONTROL
	4L-9337	[1]	BOLT (3/8-16X1.5-IN)
12.	1B-8704	[3]	KEY-WOODRUFF
13.	8T-9043	[2]	BOLT (5/16-18X0.875-IN)
	3F-9556	[2]	LOCKWASHER
14.	9D-0194	[1]	LEVER
15.	9B-7237	[2]	BOLT (3/8-16X1.25-IN)
16.	5T-3476	[1]	SHAFT
17.	4J-2667	[2]	BEARING AS-NEEDLE (1.27CM .5IN. LG.)
	7K-2135	[2]	BEARING-ROLLER (1.43CM .562IN. LG.)
18.	7H-3641	[2]	END-ROD (5/16-24-THD)
	1B-4202	[2]	NUT (5/16-24-THD)
19.	8D-9973	[2]	HOUSING
20.	9D-1611	[1]	CABLE
21.	8T-5390	[3]	BOLT (3/8-16X3.5-IN)
22.	8D-5119	[1]	SHAFT
23.	9D-0145	[1]	LEVER
24.	8D-9969	[1]	COVER
25.	5P-1075	[15]	WASHER-HARD (10.2X22.5X3-MM THK)
26.	2Y-6674	[1]	ROD
27.	4L-6459	[3]	BOLT (3/8-16X2.5-IN)
28.	5S-7382 C	[1]	BOLT (3/8-16X1.375-IN)
	8T-4896 C	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
30.	6V-8801 C	[3]	NUT (3/8-16-THD)
31.	8D-5126	[1]	SHAFT
32.	4D-2498	[1]	LEVER
33.	1B-8704	[3]	KEY-WOODRUFF
34.	4M-0495	[1]	ROD END
35.	1B-2578	[5]	NUT (3/8-16-THD)
36.	5S-7382	[2]	BOLT (3/8-16X1.375-IN)
37.	8T-4896 C	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
38.	5S-7379	[2]	BOLT (3/8-16X0.875-IN)
39.	8D-6174	[1]	BRACKET AS
40.	7H-1051	[1]	BUSHING-TERMINAL
41.	9B-7237 C	[1]	BOLT (3/8-16X1.25-IN)
42.	1B-4202	[4]	NUT (5/16-24-THD)
43.	3D-9609	[1]	ROD END
44.	1A-2457	[1]	PIN-CLEVIS
	3B-4607	[1]	PIN-COTTER
45.	8D-5996	[1]	LEVER
46.	6Y-7966	[1]	DISC-FRICTION
47.	6G-3505	[1]	HANDLE AS
	4F-8686	[1]	BUSHING
48.	3S-1349 C	[1]	WASHER-HARD (31X52.5X6-MM THK)
49.	0L-0821	[1]	SEAT-SPRING
	5D-0998	[6]	SPRING-DISC
50.	009-3161 C	[1]	NUT
	5P-1076	[1]	WASHER-HARD (13.5X30X4-MM THK)
51.	7H-3641	[3]	END-ROD (5/16-24-THD)
52.	2N-2766 C	[1]	LOCKNUT (3/8-16-THD)
53.	8W-0328	[1]	CYLINDER-DAMPER
54.	8W-0317	[1]	LEVER
55.	0L-0829	[1]	HANDLE
56.	4V-0627	[1]	ROD
57.	8W-3589	[1]	LINK AS-SPRING
58.	4H-2186	[1]	TREADLE AS
	2M-6835	[1]	PIPE
59.	1F-7958	[3]	NUT-FULL (1/2-13-THD)
60.	8X-6935	[1]	TREADLE AS
61.	6V-5782	[3]	BOLT (5/16-18X1.125-IN)
	4M-5280	[3]	NUT-PLATED FULL (5/16-18-THD)
	8T-4224	[3]	WASHER-HARD (8.8X16X2-MM THK)
62.	8T-9375	[1]	BOLT (3/8-16X1.75-IN)
63.	4H-9304	[1]	STUD-TAPERLOCK
64.	8T-1760	[1]	CLIP
65.	8X-2092	[2]	NUT
66.	0V-0196	[2]	BOLT (3/8-16X1.25-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP17170103

2W-3286: FILTER GP-FUEL

FILTER GP-FUEL

2W-3286 FILTER GP-FUEL
S/N 9CB1-99999
PART OF 2Y-8621, 2Y-9496, 5Y-1831 ENGINE AR
ALSO AN ATTACHMENT

i00144129 SEBP1717

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	2W-7230	[1]	TUBE AS
2.	8M-5857	[2]	CLAMP
3.	139-0501	[1]	ELBOW
4.	7N-9520	[1]	GASKET
5.	7N-9519	[1]	BASE AS-FUEL FILTER
6.	6B-4198	[2]	BOLT (1/4-20X4.19-IN)
7.	1R-0750	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
8.	5M-6214	[1]	PLUG-PIPE
9.	5P-4289	[1]	ELBOW
10.	3J-1907	[2]	SEAL-O-RING
11.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
12.	0S-1617	[1]	BOLT (5/16-18X0.75-IN)
13.	5S-0003	[1]	NUT (5/16-18-THD)
14.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)

#SEBP17170104

7W-7831: FILTER GP-PRIMARY FUEL

FILTER GP-PRIMARY FUEL

7W-7831 FILTER GP-PRIMARY FUEL
S/N 4HD1-99999
PART OF 8N-3569 PUMP GP-FUEL TRANSFER

i01182164 SEBP1717

7W7831 FILTER GP-PRIMARY FUEL Parts scheme

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	7N-1628	[1]	NUT (3/8-24-THD)
2.	2J-0157	[1]	SEAL-O-RING
3.	1L-3769	[1]	RING-RETAINING
4.	7W-7824	[1]	BASE-FUEL FILTER
5.	8H-2778	[1]	SEAL-RING
6.	7W-8910	[1]	FILTER ELEMENT-FUEL
7.	8H-2810	[1]	CASE AS-FILTER
8.	2H-3429	[1]	RING-RETAINING
9.	7H-9678	[1]	RETAINER-ELEMENT
10.	7S-9323	[1]	SPRING

#SEBP17170105

7W-1489: GOVERNOR GP

GOVERNOR GP

7W-1489 GOVERNOR GP
S/N 9CB1-99999
PART OF 2W-0517, 4P-4248 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT

i00431694 SEBP1717

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	6D-3897	[1]	BOLT (8-32X0.5-IN)
2.	6L-5897	[2]	BOLT (1/4-20X0.875-IN)
3.	2W-6104	[1]	BLOCK AS-STOP
	2W-6103	[1]	DOWEL
4.	1W-4243	[1]	SPRING-BUMPER
5.	8N-2488	[1]	BOLT-LOAD STOP
6.	8N-3256	[1]	COLLAR-LOAD STOP
7.	8L-5832 C	[1]	NUT-HEX (10-32-THD)
8.	5H-6552	[1]	SETSCREW-SOCKET (10-32X1.25-IN)
			-OR-
	9Y-4701 C	[1]	SETSCREW-SOCKET (10-32X1.38-IN)
9.	1W-6523	[1]	PLUG
10.	8N-3259	[1]	COVER-HIGH IDLE
	6I-2003	[1]	GASKET
11.	7N-2594	[1]	SETSCREW-SLOTTED
	7N-8775	[1]	NUT-HIGH IDLE
12.	5P-6945	[2]	BOLT (1/4-20X1.125-IN)
	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
13.	3J-7354	[1]	SEAL-O-RING
14.	4N-5485	[1]	BODY-VALVE
	5F-9144	[1]	SEAL-O-RING
15.	4N-5484	[1]	VALVE-NEEDLE
	6H-9691	[1]	SEAL-O-RING
16.	0S-1616	[6]	BOLT (1/4-20X1-IN)
17.	7N-8780	[1]	COVER AS-CONTROL
18.	5P-3272	[1]	SEAL-LIP TYPE
19.	150-3728	[1]	GASKET
20.	3P-0009	[1]	INSULATOR
21.	1P-2497	[2]	BOLT-HEAD
	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
22.	8N-3258	[1]	COVER-LOAD STOP
	6I-2004	[1]	GASKET
23.	2N-0828	[2]	WASHER
24.	1N-3800	[1]	SLEEVE-RACK CONTROL
25.	6N-3504	[1]	SEAT-GOVERNOR SPRING
26.	2W-2216	[1]	SPRING-LINK
27.	2M-7819	[2]	RING-RETAINING
28.	1N-3802	[1]	SEAT-SPRING
29.	8N-2507	[1]	PISTON AS-SERVO
	8N-2505	[1]	VALVE-GOVERNOR SERVO
	7C-0791 C	[1]	CYLINDER AS
	7N-7271 C	[1]	LEVER-CONTROL
	3G-3835 C	[1]	PIN
30.	1W-4098 C	[1]	PISTON-GOVERNOR SERVO
31.	7W-0250 C	[1]	SLEEVE
32.	5P-9757	[1]	SEAL-O-RING
33.	031-0216	[3]	BOLT (1/4-20X0.75-IN)
34.	4N-2953	[1]	RING-LOCK
35.	7E-4892	[1]	RACE-THRUST BEARING
36.	7M-7219	[1]	BEARING-THRUST
37.	4W-6868	[1]	RISER-GOVERNOR
38.	2P-9556	[1]	WASHER (1.17X1.5X0.06-IN THK)
39.	8N-2495	[1]	HOUSING AS-GOVERNOR
	8S-6814	[4]	PIN (12.7MM .5IN LG)
	4F-6024	[2]	PIN (8MM .315IN LG)
40.	8N-2503	[1]	ACTUATOR AS-GOVERNOR
	4N-6407	[1]	SPOOL-DASHPOT
	4N-6406	[1]	RING-SPACER
41.	4N-6404	[1]	RING-RETAINING
42.	7N-8785	[1]	SHAFT-PIVOT
43.	150-3730	[1]	GASKET
44.	7N-7270	[2]	SLEEVE-SPRING
45.	7N-8821	[3]	RING-RETAINING
46.	3K-5733	[1]	SPRING
47.	8N-2501	[1]	HOUSING AS-GOVERNOR
	7E-5346	[1]	VALVE AS
48.	8N-2499	[1]	SPRING-GUIDE
49.	3D-8317	[1]	RING-RETAINING
50.	4N-0260	[1]	SEAL-LIP TYPE
51.	2F-2290	[1]	PLUG-CORE
52.	8N-3945	[1]	BUSHING-TERMINAL
53.	4N-0432	[1]	BALL BEARING
54.	2W-9996	[1]	SCREW-IDLE STOP (1/4-20X1.25-IN)
	7W-4272	[1]	NUT-SEALING (5/16-18-THD)
55.	2W-7400	[1]	SPRING
56.	6V-8137	[2]	SCREW-BUTTON HEAD (10-24X1-IN)
57.	7W-2000 C	[1]	STOP-DETENT
58.	2W-9305	[1]	PLATE-THROTTLE
59.	2W-6102	[1]	LEVER-SPRING SEAT
60.	8N-3168	[1]	LEVER-THROTTLE
61.	7W-1321	[1]	PLATE-THROTTLE
62.	7W-1318	[1]	PLATE-RETAINING
	C		CHANGE FROM PREVIOUS TYPE

#SEBP17170106

5T-5030: LINES GP-FUEL

LINES GP-FUEL

5T-5030 LINES GP-FUEL
S/N 4HD1-99999
PART OF 5Y-0449, 8W-1953 CHASSIS AR

i00144220 SEBP1717

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	6B-5072	[1]	BUSHING-REDUCING
2.	6K-1972	[1]	ELBOW-FLARED
3.	2G-4706 I	[1]	HOSE AS
4.	3S-2093 C	[1]	STRAP-CABLE
5.	7D-5363 C	[1]	CONNECTOR
6.	9B-7237 C	[2]	BOLT (3/8-16X1.25-IN)
7.	5K-5338 C	[2]	CLIP
	5S-7379 C	[2]	BOLT (3/8-16X0.875-IN)
8.	2S-5100	[1]	VALVE-MANUAL
9.	8N-7140 CI	[1]	HOSE AS
10.	005-4362 C	[1]	ELBOW
	3K-0360	[1]	SEAL-O-RING
11.	8T-4896 C	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
12.	5P-4620 C	[1]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP17170107

4W-8837: LINES GP-FUEL DRAIN

LINES GP-FUEL DRAIN

4W-8837 LINES GP-FUEL DRAIN
S/N 9CB1-99999
PART OF 2Y-8621, 2Y-9496, 5Y-1831 ENGINE AR
ALSO AN ATTACHMENT

i00144212 SEBP1717

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	1N-3980	[1]	PLUG
2.	030-7946 C	[1]	ELBOW
3.	2T-0676 I	[1]	HOSE AS-DRAIN
4.	030-7942	[1]	ELBOW
5.	3J-1907	[1]	SEAL-O-RING
6.	6K-9194	[1]	ELBOW-FLARED
7.	3J-7354 C	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP17170108

4P-9950: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

4P-9950 LINES GP-FUEL INJECTION
S/N 9CB2623-99999
PART OF 8N-8170 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT

i00144205 SEBP1717

4P9950 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	4P-9961	[1]	LINE AS-FUEL INJECTION
2.	4P-9962	[1]	LINE AS-FUEL INJECTION
3.	1W-9169	[2]	CLAMP-FUEL LINE (THREADED)
4.	1W-9168	[3]	CLAMP-FUEL LINE (NON-THREADED)
5.	5P-4939	[2]	SCREW-MACHINE (10-24X15.88-IN)
6.	2W-0845	[1]	BRACKET AS
7.	9N-3388	[1]	BOLT (10-24X0.75-IN)
8.	1W-9167	[1]	CLAMP AS-FUEL LINE

#SEBP17170109

4P-9960: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

4P-9960 LINES GP-FUEL INJECTION
S/N 9CB2623-99999
PART OF 8N-8170 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT

i00144206 SEBP1717

4P9960 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 120G MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	4P-9963	[1]	LINE AS-FUEL INJECTION
2.	4P-9964	[1]	LINE AS-FUEL INJECTION
3.	1W-9169	[2]	CLAMP-FUEL LINE (THREADED)(3.9MM DIA HOLE)
4.	1W-9168	[4]	CLAMP-FUEL LINE (NON-THREADED)(5.5MM DIA HOLE)
5.	5P-4939	[2]	SCREW-MACHINE (10-24X15.88-IN)
6.	1W-9167	[2]	CLAMP AS-FUEL LINE
			(EACH INCLUDES)
	1W-9168	[1]	CLAMP-FUEL LINE (NON-THREADED)
	9L-9159	[1]	SPACER (5/8-IN THK)
7.	9N-3388	[1]	BOLT (10-24X0.75-IN)
8.	6C-0756	[1]	BRACKET AS
9.	4B-4274	[1]	WASHER (5.5X13X1.2-MM THK)
10.	6I-1565	[1]	BRACKET AS
	8K-2090	[1]	TUBE
11.	7M-9910	[1]	SCREW-MACHINE (10-24X1-IN)