AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-2274 CONTROL GP-ENGINE ELECTRONIC S/N 8TC9090-10819 3406B TRUCK ENGINE


ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE

TRUCK ENGINE 3406B TRUCK ENGINE 8TC
 3406B Truck (PEEC) Engine 8TC01413-UP SEBP1769 3406B 8TC   (1987)

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-ENGINE
CONTROL GP-ENGINE ELECTRONIC
9Y-2274 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2274 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2274 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
 

#SEBP17690620
 

9Y-2274: CONTROL GP-ENGINE ELECTRONIC

9Y-2274 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC9090-10819
i00439197 SEBP1769
9Y2274 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-6864 C [1] CONTROL GP-ELECTRONIC  
    (PERSONALITY MODULE)
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690621
 

9Y-2275: CONTROL GP-ENGINE ELECTRONIC

9Y-2275 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC1413-7380
i00439199 SEBP1769
9Y2275 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 7X-1209 [1] CONTROL GP (PERSONALITY MODULE)  
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690622
 

9Y-2275: CONTROL GP-ENGINE ELECTRONIC

9Y-2275 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC6561-8564
i00439203 SEBP1769
9Y2275 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-3117 C [1] CONTROL GP-ELECTRONIC (PERSONALITY MODULE)  
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690623
 

9Y-2275: CONTROL GP-ENGINE ELECTRONIC

9Y-2275 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC8565-9089
i00439208 SEBP1769
9Y2275 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-3319 C [1] CONTROL GP-ELECTRONIC (PERSONALITY MODULE)  
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690624
 

9Y-2275: CONTROL GP-ENGINE ELECTRONIC

9Y-2275 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC9090-13189
i00439222 SEBP1769
9Y2275 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-6865 C [1] CONTROL GP-ELECTRONIC (PERSONALITY MODULE)  
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690625
 

9Y-2275: CONTROL GP-ENGINE ELECTRONIC

9Y-2275 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC13190-13243
i00439216 SEBP1769
9Y2275 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-6865 [1] CONTROL GP-ELECTRONIC (PERSONALITY MODULE)  
5. 8C-9988 C [1] CONTROL GP-ELECTRONIC  
6. 6V-8189 C [3] NUT (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690626
 

9Y-2275: CONTROL GP-ENGINE ELECTRONIC

9Y-2275 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC13244-14485
i00439226 SEBP1769
9Y2275 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-9768 C [1] CONTROL GP-ELECTRONIC (PERSONALITY MODULE)  
5. 8C-9988 [1] CONTROL GP-ELECTRONIC  
6. 6V-8189 [3] NUT (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690627
 

9Y-2276: CONTROL GP-ENGINE ELECTRONIC

9Y-2276 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC1413-5182
i00439229 SEBP1769
9Y2276 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 7X-1203 [1] CONTROL GP (PERSONALITY MODULE)  
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690628
 

9Y-2276: CONTROL GP-ENGINE ELECTRONIC

9Y-2276 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC3331-6560
i00439232 SEBP1769
9Y2276 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-0385 [1] CONTROL GP-ELECTRONIC (PERSONALITY MODULE)  
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17690629
 

9Y-2276: CONTROL GP-ENGINE ELECTRONIC

9Y-2276 CONTROL GP-ENGINE ELECTRONIC
S/N 8TC6561-8564
i00439234 SEBP1769
9Y2276 CONTROL GP-ENGINE ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 9F-7022 [2] BOLT (1/4-20X1.5-IN)  
4. 9X-3103 C [1] CONTROL GP-ELECTRONIC (PERSONALITY MODULE)  
5. 8T-8770 [1] CONTROL GP-ELECTRONIC  
6. 1D-4716 [3] NUT-FULL (5/16-18-THD)  
7. 8C-9987 [3] WASHER (8.3X28X2.5-MM THK)  
8. 8C-9892 [3] STUD-MOUNTING  
9. 7X-1387 [3] WASHER (10.26X22.22X1.9-MM THK)  
10. 9W-0115 [6] MOUNT  
11. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Truck Engine News
Remanufactured Programmable Electronic Engine Controls (PEEC)
1987/06/01
New 8T5282 Programmable Electronic Engine Control Digital Diagnostic Tool Group (PEEC DDT) Available
1987/09/01
New 8T8697 Electronic Control Analyzer Programmer (ECAP), 8C5919 Electronic (ECAP PEEC) Conversion Group and 8T5275 Adapter Cable Assembly (T-Harness Cable) Available
1987/09/01
Improved Mounting Hardware For Electronic Control Group
1987/11/01
Updated 8C5919 3406B PEEC Service Program Module Available
1988/03/01
Vehicle Speed Calibration Can Be Corrected Without Knowing Number Of Transmission Chopper Teeth
1988/07/01
Correct Timing Specification
1989/01/01
Remove Fuel From Electronic Control Module (ECM) Before Shipping
1989/01/01
New Features And Enhanced Fault Codes Available In New PEEC Personality Modules
1989/03/01
Updated 7X1830 SPM For 8T5282 3406B PEEC DDT Available
1989/03/01
Recommended Wiring For Vehicle Speed Circuit
1989/04/01
Owners Of Digital Diagnostic Tools (DDT) And Electronic Control Analyzer Programmers (ECAP) Must Register Their Service Tools To Automatically Receive The Mailing Of The May 1989 Service Program Module (SPM) Update
1989/04/01
Low Gear Limits May Be Ignored On 3406B (PEEC) Truck Engines
1989/04/01
Subscription Service Available For ECAP And DDT Service Program Modules
1989/07/01
Pedal-Mounted Throttle Sensor Requires New Personality Module
1989/08/01
Service Program Modules Must Be Ordered By Literature Form Numbers
1989/10/01
Effective Dates, Serial Numbers And Features Of PEEC Personality Modules
1989/11/01
Electrostatic Painting And/Or Incorrect Welding Can Cause Permanent Damage To Electronic Control Module (ECM)
1989/11/01
Correct Throttle Linkage Adjustment
1990/01/01
Idle Shutdown Timer Used In Auxiliary Power Applications
1990/03/01
Data Link Adapter For 3176 And 3406B PEEC (Programmable Electronic Engine Controls) Used In Navistar Trucks
1990/05/01
Effective Dates, Serial Numbers And Features Of PEEC Personality Modules
1990/08/01
New Rotary Solenoid (Brushless Torque Motor) Used In PEEC Engines
1990/08/01
Incorrect Throttle Adjustment Can Cause Engine Surge
1990/09/01
New Remanufactured 0R6183 Control Group (Personality Module) Available
1990/09/01
Price Adjustments On Service Program Modules
1990/10/01
Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01
1990/11/01
Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults)
1990/12/01
New 3E0020 Vehicle Speed Buffer Used
1991/01/01
New Dual Service Program Module (SPM) Available
1991/07/01
Troubleshooting Electrical Noise Problems
1992/03/01
New Electronic Control Groups (Rack Position Sensor And Timing Position Sensor) Provide Increased Reliability
1992/03/01
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems
1992/04/01
New Personality Modules Provide Improved Cruise Control
1993/03/01
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) And Electronic Systems
1993/04/01
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved
1993/11/01
New Pedal Mounted Throttle Position Sensor Available{1913}
1994/01/01
Service Tools For Electronic Controls{0781,0782}
1994/04/22
"T" Adapter Cable Assembly Available{1901}
1997/07/01
Proper Welding Procedure On Truck Engines With Electronic Controls{1400}
1998/05/01
Flash File Bulletin Board System To Be Discontinued {1920}
1998/09/01
Electronic Controller Analyzer Programmer (ECAP) Truck SPM Version 2.3 Update{1920}
1999/01/01
Electronic Technician (ET) Version 2.3 Update{1920}
1999/01/01
Engine Control Module (ECM) Hotline Is Now Available {1901}
2015/07/24
Look up FLS and FTS Values for Rerates. {7620}
2001/08/01
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2005/08/01
Responsibilities for Emission Certified Engines {1000, 1900}
2005/09/01
Update on the Factory Password System {1901, 7620}
2008/02/01
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 1900, 7610}
2008/05/01
Setting Modifications for the Messenger Display that Is Used With On-Highway Truck Engines in South America and Venezuela {1901, 1920, 7490}
2008/12/01
Engine News
Engine Harness Assembly (Bypass) Flashes Messenger When Communication Through the Service Connector is Not Possible {0779, 0781}
2004/04/01
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Cold Weather Recommendation Charts
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
Using the 8T8697 Electronic Control Analyzer Programmer (ECAP){0781, 0782}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
New Electronic Transducer Module Installation Instructions For 3406B And 3406C Truck Engines{1900, 1904, 1917, 1924}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
ECM Communication and Flashing Issues{0709, 1901, 7620}
ECM Communication and Flashing Issues{0709, 1901, 7620}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Technical Information Bulletin
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Electronic Control Analyzer Programmer (ECAP) Timing Calibration Problem
Incorrect Programming of the &quot;Pulses Per Mile&quot; Parameter in CAT ET Configuration Screen{0785, 1901}
Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901}
Specifications
Timing Position Sensor And Timing Solenoid (BTM)
3406B (PEEC) DIESEL TRUCK ENGINE
Ether Starting Aid
3406B (PEEC) DIESEL TRUCK ENGINE
Tool Operating Manual
Using the NEXG4506 3406B PEEC Truck Functions ECAP Service Program Module{0781, 0782}
Using the NEXG4506 3406B PEEC Truck Functions ECAP Service Program Module{0781, 0782}
Using the NEXG4508 3406 Truck Functions Service Program Module{0781, 0782}
Using the NEXG4508 3406 Truck Functions Service Program Module{0781, 0782}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4512 Customer Parameter Configuration Aid Service Program Module{0781, 0785}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Using the ECAP NEXG4521 Machine Functions Service Program Module{0781}
Disassembly and Assembly
Control Module (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE
Personality Module (PEEC)
3406B (PEEC) DIESEL TRUCK ENGINE
Service Magazine
Remanufactured Programmable Electronic Engine Controls (PEEC) {1250}
1987/06/01
New 8T8697 Electronic Control Analyzer Programmer (ECAP), 8C5919 Electronic (ECAP PEEC) Conversion Group and 8T5275 Adapter Cable Assembly (T-Harness Cable) Available{0600}
1987/08/24
New 8T5282 Programmable Electronic Engine Control Digital Diagnostic Tool Group (PEEC DDT) Available{0600}
1987/08/24
Improved Mounting Hardware For Electronic Control Group{1250,1259}
1987/11/23
Updated 8C5919 3406B PEEC Service Program Module Available{0781,0782}
1988/03/07
Remove Fuel From Electronic Control Module (ECM) Before Shipping {1705}
1988/12/26
Cold Start Procedures For 3406 (PEEC) Truck Engines{1705}
1989/02/13
New Features And Enhanced Fault Codes Available In New PEEC Personality Modules{1707,1705}
1989/02/27
Updated 7X1830 SPM For 8T5282 3406B PEEC DDT Available{1707,1705}
1989/02/27
Owners Of Digital Diagnostic Tools (DDT) And Electronic Control Analyzer Programmers (ECAP) Must Register Their Service Tools To Automatically Receive The Mailing Of The May 1989 Service Program Module (SPM) Update {1705}
1989/05/01
Subscription Service Available For ECAP And DDT Service Program Modules{0782,1705}
1989/07/24
Pedal-Mounted Throttle Sensor Requires New Personality Module {1265,1705,1707}
1989/08/07
Service Program Modules Must Be Ordered By Literature Form Numbers{1705,7494}
1989/10/30
Effective Dates, Serial Numbers and Features Of PEEC Personality Modules{1705,1707}
1989/11/20
Electrostatic Painting And/Or Incorrect Welding Can Cause Permanent Damage To Electronic Control Module (ECM){1706}
1989/11/27
Idle Shutdown Timer Used In Auxiliary Power Applications{1705,1706,4267}
1990/03/12
New Personality Modules Require New Service Program Modules {1902}
1990/03/26
Data Link Adapter For 3176 And 3406B PEEC (Programmable Electronic Engine Controls) Used In Navistar Trucks{1900}
1990/04/30
New Rotary Solenoid (Brushless Torque Motor) Used In PEEC Engines{1909}
1990/08/06
Effective Dates, Serial Numbers And Features OF PEEC Personality Modules{1900,1902}
1990/08/13
New Remanufactured 0R6183 Control Group (Personality Module) Available{1902}
1990/09/10
Price Adjustments On Service Program Modules{1902,0782}
1990/10/08
Service Manual SENR3479-04 Available For Troubleshooting Engine Test Procedures{1901,1900}
1990/11/05
Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing &amp; Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01{1905,1911}
1990/11/26
Tools Available For Out-Of-Chassis Dynamometer Testing Of Electronic Engines{0781,1901,1913}
1990/12/10
Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults){1901,1902}
1990/12/17
New 3E0020 Vehicle Speed Buffer Used{1914,1900}
1990/12/24
New Dual Service Program Module (SPM) Available{1901}
1991/07/08
New Electronic Control Groups (Rack Position Sensor And Timing Position Sensor) Provide Increased Reliability {1905,1911}
1992/03/23
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems{1900}
1992/04/20
Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) And Electronic Systems{1900}
1993/04/12
New Personality Modules Provide Improved Cruise Control{1902}
1993/04/12
8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/22
Service Tools For Electronic Controls {0781,0782}
1994/04/25
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}

Caterpillar Parts SIS Catalog 3406B :

CONTROL GP-ENGINE ELECTRONIC
9Y-2274 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2274 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2274 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2273 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2273 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2273 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2273 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2272 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2275 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2276 CONTROL GP-ENGINE ELECTRONIC
CONTROL GP-ENGINE ELECTRONIC
9Y-2276 CONTROL GP-ENGINE ELECTRONIC

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.