AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9T-2554 CYLINDER GP-SCARIFIER S/N 4JD141-99999 76.2 MM (3.0 IN) BORE X 406.5 MM (16.0 IN) STROKE PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER AN ATTACHMENT 160G


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
LEVER GP

MOTOR GRADER 160G MOTOR GRADER 4JD
 160G Motor Grader 4JD00141-UP (MACHINE) POWERED BY 3306 Engine SEBP1760 160G 4JD   (1986)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-CENTERSHIFT
9T-2549 CYLINDER GP-CENTERSHIFT
CYLINDER GP-LIFT
9T-2472 CYLINDER GP-LIFT
CYLINDER GP-SCARIFIER
9T-2554 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
9T-6951 CYLINDER GP-SCARIFIER
CYLINDER GP-SIDESHIFT
9T-2483 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
105-2094 CYLINDER GP-SIDESHIFT
 

#SEBP17600290
 

9T-2554: CYLINDER GP-SCARIFIER

9T-2554 CYLINDER GP-SCARIFIER
S/N 4JD141-99999
76.2 MM (3.0 IN) BORE X 406.5 MM (16.0 IN) STROKE
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
AN ATTACHMENT
i00145852 SEBP1760
9T2554 CYLINDER GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2664 [1] CYLINDER AS  
2. 6V-5845 M [1] BOLT (M20X2.5X70MM)  
3. 8T-3282 [1] WASHER-HARD (3.5MM THK)  
4. 9T-2369 [1] PISTON  
5. 1H-7339 J [1] SEAL-O-RING (75.79MM ID)  
6. 6J-5731 CJ [1] RING-BACKUP  
7. 9T-2449 [1] ROD AS  
8. 4J-8980 J [1] SEAL-LIP  
9. 5J-8175 J [1] SEAL-U-CUP (43.15MM ID)  
10. 6J-9178 J [1] SEAL-RING  
11. 4T-6907 J [1] RING-WEAR  
12. 6J-1972 [1] SEAL AS  
13. 6J-5733 J [1] RING-WEAR  
14. 9T-2373 [1] HEAD  
   
    AVAILABLE REPAIR KIT(S):
  8T-6390 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES SEAL, EXPANDER RING & PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP17600291
 

9T-6951: CYLINDER GP-SCARIFIER

9T-6951 CYLINDER GP-SCARIFIER
S/N 4JD141-99999
76.2 MM (3.0 IN) BORE X 406.5 MM (16.0 IN) STROKE. (CHGS 00-04)
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
AN ATTACHMENT
i00122886 SEBP1760
9T6951 CYLINDER GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2664 [1] CYLINDER AS  
2. 6V-8133 M [1] BOLT (M24X3.0X80MM)  
3. 6V-8237 [1] WASHER (4.0MM THK)  
4. 9T-4211 [1] PISTON  
5. 1H-7339 [1] SEAL-O-RING (75.79MM ID)  
6. 6J-5731 [1] RING-BACKUP  
7. 9T-4213 [1] ROD AS  
8. 8C-9132 [1] SEAL-LIP (44.45MM ID)  
9. 5J-8175 [1] SEAL-U-CUP (43.15MM ID)  
10. 8C-9123 [1] SEAL AS  
11. 4T-6907 [1] RING-WEAR  
12. 6J-1972 [1] SEAL AS  
13. 6J-5733 [1] RING-WEAR  
14. 6E-4948 [1] HEAD  
15. 1L-4775 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  7X-2825 [4] KIT-SEAL  
    (INCLUDES SEALS & RINGS)
  M   METRIC PART
 

#SEBP17600292
 

9T-2483: CYLINDER GP-SIDESHIFT

9T-2483 CYLINDER GP-SIDESHIFT
S/N 4JD141-185
76.20 MM (2.86 IN) BORE X 1193.80 MM (47.00 IN) STROKE. (CHGS 00-06)
PART OF 8W-2889 CYLINDER & MTG GP-SIDESHIFT
i00145850 SEBP1760
9T2483 CYLINDER GP-SIDESHIFT Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2482 [1] CYLINDER AS  
2. 6V-5845 M [1] BOLT (M20X2.5X70MM)  
3. 8T-3282 C [1] WASHER-HARD (3.5MM THK)  
4. 9T-2369 [1] PISTON  
5. 1H-7339 [1] SEAL-O-RING (75.79MM ID)  
6. 6J-5731 C [1] RING-BACKUP  
7. 9T-2478 [1] ROD AS  
8. 8C-9132 [1] SEAL-LIP (44.45MM ID)  
9. 5J-8175 [1] SEAL-U-CUP (43.15MM ID)  
10. 8C-9123 [1] SEAL AS  
11. 4T-6907 [1] RING-WEAR  
12. 6E-4948 [1] HEAD  
13. 6J-5733 [1] RING-WEAR  
14. 6J-1972 [1] SEAL AS  
15. 1L-4775 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  7X-2825 C [1] KIT-SEAL  
    (INCLUDES SEALS,EXPANDER RING,WEAR RINGS,SEAL-U-CUP, SEAL-O-RINGS,& BACK-UP RINGS)
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP17600293
 

105-2094: CYLINDER GP-SIDESHIFT

105-2094 CYLINDER GP-SIDESHIFT
S/N 4JD186-99999
76.02 MM (3.00 IN) BORE X 1193.80 MM (47.00 IN) STROKE. (CHG 00)
PART OF 8W-2889 CYLINDER & MTG GP-SIDESHIFT
i00145879 SEBP1760
1052094 CYLINDER GP-SIDESHIFT Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 398-3644 [1] CYLINDER AS  
2. 173-9779 M [1] BOLT (M24X3X80-MM)  
3. 6V-8237 [1] WASHER (26X44X4-MM THK)  
4. 9T-4211 [1] PISTON  
5. 175-7896 [1] SEAL-O-RING  
6. 6J-5731 [1] RING-BACKUP  
7. 105-2095 [1] ROD AS  
8. 184-9843 [1] HEAD  
9. 308-1880 [1] SEAL-WIPER  
10. 351-8628 [1] SEAL-U-CUP  
11. 167-2190 [1] SEAL AS-BUFFER  
12. 4T-6907 [1] RING-WEAR  
13. 6J-5733 [1] RING-WEAR  
14. 6J-1972 [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  185-7025 [1] KIT-SEAL (CYLINDER)  
    (INCLUDES RINGS & SEALS)
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP17600294
 

9T-2393: CYLINDER GP-STEERING

9T-2393 CYLINDER GP-STEERING -RH
S/N 4JD141-99999
57.15-MM (2.25-IN) BORE X 267-MM (10.5-IN) STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00122869 SEBP1760
9T2393 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2392 [1] CYLINDER AS (RH)  
  005-8639 [1] BEARING-ALIGNING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 8C-9122 [1] SEAL AS  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 8C-9131 [1] SEAL-LIP TYPE  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 J [1] SEAL-O-RING  
14. 1N-5999 [1] PLUG-O-RING  
15. 7J-0204 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 J [1] KIT-HYD CYLINDER SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  J   KITS MARKED J INCLUDE PARTS MARKED J
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP17600295
 

9T-2395: CYLINDER GP-STEERING

9T-2395 CYLINDER GP-STEERING -LH
S/N 4JD141-99999
57.15 MM BORE X 267.00 MM STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i00122870 SEBP1760
9T2395 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2394 [1] CYLINDER AS (LH)  
  005-8639 [1] BEARING-ALIGNING  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 C [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2388 [1] PISTON  
5. 1U-3998 J [1] SEAL AS  
6. 7H-2423 J [1] RING-WEAR  
7. 9T-2387 [1] ROD AS  
8. 9T-3727 [1] HEAD  
9. 8C-9122 [1] SEAL AS  
10. 5J-8150 J [1] SEAL-U-CUP  
11. 8C-9131 [1] SEAL-LIP TYPE  
12. 4J-9225 JC [1] RING-BACKUP  
13. 5H-8848 J [1] SEAL-O-RING  
14. 1N-5999 [1] PLUG-O-RING  
15. 7J-0204 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  8T-6397 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  J  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP17600296
 

9T-2520: CYLINDER GP-WHEEL LEAN

9T-2520 CYLINDER GP-WHEEL LEAN
S/N 4JD141-99999
88.90 MM(3.50 IN) BORE X 149.00 MM(5.87 IN) STROKE. (CHGS 00-09)
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i00122871 SEBP1760
9T2520 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2521 [1] CYLINDER AS  
  2G-8631 [1] BEARING-SLEEVE  
2. 6V-5845 M [1] BOLT (M20X2.5X70-MM)  
3. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 9T-2524 [1] PISTON  
5. 5J-7013 [1] SEAL AS  
6. 7J-9885 [1] RING-WEAR  
7. 4T-6780 [1] RING-WEAR  
8. 8C-9122 [1] SEAL AS  
9. 5J-8150 [1] SEAL-U-CUP  
10. 8C-9131 [1] SEAL-LIP TYPE  
11. 9T-2525 [1] ROD AS  
  2G-8631 [1] BEARING-SLEEVE  
12. 6E-4939 [1] HEAD  
13. 4J-9224 [1] RING-BACKUP  
14. 2H-4145 [1] SEAL-O-RING  
15. 006-8663 [1] RING  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP17600297
 

6G-1925: DRIVE GP-CIRCLE

6G-1925 DRIVE GP-CIRCLE
S/N 4JD141-147
PART OF 8W-4295 BLADE AR
i00145272 SEBP1760
6G1925 DRIVE GP-CIRCLE Parts scheme 6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5407 Y [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 3B-4508 [12] LOCKWASHER  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
  3B-4508 [4] LOCKWASHER  
17. 6G-1908 [1] HOUSING AS-DRIVE  
  8D-9804 [1] HOUSING-DRIVE  
18. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
19. 8D-7426 [1] BUSHING  
20. 4D-7246 [4] STUD-TAPERLOCK  
21. 6G-5051 [1] PINION-CIRCLE REVERSE  
22. 5F-5434 [1] VALVE AS-VENT  
23. 8D-7174 [1] COVER AS  
24. 8D-7173 [1] BUSHING  
25. 5H-4909 [1] SEAL-O-RING  
26. 0S-1625 [9] BOLT (5/8-11X2.5-IN)  
  3K-2889 [9] LOCKNUT (5/8-11-THD)  
  2S-5658 [9] WASHER-HARD (17X29X3-MM THK)  
27. 8D-5344 [1] GEAR-WORM (36-TEETH)  
28. 1D-4609 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
29. 5K-5288 [1] SEAL GP-DUO-CONE  
30. 5K-5129 [2] RING-SEALING  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 8D-7427 [1] SHAFT-DRIVE PINION  
33. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
34. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
35. 5P-6652 [4] WASHER (20X44.5X6-MM THK)  
36. 4F-9653 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17600298
 

6G-1925: DRIVE GP-CIRCLE

6G-1925 DRIVE GP-CIRCLE
S/N 4JD148-99999
PART OF 8W-4295 BLADE AR
i00145273 SEBP1760
6G1925 DRIVE GP-CIRCLE Parts scheme 6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5976 YC [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
6. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
  7D-8984 B [6] SHIM (0.007-IN THK)  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
16. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6G-1908 [1] HOUSING AS-DRIVE  
  8D-9804 [1] HOUSING-DRIVE  
18. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
19. 8D-7426 [1] BUSHING  
20. 4D-7246 [4] STUD-TAPERLOCK  
21. 8W-5092 [1] PINION-CIRCLE DRIVE  
22. 5F-5434 [1] VALVE AS-VENT  
23. 8D-7174 [1] COVER AS  
24. 8D-7173 [1] BUSHING  
25. 5H-4909 [1] SEAL-O-RING  
26. 5B-6891 [9] BOLT-SPECIAL  
  2K-4821 [9] LOCKNUT (5/8-18-THD)  
  2S-5658 [9] WASHER-HARD (17X29X3-MM THK)  
27. 8D-5344 [1] GEAR-WORM (36-TEETH)  
28. 9X-8887 [2] BOLT (3/4-10X3-IN)  
  7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
29. 5K-5288 [1] SEAL GP-DUO-CONE  
30. 5K-5129 [2] RING-SEALING  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 8D-7427 [1] SHAFT-DRIVE PINION  
33. 1A-1415 [1] NUT (1-7/8-12-THD)  
  8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
  8D-7424 [1] SPACER (48X81X6-MM THK)  
34. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
35. 5P-8248 C [4] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 4F-9653 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17600299
 

9T-4917: LEVER GP

9T-4917 LEVER GP
S/N 4JD141-99999
PART OF 6E-3173, 9T-0110, 9T-1869, 9T-1876, 9T-5019, 9T-5020 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00145861 SEBP1760
9T4917 LEVER GP Parts scheme
  For full view, you need register

Parts for your 160G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-4121 [1] HOUSING  
2. 4T-5795 [2] BEARING  
3. 4T-5945 [1] RING  
4. 9T-4685 B [3] SHIM (0.12-MM THK)  
5. 9T-4697 [1] BOOT  
6. 9T-4916 [1] LEVER  
7. 8T-0269 M [2] BOLT-SOCKET HEAD (M6X1X20-MM)  
8. 9T-4683 [1] COVER  
9. 9T-4684 [1] HOUSING  
10. 6V-5391 [1] SEAL-O-RING  
11. 3S-9233 [1] SEAL-O-RING  
12. 5P-5874 [1] SEAL-O-RING  
13. 9H-6761 [1] SEAL-O-RING  
14. 8T-0334 [2] WASHER-HARD (6.6X12.5X1.6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 160G :

CYLINDER GP-LIFT
9T-2472 CYLINDER GP-LIFT
CYLINDER GP-CENTERSHIFT
9T-2549 CYLINDER GP-CENTERSHIFT
CYLINDER GP-BLADE TIP
9T-2461 CYLINDER GP-BLADE TIP
CYLINDER GP-BLADE TIP
9T-2461 CYLINDER GP-BLADE TIP
CYLINDER GP-BLADE TIP
6E-1549 CYLINDER GP-BLADE TIP
CYLINDER GP-ARTICULATION
9T-8784 CYLINDER GP-ARTICULATION
CYLINDER GP-ARTICULATION
9T-2453 CYLINDER GP-ARTICULATION
CYLINDER & MTG GP-WHEEL LEAN
8W-2737 CYLINDER & MTG GP-WHEEL LEAN
CYLINDER GP-SCARIFIER
9T-6951 CYLINDER GP-SCARIFIER
CYLINDER GP-SIDESHIFT
9T-2483 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
105-2094 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
9T-2393 CYLINDER GP-STEERING
CYLINDER GP-STEERING
9T-2395 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
9T-2520 CYLINDER GP-WHEEL LEAN
DRIVE GP-CIRCLE
6G-1925 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
6G-1925 DRIVE GP-CIRCLE

Truck sale:

 
USD $70,277 
1989 CAT 160G

BIG MACHINERY BV
Velddriel, The Netherlands
1989 CAT 160G
USD $70,041 
1989 CAT 160G

BIG MACHINERY BV
Velddriel, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.