AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N6085 MANIFOLD GP-EXHAUST 926 WHEEL LOADER


AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-EXHAUST
MUFFLER GP
OPERATOR STATION
INSTALLATION GP-CONTROLS
PEDAL GP
FUEL SYSTEM
GOVERNOR GP

WHEEL LOADER 926 WHEEL LOADER 94Z
 926E WHEEL LOADER 94Z02209-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1747 926 94Z   (1987)

AIR INLET AND EXHAUST SYSTEM

MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
6N-6085 MANIFOLD GP-EXHAUST
 

#SEBP17470080
 

6N-6085: MANIFOLD GP-EXHAUST

6N6085 MANIFOLD GP-EXHAUST
c400744 SEBP1747
6N6085 MANIFOLD GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-1943 C [4] BOLT-HIGH TEMP  
2. 6N-6962 C [2] LOCK  
3. 6L-6723 C [4] BOLT-HIGH TEMP  
4. 6L-8562 C [4] STUD-TAPERLOCK  
5. 2W-8213 C [1] MANIFOLD-EXHAUST  
6. 9L-8027 [1] GASKET  
7. 9L-9658 C [2] LOCK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17470081
 

7N-6336: MUFFLER GP

7N6336 MUFFLER GP
S/N 94Z3180-UP
c549120 SEBP1747
7N6336 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-0241 [1] PIPE  
2. 0S-1590 [1] BOLT  
3. 5M-2894 [4] WASHER  
4. 9S-8752 [4] NUT-FULL  
5. 5S-0580 [1] CLAMP  
6. 1W-9422 [1] STRAP  
7. 4P-4759 [1] SUPPORT AS  
8. 4L-6454 [4] BOLT  
9. 4P-4757 [1] MUFFLER AS  
10. 7N-0808 [1] CLAMP  
11. 8T-4896 [4] WASHER-HARD  
12. 0L-1352 [1] BOLT  
13. 9L-9132 [2] WASHER  
 

#SEBP17470082
 

8V-2509: INSTALLATION GP-CONTROLS

8V2509 INSTALLATION GP-CONTROLS-PART 1 OF 2
GOVERNOR & TRANSMISSION
S/N 94Z2209-2294
c461850 SEBP1747
8V2509 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8187 [3] NUT  
2. 8V-7943 [1] CABLE AS (SPEED)  
  5P-9298 C [1] CLIP  
3. 8V-7945 [1] CABLE AS (DIRECTION)  
4. 3K-5601 C [1] PIN-CLEVIS  
  3B-4615 [1] PIN-COTTER  
5. 8J-5839 [1] SPRING  
6. 8V-7944 [1] CABLE AS  
7. 5P-6438 [1] ROD END-YOKE  
8. 8V-1615 [1] GUIDE  
9. 8V-1614 [1] GUIDE  
10. 5P-9299 C [1] CLIP  
11. 0S-0509 [1] BOLT  
12. 5P-1075 [1] WASHER-HARD  
13. 6L-7751 [1] ROD END-BEARING  
14. 8V-1626 [1] COVER  
  8V-1625 [1] GASKET  
15. 9S-2010 C [6] SCREW-MACHINE  
16. 8V-1622 [1] HOUSING  
17. 4M-6425 [2] BOLT  
  9M-1974 [2] WASHER  
18. 8V-1623 [1] SEAL  
19. 8V-1624 [1] LEVER  
20. 4F-7957 [1] BOLT  
21. 6D-3479 [2] CLIP  
22. 5P-0537 [1] WASHER  
23. 8P-0660 [1] PLATE  
24. 2V-7859 [2] BEARING  
25. 1V-6341 [2] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17470083
 

8V-2509: INSTALLATION GP-CONTROLS

8V2509 INSTALLATION GP-CONTROLS-PART 2 OF 2
GOVERNOR & TRANSMISSION
S/N 94Z2209-2294
c336241 SEBP1747
8V2509 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-9062 C [1] BOLT  
2. 8V-2671 [1] SPACER  
3. 4D-4064 [1] ROD END  
4. 6V-8183 C [4] NUT-FULL  
5. 6W-4837 C [1] ROD (LIFT)  
6. 5P-1075 C [10] WASHER-HARD  
7. 3K-5601 C [2] PIN-CLEVIS  
  3B-4613 [2] COTTER  
8. 1A-2029 [6] BOLT  
9. 1A-9252 C [2] END-ADJUSTABLE ROD  
10. 6W-4838 C [1] ROD (TILT)  
11. 8V-4518 [2] BOOT  
12. 5J-5315 [1] ROD END  
13. 3K-9767 C [2] NUT-SELF LOCKING  
14. 9S-1303 [2] PIN  
  3B-4607 [2] COTTER  
15. 8B-3768 [1] ROD END-YOKE  
16. 1V-6341 [2] SEAL  
17. 5P-8247 [2] WASHER-HARD  
18. 6V-8187 C [2] NUT  
19. 5V-8377 [1] BRACKET  
20. 6W-5692 [1] BRACKET  
21. 4L-6454 C [4] BOLT  
22. 6W-5690 [1] END-YOKE  
23. 4F-7952 [2] SEAL-O-RING  
24. 9V-9514 [1] BRACKET AS  
25. 9V-9499 [1] SUPPORT AS  
  4V-7412 [1] BOSS  
26. 6W-5689 [1] SEAL  
27. 5C-8814 B [4] SEAL  
28. 4B-9806 [1] SETSCREW-SOCKET  
29. 6W-5688 [1] SLEEVE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17470084
 

8V-2509: INSTALLATION GP-CONTROLS

8V2509 INSTALLATION GP-CONTROLS-PART 1 OF 2
GOVERNOR & TRANSMISSION
S/N 94Z2295-3765
c499783 SEBP1747
8V2509 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8187 [3] NUT  
2. 8V-7943 [1] CABLE AS (SPEED)  
  5P-9298 [1] CLIP  
3. 8V-7945 [1] CABLE AS (DIRECTION)  
4. 3K-5601 [1] PIN-CLEVIS  
  3B-4615 [1] PIN-COTTER  
5. 8J-5839 [1] SPRING  
6. 9X-1147 [1] CABLE AS  
7. 5P-6438 [1] ROD END-YOKE  
8. 8V-1615 [1] GUIDE  
9. 8V-1614 [1] GUIDE  
10. 5P-9299 [1] CLIP  
11. 5M-3062 C [1] BOLT  
12. 5P-1075 [1] WASHER-HARD  
13. 6L-7751 [1] ROD END-BEARING  
14. 8V-1626 [1] COVER  
  8V-1625 [1] GASKET  
15. 9S-2010 [6] SCREW-MACHINE  
16. 8V-1622 [1] HOUSING  
17. 4M-6425 [2] BOLT  
  8T-4224 C [2] WASHER-HARD  
18. 8V-1623 [1] SEAL  
19. 8V-1624 [1] LEVER  
20. 1H-3337 C [1] BOLT  
21. 6D-3479 [2] CLIP  
22. 8T-4205 C [1] WASHER-HARD  
23. 8P-0660 [1] PLATE  
24. 2V-7859 [2] BEARING  
25. 1V-6341 [2] SEAL  
26. 8T-4122 [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17470085
 

8V-2509: INSTALLATION GP-CONTROLS

8V2509 INSTALLATION GP-CONTROLS-PART 2 OF 2
GOVERNOR & TRANSMISSION
S/N 94Z2295-3765
c464881 SEBP1747
8V2509 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-9062 [1] BOLT  
2. 8V-2671 [1] SPACER  
3. 4D-4064 [1] ROD END  
4. 6V-8183 [4] NUT-FULL  
5. 6W-4837 [1] ROD (LIFT)  
6. 5P-1075 [10] WASHER-HARD  
7. 3K-5601 [2] PIN-CLEVIS  
  3B-4613 [2] COTTER  
8. 1A-2029 [6] BOLT  
9. 1A-9252 [2] END-ADJUSTABLE ROD  
10. 6W-4838 [1] ROD (TILT)  
11. 8V-4518 [2] BOOT  
12. 5J-5315 [1] ROD END  
13. 3K-9767 [2] NUT-SELF LOCKING  
14. 9S-1303 [2] PIN  
  3B-4607 [2] COTTER  
15. 8B-3768 [1] ROD END-YOKE  
16. 1V-6341 [2] SEAL  
17. 8T-4122 C [2] WASHER  
18. 6V-8187 [2] NUT  
19. 5V-8377 [1] BRACKET  
20. 6W-5692 [1] BRACKET  
21. 4L-6454 [4] BOLT  
22. 9C-5230 C [1] END-YOKE  
23. 4F-7952 [2] SEAL-O-RING  
24. 9V-9514 [1] BRACKET AS  
25. 9V-9499 [1] SUPPORT AS  
  4V-7412 [1] BOSS  
26. 6W-5689 [1] SEAL  
27. 5C-8814 B [4] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17470086
 

8V-2509: INSTALLATION GP-CONTROLS

8V2509 INSTALLATION GP-CONTROLS-PART 1 OF 2
GOVERNOR & TRANSMISSION. S/N 94Z3766-UP
c559314 SEBP1747
8V2509 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8187 [3] NUT  
2. 8V-7943 [1] CABLE AS (SPEED)  
  5P-9298 [1] CLIP  
3. 8V-7945 [1] CABLE AS (DIRECTION)  
4. 3K-5601 [1] PIN-CLEVIS  
  3B-4615 [1] PIN-COTTER  
5. 8J-5839 [1] SPRING  
6. 9X-1147 [1] CABLE AS  
7. 5P-6438 [1] ROD END-YOKE  
8. 8V-1615 [1] GUIDE  
9. 6W-6662 C [1] GUIDE  
10. 5P-9299 [1] CLIP  
11. 5M-3062 [1] BOLT  
12. 5P-1075 [1] WASHER-HARD  
13. 6L-7751 [1] ROD END-BEARING  
14. 8V-1626 [1] COVER  
  8V-1625 [1] GASKET  
15. 9S-2010 [6] SCREW-MACHINE  
16. 8V-1622 [1] HOUSING  
17. 4M-6425 [2] BOLT  
  8T-4224 [2] WASHER-HARD  
18. 8V-1623 [1] SEAL  
19. 8V-1624 [1] LEVER  
20. 1H-3337 [1] BOLT  
21. 6D-3479 [2] CLIP  
22. 8T-4205 [1] WASHER-HARD  
23. 8T-4122 [2] WASHER  
24. 2V-7859 [2] BEARING  
25. 1V-6341 [2] SEAL  
26. 8P-0660 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17470087
 

8V-2509: INSTALLATION GP-CONTROLS

8V2509 INSTALLATION GP-CONTROLS-PART 2 OF 2
GOVERNOR & TRANSMISSION. S/N 94Z3766-UP
c560418 SEBP1747
8V2509 INSTALLATION GP-CONTROLS Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-9062 [1] BOLT  
2. 8V-2671 [1] SPACER  
3. 4D-4064 [1] ROD END  
4. 6V-8183 [4] NUT-FULL  
5. 6W-4837 [1] ROD (LIFT)  
6. 5P-1075 [11] WASHER-HARD  
7. 3K-5601 [2] PIN-CLEVIS  
  3B-4613 [2] COTTER  
8. 1A-2029 [6] BOLT  
9. 1A-9252 [2] END-ADJUSTABLE ROD  
10. 6W-4838 [1] ROD (TILT)  
11. 8V-4518 [2] BOOT  
12. 5J-5315 [1] ROD END  
13. 3K-9767 [2] NUT-SELF LOCKING  
14. 9S-1303 [2] PIN  
  3B-4607 [2] COTTER  
15. 8B-3768 [1] ROD END-YOKE  
16. 1V-6341 [2] SEAL  
17. 8T-4122 [2] WASHER  
18. 6V-8187 [2] NUT  
19. 5V-8377 [1] BRACKET  
20. 6W-5692 [1] BRACKET  
21. 4L-6454 [4] BOLT  
22. 9C-5230 [1] END-YOKE  
23. 4F-7952 [2] SEAL-O-RING  
24. 9V-9514 [1] BRACKET AS  
25. 9V-9499 [1] SUPPORT AS  
  4V-7412 [1] BOSS  
26. 6W-5689 [1] SEAL  
27. 5C-8814 B [4] SEAL  
  B   USE AS REQUIRED
 

#SEBP17470088
 

8V-1179: PEDAL GP-GOVERNOR

8V1179 PEDAL GP-GOVERNOR
c521805 SEBP1747
8V1179 PEDAL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-7859 C [2] BEARING  
2. 1B-8704 [1] KEY-WOODRUFF  
3. 3V-2425 [1] PEDAL-FOOT  
4. 8V-1612 [1] SHAFT  
5. 031-0216 C [4] BOLT  
6. 8T-4205 [5] WASHER-HARD (2MM THK)  
7. 8V-1597 [1] BAR  
8. 6V-6845 C [2] BOLT-SELF LOCKING (1/4-20X1.25)  
9. 8V-1596 [1] COVER AS  
  6P-0593 [1] BEARING-ROLLER  
10. 8V-1598 [1] GASKET  
11. 4M-6425 C [4] BOLT (5/16-18X1IN)  
12. 8V-1613 [1] LEVER  
13. 8V-1621 [1] HOUSING AS  
  6P-0593 [1] BEARING-ROLLER  
14. 7F-3531 C [1] BOLT  
15. 6V-8187 C [1] NUT (1/4-28 THD)  
16. 7X-3373 [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17470089
 

4W-4938: GOV & FUEL INJ PUMP GP

4W4938 GOVERNOR & FUEL INJECTION PUMP GP
4W0469-PAGE 58, 4W5063-PAGE 59, 7W1488-PAGE 56
c458071 SEBP1747
4W4938 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET  
  4B-2049 [1] NUT  
2. 7N-5334 [1] SETSCREW-SOCKET 25.4MM(1IN)LG  
  4B-2049 [1] NUT 3.18MM(.125IN)THK  
    -OR-
  5H-6552 C SETSCREW-SOCKET 31.75MM(1.25IN)LG  
  8L-5832 C [1] NUT-HEX 4.72MM(.186IN)THK  
3. 5P-6620 [1] SEAL-O-RING  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8M-8515 [1] SEAL-O-RING  
7. 4W-0469 Y [1] PUMP GP-FUEL INJECTION  
8. 9S-4180 [1] PLUG-O-RING  
9. 7N-2176 [1] PIN-DETENT  
  7N-1052 [1] DOWEL  
10. 2W-9657 [1] SPRING-DETENT  
11. 8N-3088 [1] SHAFT AS-THROTTLE  
12. 4W-5063 Y [1] TORQUE CONTROL GP  
13. 9M-3160 [1] SPRING-GOVERNOR  
14. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
15. 4F-7957 [6] BOLT  
16. 0S-1616 [2] BOLT  
17. 8N-3799 [1] COVER-FUEL RATIO  
18. 4J-7533 [1] SEAL-O-RING  
19. 8B-2377 [2] BOLT  
20. 9S-4191 [1] PLUG-O-RING  
  3J-1907 [1] SEAL  
21. 7N-9521 [1] COVER-FUEL GALLERY  
  7N-3104 [1] GASKET-BASE  
22. 8N-5783 [1] DEFLECTOR-PULSE  
  0S-1614 [2] BOLT  
23. 4N-1761 [4] BOLT  
24. 8F-8178 [2] BOLT  
25. 2S-7383 [1] BOLT  
26. 7N-8768 [1] GASKET  
27. 6B-4198 [2] BOLT  
28. 7W-1488 Y [1] GOVERNOR GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 926 :

MUFFLER GP
7W-1612 MUFFLER GP
LINES GP-AIR COMPRESSOR
104-8551 LINES GP-AIR COMPRESSOR
LINES GP-AIR COMPRESSOR
1W-5291 LINES GP-AIR COMPRESSOR
CYLINDER HEAD GP
6I-2121 CYLINDER HEAD GP
AIR COMPRESSOR GP
104-8017 AIR COMPRESSOR GP
AIR COMPRESSOR GP
104-8550 AIR COMPRESSOR GP
AIR COMPRESSOR GP
8N-2051 AIR COMPRESSOR GP
AIR COMPRESSOR GP
1W-5824 AIR COMPRESSOR GP
MUFFLER GP
7N-6336 MUFFLER GP
INSTALLATION GP-CONTROLS
8V-2509 INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
8V-2509 INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
8V-2509 INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
8V-2509 INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
8V-2509 INSTALLATION GP-CONTROLS
INSTALLATION GP-CONTROLS
8V-2509 INSTALLATION GP-CONTROLS
PEDAL GP-GOVERNOR
8V-1179 PEDAL GP-GOVERNOR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.