5Y1340 SHIM GP-FLANGE PART OF 5Y1323 PUMP-GOVERNOR, FUEL INJECTION & FUEL TRANSFER 3306B GEN SET ENGINE

Pos.	Part No	Qty	Parts name
1.	2Y-6143	[1]	WIRE
2.	2Y-6150	[2]	NUT
3.	2Y-6142	[1]	SEAL
4.	2Y-6140	[1]	PLUG
5.	2Y-6122	[1]	NUT
6.	2Y-6125	[1]	PLUG
	2Y-8400	[1]	GASKET
7.	2Y-8381	[1]	PLUG
8.	2Y-5872	[1]	GASKET
9.	2Y-8376 Y	[1]	HOUSING AS
10.	2Y-6124	[5]	SCREW
11.	2Y-6151	[2]	KEY
12.	2Y-6121	[1]	SCREW
13.	2Y-6123 M	[1]	SCREW
14.	2Y-6137	[1]	BOLT
15.	2Y-8407 M	[1]	SCREW
16.	2Y-6144	[1]	STRIP (6.9MM)
	2Y-6145	[1]	STRIP (6.4MM)
	2Y-6146	[1]	STRIP (6.4MM)
	2Y-6147	[1]	STRIP (5.4MM)
17.	2Y-6149	[1]	PIN
	2Y-6148	[1]	WASHER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP17380103

5Y-0692: GOVERNOR GP

GOVERNOR GP

5Y0692 GOVERNOR GP-PART 2 OF 2
5Y0695-PAGE 50, 2Y9250-PAGE 55.02
PART OF 2Y9567 GOVERNOR & FUEL INJECTION PUMP

c571604 SEBP1738

For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-8382	[1]	SPRING
2.	2Y-9343	[1]	BLOCK
	5Y-0723	[1]	LINK
3.	2Y-6108	[2]	COTTER PIN
4.	2Y-8385	[1]	GASKET
5.	2Y-9341	[1]	LINK AS
	5Y-0722	[1]	LINK
	5Y-0609 M	[1]	NUT
	5Y-0659 M	[1]	SCREW
	5Y-0661	[1]	WASHER
6.	2Y-6113	[1]	PIN
7.	2Y-6132 J	[1]	GASKET
8.	2Y-9250 CY	[1]	SETTING GP
9.	2Y-6131 J	[1]	GASKET
10.	2Y-6375	[1]	COVER
11.	2Y-8983	[1]	LEVER
12.	2Y-6114	[1]	SCREW
	2Y-5878	[1]	GASKET
13.	2Y-6129	[1]	FORK
14.	2Y-6128	[1]	SHAFT
15.	2Y-6107 M	[2]	BOLT
	2Y-6106	[2]	LOCK
16.	2Y-6104	[1]	BUSHING
17.	2Y-6118	[2]	NUT
	2Y-6119 JL	[1]	LOCK
	2Y-6120 L	[1]	WASHER
18.	5Y-0695 Y	[1]	FLYWEIGHT GP
19.	2Y-6117	[1]	GASKET
20.	2Y-9588 M	[2]	SCREW
	2Y-6112	[1]	LOCKWASHER
21.	2Y-6103 M	[8]	SCREW
22.	5Y-0696	[1]	COVER AS
23.	5Y-0698 M	[1]	BOLT
24.	2Y-6118	[1]	NUT
25.	5Y-0699	[1]	BRACKET
	5Y-0700	[1]	SEAL
26.	5Y-0697 M	[1]	SCREW

			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE:
		[1]	KIT-GOVERNOR HARDWARE
			(INCL. BOLT, NUTS &
			PARTS MARKED L)
		[1]	KIT-GOVERNOR
			(INCL GASKET, SEAL, WIRE
			COTTER & PARTS MARKED J)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP17380104

5Y-0695: FLYWEIGHT GP

FLYWEIGHT GP

5Y0695 FLYWEIGHT GP
PART OF 5Y0692 & 5Y1323 GOVERNORS

c409461 SEBP1738

For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-6217	[1]	BOLT
2.	2Y-8974 B	[2]	SEAT 16.45MM(.647IN)LG
	2Y-8975 B	[2]	SEAT 16.60MM(.653IN)LG
	2Y-8976 B	[2]	SEAT 16.75MM(.659IN)LG
3.	2Y-6232	[1]	RING
4.	2Y-6219	[4]	DAMPER
5.	2Y-6218	[1]	PULLER
6.	2Y-6226 B	[1]	SHIM 1.85MM(.072IN)THK
	2Y-6227 B	[1]	SHIM 1.90MM(.074IN)THK
	2Y-6228 B	[1]	SHIM 1.95MM(.076IN)THK
	2Y-6229 B	[1]	SHIM 2.00MM(.078IN)THK
	2Y-6230 B	[1]	SHIM 2.05MM(.080IN)THK
	2Y-6231 B	[1]	SHIM 2.10MM(.082IN)THK
	2Y-6221 B	[1]	SHIM 1.60MM(.062IN)THK
	2Y-6222 B	[1]	SHIM 1.65MM(.064IN)THK
	2Y-6223 B	[1]	SHIM 1.70MM(.066IN)THK
	2Y-6224 B	[1]	SHIM 1.75MM(.068IN)THK
	2Y-6225 B	[1]	SHIM 1.80MM(.070IN)THK
7.	2Y-6220	[1]	NUT
8.	2Y-8921	[2]	SPRING (OUTER)
9.	2Y-6239	[2]	SEAT
10.	2Y-6240	[2]	NUT
11.	2Y-8920	[2]	SPRING (INNER)
12.	2Y-8915	[4]	WASHER
13.	2Y-6241	[4]	WASHER
	B		USE AS REQUIRED

#SEBP17380105

5Y-0245: PUMP GP-FUEL TRANSFER

PUMP GP-FUEL TRANSFER

5Y0245 PUMP GP-FUEL TRANSFER
PART OF 2Y9567 PUMP-GOVERNOR & FUEL INJECTION

c355858 SEBP1738

5Y0245 PUMP GP-FUEL TRANSFER Parts scheme

For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-9344	[1]	BODY AS
2.	5Y-0242	[1]	NIPPLE
3.	2Y-5795	[3]	PLUG
4.	2Y-5796 L	[3]	GASKET
5.	2Y-5794 L	[3]	SPRING
6.	2Y-5793 L	[3]	VALVE
7.	5Y-0243	[1]	NIPPLE
8.	2Y-5804	[1]	LIFTER-TRANSFER PUMP
9.	2Y-5781 L	[1]	RING
10.	5Y-0244 LJ	[1]	SEAL
11.	2Y-5788 J	[1]	ROD
12.	5Y-0240 J	[1]	PISTON
13.	2Y-5790	[1]	SPRING
14.	5Y-0241	[1]	PLUG
15.	2Y-5792 L	[1]	GASKET
16.	2Y-5797	[1]	PUMP AS
17.	2Y-7295	[2]	SEAL
18.	2Y-7302	[1]	BOLT
19.	5Y-0271	[1]	BASE
20.	2Y-5807 P	[1]	BAIL
21.	2Y-5801 S	[1]	ELEMENT
22.	2Y-5798 S	[1]	BOWL
23.	2Y-5803 S	[1]	SPRING
24.	2Y-5808 P	[1]	NUT
25.	2Y-5806 PM	[1]	BOLT
26.	2Y-5805 S	[1]	SEAL

			THE FOLLOWING REPAIR
			KITS ARE AVAILABLE:
	2Y-9408	[1]	KIT-VALVE (INCLUDES
			PARTS MARKED L)
	5Y-0246	[1]	KIT-FUEL TRANSFER PUMP (INCLUDES
			BODY & PARTS MARKED J)
		[1]	KIT-TRANSFER PUMP (INCLUDES
			PARTS MARKED P)
		[1]	KIT-BOWL (INCLUDES
			PARTS MARKED S)
	M		METRIC PART

#SEBP17380106

5Y-1309: PUMP AS-FUEL TRANSFER

PUMP AS-FUEL TRANSFER

5Y1309 PUMP AS-FUEL TRANSFER
PART OF 5Y1323 PUMP-GOVERNOR, FUEL INJECTION & TRANSFER

c471941 SEBP1738

5Y1309 PUMP AS-FUEL TRANSFER Parts scheme

For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-5792	[1]	GASKET
2.	5Y-0242	[2]	NIPPLE
3.	2Y-5795	[3]	PLUG
4.	2Y-5796	[3]	GASKET
5.	2Y-5794	[3]	SPRING
6.	2Y-5793	[3]	VALVE
7.	032-1268	[1]	ELBOW
8.	2Y-5804	[1]	LIFTER-TRANSFER PUMP
9.	2Y-5781	[1]	RING
10.	5Y-0244	[1]	SEAL
11.	2Y-5788	[1]	ROD
12.	5Y-0240	[1]	PISTON
13.	2Y-5790	[1]	SPRING
14.	5Y-0241	[1]	PLUG

#SEBP17380107

5Y-1480: STRIP GP

STRIP GP

5Y1480 STRIP GP
PART OF 5Y1323 GOVERNOR, FUEL INJECTION & FUEL TRANSFER

SEBP17380107 SEBP1738

For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name

2Y-6144	[1]	STRIP (6.9 MM)
2Y-6145	[1]	STRIP (6.4 MM)
2Y-6146	[1]	STRIP (5.9 MM)
2Y-6147	[1]	STRIP (5.4 MM)

#SEBP17380108

2Y-9561: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

2Y9561 LINES GP-FUEL INJECTION
2Y8366-PAGE 53

c493042 SEBP1738

2Y9561 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1A-2812 B	[2]	WASHER
2.	0S-1624	[1]	BOLT
	5P-8247	[1]	WASHER-HARD
3.	5M-2894	[5]	WASHER
4.	1A-2029	[1]	BOLT
5.	8M-5253	[1]	SEAL
6.	4N-4057	[1]	ADAPTER
7.	5M-6214	[1]	PLUG-PIPE
8.	0S-1619	[2]	BOLT
9.	8M-5248	[1]	SEAL-O-RING
10.	2Y-6101	[1]	BRACKET AS
11.	0S-1617	[2]	BOLT
	5P-4116	[2]	WASHER
12.	2Y-8430	[1]	BLOCK AS
13.	2M-2488	[1]	STUD
14.	1D-4717	[2]	NUT
15.	1B-4203	[3]	NUT-FULL
16.	2H-3934	[1]	SEAL
17.	2Y-8366 Y	[1]	LINES GP-FUEL INJECTION
18.	5Y-1332	[1]	HOSE AS
19.	6K-9194	[1]	ELBOW
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP17380109

2Y-8362: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

2Y8362 LINES GP-FUEL INJECTION
PART OF 2Y8366 LINES-FUEL INJECTION

c355674 SEBP1738

2Y8362 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3306B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-8114	[1]	LINE AS
2.	2Y-8113	[1]	LINE AS
3.	2Y-8112	[1]	LINE AS
4.	2Y-8111	[1]	LINE AS
5.	1W-9169	[8]	CLAMP (THREADED)
6.	1W-9168	[7]	CLAMP (DOUBLE LINE)
7.	5P-4939	[7]	SCREW AS-MACHINE
8.	9N-3388	[1]	SCREW-SELF LOCKING
9.	1W-9167	[1]	CLAMP AS-FUEL LINE
			(SINGLE LINE)
	1W-9168	[1]	CLAMP (DOUBLE LINE)
10.	2W-0743	[1]	BRACKET AS

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Tool Operating Manual

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Service Magazine

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3306B :

5Y-1345 SHIM GP-FRONT BEARING

2Y-6158 SHIM GP

5Y-0691 PUMP GP-FUEL INJECTION

5Y-1323 PUMP GP-GOV, FUEL INJ & TFR

2Y-9567 PUMP GP-GOV & FUEL INJ

5Y-1350 SHIM GP-REAR BEARING

5Y-0692 GOVERNOR GP

5Y-0695 FLYWEIGHT GP

5Y-0245 PUMP GP-FUEL TRANSFER

5Y-1309 PUMP AS-FUEL TRANSFER

5Y-1480 STRIP GP

2Y-9561 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION

41,500

Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

33,500

Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.

38.001

Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.