AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-2830 PUMP GP-GOV & FUEL INJ S/N 8TC1413-13822 ELECTRONIC 3406B TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
SHUTOFF GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

TRUCK ENGINE 3406B TRUCK ENGINE 8TC
 3406B Truck (PEEC) Engine 8TC01413-UP SEBP1769 3406B 8TC   (1987)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-ELECTRONIC
4W-2801 GOVERNOR GP-ELECTRONIC
LEVER GP-GOVERNOR CONTROL
4W-9590 LEVER GP-GOVERNOR CONTROL
PUMP GP-GOV & FUEL INJ
4W-2830 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4W-2830 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-5396 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-5396 PUMP GP-GOV & FUEL INJ
 

#SEBP17690520
 

4W-2830: PUMP GP-GOV & FUEL INJ

4W-2830 PUMP GP-GOV & FUEL INJ
S/N 8TC1413-13822
ELECTRONIC
i00378869 SEBP1769
4W2830 PUMP GP-GOV & FUEL INJ Parts scheme 4W2830 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3942 Y [1] PUMP GP-FUEL INJECTION  
2. 4W-2801 Y [1] GOVERNOR GP-ELECTRONIC  
3. 4W-2491 [1] GASKET  
4. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
5. 6T-1789 [1] SOLENOID (FUEL RACK SERVO VALVE)  
6. 2H-3931 [1] SEAL-O-RING  
7. 4W-2482 [2] CLAMP  
8. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
9. 8M-2771 [1] CLIP  
10. 6T-9675 [1] SOLENOID AS (SHUT-OFF)  
11. 6V-1903 [1] SEAL-O-RING  
12. 9W-0493 [1] CONTROL GP (RACK POSITION SENSOR)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8733 [1] PLUG-CONNECTOR (5-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9W-4059 [1] WASHER  
  7F-8607 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17690521
 

4W-2830: PUMP GP-GOV & FUEL INJ

4W-2830 PUMP GP-GOV & FUEL INJ
S/N 8TC13823-14492
ELECTRONIC
i00378873 SEBP1769
4W2830 PUMP GP-GOV & FUEL INJ Parts scheme 4W2830 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1416 CY [1] PUMP GP-FUEL INJECTION  
2. 4W-2801 Y [1] GOVERNOR GP-ELECTRONIC  
3. 4W-2491 [1] GASKET  
4. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
5. 9X-6770 C [1] SOLENOID-ROTARY  
6. 2H-3931 [1] SEAL-O-RING  
7. 4W-2482 [2] CLAMP  
8. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
9. 8M-2771 [1] CLIP  
10. 6T-9675 [1] SOLENOID AS (SHUT-OFF)  
11. 6V-1903 [1] SEAL-O-RING  
12. 9W-0493 [1] CONTROL GP (RACK POSITION SENSOR)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8733 [1] PLUG-CONNECTOR (5-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9W-4059 [1] WASHER  
  7F-8607 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17690522
 

7E-5396: PUMP GP-GOV & FUEL INJ

7E-5396 PUMP GP-GOV & FUEL INJ
S/N 8TC9090-13822
i00406068 SEBP1769
7E5396 PUMP GP-GOV & FUEL INJ Parts scheme 7E5396 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3942 Y [1] PUMP GP-FUEL INJECTION  
2. 7E-5397 Y [1] GOVERNOR GP-ELECTRIC  
3. 4W-2491 [1] GASKET  
4. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
5. 6T-1789 [1] SOLENOID (FUEL RACK SERVO VALVE)  
6. 2H-3931 [1] SEAL-O-RING  
7. 4W-2482 [2] CLAMP  
8. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
9. 8M-2771 [1] CLIP  
10. 6T-9675 [1] SOLENOID AS (SHUT-OFF)  
11. 6V-1903 [1] SEAL-O-RING  
12. 9W-0493 [1] CONTROL GP (RACK POSITION SENSOR)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8733 [1] PLUG-CONNECTOR (5-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9W-4059 [1] WASHER  
  7F-8607 [1] SEAL-O-RING  
13. 3S-2093 [1] STRAP-CABLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17690523
 

7E-5396: PUMP GP-GOV & FUEL INJ

7E-5396 PUMP GP-GOV & FUEL INJ
S/N 8TC13823-13963
i00406080 SEBP1769
7E5396 PUMP GP-GOV & FUEL INJ Parts scheme 7E5396 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1416 CY [1] PUMP GP-FUEL INJECTION  
2. 7E-5397 Y [1] GOVERNOR GP-ELECTRIC  
3. 4W-2491 [1] GASKET  
4. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
5. 9X-6770 C [1] SOLENOID-ROTARY  
6. 2H-3931 [1] SEAL-O-RING  
7. 4W-2482 [2] CLAMP  
8. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
9. 8M-2771 [1] CLIP  
10. 3E-0076 [1] SOLENOID AS (4/28-VOLT)  
11. 6V-1903 [1] SEAL-O-RING  
12. 9W-0493 [1] CONTROL GP (RACK POSITION SENSOR)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8733 [1] PLUG-CONNECTOR (5-PIN)  
  8T-8737 [1] PLUG-SEAL  
  9W-4059 [1] WASHER  
  7F-8607 [1] SEAL-O-RING  
13. 3S-2093 [1] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17690524
 

2W-9161: SHUTOFF GP-MANUAL

2W-9161 SHUTOFF GP-MANUAL
FOR USE WITH PEEC GOVERNOR
AN ATTACHMENT
i00361288 SEBP1769
2W9161 SHUTOFF GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-9954 [1] LEVER  
2. 9F-6580 [1] BOLT (1/4-20X1.125-IN)  
 

#SEBP17690525
 

121-4134: ALTERNATOR GP-CHARGING

121-4134 ALTERNATOR GP-CHARGING
12-VOLT, 115-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-6796@@@@@
i00482792 SEBP1769
1214134 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-3244 [1] LOCKWASHER  
2. 6V-8189 [1] NUT (5/16-18-THD)  
3. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 3E-5451 [1] REGULATOR AS-VOLTAGE (12-VOLT)(ALTERNATOR)  
5. 9L-6770 [1] CAP-DUST  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 7F-7621 [1] WASHER (0.635X1.25X0.09-IN THK)  
8. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
9. 3F-9556 [1] LOCKWASHER  
10. 137-4936 [1] ROTOR AS-ALTERNATOR  
11. 3E-5450 [1] COVER  
12. 4B-2043 [4] NUT (8-32-THD)  
13. 9B-7233 [4] LOCKWASHER  
14. 3E-5448 [1] CONNECTOR  
15. 3E-5446 [1] CONNECTOR  
16. 3E-5457 [1] DIODE AS  
17. 3E-5461 [1] RECTIFIER AS  
18. 7N-9023 [3] SCREW AS (8-32X26.9-MM)  
19. 3E-5460 [1] HOLDER AS-BRUSH  
20. 3E-5459 [2] BRUSH AS-ALTERNATOR  
21. 3N-3718 [2] SCREW AS  
22. 3E-5458 [1] CAPACITOR AS-ALTERNATOR  
23. 4M-5281 [1] BOLT (1/4-20X0.75-IN)  
24. 3E-5454 [1] FAN-ALTERNATOR (11-BLADE)  
25. 3E-5455 [1] HOUSING  
26. 5P-7807 [1] BALL BEARING  
27. 3E-5447 [1] PLATE  
28. 030-9612 [3] SCREW-FORMING (10-24X0.5-IN)  
29. 3E-5452 [1] STATOR AS  
30. 132-1230 [1] KIT-ALTERNATOR TERMINAL (RELAY)  
    (INCLUDES INSULATOR, WASHER, NUT & TERMINAL)
31. 132-1224 [1] FRAME AS-ALTERNATOR  
32. 5P-6920 [1] BEARING-ROLLER  
33. 3E-5462 [1] KIT-ALTERNATOR TERMINAL (BATTERY)  
    (INCLUDES INSULATOR, LOCKWASHER, NUTS & TERMINAL)
 

#SEBP17690526
 

9L-5938: ALTERNATOR GP-CHARGING

9L-5938 ALTERNATOR GP-CHARGING
12 VOLTS, 65 AMPERE
PART OF 9N-0134 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00435255 SEBP1769
9L5938 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6777 [4] BOLT  
2. 9L-6778 [1] FRAME AS-END  
  3H-9675 C [1] PIN-SPRING  
3. 9S-2396 [1] BUSHING-TERMINAL  
4. 5P-6920 C [1] BEARING-ROLLER  
5. 9L-2137 [1] RETAINER AS  
6. 6N-6117 [2] SCREW  
7. 9L-6781 [1] FRAME-DRIVE END  
8. 9L-6766 [1] CONNECTOR  
9. 9L-6767 [1] DIODE AS  
10. 9L-6768 [1] CONNECTOR  
11. 9L-6770 [1] CAP-DUST  
12. 9L-6769 [1] LEAD AS  
13. 9L-6785 [2] SCREW  
  9S-2247 [2] WASHER-SPRING  
14. C [4] NUT  
15. 9L-6776 [1] RECTIFIER AS  
16. 9L-6780 [1] COLLAR  
17. 9N-1206 C [1] SCREW  
18. 9L-6774 [1] REGULATOR AS  
19. 3N-3718 [2] SCREW AS  
20. 9N-1204 C [1] HOLDER AS-BRUSH (ALTERNATOR)  
21. 9L-6775 [1] STATOR AS  
22. 3N-3745 [1] CAPACITOR AS  
23. 9L-2140 [1] PLATE  
24. 9L-6782 [1] SHIELD-DUST  
25. 9L-6783 C [1] COLLAR  
26. 7F-7621 [1] WASHER (0.635X1.25X0.09-IN THK)  
27. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
28. 9L-6784 [1] ROTOR AS  
29. 9L-2139 [1] WASHER-FELT (1.31X1.68X0.125-IN THK)  
30. 5M-3113 [1] BALL BEARING  
31. 9L-2138 [1] GASKET  
32. 9S-2258 [1] FAN & BAFFLE AS  
33. 9B-1722 [3] SCREW (10-24X0.5-IN)  
  3B-4502 [3] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  9L-6786 [1] KIT-RELAY TERMINAL (ALTERNATOR)  
    (BUSHING, NUT, WASHER)
  9L-6787 [1] KIT-BATTERY TERMINAL (ALTERNATOR)  
    (STUD,INSULATOR,NUT,LOCKWASHER)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17690527
 

9N-0134: ALTERNATOR GP-CHARGING

9N-0134 ALTERNATOR GP-CHARGING
12 VOLT, 115 AMPERE
Type 1
AN ATTACHMENT
i00435633 SEBP1769
9N0134 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 009-8708 [1] BOOT-TERMINAL  
2. 9L-5938 CY [1] ALTERNATOR GP-CHARGING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17690528
 

9N-0134: ALTERNATOR GP-CHARGING

9N-0134 ALTERNATOR GP-CHARGING
12 VOLT, 115 AMPERE
Type 2
AN ATTACHMENT
i00435637 SEBP1769
9N0134 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 009-8708 [1] BOOT-TERMINAL  
2. 9X-6796 CY [1] ALTERNATOR GP-CHARGING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17690529
 

9X-6796: ALTERNATOR GP-CHARGING

9X-6796 ALTERNATOR GP-CHARGING
12 VOLT, 115 AMPERE
PART OF 9N-0134 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@121-4134@@@@@
AN ATTACHMENT
i00435667 SEBP1769
9X6796 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-3718 [2] SCREW AS  
2. 6V-8189 [1] NUT (5/16-18-THD)  
  3F-9556 [1] LOCKWASHER  
3. 3E-5456 [1] ROTOR AS  
4. 8T-9364 [1] BOLT (1/4-20X0.625-IN)  
  1H-3244 [1] LOCKWASHER  
5. 9L-6770 [1] CAP-DUST  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
  7F-7621 [1] WASHER (0.635X1.25X0.09-IN THK)  
7. 3E-5447 [1] PLATE  
  9X-2498 [3] SCREW-HEX FLANGE (10-24X0.5-IN)  
8. 3E-5453 [1] HOUSING AS  
9. 8E-8622 [1] BEARING-ROLLER  
10. 3E-5455 [1] HOUSING  
11. 6V-2202 [1] BALL BEARING  
12. 3E-5452 [1] STATOR AS  
13. 9S-2396 [1] BUSHING-TERMINAL  
14. 3E-5454 [1] FAN-ALTERNATOR (11-BLADE)  
15. 3E-5457 [1] DIODE AS  
16. 3E-5448 [1] CONNECTOR  
17. 3E-5446 [1] CONNECTOR  
18. 3E-5458 [1] CAPACITOR AS-ALTERNATOR  
19. 3E-5459 [2] BRUSH AS-ALTERNATOR  
20. 3E-5460 [1] HOLDER AS-BRUSH (ALTERNATOR)  
21. 3E-5451 [1] REGULATOR AS-VOLTAGE (12-VOLT)(ALTERNATOR)  
22. 3E-5461 [1] RECTIFIER AS  
23. 3E-5450 [1] COVER  
24. 6V-8377 [4] NUT (8-32-THD)  
25. 8C-9660 [1] WASHER (4.6X7.9X0.8-MM THK)  
26. 7N-9023 [3] SCREW AS (8-32X26.9-MM)  
   
    AVAILABLE REPAIR KIT(S):
  9L-6786 [1] KIT-RELAY TERMINAL (ALTERNATOR REPAIR)  
    (INCLUDES TERMINAL, BUSHING, WASHERS & NUTS)
  3E-5462 [1] KIT-ALTERNATOR TERMINAL (BATTERY)  
    (INCLUDES TERMINALS, NUTS, LOCKWASHERS & INSULATORS)
 

Information:

Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Fuel Transfer Pump Improved
1985/10/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
Improved Magnet Used In Rack Assembly
1989/03/01
New Valve Assembly And Washer Used In Fuel Transfer Pump Group
1990/01/01
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group
1990/05/01
New Engine Magnetic Speed Sensor
1990/12/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
Full Load Setting (FLS) And Full Torque Setting (FTS) Should Be Correctly Programmed
1991/07/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Electronic Timing Advance Improvements{1272,1253,1264}
1995/01/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/01
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor And Fuel Pump Drive Group (Timing Advance Unit)
3406B (PEEC) DIESEL TRUCK ENGINE
Service Letter-China
Remove All 4P3384 Spools From Parts Stock
Remove All 4P3384 Spools From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Timing Advance Unit
3406B (PEEC) DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE
Rack Actuator Package
3406B (PEEC) DIESEL TRUCK ENGINE
Fuel Shut-Off Solenoid
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improved Magnet Used In Rack Assembly{1705,1286}
1989/03/20
Separate Grounding Of Throttle Limit Switch And Shutoff Solenoid Improves Component Reliability; New Throttle Limit Switch Used{1269,1155,1400}
1989/07/24
Pedal-Mounted Throttle Sensor Requires New Personality Module {1265,1705,1707}
1989/08/07
New Valve Assembly And Washer Used In Fuel Transfer Pump Group{1256}
1989/12/25
Correct Throttle Linkage Adjustment{1265}
1990/01/29
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group {1256}
1990/05/21
New Engine Magnetic Speed Sensor Used{1907}
1990/12/10
Full Load Setting (FLS) And Full Torque Setting (FTS) Should Be Correctly Programmed{1901,0782,1257,1908,7557}
1991/07/08
Fuel System Parts Information{1251,1264,1250}
1991/09/02
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Summary Of Changes To Timing Advance Drive Groups{1272}
1993/05/24
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
9N-3937 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION
7E-6006 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-3942 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-3942 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1416 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
4W-2830 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-5396 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-5396 PUMP GP-GOV & FUEL INJ
SHUTOFF GP-MANUAL
2W-9161 SHUTOFF GP-MANUAL
ALTERNATOR GP-CHARGING
121-4134 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
9L-5938 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
9N-0134 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
9N-0134 ALTERNATOR GP-CHARGING

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.