AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3508 GENERATOR SET ENGINE 1ZF00001-UP FUEL SYSTEM Caterpillar SIS



GEN SET ENGINE 3508 GEN SET ENGINE 1ZF
 3508 GENERATOR SET ENGINE 1ZF00001-UP SEBP1771 3508 1ZF   (1988)

Parts group 3508:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
4W-2965 CONTROL GP-FUEL INJECTION
4W2965 CONTROL GP-FUEL INJECTION-PART 1 OF 2
CONTROL GP-FUEL INJECTION
4W-2965 CONTROL GP-FUEL INJECTION
4W2965 CONTROL GP-FUEL INJECTION-PART 2 OF 2
CONTROL GP-GOVERNOR
CONTROL AS-GOVERNOR
101-8923 CONTROL AS-GOVERNOR
1018923 CONTROL AS-GOVERNOR
AN ATTACHMENT
CONTROL AS-GOVERNOR
7C-0246 CONTROL AS-GOVERNOR
7C0246 CONTROL AS-GOVERNOR
WOODWARD 2301A
AN ATTACHMENT
CONTROL GP-GOVERNOR
2W-2643 CONTROL GP-GOVERNOR
2W2643 CONTROL GP-GOVERNOR
PART OF 7C0098 GOVERNOR
AN ATTACHMENT
BOX AS-GOVERNOR PREREGULATOR
4W-5391 BOX AS-GOVERNOR PREREGULATOR
4W5391 BOX AS-PREREGULATOR
S/N 1ZF1-544
PART OF 8N0237 GOVERNOR
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
4W-5267 DRIVE GP-TACHOMETER
4W5267 DRIVE GP-TACHOMETER & SERVICE METER
AN ATTACHMENT
FILTER GP-FUEL
FILTER GP-FUEL
7C-1308 FILTER GP-FUEL
7C1308 FILTER GP-FUEL
FILTER GP-PRIMARY FUEL
8N-6435 FILTER GP-PRIMARY FUEL
8N6435 FILTER GP-PRIMARY FUEL
AN ATTACHMENT
GOVERNOR GP
COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR
2W0782 COVER GP
PART OF 7C0098, 1243172 GOVERNORS
AN ATTACHMENT
8N-0237 GOVERNOR GP-ELECTRIC
8N0237 GOVERNOR GP-ELECTRIC
S/N 1ZF545-UP
WOODWARD-2301
8N-0237 GOVERNOR GP-ELECTRIC
8N0237 GOVERNOR GP-ELECTRIC
S/N 1ZF1-544
WOODWARD-2301
GOVERNOR GP
8N-0207 GOVERNOR GP
8N0207 GOVERNOR GP
S/N 1ZF1-544
PART OF 8N0237 GOVERNOR
GOVERNOR GP
7E-8799 GOVERNOR GP
7E8799 GOVERNOR GP
S/N 1ZF545-UP
PART OF 8N0237 GOVERNOR
GOVERNOR GP-ELECTRONIC
138-1973 GOVERNOR GP-ELECTRONIC
1381973 GOVERNOR GP-ELECTRONIC
AN ATTACHMENT
1W-5024 GOVERNOR GP
1W5024 GOVERNOR GP-RH
WOODWARD-RH-TYPE 2
1N2900 MOTOR CONTROL ASSEMBLY IS AVAILABLE
AN ATTACHMENT
1W-5024 GOVERNOR GP
1W5024 GOVERNOR GP-WOODWARD-RH
WOODWARD-RH-TYPE 1
1N2900 MOTOR CONTROL ASSEMBLY IS AVAILABLE
AN ATTACHMEN
DRIVE GP-GOVERNOR
8N-0117 DRIVE GP-GOVERNOR
8N0117 DRIVE GP-GOVERNOR
PART OF 8N0237 GOVERNOR
DRIVE GP-GOVERNOR
1W-2135 DRIVE GP-GOVERNOR
1W2135 DRIVE GP-GOVERNOR
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
FASTENER GP-GOVERNOR
7N-4867 FASTENER GP-GOVERNOR
7N4867 FASTENER GP-GOVERNOR
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
FASTENER GP-GOVERNOR
4W-5030 FASTENER GP-GOVERNOR
4W5030 FASTENER GP-GOVERNOR*R
TYPE 1. S/N 1ZF1-UP
PART OF 8N0237 GOVERNOR-ELECTRIC
FASTENER GP-GOVERNOR
4W-5030 FASTENER GP-GOVERNOR
4W5030 FASTENER GP-GOVERNOR*R
TYPE 2. S/N 1ZF1-UP
PART OF 8N0237 GOVERNOR-ELECTRIC
7W3355-PAGE 113
FASTENER GP-GOVERNOR
4W-5030 FASTENER GP-GOVERNOR
4W5030 FASTENER GP-GOVERNOR*R
TYPE 3. S/N 1ZF1-UP
PART OF 8N0237 GOVERNOR-ELECTRIC
4P7610-PAGE 85.00.03
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 1 OF 5*R
TYPE 1
2W2643-PAGE 92.02 & 2W1458-PAGE 91
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 2 OF 5*R
TYPE 1
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 3 OF 5*R
TYPE 1
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 4 OF 5*R
TYPE 1
2W0233-PAGE 92.02 & 7C3982-PAGE 92.01
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 5 OF 5*R
TYPE 1
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 1 OF 5*R
TYPE 2
2W2643-PAGE 92.02, 2W1458-PAGE 91, 2W0782-PAGE 36.01
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 2 OF 5*R
TYPE 2
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 3 OF 5*R
TYPE 2
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 4 OF 5*R
TYPE 2
9Y1588-PAGE 92.00.01, 2W0233-PAGE 92.02
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 5 OF 5*R
TYPE 2
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 1 OF 5*R
TYPE 3
2W2643-PAGE 92.02, 2W0782-PAGE 36.01
PART OF 1W4024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 2 OF 5*R
TYPE 3
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 3 OF 5*R
TYPE 3
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 4 OF 5*R
TYPE 3
9Y1588-PAGE 92.00.01, 2W0233-PAGE 92.02
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
7C-0098 GOVERNOR GP
7C0098 GOVERNOR GP-PART 5 OF 5*R
TYPE 3
PART OF 1W5024 GOVERNOR
AN ATTACHMENT
GOVERNOR GP
124-3172 GOVERNOR GP
1243172 GOVERNOR GP
6I3842-PAGE 85.16. 2W0782-PAGE 36.01
PART OF 1W5024 GOVERNOR-RH
AN ATTACHMENT
HOUSING GP-GOVERNOR
2W-1458 HOUSING GP-GOVERNOR
2W1458 HOUSING GP-GOVERNOR
PART OF 7C0098 GOVERNOR
AN ATTACHMENT
PUMP GP-GEROTOR
9Y-1588 PUMP GP-GEROTOR
9Y1588 PUMP GP-GEROTOR
PART OF 7C0098 GOVERNOR
AN ATTACHMENT
PUMP GP-GEROTOR
6I-3842 PUMP GP-GEROTOR
6I3842 PUMP GP-GEROTOR
PART OF 1243172 GOVERNOR
AN ATTACHMENT
PUMP GP-GEROTOR
7C-3982 PUMP GP-GEROTOR
7C3982 PUMP GP-GEROTOR
PART OF 7C0098 GOVERNOR
AN ATTACHMENT
FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
2W0233 FLYWEIGHT GP
TYPE 1
PART OF 7C0098 GOVERNOR
AN ATTACHMENT
BOX AS-GOVERNOR PREREGULATOR
4W-5391 BOX AS-GOVERNOR PREREGULATOR
4W5391 BOX AS-PREREGULATOR
S/N 1ZF1-544
PART OF 8N0237 GOVERNOR
FLYWEIGHT GP
2W-0233 FLYWEIGHT GP
2W0233 FLYWEIGHT GP
TYPE 2
PART OF 7C0098 GOVERNOR
AN ATTACHMENT
LINES GP-FUEL
COOLER GP-FUEL
7E-6681 COOLER GP-FUEL
7E6681 COOLER GP-FUEL
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E6682 COOLER GP-FUEL
TYPE 1
AN ATTACHMENT
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
7E6634 COOLER GP-FUEL
TYPE 1
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E6682 COOLER GP-FUEL
TYPE 2
AN ATTACHMENT
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
7E6634 COOLER GP-FUEL
TYPE 2
ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E6682 COOLER GP-FUEL
TYPE 3
AN ATTACHMENT
LINES GP-FUEL INJECTION
7C-8146 LINES GP-FUEL INJECTION
7C8146 LINES GP-FUEL INJECTION-PART 1 OF 2
S/N 1ZF1-432
LINES GP-FUEL INJECTION
7C-8146 LINES GP-FUEL INJECTION
7C8146 LINES GP-FUEL INJECTION-PART 2 OF 2
S/N 1ZF1-432
LINES GP-FUEL INJECTION
7C-8146 LINES GP-FUEL INJECTION
7C8146 LINES GP-FUEL INJECTION-PART 1 OF 2
S/N 1ZF433-597
LINES GP-FUEL INJECTION
7C-8146 LINES GP-FUEL INJECTION
7C8146 LINES GP-FUEL INJECTION-PART 2 OF 2
S/N 1ZF433-597
LINES GP-FUEL INJECTION
7C-8146 LINES GP-FUEL INJECTION
7C8146 LINES GP-FUEL INJECTION-PART 1 OF 2
S/N 1ZF598-UP
LINES GP-FUEL INJECTION
7C-8146 LINES GP-FUEL INJECTION
7C8146 LINES GP-FUEL INJECTION-PART 2 OF 2
S/N 1ZF598-UP
LINES GP-FLEXIBLE FUEL
5N-2438 LINES GP-FLEXIBLE FUEL
5N2438 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT
PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
9Y0136 PUMP GP-FUEL INJECTION
TYPE 1
PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
9Y0136 PUMP GP-FUEL INJECTION
TYPE 3
PUMP GP-FUEL INJECTION
9Y-0136 PUMP GP-FUEL INJECTION
9Y0136 PUMP GP-FUEL INJECTION
TYPE 2
7E6408-PAGE 0090.00.02
INJECTOR GP-FUEL
7E-6408 INJECTOR GP-FUEL
7E6408 INJECTOR GP-FUEL*R
PART OF 9Y0136 PUMP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
9Y-6095 PUMP GP-FUEL PRIMING
9Y6095 PUMP GP-FUEL PRIMING
S/N 1ZF433-UP
AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-6151 PUMP GP-FUEL TRANSFER
8N6151 PUMP GP-FUEL TRANSFER
1N4478-PAGE 92
PUMP GP-FUEL TRANSFER
1N-4478 PUMP GP-FUEL TRANSFER
1N4478 PUMP GP-FUEL TRANSFER*R
PART OF 8N6151 PUMP
SHUTOFF GP
SHUTOFF GP-MANUAL
1W-4861 SHUTOFF GP-MANUAL
1W4861 SHUT-OFF GP-MANUAL
AN ATTACHMENT
SHUTOFF GP-MANUAL
7N-4869 SHUTOFF GP-MANUAL
7N4869 SHUT-OFF GP-MANUAL
COOLER GP
COOLER GP-FUEL
7E-6681 COOLER GP-FUEL
7E6681 COOLER GP-FUEL
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E6682 COOLER GP-FUEL
TYPE 1
AN ATTACHMENT
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
7E6634 COOLER GP-FUEL
TYPE 1
AN ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E6682 COOLER GP-FUEL
TYPE 2
AN ATTACHMENT
COOLER GP-FUEL
7E-6634 COOLER GP-FUEL
7E6634 COOLER GP-FUEL
TYPE 2
ATTACHMENT
COOLER GP-FUEL
7E-6682 COOLER GP-FUEL
7E6682 COOLER GP-FUEL
TYPE 3
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Plug Used In Front Housing For Fuel Injection Control Group
1990/03/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Engine News
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Plug Used In Front Housing For Fuel Injection Control Group
1990/03/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
A Stronger Lever Assembly Is Used In The Fuel Injection Control Groups {1298}
2002/06/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7E5253 Governor Control Assembly{1265}
Installation of 7E5253 Governor Control Assembly{1265}
Specifications
Fuel Injection Control Linkage
3500 Generator Set Engines
Systems Operation
Fuel Injection Control Linkage
3500 Generator Set Engines
Testing and Adjusting
Fuel Setting
3500 Generator Set Engines
Disassembly and Assembly
Fuel Injection Control Linkage
3500 GENERATOR SET ENGINES
Service Magazine
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Plug Used In Front Housing For Fuel Injection Control Group
1990/03/01
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Operation and Maintenance Manual
Engine Speed Governing
3500 Industrial and Generator Set Engines
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of 7E5253 Governor Control Assembly{1265}
Installation of 7E5253 Governor Control Assembly{1265}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Shutoff Control Group Identification
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Shutoff Control Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Service Magazine
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Fuel Priming Pump Used
1987/05/01
Fuel Priming Pump Available As An Attachment
1988/12/01
Improvements To Auxiliary Fuel Filter Housing Assembly
1990/06/01
New Oil Filter Shield And Shield Mounting Screws Used In Oil Filter Base Assemblies {1306}
1995/05/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Fuel Filter Differential Pressure - Check
3500 Industrial and Generator Set Engines
Fuel System Secondary Filter - Replace
3500 Industrial and Generator Set Engines
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Specifications
Fuel Filter Base
3500 Generator Set Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base
3500 GENERATOR SET ENGINES
Service Magazine
Fuel Priming Pump Available As An Attachment{1258}
1988/11/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improvements To Auxiliary Fuel Filter Housing Assembly {1262}
1990/06/11
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/06/01
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Basic Governor Groups (Woodward 3161) Have Self-Contained Oil Supply {1264}
1997/12/16
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
3500 Industrial and Generator Set Engines
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of 7E5253 Governor Control Assembly{1265}
Installation of 7E5253 Governor Control Assembly{1265}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Governor Linkage
3500 Generator Set Engines
Governor Drive
3500 Generator Set Engines
Service Letter-China
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Systems Operation
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Installation And Operation
2301A SPEED CONTROL
Electronic Governors
3500 Generator Set Engines
Governor - 3161
3500 Generator Set Engines
Service Letter-APD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Testing &amp; Adjusting
CATERPILLAR 3161 GOVERNOR
Installation And Operation
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Governor Actuator
3500 GENERATOR SET ENGINES
Governor Actuator Drive
3500 GENERATOR SET ENGINES
Governor Fastener Group
3500 GENERATOR SET ENGINES
Fuel Injection Control Linkage
3500 GENERATOR SET ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Service Magazine
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Additional Information For Installing Fuel Injectors
1988/06/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Fuel Manifolds Changed To Steel
1989/05/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Clamps With Grommets Used In Fuel Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
Improvements To Auxiliary Fuel Filter Housing Assembly
1990/06/01
New, Longer Bolt Gives Better Retention To Fuel Injection Lines
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines
1991/05/01
New Return Spring Used In Unit Injectors
1991/08/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
A New Fuel Shield is Available {1252}
2005/03/28
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01
Check Valve Added To Fuel Injection Lines {1274}
1989/05/22
New Clamps With Grommets Used In Fuel Lines, Turbocharger Oil Supply Lines, And Turbocharger Water Supply Lines {1274,1307,1380}
1989/05/22
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New, Longer Bolt Gives Better Retention To Fuel Injection Lines {1252}
1990/05/28
Improvements To Auxiliary Fuel Filter Housing Assembly {1262}
1990/06/11
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines{1252,1702}
1991/05/27
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Engine News
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Additional Information For Installing Fuel Injectors
1988/06/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New Return Spring Used In Unit Injectors
1991/08/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Fuel Inlet Screens are Removed from Remanufactured Fuel Injectors {1250, 1252}
2003/06/01
A New Fuel Shield is Available {1252}
2005/03/28
Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22
Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/02/01
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Proper Installation of Braided Steel Hoses{7554}
Proper Installation of Braided Steel Hoses{7554}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Pressure Regulator
3500 Generator Set Engines
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Disassembly and Assembly
Fuel Injectors
3500 GENERATOR SET ENGINES
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fuel Manifolds Changed To Steel {1252,1702}
1989/05/01
Check Valve Added To Fuel Injection Lines {1274}
1989/05/22
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Explanation Of Differences In Timing Advance Information
1981/08/26
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/04/01
Operation and Maintenance Manual
Cold Weather Operation
SR500 Generators
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7E5253 Governor Control Assembly{1265}
Installation of 7E5253 Governor Control Assembly{1265}
Use of 4C8753 Extended Collet{1250}
Use of 4C8753 Extended Collet{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Fuel Priming Pump Available As An Attachment{1258}
1988/11/21
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
New Fuel Injector Assemblies Used{1290}
1989/10/16
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
New Water Regulator Prevents Leakage{1355,1393}
1990/06/25
New Jacket Water Heater Groups Have New Thermostat{1355,1383}
1990/06/25
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
New Fuel Manifolds And Clamps Reduce Vibration Of Fuel Lines{1252,1702}
1991/05/27
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20
Improved Jacket Water Heater Thermostat{1355}
1993/09/20
Use 134-5195 Adapter Cable For T-harness In Electronic Control Systems{1900,0781}
1998/03/09
Special Instruction
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Return Spring Used In Unit Injectors {1290}
1991/07/22
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Engine News
Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15
Explanation Of Differences In Timing Advance Information
1981/08/26
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Lubricate Clamp When Installing Unit Injector Assemblies
1986/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Additional Information For Installing Fuel Injectors
1988/06/01
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors
1988/12/01
Check Valve Added To Fuel Injection Lines
1989/05/01
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation
1989/07/01
Improved Control Rod Assembly Used In Fuel Injection Control Groups
1989/08/01
New Fuel Injectors Available For Parts Service
1989/09/01
New Fuel Injector Assemblies Used
1989/10/01
Fuel Injector Reference For 3500 Family of Engines
1989/10/01
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1)
1990/06/01
Some Fuel Injectors May Be Used In Mixed Sets
1990/06/01
New, Longer Bolt Gives Better Retention To Fuel Injection Lines
1990/06/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
New Return Spring Used In Unit Injectors
1991/08/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control
1991/10/01
New And Remanufactured Fuel Injector Reference
1992/05/01
New And Remanufactured Fuel Injector Reference
1993/01/01
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures
1993/05/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01
Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
New Sequence for Adjusting the Fuel Injectors {1290, 1290}
2006/01/02
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Operation and Maintenance Manual
Fuel Injector - Inspect/Adjust
3500 Industrial and Generator Set Engines
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Nozzle Assembly Replacement for Type 2 Fuel Injectors{1254}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Spring Replacement for Type 2 Fuel Injectors{1250}
Spring Replacement for Type 2 Fuel Injectors{1250}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Installation Of 8N6414 Ether Starting Aid Group{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Performing a Multiple Cylinder Cutout Test {1290}
Performing a Multiple Cylinder Cutout Test {1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injector Mechanism
3500 Generator Set Engines
Service Letter-China
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Service Letter-Asia
Systems Operation
Fuel Injector
3500 Generator Set Engines
Fuel Injection Cycle
3500 Generator Set Engines
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
The Fuel Injector Bore Needs To Be Machined In The Cylinder Heads Of Certain 3508, 3512, And 3516 Engines
Testing and Adjusting
Fuel Injector Testing
3500 Generator Set Engines
Checking Engine Cylinders
3500 Generator Set Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Generator Set Engines
Fuel Injector Timing
3500 Generator Set Engines
Fuel Injector Synchronization
3500 Generator Set Engines
Disassembly and Assembly
Governor Actuator
3500 GENERATOR SET ENGINES
Governor Actuator Drive
3500 GENERATOR SET ENGINES
Governor Fastener Group
3500 GENERATOR SET ENGINES
Fuel Injectors
3500 GENERATOR SET ENGINES
Fuel Injection Control Linkage
3500 GENERATOR SET ENGINES
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Lubricate Clamp When Installing Unit Injector Assemblies{1290}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
New Rocker Arm Shaft Assembly and Bolts Used{1102}
1988/09/05
One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Check Valve Added To Fuel Injection Lines {1274}
1989/05/22
New Connector With An Orifice Added To Fuel Injection Lines Groups To Help Prevent Cavitation{1274}
1989/06/26
Improved Control Rod Assembly Used In Fuel Injection Control Groups{1298}
1989/07/24
New Fuel Injectors Available For Parts Service{1290}
1989/08/28
Fuel Injector Reference For 3500 Family Of Engines{1290}
1989/10/02
New Fuel Injector Assemblies Used{1290}
1989/10/16
New Plug Used In Front Housing For Fuel Injection Control Group{1151,1298}
1990/03/05
Some Fuel Injectors May Be Used In Mixed Sets {1290}
1990/05/21
New, Longer Bolt Gives Better Retention To Fuel Injection Lines {1252}
1990/05/28
New 7C9580 Fuel Injector (Type 2) Available To Replace 2W5201 Fuel Injector (Type 1) {1290}
1990/06/11
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
New Return Spring Used In Unit Injectors {1290}
1991/07/22
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New And Remanufactured Fuel Injector Reference{1290}
1992/05/18
Modifying Former 2W8888 Rocker Arm Shaft For Use With New 8T7581 Rocker Arm Shaft Bolt{1102}
1992/12/21
New And Remanufactured Fuel Injector Reference {1290}
1993/01/18
New Fuel Injector Group Help Reduce Plunger And Barrel Seizures{1290}
1993/05/31
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20
Fuel Dilution In The Engine Oil{1290,1318}
1994/05/16
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Improved Fuel Priming Pump Used
1987/05/01
Fuel Priming Pump Available As An Attachment
1988/12/01
Operation and Maintenance Manual
Fuel System - Prime
3500 Industrial and Generator Set Engines
Special Instruction
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
Fuel Priming Pump Available As An Attachment{1258}
1988/11/21
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing
1984/04/11
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improvements For Caterpillar 3161 Governors
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor
1990/10/01
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors
1991/04/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
New 3161 Governor With Improved Fuel Limiter
1993/09/01
New Seals Extend Life of Fuel Transfer Pump{1256}
1994/11/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Fuel Transfer Pump Group Is Used {1256}
2002/11/01
A New Fuel Transfer Pump is Used {1256}
2004/10/01
New Fuel Transfer Pump {1256}
2005/09/26
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
Installation and Adjustment of 3161 Governor on 3500 Family of Engines{1264}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
3500 Electronic Unit Injection (EUI) Fuel Priming Procedure{1250, 1258}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Fuel Transfer Pump
3500 Generator Set Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Systems Operation
Fuel Transfer Pump
3500 Generator Set Engines
Testing and Adjusting
Fuel Pressure
3500 Generator Set Engines
Disassembly and Assembly
Fuel Transfer Pump
3500 GENERATOR SET ENGINES
Governor Actuator Drive
3500 GENERATOR SET ENGINES
Governor Fastener Group
3500 GENERATOR SET ENGINES
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Bolt Used Instead Of Stud In Governor Fastener Group To Prevent Damage To Governor Housing {1264,1287}
1984/04/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Improvements For Caterpillar 3161 Governors{1264}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
Remanufactured Type 1 Fuel Injector Assembly Available For 3500 Family Of Engines Equipped With UG8 Governors {1254,1264}
1991/04/01
End Clearance Specification Changed For Front Shaft In Fuel Injection Control{1251,1258}
1991/10/14
New 3161 Governor With Improved Fuel Limiter{1264}
1993/09/20
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Engine News
New Check Valve Available{1063,1355}
1994/04/18
New Water And Oil Temperature Regulators Available{1330,1355}
1994/12/01
Service Magazine
New Water Regulator Prevents Leakage{1355,1393}
1990/06/25
New Jacket Water Heater Groups Have New Thermostat{1355,1383}
1990/06/25
Check Valves Require Periodic Maintenance {1355,1063}
1993/09/13
Improved Jacket Water Heater Thermostat{1355}
1993/09/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group
1990/12/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Manual Stop Procedure
3500 Industrial and Generator Set Engines
Emergency Stopping
3500 Industrial and Generator Set Engines
Special Instruction
Installation of 7E5253 Governor Control Assembly{1265}
Installation of 7E5253 Governor Control Assembly{1265}
Specifications
Shutoff Control Group Identification
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Shutoff Control Group
3500 SERIES ENGINES HYDRAMECHANICAL PROTECTIVE SYSTEM
Manual Shutoff
3500 Generator Set Engines
Fuel Shutoff
3500 Generator Set Engines
Disassembly and Assembly
Manual Shutoff
3500 GENERATOR SET ENGINES
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Shorter Rack Shutoff Solenoids Available {1259}
1993/03/01
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
3500 Industrial and Generator Set Engines
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Temperature Sensor Pocket Kit Available For Danfoss&reg; Temperature Contactors {1350,7403}
1989/08/07
Engine News
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
4C8753 Extended Collet Available: Problems With 8T1002 Probe For Fuel Setting
1991/01/01
Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/04/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New &quot;On Engine&quot; Adjustment Procedure For 3161 Woodward Governor {1264,0782}
1990/10/22
4C8753 Extended Collet Available; Problems With 8T1002 Probe For Fuel Setting{0782}
1991/01/14
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

Caterpillar 3508, Stationary Generator Sets, Construction
61,000 
Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
307.208 
Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3508, Industrial engines, Construction
84,962 
Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction


 
145.548 
Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.