AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-1634 GOVERNOR GP PSG-24 VOLT PART OF 5Y-0802 GOVERNOR GP FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE WHEN USED WITH A GENERATOR AN ATTACHMENT G3306


FUEL SYSTEM
GOVERNOR GP
REGULATOR GP-GAS PRESSURE
CONTROL GP-FUEL

GAS ENGINE G3306 GAS ENGINE 3CF
 G3306 ENGINE 3CF00001-UP SEBP1740 G3306 3CF   (1988)

FUEL SYSTEM

GOVERNOR GP
FASTENER GP-GOVERNOR
9Y-1978 FASTENER GP-GOVERNOR
GOVERNOR GP
1W-1633 GOVERNOR GP
GOVERNOR GP
1W-1634 GOVERNOR GP
GOVERNOR GP
1W-1634 GOVERNOR GP
GOVERNOR GP
4W-6815 GOVERNOR GP
5Y-0801 GOVERNOR GP
 

#SEBP17400130
 

1W-1634: GOVERNOR GP

1W-1634 GOVERNOR GP
PSG-24 VOLT
PART OF 5Y-0802 GOVERNOR GP
FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE WHEN USED WITH A GENERATOR
AN ATTACHMENT
i00895206 SEBP1740
1W1634 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-6815 CY [1] GOVERNOR GP  
2. 8L-4838 [1] LEVER-GOVERNOR OUTPUT  
  3L-1474 [1] PIN-TAPERED  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400131
 

1W-1634: GOVERNOR GP

1W-1634 GOVERNOR GP
PSG-24 VOLT
PART OF 5Y-0802 GOVERNOR GP
FOR USE WITH TURBOCHARGED AFTERCOOLED ENGINE WHEN USED WITH A GENERATOR
AN ATTACHMENT
i00355709 SEBP1740
1W1634 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-1589 CY [1] GOVERNOR GP  
2. 8L-4838 [1] LEVER-GOVERNOR OUTPUT  
  3L-1474 [1] PIN-TAPERED  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400132
 

4W-6815: GOVERNOR GP

4W-6815 GOVERNOR GP
WOODWARD
PART OF 1W-1633, 1W-1634 GOVERNOR GP
AN ATTACHMENT
i00895211 SEBP1740
4W6815 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-3891 C [2] WASHER  
2. 5N-3887 [1] PIN  
3. 6N-7530 [1] PIN-PIVOT  
4. 1W-4892 [1] LEVER AS  
5. 6L-4007 [1] VALVE AS-RELIEF (RELIEF)  
6. 6F-3480 [1] SLEEVE AS-ADJUSTMENT  
7. 2N-1894 [1] PIN-SPRING  
8. 5N-3915 [1] LINK AS  
9. 5N-3890 [1] SHAFT-SPEED ADJUSTMENT  
10. 5N-3885 [1] LINK-SPEED DROOP  
11. 5N-4111 [1] SPACER (0.192X0.249X0.137-IN THK)  
12. 5N-4112 [1] SPRING-TORSION  
13. 5N-3892 [1] BRACKET  
14. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
15. 5N-3913 [1] LEVER  
16. 5N-3911 [1] SHAFT AS-DROOP  
17. 5N-3916 [1] SLEEVE AS-ADJUSTMENT  
18. 1N-3316 [3] SEAL-OIL  
19. 4B-2043 [1] NUT (8-32-THD)  
20. 5N-3883 [1] SCREW-DROOP ADJUSTMENT  
21. 6L-9838 [2] SHAFT-TERMINAL  
22. 3N-5723 [1] SPRING  
23. 3N-5729 [1] SEAT-SPRING  
24. 3B-4502 C [1] LOCKWASHER  
25. 3N-5728 [1] STRUT-SERVO  
26. 3N-5727 [1] PISTON-POWER  
27. 5N-3889 [1] VALVE-NEEDLE (NEEDLE)  
  5N-3908 [1] PLUG  
28. 5N-3912 [1] CASE AS  
29. 6L-3997 [1] PISTON-BUFFER  
30. 7L-3107 [1] BASE AS-GOVERNOR  
31. 6L-3995 [1] SEAT-SPRING  
32. 6L-3983 [1] GEAR-IDLER (10-TEETH)(10 TEETH)  
33. 6L-3994 [1] PLUNGER-VALVE  
34. 6L-3992 [1] BUSHING-TERMINAL  
35. 7N-0001 [1] BALL HEAD AS  
36. 7N-4533 [1] BEARING-THRUST  
37. 6L-3996 [1] SEAT-SPRING  
38. 7N-6052 [1] SPRING AS-SPEED  
39. 5N-3886 [1] SCREW (10-32X1.5-IN)  
40. 2F-2293 [1] GASKET-COVER  
41. 5N-3909 [1] CLUTCH AS  
42. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
43. 1W-4911 [1] COVER  
44. 9N-6225 [4] SCREW (6-32X47.625-MM)  
45. 4W-5123 C [1] MOTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
46. 5P-5624 BD WIRE (14-GA, BLACK)  
47. 8N-3834 [1] BUSHING  
48. 7W-3625 C [2] SPRING-BUFFER  
49. 3K-6168 C [1] BOLT-SOCKET HEAD (10-32X0.625-IN)  
50. 9B-1117 [4] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  7N-6807 [1] KIT-HARDWARE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP17400133
 

5Y-0801: GOVERNOR GP

5Y-0801 GOVERNOR GP
AN ATTACHMENT
i00385675 SEBP1740
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-5383 Y [1] DRIVE GP-GOVERNOR  
  7N-8341 Y [1] FASTENER GP-FUEL INJ PUMP  
  1W-1633 Y [1] GOVERNOR GP  
  8N-6670 Y [1] SWITCH GP-GOVERNOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400134
 

5Y-0802: GOVERNOR GP

5Y-0802 GOVERNOR GP
AN ATTACHMENT
i00385676 SEBP1740
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-5383 Y [1] DRIVE GP-GOVERNOR  
  9Y-1978 Y [1] FASTENER GP-GOVERNOR  
  1W-1634 Y [1] GOVERNOR GP  
  8N-6670 Y [1] SWITCH GP-GOVERNOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400135
 

7N-2375: GOVERNOR GP

7N-2375 GOVERNOR GP
i00408645 SEBP1740
7N2375 GOVERNOR GP Parts scheme 7N2375 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8883 [1] SHAFT  
2. 9S-4671 [1] SEAL-LIP TYPE  
3. 2N-2168 [1] SCREW-ADJUSTMENT  
4. 2P-8737 [1] HOUSING AS-GOVERNOR  
5. 9S-0798 [1] BUSHING  
6. 8S-0134 [1] BUSHING  
7. 4F-4585 [1] PLUG-CORE  
8. 8M-8403 [1] SPRING-GUIDE  
9. 2S-7905 [2] PLUG-PIPE  
10. 7D-5473 [1] BOLT-SOCKET HEAD (8-32X0.75-IN)  
11. 7N-1651 [1] COLLAR-LOAD STOP  
12. 8M-8739 [1] BOLT-LOAD STOP  
13. 8H-9181 [1] SPRING-BUMPER  
14. 6N-3504 [1] SEAT-GOVERNOR SPRING  
15. 8M-9140 C [1] SPRING  
16. 6N-8629 [1] SEAT-SPRING  
17. 9M-6302 [2] WASHER-SPECIAL  
18. 4N-3887 [1] RING-RETAINING  
19. 2S-0007 [1] SLEEVE-PILOT  
20. 3K-0810 [1] RING-LOCK  
21. 7M-7219 [1] BEARING-THRUST  
22. 7M-7193 [2] RACE-THRUST BEARING  
23. 2P-8630 [1] DOWEL  
24. 9M-6303 [1] SPRING  
25. 1W-1132 C [1] WEIGHT AS-GOVERNOR  
26. 1S-5440 [2] DOWEL  
27. 1A-9579 C [1] BOLT (5/16-18X1.5-IN)  
28. 1H-5514 C [4] BOLT (5/16-18X1.625-IN)  
29. 9S-5393 [1] PLUG  
  2P-8763 [1] GASKET  
30. 2B-2695 C [1] BOLT (5/16-18X0.875-IN)  
31. 7N-7163 [1] COVER  
32. 4B-9747 [1] WASHER (0.266X0.375X0.031-IN THK)  
33. 9F-6580 [1] BOLT (1/4-20X1.125-IN)  
34. 5L-8992 [1] COVER-ADJUSTMENT  
  5L-8991 [1] GASKET-COVER  
35. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
36. 2W-1491 [1] LEVER-CONTROL  
37. 9S-4468 [1] BOLT-SPECIAL  
  2F-4159 [1] LOCKNUT  
38. 7B-8105 [1] RING-LOCK  
39. 6N-9339 [1] GASKET-GOVERNOR HOUSING  
40. 0S-1618 C [1] BOLT (5/16-18X1-IN)  
41. 0S-1615 [3] BOLT (1/4-20X0.75-IN)  
42. 9M-6293 [1] LOCK-CYLINDER  
43. 2P-8725 [1] PISTON AS  
44. 5P-9757 [1] SEAL-O-RING  
45. 2P-8697 [1] GASKET  
46. 1H-5514 [3] BOLT (5/16-18X1.625-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17400136
 

9Y-1589: GOVERNOR GP

9Y-1589 GOVERNOR GP
24 VOLT, DC
PART OF 1W-1634 GOVERNOR GP
AN ATTACHMENT
i00438265 SEBP1740
9Y1589 GOVERNOR GP Parts scheme 9Y1589 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5123 [1] MOTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
2. 9N-6225 [4] SCREW (6-32X47.625-MM)  
  9B-1117 [4] LOCKWASHER  
3. 5N-3909 [1] CLUTCH AS  
4. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
5. 2F-2293 [1] GASKET-COVER  
6. 5N-3886 [1] SCREW (10-32X1.5-IN)  
7. 7N-6052 [1] SPRING AS-SPEED  
8. 6L-3996 [1] SEAT-SPRING  
9. 7N-4533 [1] BEARING-THRUST  
10. 9Y-1799 [1] BALL HEAD AS  
11. 6L-4003 [1] BUSHING  
12. 9Y-1987 [1] SEAL  
13. 6L-3994 [1] PLUNGER-VALVE  
14. 8N-3834 [1] BUSHING  
15. 6L-3983 [1] GEAR-IDLER (10-TEETH)(10 TEETH)  
16. 6L-3995 [1] SEAT-SPRING  
17. 7L-3107 [1] BASE AS-GOVERNOR  
18. 7W-3625 [2] SPRING-BUFFER  
19. 6L-3997 [1] PISTON-BUFFER  
20. 5N-3912 [1] CASE AS  
21. 3N-5727 [1] PISTON-POWER  
22. 3N-5728 [1] STRUT-SERVO  
23. 3N-5729 [1] SEAT-SPRING  
24. 3N-5723 [1] SPRING  
25. 1W-4911 [1] COVER  
26. 5N-3891 [2] WASHER  
27. 5N-3887 [1] PIN  
28. 6N-7530 [1] PIN-PIVOT  
29. 1W-4892 [1] LEVER AS  
30. 6L-4007 [1] VALVE AS-RELIEF  
31. 6F-3480 [1] SLEEVE AS-ADJUSTMENT  
32. 2N-1894 [1] PIN-SPRING  
33. 5N-3915 [1] LINK AS  
34. 5N-3890 [1] SHAFT-SPEED ADJUSTMENT  
35. 5N-3885 [1] LINK-SPEED DROOP  
36. 5N-4111 [1] SPACER (0.192X0.249X0.137-IN THK)  
37. 5N-3892 [1] BRACKET  
38. 3K-6168 [1] BOLT-SOCKET HEAD (10-32X0.625-IN)  
39. 3B-4502 [1] LOCKWASHER  
40. 5N-3916 [1] SLEEVE AS-ADJUSTMENT  
41. 5N-3913 [1] LEVER  
42. 5N-3911 [1] SHAFT AS-DROOP  
43. 4B-2043 [1] NUT (8-32-THD)  
44. 5N-3883 [1] SCREW-DROOP ADJUSTMENT  
45. 6L-9838 [2] SHAFT-TERMINAL  
46. 1N-3316 [3] SEAL-OIL  
47. 5N-4112 [1] SPRING-TORSION  
48. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
49. 5N-3889 [1] VALVE-NEEDLE  
50. 9Y-1220 [2] PLUG  
51. 2W-0224 [2] SEAL-O-RING  
52. 5N-3908 [1] PLUG  
   
    AVAILABLE REPAIR KIT(S):
  7N-6807 [1] KIT-HARDWARE  
 

#SEBP17400137
 

2W-8482: REGULATOR GP-GAS PRESSURE

2W-8482 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
i00360933 SEBP1740
2W8482 REGULATOR GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6022 [1] REGULATOR-PRESSURE  
2. 2W-8484 [1] BRACKET  
3. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
4. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 1D-4716 [1] NUT-FULL (5/16-18-THD)  
7. 8M-2773 [1] CLIP (LOOP)  
8. 7D-8793 [1] ELBOW-FLARED  
9. 003-9163 [1] ELBOW  
10. 3B-7266 [1] NIPPLE-PIPE  
11. 7L-4224 [1] JOINT AS-TUBE  
  3N-2723 [2] SEAL  
12. 7B-2742 [3] BOLT (1/4-20X1.25-IN)  
13. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 9S-8750 [3] NUT-FULL (1/4-20-THD)  
15. 6S-2289 [1] TEE  
16. 6V-7538 [1] ELBOW-PIPE  
17. 7W-5098 [1] FITTING AS  
18. 5M-6213 [1] PLUG-PIPE  
19. 2W-8721 [1] FITTING  
20. 8S-4950 [1] CAP (FLARED 37-DEG)  
21. 2W-8483 [1] BRACE  
22. 5Y-1332 I [1] HOSE AS  
23. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
24. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 2W-9148 [1] FITTING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP17400138
 

7N-6112: REGULATOR GP-GAS PRESSURE

7N-6112 REGULATOR GP-GAS PRESSURE
i00410108 SEBP1740
7N6112 REGULATOR GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4950 [1] CAP (FLARED 37-DEG)  
2. 2W-8721 [1] FITTING  
3. 2W-8615 C [1] FITTING AS  
4. 3H-6906 [2] PIPE  
5. 6V-6897 C [1] JOINT AS-PIPE  
  6V-6898 [2] SEAL  
6. 6V-7538 C [1] ELBOW-PIPE  
7. 5M-6213 C [1] PLUG-PIPE  
8. 032-1268 [1] CONNECTOR (90-DEG)  
9. 7C-9950 C [1] TUBE AS  
10. 7N-3395 [1] BRACE  
11. 2W-6022 C [1] REGULATOR-PRESSURE  
12. 6S-2289 [1] TEE  
13. 1B-9575 [2] BOLT (5/16-18X1.56-IN)  
14. 7N-2999 [1] BRACE-REGULATOR  
15. 7B-2742 [3] BOLT (1/4-20X1.25-IN)  
  1B-4330 [3] NUT (1/4-20-THD)  
  5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17400139
 

1N-9306: VALVE AS-GAS SHUTOFF

1N-9306 VALVE AS-GAS SHUTOFF
GAS
FOR USE WITH CAPACITOR DISCHARGE
AN ATTACHMENT
i00352878 SEBP1740
1N9306 VALVE AS-GAS SHUTOFF Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY)
 

Information:

Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10

Caterpillar Parts SIS Catalog G3306 :

GOVERNOR GP
1W-1633 GOVERNOR GP
FASTENER GP-GOVERNOR
9Y-1978 FASTENER GP-GOVERNOR
FASTENER GP-FUEL INJ PUMP
7N-8354 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
7N-8341 FASTENER GP-FUEL INJ PUMP
DRIVE GP-TACHOMETER
4N-1402 DRIVE GP-TACHOMETER
DRIVE GP-GOVERNOR
8N-2379 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7W-5383 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
7N-4360 DRIVE GP-GOVERNOR
GOVERNOR GP
1W-1634 GOVERNOR GP
GOVERNOR GP
4W-6815 GOVERNOR GP
5Y-0801 GOVERNOR GP
5Y-0802 GOVERNOR GP
GOVERNOR GP
7N-2375 GOVERNOR GP
GOVERNOR GP
9Y-1589 GOVERNOR GP
REGULATOR GP-GAS PRESSURE
2W-8482 REGULATOR GP-GAS PRESSURE
REGULATOR GP-GAS PRESSURE
7N-6112 REGULATOR GP-GAS PRESSURE

Truck sale:

Caterpillar G3306, Construction
133,280 
Caterpillar G3306, Construction
- Stationary Generator Sets
HOLT CAT
Caterpillar G3306, Construction
90,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3306, Construction
22,500 
Caterpillar G3306, Construction
- Petroleum Engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar G3306, Construction
55,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
CATERPILLAR G3306 2014
 
CATERPILLAR G3306 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.