7J9223 CYLINDER GP-LIFT-(CHG 1-9)-2 REQUIRED 88.9MM (3.50IN) BORE X 351.7MM (13.85IN) STROKE BULLDOZER S/N 2YH1-UP, 4GH1-UP PART OF 6Y2824 & 6Y2825 BULLDOZER ARS AN ATTACHMENT D4C

HYDRAULIC SYSTEM

CYLINDER GP

0. 7J-9223 CYLINDER G
1. 9J-8698 CYLINDER G
2. 9J-8674 CYLINDER G
3. 7J-9920 CYLINDER G
4. 7J-9920 CYLINDER G

LINES GP-PUMP

5. 8Y-0247 LINES GP-P
6. 8Y-0247 LINES GP-P

LINES GP-REAR

7. 8Y-0246 LINES GP-R

LINES GP-CYLINDER

8. 8Y-0261 LINES GP-A
9. 8Y-0257 LINES GP-A
0. INFORMATION

TRACK-TYPE TRACTOR D4C TRACK-TYPE TRACTOR 1RJ
D4C AND D4C LGP TRACTORS / POWER SHIFT / 1RJ00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1767 D4C 1RJ (1988)

HYDRAULIC SYSTEM

CYLINDER GP

7J-9223 CYLINDER GP-LIFT

9J-8698 CYLINDER GP-ANGLE

9J-8674 CYLINDER GP-TILT

7J-9920 CYLINDER GP-RIPPER

#SEBP17670240

7J-9223: CYLINDER GP-LIFT

CYLINDER GP-LIFT

7J9223 CYLINDER GP-LIFT-(CHG 1-9)-2 REQUIRED
88.9MM (3.50IN) BORE X 351.7MM (13.85IN) STROKE
BULLDOZER S/N 2YH1-UP, 4GH1-UP
PART OF 6Y2824 & 6Y2825 BULLDOZER ARS
AN ATTACHMENT

c523314 SEBP1767

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-9222 R	[1]	CYLINDER AS
2.	8F-9836	[1]	LUG
3.	8J-4504	[1]	BEARING
4.	9T-7346	[1]	HEAD
5.	8C-9122 J	[1]	SEAL AS
6.	7J-9887	[1]	CROWN
7.	8C-9131 J	[1]	SEAL-LIP TYPE
8.	7J-9227 R	[1]	ROD AS-PISTON
9.	8J-4504	[1]	BEARING
10.	7J-5639	[1]	BOLT-SELF LOCKING
	8J-7415	[1]	WASHER-HARD
11.	5J-8150 J	[1]	SEAL-U-CUP
12.	4J-9224 J	[1]	RING-BACK-UP
13.	2H-3931 J	[1]	SEAL-O-RING
14.	7J-9886	[1]	PISTON
15.	4T-8054 J	[1]	SEAL AS
16.	7J-9885 J	[1]	RING-WEAR
17.	4T-6780	[1]	RING-WEAR

			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	7X-2752 C	[1]	KIT-HYD CYLINDER SEAL
			(INCL PARTS MARKED J)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#SEBP17670241

9J-8698: CYLINDER GP-ANGLE

CYLINDER GP-ANGLE

9J8698 CYLINDER GP-ANGLING-(CHG 1-4)-2 REQUIRED
88.9MM (3.50IN) BORE X 351.7MM (13.85IN) STROKE
BULLDOZER S/N 2YH1-UP, 4GH1-UP
PART OF 6Y2824 & 6Y2825 BULLDOZER ARS
AN ATTACHMENT

c523322 SEBP1767

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9J-8760 R	[1]	CYLINDER AS
2.	4D-0298	[1]	BEARING
3.	3Y-2768	[2]	RING
4.	3S-5275	[2]	BLOCK
5.	2D-6642	[2]	BALL
6.	7J-9887	[1]	CROWN
7.	8C-9131 J	[1]	SEAL-LIP TYPE
8.	4T-8052 R	[1]	ROD AS
9.	6V-8105	[1]	BEARING-ALIGNING
10.	9J-9818	[2]	RING
11.	5J-8150 J	[1]	SEAL-U-CUP
12.	2H-3931 J	[1]	SEAL-O-RING
13.	4J-9224 J	[1]	RING-BACK-UP
14.	7J-9886	[1]	PISTON
15.	4T-8054 JC	[1]	SEAL AS
16.	7J-9885 J	[1]	RING-WEAR
17.	7J-5639	[1]	BOLT-SELF LOCKING
	3K-5234	[1]	WASHER-HARD
18.	8C-9122 J	[1]	SEAL AS
19.	9T-7346	[1]	HEAD
20.	4T-6780	[1]	RING-WEAR

			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	7X-2752 C	[1]	KIT-HYD CYLINDER SEAL
			(INCL PARTS MARKED J)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#SEBP17670242

9J-8674: CYLINDER GP-TILT

CYLINDER GP-TILT

9J8674 CYLINDER GP-TILT-(CHG 0-4)
88.9MM (3.50IN) BORE X 152.4MM (6IN) STROKE
BULLDOZER S/N 2YH1-UP, 4GH1-UP
PART OF 6Y2824 & 6Y2825 BULLDOZER ARS
AN ATTACHMENT

c495657 SEBP1767

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-5639	[1]	BOLT-SELF LOCKING
2.	7J-9885	[1]	RING-WEAR
3.	7J-9886	[1]	PISTON
4.	5J-7013	[1]	SEAL AS
5.	9J-9294 R	[1]	CYLINDER AS
6.	3Y-2768	[2]	RING
7.	4D-0298	[1]	BEARING
8.	5B-8855	[1]	PLATE-SCREW
9.	8C-9122	[1]	SEAL AS
10.	5J-8150	[1]	SEAL-U-CUP
11.	8C-9131	[1]	SEAL-LIP TYPE
12.	8J-0090 R	[1]	ROD AS-PISTON
13.	3Y-2768	[2]	RING
14.	4D-0298	[1]	BEARING
15.	7J-9887	[1]	CROWN
16.	9T-7346	[1]	HEAD
17.	4J-9224	[1]	RING-BACK-UP
18.	2H-3931	[1]	SEAL-O-RING
19.	8J-7415	[1]	WASHER-HARD
20.	4T-6780	[1]	RING-WEAR
21.	3B-8486	[1]	FITTING
22.	3B-8489	[1]	FITTING-GREASE
	R		REMFG PART MAY BE AVAILABLE

#SEBP17670243

7J-9920: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

7J9920 CYLINDER GP-RIPPER-(CHG 6,7)
101.6 MM (4 IN) BORE X 203 MM (8 IN) STROKE
TYPE 1-RIPPER S/N 84U1-UP
PART OF 9J9005 RIPPER
AN ATTACHMENT

c403764 SEBP1767

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-5639	[1]	BOLT-SELF LOCKING
	8J-7415	[1]	WASHER-HARD
2.	7J-9765	[1]	CYLINDER AS
3.	2K-0227	[1]	BEARING-SLEEVE
4.	7J-6469	[1]	PISTON
5.	6J-6917 J	[1]	SEAL-RING
6.	5J-8200 J	[1]	SEAL-U-CUP
7.	1K-6981 J	[1]	SEAL-LIP TYPE
8.	7J-9917	[1]	ROD AS
9.	2K-0227	[1]	BEARING-SLEEVE
10.	6J-2797 J	[1]	RING-WEAR
11.	7J-6462	[1]	HEAD
12.	7J-6461	[1]	CROWN
13.	2K-6830 J	[1]	RING-BACK-UP
14.	1H-8128 J	[1]	SEAL-O-RING
15.	5J-5402	[1]	SEAL AS
	5J-5400 J	[1]	SEAL

			THE FOLLOWING REPAIR
			KIT IS AVAILABLE:
	8T-1370 C	[1]	KIT-SEAL
			(INCL PARTS MARKED J)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP17670244

7J-9920: CYLINDER GP-RIPPER

CYLINDER GP-RIPPER

7J9920 CYLINDER GP-RIPPER-(CHG 8)
101.6 MM (4 IN) BORE X 203 MM (8 IN) STROKE
TYPE 2-RIPPER S/N 84U1-UP
PART OF 9J9005 RIPPER
AN ATTACHMENT

c614890 SEBP1767

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-5639	[1]	BOLT-LOCKING (1-14X2.5IN)
	8J-7415	[1]	WASHER-HARD
2.	7J-9765	[1]	CYLINDER AS
3.	2K-0227	[1]	BEARING-SLEEVE
4.	7J-6469	[1]	PISTON
5.	8C-9124	[1]	SEAL AS (50.8MM ID)
6.	5J-8200	[1]	SEAL-U-CUP
7.	8C-9133	[1]	SEAL
8.	7J-9917	[1]	ROD AS
9.	2K-0227	[1]	BEARING-SLEEVE
10.	6J-2797	[1]	RING-WEAR
11.	9T-9258 C	[1]	HEAD
12.	7J-6461	[1]	CROWN
13.	2K-6830	[1]	RING-BACKUP
14.	1H-8128	[1]	SEAL-O-RING (94.84MM ID)
15.	5J-5402	[1]	SEAL AS
16.	4T-5613 C	[1]	RING-WEAR
17.	8J-0484	[1]	RING-RETAINING
	C		CHANGE FROM PREVIOUS TYPE

#SEBP17670245

8Y-0247: LINES GP-PUMP

LINES GP-PUMP

8Y0247 LINES GP-PUMP
TYPE 1
PART OF 8Y240 & 8Y243 HYDRAULIC ARS
AN ATTACHMENT

c453371 SEBP1767

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-8485	[1]	SEAL-O-RING
2.	030-7935	[1]	CONNECTOR-FLARED
3.	8Y-1518	[1]	TUBE AS
4.	031-4140	[2]	CONNECTOR
5.	9S-8896	[1]	CAP
6.	067-6684	[1]	REDUCER-FLARED
7.	1P-0043	[1]	NUT-FLARED
8.	5P-2242	[1]	TEE-SWIVEL
9.	5G-1004	[1]	HOSE AS
10.	0S-1588	[2]	BOLT
	8M-7145	[2]	WASHER
11.	3D-2824	[1]	SEAL-O-RING
12.	008-8381	[1]	ELBOW
13.	5P-7465	[1]	CLIP (TAB)
	5P-7464	[1]	CLIP (SLOT)
14.	6H-1717	[1]	BOLT
	5P-8245	[1]	WASHER
15.	6S-8050	[3]	CLIP (LARGE)
16.	5G-1750	[1]	PLATE AS
17.	6L-3351	[1]	CLIP-TUBE (SMALL)
	0S-1594	[1]	BOLT
18.	5P-1075	[3]	WASHER-HARD
19.	5G-1003	[1]	TUBE AS
20.	1D-4703	[4]	BOLT
21.	0T-0768	[4]	BOLT
22.	4J-0522	[2]	SEAL
23.	5G-1479	[1]	TUBE AS
24.	0T-0102	[1]	BOLT
25.	5G-1001	[1]	HOSE AS
26.	0L-1351	[1]	BOLT
	1D-4717	[1]	NUT
27.	5G-0446	[1]	TUBE AS
28.	2M-9780	[2]	SEAL-O-RING

#SEBP17670246

8Y-0247: LINES GP-PUMP

LINES GP-PUMP

8Y0247 LINES GP-PUMP
TYPE 2
PART OF 8Y240 & 8Y243 HYDRAULIC ARS
AN ATTACHMENT

c488159 SEBP1767

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-8485	[1]	SEAL-O-RING
2.	4S-6680 C	[1]	CONNECTOR-FLARED
3.	8Y-2414 C	[1]	TUBE AS
4.	030-8196 C	[2]	CONNECTOR
5.	9S-8896	[1]	CAP
6.	3R-9704 C	[1]	ELBOW-SWIVEL
7.	2M-9780	[2]	SEAL-O-RING
8.	7D-0978 C	[1]	TEE
9.	8Y-2413 CI	[1]	HOSE AS
10.	9B-7237 C	[2]	BOLT
	7X-0503 C	[2]	WASHER-HARD
11.	3D-2824	[1]	SEAL-O-RING
12.	030-7950 C	[1]	ELBOW
13.	8S-0023 C	[1]	CLIP (SLOT)
	8S-0024 C	[1]	CLIP (TAB)
14.	5C-6565 C	[1]	BOLT
	8T-4223 C	[1]	WASHER
15.	6S-8050	[3]	CLIP (LARGE)
16.	8Y-2411 C	[1]	PLATE AS
	9F-2978	[2]	NUT-WELD
17.	8C-8582 C	[1]	CLIP (SMALL)
	4L-6454 C	[1]	BOLT
18.	5P-1075	[3]	WASHER-HARD
19.	5G-1003	[1]	TUBE AS
20.	7X-0312 C	[4]	BOLT
21.	8C-6877 C	[4]	BOLT
22.	4J-0522	[2]	SEAL
23.	8Y-2415 C	[1]	TUBE AS
24.	5P-8167 C	[1]	BOLT
25.	5G-1001	[1]	HOSE AS
26.	5S-7379 C	[1]	BOLT
	6V-8801 C	[1]	NUT
27.	5G-0446	[1]	TUBE AS
	C		CHANGE FROM PREVIOUS TYPE
	I		SEE HOSE FABRICATION GUIDE

#SEBP17670247

8Y-0246: LINES GP-REAR ATTACHMENT

LINES GP-REAR ATTACHMENT

8Y0246 LINES GP-REAR ATTACHMENT
S/N 1RJ1-UP
PART OF 8Y0243 HYDRAULIC AR
AN ATTACHMENT

c564823 SEBP1767

8Y0246 LINES GP-REAR ATTACHMENT Parts scheme

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9M-4584	[2]	CONNECTOR-FLARED
	2M-9780	[2]	SEAL-O-RING
2.	8Y-1501	[1]	TUBE AS
3.	8Y-1502	[1]	TUBE AS
4.	5G-2090	[1]	BRACKET AS
	9F-2978	[2]	NUT-WELD
5.	5M-3062	[6]	BOLT
6.	6S-7378	[1]	CLAMP AS
	6S-7374	[1]	CLAMP
	9F-2978	[1]	NUT-WELD
7.	5P-1075	[1]	WASHER-HARD
8.	5G-0933	[2]	TUBE AS
9.	6J-7366	[2]	CAP-FLARED
10.	7F-2060	[2]	LOCKNUT
11.	6S-4340	[1]	PLATE
12.	6V-8801	[3]	NUT

#SEBP17670248

8Y-0261: LINES GP-ANGLE CYLINDER

LINES GP-ANGLE CYLINDER

8Y0261 LINES GP-ANGLE CYLINDER
BULLDOZER S/N 2YH1-UP
PART OF 6Y2824 BULLDOZER AR
AN ATTACHMENT

c555913 SEBP1767

8Y0261 LINES GP-ANGLE CYLINDER Parts scheme

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-1510	[1]	TUBE AS
2.	5G-1056	[1]	TUBE AS
3.	7K-4129	[3]	UNION-FLARED
4.	030-7942	[2]	ELBOW
5.	3J-1907	[5]	SEAL-O-RING
6.	5G-1058	[2]	TUBE AS
7.	1F-7567	[1]	CLIP
8.	8S-8820	[1]	CLIP
9.	8T-9389	[1]	BOLT
	8T-4223	[1]	WASHER-HARD
	5M-1198	[1]	CLIP
10.	5G-2246	[1]	SPACER
11.	2P-7214	[1]	ELBOW
12.	5P-1404	[2]	ADAPTER-O-RING
13.	2R-6806	[2]	CONNECTOR
14.	8Y-1511	[1]	TUBE AS
15.	5G-0682	[2]	HOSE AS
16.	6S-4710	[2]	HOSE AS
17.	005-4362	[4]	ELBOW
18.	3K-0360	[4]	SEAL-O-RING
19.	6S-8021	[2]	GUARD AS
			(EACH INCLUDES)
	3S-3158	[2]	PIPE
20.	7X-0326	[4]	BOLT
21.	7M-2220	[1]	CLIP
22.	6S-8038	[1]	TUBE AS
23.	6S-8040	[2]	HOSE AS
24.	6S-4728	[2]	TUBE AS
25.	8T-9391	[4]	BOLT
26.	6S-4709	[2]	BLOCK AS
27.	5P-1076	[4]	WASHER-HARD
28.	2M-9780	[2]	SEAL-O-RING
29.	030-8194	[2]	CONNECTOR-FLARED

#SEBP17670249

8Y-0257: LINES GP-ANGLE CYLINDER

LINES GP-ANGLE CYLINDER

8Y0257 LINES GP-ANGLE CYLINDER
BULLDOZER S/N 4GH1-UP
PART OF 6Y2825 BULLDOZER AR
AN ATTACHMENT

c555914 SEBP1767

8Y0257 LINES GP-ANGLE CYLINDER Parts scheme

For full view, you need register

Parts for your D4C TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-1510	[1]	TUBE AS
2.	5G-1056	[1]	TUBE AS
3.	7K-4129	[3]	UNION-FLARED
4.	030-7942	[2]	ELBOW
5.	3J-1907	[5]	SEAL-O-RING
6.	5G-1058	[2]	TUBE AS
7.	1F-7567	[1]	CLIP
8.	8S-8820	[1]	CLIP
9.	8T-9389	[1]	BOLT
	8T-4223	[1]	WASHER-HARD
	5M-1198	[1]	CLIP
10.	5G-2246	[1]	SPACER
11.	2P-7214	[1]	ELBOW
12.	5P-1404	[2]	ADAPTER-O-RING
13.	2R-6806	[2]	CONNECTOR
14.	8Y-1511	[1]	TUBE AS
15.	5G-0682 I	[2]	HOSE AS
16.	5G-0683 I	[2]	HOSE AS
17.	005-4362	[4]	ELBOW
18.	3K-0360	[4]	SEAL-O-RING
19.	6S-8021	[2]	GUARD AS
			(EACH INCLUDES)
	3S-3158	[2]	PIPE
20.	7X-0326	[4]	BOLT
21.	7M-2220	[1]	CLIP
22.	6S-8038	[1]	TUBE AS
23.	6S-8040	[2]	HOSE AS
24.	6S-4728	[2]	TUBE AS
25.	8T-9391	[4]	BOLT
26.	6S-4709	[2]	BLOCK AS
27.	5P-1076	[4]	WASHER-HARD
28.	2M-9780	[2]	SEAL-O-RING
29.	030-8194	[2]	CONNECTOR-FLARED
	I		SEE HOSE FABRICATION GUIDE

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Cylinder (3G5767)
D3B & 931B BACKHOE

Stick Cylinder (3G5771)
D3B & 931B BACKHOE

Bucket Cylinder (3G5771)
D3B & 931B BACKHOE

Stabilizer Cylinder (Side Shift) (3G6792)
D3B & 931B BACKHOE

Stabilizer Cylinders (Fixed Pivot) (1U2655 & 1U2656)
D3B & 931B BACKHOE

Blade Lift Cylinder 7J9223
D4B TRACTOR HYDRAULICS

Tilt Cylinder 9J8674
D4B TRACTOR HYDRAULICS

Blade Angle Cylinder 9J8698
D4B TRACTOR HYDRAULICS

Ripper Cylinder 7J9920
D4B TRACTOR HYDRAULICS

Blade Lift Cylinder 7J9223
D3C, D3C (SA), D3C SERIES II, D4C AND D4C SERIES II TRACTOR

Tilt Cylinder 9J8674
D3C, D3C (SA), D3C SERIES II, D4C AND D4C SERIES II TRACTOR

Blade Angle Cylinder 9J8698
D3C, D3C (SA), D3C SERIES II, D4C AND D4C SERIES II TRACTOR

Blade Lift Cylinder 8J6894
D3C, D3C (SA), D3C SERIES II, D4C AND D4C SERIES II TRACTOR

Tilt Cylinder 8J6893
D3C, D3C (SA), D3C SERIES II, D4C AND D4C SERIES II TRACTOR

Ripper Cylinder 7J9920
D3C, D3C (SA), D3C SERIES II, D4C AND D4C SERIES II TRACTOR

Blade Lift Cylinder 9T6652
D3C, D3C (SA), D3C SERIES II, D4C AND D4C SERIES II TRACTOR

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Bench Test Procedures

Disassembly and Assembly

Bucket Cylinder
D3B & 931B BACKHOE

Boom And Boom Cylinder
D3B & 931B BACKHOE

Boom And Boom Cylinder (SS)
D3B & 931B BACKHOE

Stick Cylinder
D3B & 931B BACKHOE

Stabilizer Cylinders
D3B & 931B BACKHOE

Stabilizer Cylinder (Sideshift)
D3B & 931B BACKHOE

Hydraulic Cylinders
D3B & 931B BACKHOE

Support Bracket 935B
D4B TRACTOR & 935B TRACK-TYPE LOADER VEHICLE SYSTEMS

Lift Cylinders (D4B)
D4B TRACTOR & 935B TRACK-TYPE LOADER VEHICLE SYSTEMS

Tilt Cylinder (D4B)
D4B TRACTOR & 935B TRACK-TYPE LOADER VEHICLE SYSTEMS

Blade Angling Cylinders (D4B)
D4B TRACTOR & 935B TRACK-TYPE LOADER VEHICLE SYSTEMS

Lift Cylinders (935B)
D4B TRACTOR & 935B TRACK-TYPE LOADER VEHICLE SYSTEMS

Tilt Cylinders 935B
D4B TRACTOR & 935B TRACK-TYPE LOADER VEHICLE SYSTEMS

Hydraulic Cylinders
D4B TRACTOR & 935B TRACK-TYPE LOADER VEHICLE SYSTEMS

Service Magazine

New Lubrication Fittings On Tilt Cylinders Extend Cylinder Bearing Life{5104,7551,7562}
1990/08/27

New Cylinder Groups Use Piston For Internal Stop {7562,5101,5102,5104}
1997/05/12

Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12

New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D4C :

8Y-0638 CONTROL GP-HYDRAULIC HAND

8Y-0637 CONTROL GP-HYDRAULIC HAND

8Y-0639 CONTROL GP-HYDRAULIC HAND

8Y-0245 CONTROL GP-HYDRAULIC HAND

6S-4767 VALVE GP-BREAKER RELIEF

9G-9288 COVER GP-HYDRAULIC TANK CAP

8Y-0242 CONTROL GP-HYDRAULIC HAND

9J-8698 CYLINDER GP-ANGLE

9J-8674 CYLINDER GP-TILT

7J-9920 CYLINDER GP-RIPPER

8Y-0247 LINES GP-PUMP

8Y-0246 LINES GP-REAR ATTACHMENT

8Y-0261 LINES GP-ANGLE CYLINDER

Truck sale:

Caterpillar D4C
- Crawler dozers
ZIEGLER CAT

20,000

Caterpillar D4C, Construction
- Dozers
RIGGS CAT

29,910

Caterpillar D4CX, Construction
- Dozers
MICHIGAN CAT

12,500

Caterpillar D4C, Construction
- Dozers
MICHIGAN CAT

27,000

Caterpillar D4C, Construction
- Dozers
CLEVELAND BROTHERS EQUIPMENT COMPANY INC