AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N-0164 MANIFOLD GP-EXHAUST S/N 08Z48595-99999 PART OF 7C-1426 ENGINE AR 160G MOTOR GRADER


AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-EXHAUST
MUFFLER GP
TURBOCHARGER GP
FUEL SYSTEM
CAMSHAFT AS
CONTROL GP-GOVERNOR
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
PUMP GP-FUEL INJECTION

MOTOR GRADER 160G MOTOR GRADER 4JD
 160G Motor Grader 4JD00141-UP (MACHINE) POWERED BY 3306 Engine SEBP1760 160G 4JD   (1986)

AIR INLET AND EXHAUST SYSTEM

MANIFOLD GP-EXHAUST
FASTENER GP-EXHAUST MANIFOLD
1W-4486 FASTENER GP-EXHAUST MANIFOLD
FASTENER GP-EXHAUST MANIFOLD
1W-4486 FASTENER GP-EXHAUST MANIFOLD
MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
 

#SEBP17600090
 

6N-0164: MANIFOLD GP-EXHAUST

6N-0164 MANIFOLD GP-EXHAUST
S/N 08Z48595-99999
PART OF 7C-1426 ENGINE AR
i00122210 SEBP1760
6N0164 MANIFOLD GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3486 [1] MANIFOLD-EXHAUST  
2. 9Y-1979 C [3] GASKET-MANIFOLD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17600091
 

4N-8296: MUFFLER GP

4N-8296 MUFFLER GP
S/N 4JD141-99999
PART OF 7W-7140 INSTALLATION AR-ENGINE
i00122087 SEBP1760
4N8296 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-3249 [1] MUFFLER AS  
2. 7N-1087 [1] CLAMP  
3. 0S-1619 C [1] BOLT (3/8-16X3IN)  
  1B-5355 [1] NUT-FULL (3/8-16THD)  
  5M-2894 C [2] WASHER (2.5MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17600092
 

1N-3079: TURBOCHARGER GP

1N-3079 TURBOCHARGER GP
S/N 08Z36205-99999
PART OF 7C-1426 ENGINE AR
i00146474 SEBP1760
1N3079 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9247 Y [1] TURBOCHARGER GP  
2. 1P-0451 [1] GASKET  
3. 7L-6443 C [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
4. 2N-2766 C [4] LOCKNUT (3/8-16-THD)  
5. 9L-2295 C [2] BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17600093
 

8N-9247: TURBOCHARGER GP

8N-9247 TURBOCHARGER GP
S/N 08Z36205-99999
PART OF 1N-3079 TURBOCHARGER GP
i00146544 SEBP1760
8N9247 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7746 [1] HOUSING-COMPRESSOR  
2. 1P-0715 [4] PLATE-CLAMP  
3. 0S-1614 [8] BOLT (1/4-20X0.5-IN)  
  3B-4504 [8] LOCKWASHER  
4. 7N-7750 Y [1] CARTRIDGE GP-TURBOCHARGER  
5. 6N-1521 [1] HOUSING  
6. 6N-1523 [2] LOCK  
  6N-1522 [2] PLATE-CLAMP  
7. 6N-2145 [4] BOLT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17600094
 

2W-0255: CAMSHAFT AS

2W-0255 CAMSHAFT AS
S/N 08Z36205-99999
PART OF 2W-0256 PUMP GP-FUEL INJECTION
i00122033 SEBP1760
2W0255 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
2. 7N-7264 [4] WEIGHT-GOVERNOR  
3. 9Y-7037 [4] BOLT  
4. 1S-5440 [4] DOWEL  
5. 4N-9019 [1] DOWEL  
6. 8N-2511 [1] CARRIER-WEIGHT  
7. 2W-0254 [1] CAMSHAFT-FUEL PUMP  
8. 7N-7166 [2] RACE-THRUST BEARING  
9. 7L-3326 [1] BEARING-THRUST  
10. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
 

#SEBP17600095
 

8W-1990: CONTROL GP-GOVERNOR

8W-1990 CONTROL GP-GOVERNOR
S/N 4JD141-99999
PART OF 8W-4305 CHASSIS AR
i00145662 SEBP1760
8W1990 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
2. 6V-8801 [2] NUT (3/8-16-THD)  
3. 8D-5126 [1] SHAFT  
4. 4D-2498 [1] LEVER  
5. 1B-8704 [2] KEY-WOODRUFF  
6. 6V-5782 [2] BOLT (5/16-18X1.125-IN)  
7. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
8. 4M-5280 [2] NUT-PLATED FULL (5/16-18-THD)  
9. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
10. 8D-6174 [1] BRACKET AS  
11. 7H-1051 [1] BUSHING-TERMINAL  
12. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
13. 1B-4202 [2] NUT (5/16-24-THD)  
14. 3D-9609 [1] ROD END  
15. 1A-2457 [1] PIN-CLEVIS  
  3B-4607 [1] PIN-COTTER  
16. 8D-5996 [1] LEVER  
17. 6Y-7966 [1] DISC-FRICTION  
18. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
20. 0L-0821 [1] SEAT-SPRING  
21. 5D-0998 [6] SPRING-DISC  
22. 3S-1349 [1] WASHER-HARD (31X52.5X6-MM THK)  
23. 009-3161 [1] NUT  
24. 7H-3641 [1] END-ROD (5/16-24-THD)  
25. 6G-3505 [1] HANDLE AS  
  4F-8686 [1] BUSHING  
26. 4V-0627 [1] ROD  
27. 0L-0829 [1] HANDLE  
28. 4H-9304 [1] STUD-TAPERLOCK  
29. 1B-2578 [2] NUT (3/8-16-THD)  
30. 8W-3589 [1] LINK AS-SPRING  
  7D-9212 [1] SPRING (11.1CM LG)  
  2S-1382 [1] SPRING (5.0CM LG)  
  4F-9503 [1] SPRING (4.8CM LG)  
31. 4M-5280 [1] NUT-PLATED FULL (5/16-18-THD)  
  8C-3121 [1] BOLT (5/16-18X1.5-IN)  
32. 8D-4119 [1] LEVER  
33. 1B-0676 [2] PIN  
  3B-4615 [2] PIN-COTTER  
34. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
35. 1B-4203 [2] NUT-FULL (3/8-24-THD)  
36. 3D-9806 [1] ROD-CONTROL  
37. 7X-0343 [1] BOLT (5/8-11X1.25-IN)  
38. 1F-5403 [2] ROD END-ADJUSTABLE  
39. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
  6V-8801 [1] NUT (3/8-16-THD)  
40. 4L-6454 [6] BOLT (3/8-16X1-IN)  
41. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
42. 9D-0148 [1] CABLE  
43. 8D-9973 [1] HOUSING  
44. 9D-0246 [1] BRACKET AS  
45. 9F-2978 [3] NUT-WELD (3/8-16-THD)  
46. 8T-5390 [3] BOLT (3/8-16X3.5-IN)  
47. 7K-2135 [1] BEARING-ROLLER  
48. 5T-3475 [1] SHAFT  
49. 4J-2667 [1] BEARING AS-NEEDLE  
50. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
51. 9D-0194 [1] LEVER  
52. 1B-8704 [2] KEY-WOODRUFF  
53. 7H-3641 [1] END-ROD (5/16-24-THD)  
  1B-4202 [1] NUT (5/16-24-THD)  
54. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
  3F-9556 [1] LOCKWASHER  
55. 5H-0745 [1] LEVER-GOVERNOR CONTROL  
56. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
57. 9M-7783 [1] SPACER (0.65X1.188X0.81-IN THK)  
58. 7X-0345 [1] BOLT (5/8-11X1.75-IN)  
59. 4L-8183 [1] SPACER (0.656X1.125X0.38-IN THK)  
60. 7H-3641 [3] END-ROD (5/16-24-THD)  
  1B-4202 [3] NUT (5/16-24-THD)  
61. 6V-5782 [1] BOLT (5/16-18X1.125-IN)  
  4M-5280 [1] NUT-PLATED FULL (5/16-18-THD)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
62. 8W-0317 [1] LEVER  
63. 1B-8704 [2] KEY-WOODRUFF  
64. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
65. 8D-5119 [1] SHAFT  
66. 7K-2135 [1] BEARING-ROLLER  
67. 4J-2667 [1] BEARING AS-NEEDLE  
68. 9D-0145 [1] LEVER  
69. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
  3F-9556 [1] LOCKWASHER  
70. 8D-9973 [1] HOUSING  
71. 1F-7958 [3] NUT-FULL (1/2-13-THD)  
72. 4H-2186 [1] TREADLE AS  
  2M-6835 [1] PIPE  
73. 8T-5390 [3] BOLT (3/8-16X3.5-IN)  
74. 8X-6935 [1] TREADLE AS  
75. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
76. 4L-6454 [6] BOLT (3/8-16X1-IN)  
77. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
78. 8T-9375 [1] BOLT (3/8-16X1.75-IN)  
79. 1B-2578 [3] NUT (3/8-16-THD)  
80. 8W-0328 [1] CYLINDER-DAMPER  
81. 2N-2766 [1] LOCKNUT (3/8-16-THD)  
82. 8T-1760 [1] CLIP  
83. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
  8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
84. 6V-8801 [1] NUT (3/8-16-THD)  
85. 4M-0495 [1] ROD END  
86. 8X-2092 [2] NUT  
 

#SEBP17600096
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 08Z36205-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
i00122287 SEBP1760
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT (1/4-20X2-IN)  
2. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
3. 9S-4191 [1] PLUG  
4. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
5. 4F-7957 C [8] BOLT (1/4-20X0.875-IN)  
6. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
7. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
8. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17600097
 

2W-3282: FILTER GP-SECONDARY FUEL

2W-3282 FILTER GP-SECONDARY FUEL
S/N 08Z36205-99999
PART OF 7C-1426 ENGINE AR
i00122038 SEBP1760
2W3282 FILTER GP-SECONDARY FUEL Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9519 [1] BASE AS-FUEL FILTER  
2. 5M-6214 [1] PLUG-PIPE  
3. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 9S-4191 [1] PLUG  
  3J-1907 [1] SEAL-O-RING  
5. 4W-9057 C [1] TUBE AS  
6. 030-7947 [1] ELBOW  
7. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 7N-9520 [1] GASKET  
9. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
10. 5P-4289 [1] ELBOW  
11. 3J-1907 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17600098
 

7W-1488: GOVERNOR GP

7W-1488 GOVERNOR GP
S/N 08Z36205-99999
PART OF 2W-0258 PUMP GP-GOV & FUEL INJ
i00145494 SEBP1760
7W1488 GOVERNOR GP Parts scheme 7W1488 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT (8-32X0.5-IN)  
2. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
3. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 2W-5161 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 8L-5832 C [1] NUT-HEX (10-32-THD)  
8. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
9. 8N-3258 [1] COVER-LOAD STOP  
  6I-2004 [1] GASKET  
10. 1P-2497 [2] BOLT-HEAD  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
11. 3P-0009 [1] INSULATOR  
12. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
13. 4N-5485 [1] BODY-VALVE  
14. 4N-5484 [1] VALVE-NEEDLE  
15. 6H-9691 [1] SEAL-O-RING  
16. 5F-9144 [1] SEAL-O-RING  
17. 1W-6523 [1] PLUG  
18. 8N-3259 [1] COVER-HIGH IDLE  
  6I-2003 [1] GASKET  
19. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 3J-7354 [1] SEAL-O-RING  
21. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
22. 7N-8780 [1] COVER AS-CONTROL  
23. 5P-3272 [1] SEAL-LIP TYPE  
24. 150-3728 [1] GASKET  
25. 8N-2501 [1] HOUSING AS-GOVERNOR (REAR)  
  7E-5346 [1] VALVE AS  
  2F-2290 [1] PLUG-CORE  
  8N-3945 [1] BUSHING-TERMINAL  
26. 4N-0260 [1] SEAL-LIP TYPE  
27. 3D-8317 [1] RING-RETAINING  
28. 8N-2499 [1] SPRING-GUIDE  
29. 7N-8821 [1] RING-RETAINING  
30. 7W-2000 C [1] STOP-DETENT  
31. 6V-8137 [2] SCREW-BUTTON HEAD (10-24X1-IN)  
  7W-1318 [1] PLATE-RETAINING  
32. 2W-7400 [1] SPRING  
33. 2W-9996 [1] SCREW-IDLE STOP (1/4-20X1.25-IN)  
  7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
34. 150-3730 [1] GASKET  
35. 1N-3800 [1] SLEEVE-RACK CONTROL  
36. 6N-3504 [1] SEAT-GOVERNOR SPRING  
37. 2W-2216 [1] SPRING-LINK  
38. 2M-7819 [2] RING-RETAINING  
39. 1N-3802 [1] SEAT-SPRING  
40. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 C [1] CYLINDER AS  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
41. 1W-4098 [1] PISTON-GOVERNOR SERVO  
42. 7W-0250 C [1] SLEEVE  
43. 5P-9757 [1] SEAL-O-RING  
44. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
45. 4N-2953 [1] RING-LOCK  
46. 7E-4892 [2] RACE-THRUST BEARING  
47. 7M-7219 [1] BEARING-THRUST  
48. 4W-6868 [1] RISER-GOVERNOR  
49. 4N-0432 [1] BALL BEARING  
50. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM LG)  
  4F-6024 [2] PIN (8MM LG)  
51. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
52. 4N-6404 [1] RING-RETAINING  
53. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
54. 2N-0828 [2] WASHER  
55. 7N-8785 [1] SHAFT-PIVOT  
56. 7N-8821 [2] RING-RETAINING  
57. 7N-7270 [2] SLEEVE-SPRING  
58. 3K-5733 [1] SPRING  
59. 7N-7267 [1] SPRING  
60. 2W-9305 [1] PLATE-THROTTLE  
61. 7W-1321 [1] PLATE-THROTTLE  
62. 8N-3168 [1] LEVER-THROTTLE  
63. 2W-6102 [1] LEVER-SPRING SEAT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17600099
 

1W-3487: HOUSING GP-FUEL PUMP

1W-3487 HOUSING GP-FUEL PUMP
S/N 08Z36205-99999
PART OF 2W-0256 PUMP GP-FUEL INJECTION
i00144986 SEBP1760
1W3487 HOUSING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2518 [1] BEARING-SLEEVE  
2. 1S-1953 [1] BEARING-RACK  
3. 7N-7969 [6] DOWEL  
4. 1W-3285 [1] BEARING-RACK  
5. 4P-8480 [6] PIN-PUMP GUIDE  
6. 7N-7970 [1] BEARING-SLEEVE  
 

Information:

Disassembly and Assembly
Exhaust Manifold - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 160G :

MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
LINES GP-AIR
7N-4149 LINES GP-AIR
LINES GP-AIR
1W-1010 LINES GP-AIR
FASTENER GP-EXHAUST MANIFOLD
1W-4486 FASTENER GP-EXHAUST MANIFOLD
FASTENER GP-EXHAUST MANIFOLD
1W-4486 FASTENER GP-EXHAUST MANIFOLD
EXTENSION GP-EXHAUST
4N-8298 EXTENSION GP-EXHAUST
DUST EJECTOR GP
4N-8299 DUST EJECTOR GP
CARTRIDGE GP-TURBOCHARGER
7N-7750 CARTRIDGE GP-TURBOCHARGER
MUFFLER GP
4N-8296 MUFFLER GP
TURBOCHARGER GP
1N-3079 TURBOCHARGER GP
TURBOCHARGER GP
8N-9247 TURBOCHARGER GP
CAMSHAFT AS
2W-0255 CAMSHAFT AS
CONTROL GP-GOVERNOR
8W-1990 CONTROL GP-GOVERNOR
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
GOVERNOR GP
7W-1488 GOVERNOR GP

Truck sale:

 
USD $70,277 
1989 CAT 160G

BIG MACHINERY BV
Velddriel, The Netherlands
1989 CAT 160G
USD $70,041 
1989 CAT 160G

BIG MACHINERY BV
Velddriel, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.