AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N-2706 ALTERNATOR GP-CHARGING 24 VOLT, 35 AMPERE FOR USE WITH FAN DRIVE CANNOT BE USED WITH MOBILE EQUIPMENT FRONT SUPPORT AN ATTACHMENT G3306


ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
CONTACTOR GP
MAGNETO GP
IGNITION GP

GAS ENGINE G3306 GAS ENGINE 3CF
 G3306 ENGINE 3CF00001-UP SEBP1740 G3306 3CF   (1988)

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
3N-2706 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
6T-1395 ALTERNATOR GP-CHARGING
 

#SEBP17400140
 

3N-2706: ALTERNATOR GP-CHARGING

3N-2706 ALTERNATOR GP-CHARGING
24 VOLT, 35 AMPERE
FOR USE WITH FAN DRIVE
CANNOT BE USED WITH MOBILE EQUIPMENT FRONT SUPPORT
AN ATTACHMENT
i00366063 SEBP1740
3N2706 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-9683 [1] SPACER (0.56X1X1.5-IN THK)  
2. 2H-6488 [1] BOLT (1/2-13X5-IN)  
3. 1D-4719 [2] NUT-FULL (1/2-13-THD)  
4. 6T-1395 Y [1] ALTERNATOR GP-CHARGING  
5. 8S-4182 [1] STRAP  
6. 9S-1366 [1] BOLT (1/2-13X2.5-IN)  
  2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
  1K-4649 [1] SPACER (0.516X1X1-IN THK)  
7. 3N-2705 [1] BRACKET-MOUNTING  
8. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
  1D-4717 [1] NUT (3/8-16-THD)  
9. 0S-1619 [1] BOLT (3/8-16X3-IN)  
10. 3N-2704 [1] PLATE-MOUNTING  
11. 7B-3235 [1] BOLT (1/2-13X1.375-IN)  
12. 0S-1618 [2] BOLT (5/16-18X1-IN)  
13. 8L-4529 [1] PULLEY-ALTERNATOR  
14. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 6L-3483 [2] COVER-TERMINAL  
16. 8L-8413 B [4] STRAP-CABLE (WHITE)  
17. 5Y-1134 [1] HARNESS AS  
18. 8M-2770 B [2] CLIP (LOOP)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400141
 

6T-1395: ALTERNATOR GP-CHARGING

6T-1395 ALTERNATOR GP-CHARGING
24 VOLT, 35 AMPERE. MOTOROLA
PART OF 3N-2706 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00401880 SEBP1740
6T1395 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-4117 C [1] CAPACITOR  
2. 7T-0677 C [1] DIODE AS-NEGATIVE (3 DIODE)  
3. 7T-0676 C [1] DIODE AS-POSITIVE (3 DIODE)  
4. 6T-9445 C [1] REGULATOR-VOLTAGE  
5. 6T-2026 C [1] HOUSING-REAR  
6. 9G-5208 C [1] RETAINER-REAR BEARING  
7. 6T-2032 C [1] GASKET-COVER  
8. 6T-2031 C [1] BRUSH AS  
9. 6T-4116 C [1] GASKET  
10. 6T-4100 C [1] PLATE-ADAPTER  
11. 6T-9443 C [1] STATOR AS  
12. 3N-1202 C [1] ROTOR AS  
13. 5P-6836 C [1] BEARING (DOUBLE SHIELD)  
14. 3K-6168 C [1] BOLT-SOCKET HEAD (10-32X0.625-IN)  
  7H-2079 C [1] LOCKWASHER  
  3N-1223 C [1] WASHER (0.196X0.312X0.067-IN THK)  
15. 3N-1200 C [1] RING AS-SLIP  
16. 8L-9655 C [1] HOUSING-FRONT  
17. 6T-2027 C [1] RETAINER-BEARING  
18. 1N-9087 C [1] SPACER (0.628X1.35X0.33-MM THK)  
19. 8L-9654 C [4] SLEEVE-SHAFT  
20. 1B-8704 C [1] KEY-WOODRUFF  
21. 1S-7056 C [1] BALL BEARING  
22. 8L-9661 C [1] FAN-ALTERNATOR (14-BLADE)  
23. 7T-0895 C [2] CAP  
24. 4B-2046 C [3] NUT (10-24-THD)  
25. 4L-6458 C [1] NUT-FULL (1/4-20-THD)  
26. 6V-8645 C [1] NUT (5/8-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7X-1028 C [1] KIT-TERMINAL  
    (INCLUDES INSULATORS, NUTS, LOCKWASHERS, SCREWS & WASHERS)
  7X-1029 C [1] KIT-HARDWARE  
    (INCLUDES BOLTS, LOCKWASHERS, NUTS, SCREWS, STRAPS & WASHERS)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17400142
 

7L-7367: CONTACTOR GP-OVERSPEED

7L-7367 CONTACTOR GP-OVERSPEED
FOR USE WITH ENGINES RATED 1600-2950 EQUIPPED WITH TACHOMETER DRIVE
AN ATTACHMENT
i00407430 SEBP1740
7L7367 CONTACTOR GP-OVERSPEED Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4560 [2] BOOT-SPARK PLUG  
2. 3N-4026 [1] CONTACTOR (OVERSPEED)  
  5M-1822 [3] WASHER (9.9X19X1-MM THK)  
3. 8M-2770 [2] CLIP (LOOP)  
4. 5Y-1099 [1] HARNESS AS  
 

#SEBP17400143
 

7N-4313: DRIVE GP-MAGNETO

7N-4313 DRIVE GP-MAGNETO
i00409677 SEBP1740
7N4313 DRIVE GP-MAGNETO Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4203 [3] NUT-FULL (3/8-24-THD)  
2. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2H-3934 [1] SEAL-O-RING  
4. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
5. 3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
6. 7N-6202 [1] TUBE AS  
7. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
  1D-4717 [1] NUT (3/8-16-THD)  
8. 8L-6557 C [1] CONNECTOR  
9. 7N-2997 [1] HOUSING AS  
10. 6F-0984 [2] DOWEL  
11. 2A-3348 [2] DOWEL  
12. 7N-2996 [1] SHAFT  
13. 1S-9848 [1] BUSHING  
14. 1S-7371 [1] BEARING  
15. 4N-2954 [1] SLEEVE-CAMSHAFT  
16. 7N-2589 [1] GEAR AS-IDLER (24-TEETH)  
  7L-5774 [1] BEARING  
17. 7N-2998 [1] ADAPTER AS  
18. 7N-7239 [1] BUSHING-TERMINAL  
19. 8M-8356 [1] BEARING  
20. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
21. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
22. 9B-0459 [1] COVER  
  2K-3967 [1] GASKET  
23. 8M-1051 [1] SEAL  
24. 7N-2588 [1] SHAFT AS  
25. 7N-2995 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17400144
 

7N-2587: GEAR GP-MAGNETO DRIVE

7N-2587 GEAR GP-MAGNETO DRIVE
PART OF 2W-4872, 2W-6617, 7N-3973, 8N-2038 IGNITION GP-GAS ENGINE
ALSO AN ATTACHMENT
i00408688 SEBP1740
7N2587 GEAR GP-MAGNETO DRIVE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-6704 C [1] GEAR AS-MAGNETO DRIVE (14-TEETH)(14 TEETH)  
2. 6F-0984 [1] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17400145
 

2W-4872: IGNITION GP-GAS ENGINE

2W-4872 IGNITION GP-GAS ENGINE
AN ATTACHMENT
i00359242 SEBP1740
2W4872 IGNITION GP-GAS ENGINE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-0569 [1] BOLT (5/16-18X0.5-IN)  
2. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-2479 [6] WIRE AS-PLUG  
4. 8M-5253 [1] SEAL-O-RING  
5. 8L-5850 [1] PANEL AS-INSTRUMENT  
6. 3N-2780 [1] GAUGE-OIL PRESSURE (ENGINE)  
7. 6L-2309 [1] SWITCH-STOP  
8. 8L-5849 [1] SWITCH-MAGNETIC  
9. 3N-2781 [1] GAUGE-WATER TEMPERATURE  
10. 1S-0996 [2] CLIP  
11. 2W-3747 [6] TRANSFORMER AS  
12. 5P-1476 [12] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
13. 6V-3964 [12] WASHER-HARD (8.8X25.5X5-MM THK)  
14. 2B-2695 [12] BOLT (5/16-18X0.875-IN)  
15. 2W-3748 [1] HARNESS AS-WIRING  
16. 8L-8413 B [30] STRAP-CABLE (WHITE)  
17. 8D-0693 [2] WIRE AS  
    (EACH INCLUDES)
18. 5P-5624 BD WIRE (14-GA, BLACK)  
19. 8M-0537 [1] TERMINAL  
20. 2W-5129 [1] WIRE AS  
21. 5P-5624 BD WIRE (14-GA, BLACK)  
22. 2L-8076 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
23. 5P-5624 BD WIRE (14-GA, BLACK)  
24. 9M-9093 [2] FERRULE  
25. 2N-2839 [6] PLUG AS-SPARK  
26. 3J-5389 [1] PLUG (EXTERNAL)  
27. 8M-8157 [6] SEAL-O-RING  
28. 5P-0695 BE CONDUIT  
29. 2W-3749 Y [1] MAGNETO GP  
30. 6L-5270 [1] GASKET-MAGNETO  
31. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
32. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 7N-2587 Y [1] GEAR GP-MAGNETO DRIVE (14-TEETH)  
34. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
35. 5M-6214 [1] PLUG (1/8-27 PTF)  
36. 0S-1619 [2] BOLT (3/8-16X3-IN)  
37. 4N-4057 [1] ADAPTER  
38. 8M-5248 [1] SEAL-O-RING  
  2H-2143 F [1] MARKER  
  5P-1477 F [4] TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)(GROUND)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400146
 

2W-6617: IGNITION GP-GAS ENGINE

2W-6617 IGNITION GP-GAS ENGINE
FOR USE WITH ALTRONIC IGNITION GP
AN ATTACHMENT
i00359926 SEBP1740
2W6617 IGNITION GP-GAS ENGINE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-0569 [1] BOLT (5/16-18X0.5-IN)  
2. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-2479 [6] WIRE AS-PLUG  
4. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 8L-5850 [1] PANEL AS-INSTRUMENT  
6. 3N-2780 [1] GAUGE-OIL PRESSURE (ENGINE)  
7. 6L-2309 [1] SWITCH-STOP  
8. 8L-5849 [1] SWITCH-MAGNETIC  
9. 3N-2781 [1] GAUGE-WATER TEMPERATURE  
10. 1S-0996 [2] CLIP  
11. 2W-3747 [6] TRANSFORMER AS  
12. 2L-8076 [12] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
13. 6V-3964 [12] WASHER-HARD (8.8X25.5X5-MM THK)  
14. 2B-2695 [12] BOLT (5/16-18X0.875-IN)  
15. 2W-3748 [1] HARNESS AS-WIRING  
16. 8L-8413 B [30] STRAP-CABLE (WHITE)  
17. 8D-0693 [2] WIRE AS  
    (EACH INCLUDES)
18. 5P-5624 BD WIRE (14-GA, BLACK)  
19. 8M-0537 [1] TERMINAL  
20. 2W-5129 [1] WIRE AS  
21. 5P-5624 BD WIRE (14-GA, BLACK)  
22. 2L-8076 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
23. 5P-5624 BD WIRE (14-GA, BLACK)  
24. 9M-9093 [2] FERRULE  
25. 2N-2839 [6] PLUG AS-SPARK  
26. 7N-2587 Y [1] GEAR GP-MAGNETO DRIVE (14-TEETH)  
27. 8M-8157 [6] SEAL-O-RING  
28. 5P-0695 BE CONDUIT  
29. 2W-3749 Y [1] MAGNETO GP  
30. 6L-5270 [1] GASKET-MAGNETO  
31. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
  2L-8066 F [4] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)(GROUND)  
  2H-2143 F [1] MARKER  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400147
 

7N-3973: IGNITION GP-GAS ENGINE

7N-3973 IGNITION GP-GAS ENGINE
Type 1
i00409433 SEBP1740
7N3973 IGNITION GP-GAS ENGINE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2832 [6] TRANSFORMER AS  
    (EACH INCLUDES)
2. 6L-7273 [1] BRACKET AS  
3. 6L-2834 [1] WIRING GP-IGNITION  
  2H-2143 [1] MARKER  
4. 5P-5629 BD WIRE (14-GA, BLACK)  
5. 2L-8076 [16] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
6. 2L-8066 [5] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
7. 7N-7222 [6] WIRE AS-PLUG  
    (EACH INCLUDES)
8. 3N-1914 [1] TERMINAL  
9. 3N-1915 [1] TERMINAL (SNAP)  
10. 7N-2992 [1] INSULATOR  
11. 6L-7272 [1] BOOT-RUBBER  
  2B-8461 [1] TERMINAL  
12. 7N-2993 [1] COVER-SPARK PLUG  
13. 0S-1617 [12] BOLT (5/16-18X0.75-IN)  
  9N-0869 [24] WASHER-HARD (8.8X25.5X2-MM THK)  
14. 9M-9093 [2] FERRULE  
15. 1S-0996 [2] CLIP  
16. 2N-2839 [6] PLUG AS-SPARK  
17. 8M-8157 [6] SEAL-O-RING  
18. 1C-0569 [1] BOLT (5/16-18X0.5-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
19. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 7N-2587 Y [1] GEAR GP-MAGNETO DRIVE (14-TEETH)  
21. 6L-5270 [1] GASKET-MAGNETO  
22. 7L-3031 Y [1] MAGNETO AS  
23. 5P-0695 E CONDUIT (60 CM 20 IN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400148
 

7N-3973: IGNITION GP-GAS ENGINE

7N-3973 IGNITION GP-GAS ENGINE
Type 2
i00409435 SEBP1740
7N3973 IGNITION GP-GAS ENGINE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2832 [6] TRANSFORMER AS  
    (EACH INCLUDES)
2. 6L-7273 [1] BRACKET AS  
3. 5Y-0486 C [1] HARNESS AS  
4. 7N-2587 Y [1] GEAR GP-MAGNETO DRIVE (14-TEETH)  
5. 6L-5270 [1] GASKET-MAGNETO  
6. 7L-3031 Y [1] MAGNETO AS  
7. 7N-7222 [6] WIRE AS-PLUG  
    (EACH INCLUDES)
8. 3N-1914 [1] TERMINAL  
9. 3N-1915 [1] TERMINAL (SNAP)  
10. 7N-2992 [1] INSULATOR  
11. 6L-7272 [1] BOOT-RUBBER  
  2B-8461 [1] TERMINAL  
12. 7N-2993 [1] COVER-SPARK PLUG  
13. 0S-1617 [12] BOLT (5/16-18X0.75-IN)  
  9N-0869 [24] WASHER-HARD (8.8X25.5X2-MM THK)  
14. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 1S-0996 [2] CLIP  
16. 2N-2839 [6] PLUG AS-SPARK  
17. 8M-8157 [6] SEAL-O-RING  
18. 1C-0569 [1] BOLT (5/16-18X0.5-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17400149
 

8N-2038: IGNITION GP-GAS ENGINE

8N-2038 IGNITION GP-GAS ENGINE
i00429412 SEBP1740
8N2038 IGNITION GP-GAS ENGINE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2832 [6] TRANSFORMER AS  
    (EACH INCLUDES)
2. 6L-7273 [1] BRACKET AS  
3. 5Y-0486 [1] HARNESS AS  
4. 8M-8157 [6] SEAL-O-RING  
5. 1C-0569 [1] BOLT (5/16-18X0.5-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
7. 7N-2587 Y [1] GEAR GP-MAGNETO DRIVE (14-TEETH)  
8. 6L-5270 [1] GASKET-MAGNETO  
9. 7L-3031 Y [1] MAGNETO AS  
10. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
11. 0S-1617 [12] BOLT (5/16-18X0.75-IN)  
  9N-0869 [24] WASHER-HARD (8.8X25.5X2-MM THK)  
12. 1S-0996 [2] CLIP  
13. 2N-2839 [6] PLUG AS-SPARK  
14. 7N-7222 [6] WIRE AS-PLUG  
15. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3J-5389 [1] PLUG (EXTERNAL)  
17. 0S-1619 [2] BOLT (3/8-16X3-IN)  
18. 4N-4057 [1] ADAPTER  
19. 8M-5248 [1] SEAL-O-RING  
20. 5M-6214 [1] PLUG (1/8-27 PTF)  
21. 8M-5253 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Regulator And Field Coil Assemblies Used
1981/11/25
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Identification Of External Terminals On Alternators
1987/04/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

Caterpillar Parts SIS Catalog G3306 :

VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
REGULATOR GP-GAS PRESSURE
7N-6112 REGULATOR GP-GAS PRESSURE
REGULATOR GP-GAS PRESSURE
2W-8482 REGULATOR GP-GAS PRESSURE
GOVERNOR GP
9Y-1589 GOVERNOR GP
GOVERNOR GP
7N-2375 GOVERNOR GP
5Y-0802 GOVERNOR GP
5Y-0801 GOVERNOR GP
GOVERNOR GP
4W-6815 GOVERNOR GP
ALTERNATOR GP-CHARGING
6T-1395 ALTERNATOR GP-CHARGING
CONTACTOR GP-OVERSPEED
7L-7367 CONTACTOR GP-OVERSPEED
DRIVE GP-MAGNETO
7N-4313 DRIVE GP-MAGNETO
GEAR GP-MAGNETO DRIVE
7N-2587 GEAR GP-MAGNETO DRIVE
IGNITION GP-GAS ENGINE
2W-4872 IGNITION GP-GAS ENGINE
IGNITION GP-GAS ENGINE
2W-6617 IGNITION GP-GAS ENGINE
IGNITION GP-GAS ENGINE
7N-3973 IGNITION GP-GAS ENGINE
IGNITION GP-GAS ENGINE
7N-3973 IGNITION GP-GAS ENGINE

Truck sale:

Caterpillar G3306, Construction
133,280 
Caterpillar G3306, Construction
- Stationary Generator Sets
HOLT CAT
Caterpillar G3306, Construction
90,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3306, Construction
22,500 
Caterpillar G3306, Construction
- Petroleum Engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar G3306, Construction
55,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
CATERPILLAR G3306 2014
 
CATERPILLAR G3306 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.