AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-6576 GOVERNOR GP S/N 4MG3600-48280 PART OF 7C-6605, 7C-6649, 7C-6650, 7C-6651, 9Y-1899, 9Y-3291, 9Y-3292, 9Y-3367, 9Y-3816, 9Y-4349 PUMP GP-GOV & FUEL INJ ALSO AN ATTACHMENT 3406B


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL INJECTION
FUEL SYSTEM GP
FILTER GP-FUEL

TRUCK ENGINE 3406B TRUCK ENGINE 4MG
 3406B Truck Engine 4MG03600-UP SEBP1755 3406B 4MG   (1987)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
9Y-1838 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
7C-6576 GOVERNOR GP
GOVERNOR GP
9Y-5633 GOVERNOR GP
PROTECTION GP-FUEL SYSTEM
7W-6074 PROTECTION GP-FUEL SYSTEM
PROTECTION GP-FUEL SYSTEM
9Y-5506 PROTECTION GP-FUEL SYSTEM
 

#SEBP17551060
 

7C-6576: GOVERNOR GP

7C-6576 GOVERNOR GP
S/N 4MG3600-48280
PART OF 7C-6605, 7C-6649, 7C-6650, 7C-6651, 9Y-1899, 9Y-3291, 9Y-3292, 9Y-3367, 9Y-3816, 9Y-4349 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00409459 SEBP1755
7C6576 GOVERNOR GP Parts scheme 7C6576 GOVERNOR GP Parts scheme 7C6576 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4272 [1] NUT-SEALING (5/16-18-THD)  
2. 4B-2049 [1] NUT (10-32-THD)  
3. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 [1] BOLT AS-SPECIAL (STOP)  
7. 6D-3897 [1] BOLT (8-32X0.5-IN)  
8. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
9. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
10. 7N-2594 [1] SETSCREW-SLOTTED  
11. 1N-3935 [1] COVER  
  8N-3765 [1] GASKET  
12. 3P-0009 [1] INSULATOR  
13. 6V-5029 [1] SEAL-LIP TYPE  
14. 8N-3762 [1] COVER  
  8N-3763 [1] GASKET  
15. 2N-5919 [2] BOLT (1/4-20X0.62-IN)  
16. 9S-8003 [2] PLUG (1/2-20-THD)  
  1J-9671 [2] SEAL-O-RING  
17. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
18. 5B-3180 [1] NUT (5/16-18-THD)  
19. 8N-3256 [1] COLLAR-LOAD STOP  
20. 2M-7819 [2] RING-RETAINING  
21. 4N-0432 [1] BALL BEARING  
22. 2W-2216 [1] SPRING-LINK  
23. 1N-3800 [1] SLEEVE-RACK CONTROL  
24. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
25. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  7C-0790 C [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
26. 5P-9757 [1] SEAL-O-RING  
27. 1W-4098 [1] PISTON-GOVERNOR SERVO  
28. 1N-3802 [1] SEAT-SPRING  
29. 1S-5440 [4] DOWEL  
30. 7M-7219 [1] BEARING-THRUST  
31. 5P-9087 [4] BOLT-12 POINT HEAD  
32. 4N-9019 [1] DOWEL  
33. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
34. 4N-2953 [1] RING-LOCK  
35. 4N-2927 [2] RACE-THRUST BEARING  
36. 7W-2707 C [1] CARRIER-WEIGHT  
37. 7N-7264 [4] WEIGHT-GOVERNOR  
38. 3K-5733 [1] SPRING  
39. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
40. 4W-6868 [1] RISER-GOVERNOR  
41. 7N-7270 [2] SLEEVE-SPRING  
42. 7W-4068 [1] ACTUATOR AS-GOVERNOR  
  7W-4067 [1] SPRING  
  7N-7268 [1] SEAT-SPRING  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
43. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
  2N-0828 [2] WASHER  
44. 6N-3504 [1] SEAT-GOVERNOR SPRING  
45. 7N-8821 [2] RING-RETAINING  
46. 1W-5342 [1] LEVER-SHUTOFF  
47. 7W-5330 [1] PISTON & LEVER AS  
48. 7W-5422 [1] LEVER AS-ROD  
  7W-4253 [1] PISTON  
  7W-5331 [1] SPRING  
  2H-3429 [1] RING-RETAINING  
49. 7W-4254 [1] LEVER AS  
50. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
51. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  4B-2049 [1] NUT (10-32-THD)  
52. 7W-4252 [1] SHAFT  
53. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
54. 8N-3760 [1] COVER  
  8N-3761 [1] GASKET  
  030-9615 [4] SCREW-NYLOK  
55. 7W-4182 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
56. 1W-5337 [1] SHAFT AS-CONTROL  
57. 2M-7819 [1] RING-RETAINING  
58. 2W-0800 [1] LEVER-SHUTOFF  
59. 2W-0799 [1] SPRING-SHUTOFF  
60. 2W-0801 [1] SHAFT  
61. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
62. 8N-9384 [1] GASKET  
63. 5H-2532 [1] KEY-WOODRUFF  
64. 2W-6102 [1] LEVER-SPRING SEAT  
65. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
66. 7W-7545 [1] HOUSING AS-GOVERNOR  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
67. 8N-2499 [1] SPRING-GUIDE  
68. 3D-8317 [1] RING-RETAINING  
69. 4N-0260 [1] SEAL-LIP TYPE  
70. 8T-2604 [1] SEAL-LIP TYPE  
71. 8N-3945 [1] BUSHING-TERMINAL  
72. 8S-7803 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17551061
 

9Y-5633: GOVERNOR GP

9Y-5633 GOVERNOR GP
S/N 4MG9771-99999
PART OF 4P-1669, 7E-3865, 9Y-5504 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00444068 SEBP1755
9Y5633 GOVERNOR GP Parts scheme 9Y5633 GOVERNOR GP Parts scheme 9Y5633 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4272 [1] NUT-SEALING (5/16-18-THD)  
2. 8L-5832 [1] NUT-HEX (10-32-THD)  
3. 9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 [1] BOLT AS-SPECIAL (STOP)  
7. 6D-3897 [1] BOLT (8-32X0.5-IN)  
8. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
9. 2A-5546 [1] BOLT (1/4-20X1.375-IN)  
10. 7N-2594 [1] SETSCREW-SLOTTED  
11. 9Y-5505 [1] COVER  
  144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
12. 3P-0009 [1] INSULATOR  
13. 8N-3256 [1] COLLAR-LOAD STOP  
14. 8N-3762 [1] COVER  
  144-0478 [1] GASKET  
15. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
16. 9S-8003 [2] PLUG (1/2-20-THD)  
  1J-9671 [2] SEAL-O-RING  
17. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
18. 5B-3180 [1] NUT (5/16-18-THD)  
19. 2M-7819 [2] RING-RETAINING  
20. 4N-0432 [1] BALL BEARING  
21. 2W-2216 [1] SPRING-LINK  
22. 1N-3800 [1] SLEEVE-RACK CONTROL  
23. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
24. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
  7C-0790 [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7W-0250 [1] SLEEVE  
25. 5P-9757 [1] SEAL-O-RING  
26. 1W-4098 [1] PISTON-GOVERNOR SERVO  
27. 1N-3802 [1] SEAT-SPRING  
28. 1S-5440 [4] DOWEL  
29. 7M-7219 [1] BEARING-THRUST  
30. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
31. 4N-9019 [1] DOWEL  
32. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
33. 4N-2953 [1] RING-LOCK  
34. 133-8890 [2] RACE-NEEDLE BEARING  
35. 7E-3986 [1] CARRIER-WEIGHT  
36. 119-8699 [4] WEIGHT-GOVERNOR  
37. 3K-5733 [1] SPRING  
38. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
39. 4W-6868 [1] RISER-GOVERNOR  
40. 7N-7270 [2] SLEEVE-SPRING  
41. 7W-4068 [1] ACTUATOR AS-GOVERNOR  
  7W-4882 [1] SPRING-DASHPOT  
  7N-7268 [1] SEAT-SPRING  
  1N-3861 [1] SHIELD-GOVERNOR SPRING  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
42. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
  2N-0828 [2] WASHER (SPRING)  
43. 6N-3504 [1] SEAT-GOVERNOR SPRING  
44. 7N-8821 [2] RING-RETAINING  
45. 1W-5342 [1] LEVER-SHUTOFF  
46. 4W-5735 [1] LEVER AS-PIVOT  
47. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
48. 4W-5734 [1] LEVER AS  
49. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
50. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
51. 4N-5621 [1] SHAFT-SHUTOFF  
52. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
53. 8N-3760 [1] COVER  
  8N-3761 [1] GASKET  
  030-9615 [4] SCREW-NYLOK  
54. 7W-7545 [1] HOUSING AS-GOVERNOR  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
55. 8N-2499 [1] SPRING-GUIDE  
56. 3D-8317 [1] RING-RETAINING  
57. 4N-0260 [1] SEAL-LIP TYPE  
58. 138-9507 [1] SEAL-LIP TYPE  
59. 8N-3945 [1] BUSHING-TERMINAL  
60. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
61. 144-0480 [1] GASKET  
62. 5H-2532 [1] KEY-WOODRUFF  
63. 2W-6102 [1] LEVER-SPRING SEAT  
64. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
65. 1W-5337 [1] SHAFT AS-CONTROL  
66. 2M-7819 [1] RING-RETAINING  
67. 2W-0800 [1] LEVER-SHUTOFF  
68. 2W-0799 [1] SPRING-SHUTOFF  
69. 2W-0801 [1] SHAFT  
70. 8S-7803 [1] RING-RETAINING  
71. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
72. 7W-4182 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
73. 6V-5029 [1] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17551062
 

4W-7018: INJECTOR GP-FUEL

4W-7018 INJECTOR GP-FUEL
PART OF 4W-2718 LINES GP-FUEL INJECTION
i00107977 SEBP1755
4W7018 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 [1] SCREW-BUTTON HEAD  
5. 114-3362 [1] SEAL-O-RING  
6. 1W-8791 [1] TIP AS-FUEL INJECTOR  
 

#SEBP17551063
 

425-6886: KIT-FUEL SYSTEM GASKET

425-6886 KIT-FUEL SYSTEM GASKET
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL ENGINE MOUNTED FUEL SYSTEM COMPONENETS. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
FIELD REPLACEMENT FOR @@@@@ 3E-3310@@@@@
i05351497 SEBP1755
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  6I-2002 [1] GASKET  
  8N-3761 [1] GASKET  
  144-0478 [1] GASKET  
  144-0480 [1] GASKET  
  144-0481 [1] GASKET  
  144-0482 [1] GASKET  
  8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
  144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [1] SEAL-LIP TYPE  
  1J-9671 [1] SEAL-O-RING  
  2N-3350 [1] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5P-5846 [1] SEAL-O-RING  
  5P-7813 [2] SEAL-O-RING  
  6V-3319 [1] SEAL-O-RING  
  8J-4351 [2] SEAL-O-RING  
  8L-2779 [6] SEAL-O-RING  
  109-3206 [1] SEAL-O-RING  
  109-9685 [1] SEAL-O-RING  
  117-1385 [6] SEAL-O-RING  
  131-3719 [6] SEAL-O-RING  
  214-7566 [1] SEAL-O-RING  
  214-7568 [9] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
  8H-2778 [1] SEAL-RING  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
   
    FOR A LIST OR RELATED PARTS THAT ARE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP17551064
 

7C-3558: KIT-FUEL SYSTEM PARTS

7C-3558 KIT-FUEL SYSTEM PARTS
FUEL TANK LINE FITTING. PROVIDES ELECTRICALLY HEATED FITTING FOR SUPPLY LINE CONNECTION TO FUEL TANK
FIELD INSTALLATION
i00525905 SEBP1755
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO BREAKDOWN OF SERVICEABLE PARTS IS AVAILABLE AT THIS TIME)
 

#SEBP17551065
 

4W-0167: LINES GP-FUEL FILTER

4W-0167 LINES GP-FUEL FILTER
i00168572 SEBP1755
4W0167 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7947 [2] ELBOW  
2. 2R-6806 [1] CONNECTOR  
3. 6V-5049 [6] SEAL-O-RING  
4. 7W-6158 I [1] HOSE AS  
5. 9N-5279 I [1] HOSE AS  
6. 4V-6698 [1] SPACER (10X16X16-MM THK)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 297-1546 [2] CLIP  
10. 6V-5048 [1] SEAL-O-RING  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 117-6482 [1] ELBOW  
13. 2M-4779 [2] STUD-TAPERLOCK (3/8-16X1.75-IN)  
14. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
15. 9S-4182 [1] PLUG (7/16-20-THD)  
16. 8T-2161 [1] ELBOW  
17. 2P-7214 [1] ELBOW  
18. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
19. 3S-2093 [1] STRAP-CABLE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP17551066
 

4W-3711: LINES GP-FUEL FILTER

4W-3711 LINES GP-FUEL FILTER
i00379091 SEBP1755
4W3711 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
2. 1W-1652 [1] BRACKET-FILTER  
3. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
4. 9S-8752 C [2] NUT-FULL (3/8-16-THD)  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 9L-6958 CI [1] HOSE AS  
7. 2R-6806 [2] CONNECTOR  
8. 3J-1907 C [6] SEAL-O-RING  
9. 8T-2160 C [1] ELBOW  
10. 8T-2161 C [1] ELBOW  
11. 9S-4182 [1] PLUG (7/16-20-THD)  
12. 3J-7354 [1] SEAL-O-RING  
13. 2P-7214 [1] ELBOW  
14. 9N-3370 CI [1] HOSE AS  
15. 4V-6698 C [1] SPACER (10X16X16-MM THK)  
16. 8M-2773 C [1] CLIP (LOOP)  
17. 030-7942 C [1] ELBOW  
18. 1B-7182 C [1] BOLT (5/16-18X1.25-IN)  
19. 9M-1974 C [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP17551067
 

4W-4049: LINES GP-FUEL FILTER

4W-4049 LINES GP-FUEL FILTER
i00379319 SEBP1755
4W4049 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-2627 [1] ELBOW  
2. 3J-1907 C [6] SEAL-O-RING  
3. 030-7947 [3] ELBOW  
4. 4W-6993 [1] BRACKET AS  
5. 9F-2978 [2] NUT-WELD (3/8-16-THD)  
6. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
7. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
9. 4W-8739 I [1] HOSE AS  
10. 4W-9576 I [1] HOSE AS  
11. 3J-7354 [1] SEAL-O-RING  
12. 9S-4182 [1] PLUG (7/16-20-THD)  
13. 2P-7214 [1] ELBOW  
14. 1W-3151 C [1] ELBOW  
15. 6J-0488 [1] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
16. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP17551068
 

7C-0172: LINES GP-FUEL FILTER

7C-0172 LINES GP-FUEL FILTER
FOR USE WITH @@@@@ 7W-0023@@@@@, HIGH MOUNTED FUEL FILTER
AN ATTACHMENT
i00396688 SEBP1755
7C0172 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7947 [3] ELBOW  
2. 2B-2694 [2] BOLT (5/16-18X2-IN)  
3. 3J-1907 [6] SEAL-O-RING  
4. 2P-7214 [1] ELBOW  
5. 4W-7079 I [2] HOSE AS  
6. 7W-7664 [1] BRACKET  
7. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 8S-0948 [1] CLIP  
10. 3J-7354 [1] SEAL-O-RING  
11. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8T-2160 [1] ELBOW  
13. 8T-2161 [1] ELBOW  
14. 1D-4717 [2] NUT (3/8-16-THD)  
15. 9S-4182 [1] PLUG (7/16-20-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP17551069
 

7C-6033: LINES GP-FUEL FILTER

7C-6033 LINES GP-FUEL FILTER
S/N 4MG70272-99999
PROVIDES HIGH MOUNT SECONDARY FUEL FILTER
ALSO AN ATTACHMENT
i00408712 SEBP1755
7C6033 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7947 [2] ELBOW  
2. 2R-6806 [1] CONNECTOR  
3. 6V-5049 [6] SEAL-O-RING  
4. 4W-7079 I [1] HOSE AS  
5. 8P-6604 I [1] HOSE AS  
6. 9S-4182 [1] PLUG (7/16-20-THD)  
7. 8T-2161 [1] ELBOW  
8. 2P-7214 [1] ELBOW  
9. 8S-0948 [1] CLIP  
10. 6V-5048 [1] SEAL-O-RING  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 117-6482 [1] ELBOW  
13. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

Information:

Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/23
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/17
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Special Instruction Available To Salvage Governor Housing
1985/07/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Fuel Transfer Pump Improved
1985/10/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/06/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/08/01
Orifice Screen Assembly Now Used For The Timing Advance Mechanism
1986/11/01
New Torque Control Group Used In Governor And Fuel Injection Pump Group
1986/12/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Valve Assembly And Washer Used In Fuel Transfer Pump Group
1990/01/01
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group
1990/05/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Governors Now Use New Low Mass Weight Carrier{1272}
1995/03/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Summary Of Changes To Timing Advance Drive Groups (Update){1272}
1997/02/24
Engine News
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 8N3945 Bushing In 8N9679 Governor Housing{1287}
Installation Of 8N3945 Bushing In 8N9679 Governor Housing{1287}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 7FB1-Up, 4MG1-Up, And 5KJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 3ZJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Governor Control Linkage
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Earlier)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Later)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Service Letter-China
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Automatic Timing Advance 7FB1-Up, 4MG1-4MG3599
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Orifice Screen Assembly Now Used For The Timing Advance Mechanism{1251,1272,1288,1292}
1986/10/20
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
New Torque Control Group Used In Governor And Fuel Injection Pump Group{1264}
1986/12/22
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Separate Grounding Of Throttle Limit Switch And Shutoff Solenoid Improves Component Reliability; New Throttle Limit Switch Used{1269,1155,1400}
1989/07/24
New Valve Assembly And Washer Used In Fuel Transfer Pump Group{1256}
1989/12/25
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group {1256}
1990/05/21
Fuel System Parts Information{1251,1264,1250}
1991/09/02
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Summary Of Changes To Timing Advance Drive Groups{1272}
1993/05/24
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

GOVERNOR GP
1N-3110 GOVERNOR GP
FITTING GP-FUEL LINES
7W-6973 FITTING GP-FUEL LINES
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
7C-5890 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
DRIVE GP-TACHOMETER
1W-9010 DRIVE GP-TACHOMETER
GOVERNOR GP
9Y-5633 GOVERNOR GP
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
425-6886 KIT-FUEL SYSTEM GASKET
7C-3558 KIT-FUEL SYSTEM PARTS
LINES GP-FUEL FILTER
4W-0167 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
4W-3711 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
4W-4049 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7C-0172 LINES GP-FUEL FILTER

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.