AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3406 Industrial Engine Natural Gas 4FD00001-UP FUEL SYSTEM Caterpillar SIS



GAS ENGINE G3406 GAS ENGINE 4FD
 G3406 Industrial Engine Natural Gas 4FD00001-UP SEBP1772 G3406 4FD   (1987)

Parts group G3406:

  For full view, you need register
FUEL SYSTEM
CARBURETOR GP
BODY AS-CARBURETOR
154-9630 BODY AS-CARBURETOR
154-9630 BODY AS-CARBURETOR
S/N 4FD1-UP
PART OF 136-3089 CARBURETOR GP
AN ATTACHMENT
BODY AS-CARBURETOR
7E-1593 BODY AS-CARBURETOR
7E-1593 BODY AS-CARBURETOR
S/N 4FD1-UP
PART OF 121-7043, 159-8337, 7E-5427 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
113-8461 CARBURETOR GP
113-8461 CARBURETOR GP
S/N 4FD1-UP
AN ATTACHMENT
CARBURETOR GP
121-7042 CARBURETOR GP
121-7042 CARBURETOR GP
S/N 4FD1-UP
AN ATTACHMENT
CARBURETOR GP
121-7043 CARBURETOR GP
121-7043 CARBURETOR GP
S/N 4FD1-UP
PART OF 121-7042 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
134-2960 CARBURETOR GP
134-2960 CARBURETOR GP
S/N 4FD1-UP
AN ATTACHMENT
CARBURETOR GP
134-5130 CARBURETOR GP
134-5130 CARBURETOR GP
S/N 4FD1-UP
AN ATTACHMENT
CARBURETOR GP
135-0454 CARBURETOR GP
135-0454 CARBURETOR GP
S/N 4FD1-UP
PART OF 134-5130, 137-4587, 137-4590 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
136-3089 CARBURETOR GP
136-3089 CARBURETOR GP
S/N 4FD1-UP
PART OF 134-2960 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
137-4587 CARBURETOR GP
137-4587 CARBURETOR GP
S/N 4FD1-UP
FIELD INSTALLATION
CARBURETOR GP
137-4590 CARBURETOR GP
137-4590 CARBURETOR GP
S/N 4FD1-UP
FIELD INSTALLATION
CARBURETOR GP
159-8337 CARBURETOR GP
159-8337 CARBURETOR GP
S/N 4FD1-UP
PART OF 9Y-9812 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
7E-0523 CARBURETOR GP
7E-0523 CARBURETOR GP -LOW PRESSURE NATURAL GAS
S/N 4FD1-UP
AN ATTACHMENT
CARBURETOR GP
7E-5427 CARBURETOR GP
7E-5427 CARBURETOR GP
S/N 4FD1-UP
PART OF 9Y-9812 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
7W-9636 CARBURETOR GP
7W-9636 CARBURETOR GP
S/N 4FD1-UP
NATURAL GAS
PART OF 113-8461, 7W-9652 CARBURETOR GP
AN ATTACHMENT
CARBURETOR GP
7W-9652 CARBURETOR GP
7W-9652 CARBURETOR GP
S/N 4FD1-UP
NATURAL GAS
AN ATTACHMENT
CARBURETOR GP
9Y-9812 CARBURETOR GP
9Y-9812 CARBURETOR GP
S/N 4FD1-UP
LOW PRESSURE GAS
Type 1
AN ATTACHMENT
CARBURETOR GP
9Y-9812 CARBURETOR GP
9Y-9812 CARBURETOR GP
S/N 4FD1-UP
LOW PRESSURE GAS
Type 2
AN ATTACHMENT
CONTROL GP-CARBURETOR
109-6931 CONTROL GP-CARBURETOR
109-6931 CONTROL GP-CARBURETOR
S/N 4FD1-UP
AN ATTACHMENT
CONTROL GP-CARBURETOR
128-8727 CONTROL GP-CARBURETOR
128-8727 CONTROL GP-CARBURETOR
S/N 4FD1-UP
AN ATTACHMENT
CONTROL GP-CARBURETOR
7C-1053 CONTROL GP-CARBURETOR
7C-1053 CONTROL GP-CARBURETOR
S/N 4FD1-UP
FOR USE WITH PSG GOVERNOR
AN ATTACHMENT
CONTROL GP-CARBURETOR
9Y-4170 CONTROL GP-CARBURETOR
9Y-4170 CONTROL GP-CARBURETOR
S/N 4FD1-UP
FOR USE WITH WOODWARD 1724 GOVERNOR
AN ATTACHMENT
142-1470 KIT-CARBURETOR
142-1470 KIT-CARBURETOR
S/N 4FD1-UP
PART OF 156-5735 VALVE GP-GAS CONTROL
AN ATTACHMENT
CONTROL GP-FUEL
ACTUATOR GP-ELECTRONIC
141-3204 ACTUATOR GP-ELECTRONIC
141-3204 ACTUATOR GP-ELECTRONIC
S/N 4FD1-UP
AN ATTACHMENT
7E-8396 CONTROL GP-FUEL
7E-8396 CONTROL GP-FUEL -AUXILIARY
S/N 4FD1-UP
PART OF 103-4773 PANEL AR-CONTROL
AN ATTACHMENT
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
S/N 4FD1-UP
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
VALVE GP-GAS CONTROL
156-5735 VALVE GP-GAS CONTROL
156-5735 VALVE GP-GAS CONTROL
S/N 4FD1-UP
PART OF 121-7043, 159-8337, 7E-0523, 7E-5427 CARBURETOR GP
FOR USE WITH SIDEDRAFT CARBURETOR
AN ATTACHMENT
CONTROL GP-FUEL RATIO
REGULATOR AS-GAS PRESSURE
349-8809 REGULATOR AS-GAS PRESSURE
349-8809 REGULATOR AS-GAS PRESSURE
S/N 4FD3709-UP
PART OF 135-5122 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
378-1958 REGULATOR AS-GAS PRESSURE
378-1958 REGULATOR AS-GAS PRESSURE
S/N 4FD3749-UP
PART OF 252-7918 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
7C-9735 REGULATOR AS-GAS PRESSURE
7C-9735 REGULATOR AS-GAS PRESSURE
S/N 4FD1-3708
PART OF 121-7041, 134-5131, 135-5122, 146-6228, 252-7918, 7C-1046 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
9Y-3053 REGULATOR AS-GAS PRESSURE
9Y-3053 REGULATOR AS-GAS PRESSURE
S/N 4FD1-4338
PART OF 9Y-3052 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
CONTROL GP-GOVERNOR
ACTUATOR AS-GOVERNOR
7E-0598 ACTUATOR AS-GOVERNOR
7E-0598 ACTUATOR AS-GOVERNOR
S/N 4FD1-UP
24 VOLT
AN ATTACHMENT
ACTUATOR GP-ELECTRONIC
141-3204 ACTUATOR GP-ELECTRONIC
141-3204 ACTUATOR GP-ELECTRONIC
S/N 4FD1-UP
AN ATTACHMENT
BOX AS-GOVERNOR PREREGULATOR
4W-5391 BOX AS-GOVERNOR PREREGULATOR
4W-5391 BOX AS-GOVERNOR PREREGULATOR
S/N 4FD1-UP
PART OF 4W-9314 GOVERNOR AS-ELECTRONIC
AN ATTACHMENT
CONTROL AS-GOVERNOR
128-8044 CONTROL AS-GOVERNOR
128-8044 CONTROL AS-GOVERNOR
S/N 4FD1-UP
START FUEL LIMIT
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5451 CONTROL AS-GOVERNOR
131-5451 CONTROL AS-GOVERNOR -SPEED CONTROL
S/N 4FD1-UP
PART OF 4P-6554 GOVERNOR AS-ELECTRONIC
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5452 CONTROL AS-GOVERNOR
131-5452 CONTROL AS-GOVERNOR -SPEED CONTROL
S/N 4FD1-UP
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5456 CONTROL AS-GOVERNOR
131-5456 CONTROL AS-GOVERNOR -SPEED CONTROL
S/N 4FD1-UP
WITH START FUEL LIMIT
AN ATTACHMENT
CONTROL AS-GOVERNOR
131-5567 CONTROL AS-GOVERNOR
131-5567 CONTROL AS-GOVERNOR -LOAD SHARE
S/N 4FD1-UP
AN ATTACHMENT
CONTROL AS-GOVERNOR
141-3208 CONTROL AS-GOVERNOR
141-3208 CONTROL AS-GOVERNOR
S/N 4FD1-UP
AN ATTACHMENT
CONTROL AS-GOVERNOR
7E-2467 CONTROL AS-GOVERNOR
7E-2467 CONTROL AS-GOVERNOR
S/N 4FD1-UP
FOR USE WITH SI ENGINES
AN ATTACHMENT
CONTROL AS-GOVERNOR
7E-2583 CONTROL AS-GOVERNOR
7E-2583 CONTROL AS-GOVERNOR
S/N 4FD1-UP
LOAD SENSOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
141-3207 CONTROL GP-GOVERNOR
141-3207 CONTROL GP-GOVERNOR
S/N 4FD1-UP
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3828 CONTROL GP-GOVERNOR
4N-3828 CONTROL GP-GOVERNOR
S/N 4FD1-UP
REMOTE & POSITIVE LOCKING
PART OF 9Y-1308 CONTROL GP-GOVERNOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
S/N 4FD1-UP
POSITIVE LOCK & VERNIER
PART OF 4N-3831 CONTROL GP-GOVERNOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
S/N 4FD1-UP
POSITIVE LOCK
PART OF 4N-3835 CONTROL GP-GOVERNOR
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3831 CONTROL GP-GOVERNOR
4N-3831 CONTROL GP-GOVERNOR
S/N 4FD1-UP
VERNIER & POSITIVE LOCKING
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3835 CONTROL GP-GOVERNOR
4N-3835 CONTROL GP-GOVERNOR
S/N 4FD1-UP
AN ATTACHMENT
CONTROL GP-GOVERNOR
9Y-1308 CONTROL GP-GOVERNOR
9Y-1308 CONTROL GP-GOVERNOR
S/N 4FD1-UP
FOR USE WITH SPARK IGNITED ENGINES
AN ATTACHMENT
MOUNTING GP-GOVERNOR ACTUATOR
9Y-4172 MOUNTING GP-GOVERNOR ACTUATOR
9Y-4172 MOUNTING GP-GOVERNOR ACTUATOR
S/N 4FD1-UP
AN ATTACHMENT
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
4N-5675 DRIVE GP-TACHOMETER
4N-5675 DRIVE GP-TACHOMETER
S/N 4FD1-UP
DUAL
PART OF 102-9268 SHUTOFF GP-ELECTRICAL
AN ATTACHMENT
DRIVE GP-TACHOMETER
504-2964 DRIVE GP-TACHOMETER
504-2964 DRIVE GP-TACHOMETER
S/N 4FD1-UP
AN ATTACHMENT
DRIVE GP-TACHOMETER
5N-3117 DRIVE GP-TACHOMETER
5N-3117 DRIVE GP-TACHOMETER
S/N 4FD1-UP
PROVIDES A SINGLE STRAIGHT THROUGH DRIVE,TURNING AT HALF ENGINE SPEED AND ANTI ENGINE ROTATION
PART OF 102-9268, 9Y-3645 SHUTOFF GP-ELECTRICAL
CANNOT BE USED WITH TACH DRIVE MOUNTED SERVICE METER STRAIT
AN ATTACHMENT
FILTER GP-FUEL
FILTER GP-FUEL
321-6969 FILTER GP-FUEL
321-6969 FILTER GP-FUEL
S/N 4FD1-UP
AN ATTACHMENT
FILTER GP-FUEL
321-6970 FILTER GP-FUEL
321-6970 FILTER GP-FUEL
S/N 4FD1-UP
AN ATTACHMENT
4P-4716 FILTER GP-FUEL
4P-4716 FILTER GP-FUEL
S/N 4FD1-UP
FOR USE WITH GAS REGULATOR
AN ATTACHMENT
GOVERNOR GP
ACTUATOR AS-GOVERNOR
7E-0598 ACTUATOR AS-GOVERNOR
7E-0598 ACTUATOR AS-GOVERNOR
S/N 4FD1-UP
24 VOLT
AN ATTACHMENT
CONVERSION GP-GOVERNOR DRIVE
493-5783 CONVERSION GP-GOVERNOR DRIVE
493-5783 CONVERSION GP-GOVERNOR DRIVE
S/N 4FD1-UP
AN ATTACHMENT
CONVERSION GP-GOVERNOR DRIVE
9Y-9840 CONVERSION GP-GOVERNOR DRIVE
9Y-9840 CONVERSION GP-GOVERNOR DRIVE
S/N 4FD1-UP
AN ATTACHMENT
DRIVE GP-GOVERNOR
128-1926 DRIVE GP-GOVERNOR
128-1926 DRIVE GP-GOVERNOR
S/N 4FD1-UP
AN ATTACHMENT
DRIVE GP-GOVERNOR
179-9581 DRIVE GP-GOVERNOR
179-9581 DRIVE GP-GOVERNOR
S/N 4FD1-2142
AN ATTACHMENT
DRIVE GP-GOVERNOR
179-9581 DRIVE GP-GOVERNOR
179-9581 DRIVE GP-GOVERNOR
S/N 4FD2143-UP
AN ATTACHMENT
DRIVE GP-GOVERNOR
184-5146 DRIVE GP-GOVERNOR
184-5146 DRIVE GP-GOVERNOR
S/N 4FD1-2142
AN ATTACHMENT
DRIVE GP-GOVERNOR
184-5146 DRIVE GP-GOVERNOR
184-5146 DRIVE GP-GOVERNOR
S/N 4FD2143-UP
AN ATTACHMENT
DRIVE GP-GOVERNOR
191-9373 DRIVE GP-GOVERNOR
191-9373 DRIVE GP-GOVERNOR
S/N 4FD1-UP
FOR USE WITH ALTRONIC DISN EIS AND MECHANICAL HOURMETER OR MECHANICAL OVERSPEED SHUTOFF SWITCH
AN ATTACHMENT
DRIVE GP-GOVERNOR
191-9374 DRIVE GP-GOVERNOR
191-9374 DRIVE GP-GOVERNOR
S/N 4FD1-UP
FOR USE WITH ALTRONIC DISN EIS
CANNOT BE USED WITH MECHANICAL HOURMETER OR MECHANICAL OVERSPEED SHUTOFF SWITCH
AN ATTACHMENT
DRIVE GP-GOVERNOR & MAGNETO
7W-2096 DRIVE GP-GOVERNOR & MAGNETO
7W-2096 DRIVE GP-GOVERNOR & MAGNETO
S/N 4FD1-175
DRIVE GP-GOVERNOR & MAGNETO
7W-2096 DRIVE GP-GOVERNOR & MAGNETO
7W-2096 DRIVE GP-GOVERNOR & MAGNETO
S/N 4FD176-2137; 4FD2139-2142; 4FD2634-UP
FASTENER GP-GOVERNOR
9Y-3375 FASTENER GP-GOVERNOR
9Y-3375 FASTENER GP-GOVERNOR
S/N 4FD1-UP
AN ATTACHMENT
GOVERNOR AS
231-4723 GOVERNOR AS
231-4723 GOVERNOR AS
S/N 4FD1-UP
FOR USE WITH NATURALLY ASPIRATED INDUSTRIAL ENGINES
AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
4P-2788 GOVERNOR AS-ELECTRONIC
4P-2788 GOVERNOR AS-ELECTRONIC
S/N 4FD1-UP
PART OF 103-4773, 4P-4898 PANEL AR-CONTROL
FOR USE WITH EMCP II CONTROL PANEL AND WOODWARD EG3P ACTUATOR
AN ATTACHMENT
4P-4897 GOVERNOR AS-ELECTRONIC
4P-4897 GOVERNOR AS-ELECTRONIC
S/N 4FD1-UP
PART OF 4P-4898 PANEL AR-CONTROL
FOR USE WITH SI PACKAGE GENSETS
AN ATTACHMENT
4P-4899 GOVERNOR AS-ELECTRONIC
4P-4899 GOVERNOR AS-ELECTRONIC
S/N 4FD1-UP
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
4P-6554 GOVERNOR AS-ELECTRONIC
4P-6554 GOVERNOR AS-ELECTRONIC
S/N 4FD1-UP
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
4W-9313 GOVERNOR AS-ELECTRONIC
4W-9313 GOVERNOR AS-ELECTRONIC
S/N 4FD1-UP
STANDBY
PART OF 103-4773, 7W-2411 PANEL AR-CONTROL
AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
4W-9314 GOVERNOR AS-ELECTRONIC
4W-9314 GOVERNOR AS-ELECTRONIC
S/N 4FD1-UP
STANDBY WITH PREREGULATOR
PART OF 103-4773, 7W-2411 PANEL AR-CONTROL
AN ATTACHMENT
GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
7E-1232 GOVERNOR AS-ELECTRONIC
S/N 4FD1-UP
PART OF 103-4773 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@103-1582@@@@@
AN ATTACHMENT
GOVERNOR GP
132-7463 GOVERNOR GP
132-7463 GOVERNOR GP
S/N 4FD1-UP
PART OF 7C-9715 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP
132-7464 GOVERNOR GP
132-7464 GOVERNOR GP
S/N 4FD1-UP
PART OF 7C-9707 GOVERNOR GP-ELECTRIC
AN ATTACHMENT
GOVERNOR GP
157-0961 GOVERNOR GP
157-0961 GOVERNOR GP
S/N 4FD1-UP
AN ATTACHMENT
GOVERNOR GP
7C-9715 GOVERNOR GP
7C-9715 GOVERNOR GP
S/N 4FD1-UP
PSG MECHANICAL
Type 1
AN ATTACHMENT
GOVERNOR GP
7C-9715 GOVERNOR GP
7C-9715 GOVERNOR GP
S/N 4FD1-UP
PSG MECHANICAL
Type 2
AN ATTACHMENT
GOVERNOR GP
7C-9715 GOVERNOR GP
7C-9715 GOVERNOR GP
S/N 4FD1-UP
PSG MECHANICAL
Type 3
AN ATTACHMENT
GOVERNOR GP
9Y-0472 GOVERNOR GP
9Y-0472 GOVERNOR GP
S/N 4FD1-UP
24 VOLT
PART OF 7C-9707 GOVERNOR GP-ELECTRIC
AN ATTACHMENT
GOVERNOR GP
9Y-0473 GOVERNOR GP
9Y-0473 GOVERNOR GP
S/N 4FD1-UP
PART OF 7C-9715 GOVERNOR GP
AN ATTACHMENT
GOVERNOR GP-ELECTRIC
7C-9707 GOVERNOR GP-ELECTRIC
7C-9707 GOVERNOR GP-ELECTRIC -WOODWARD PSG
S/N 4FD1-UP
Type 1
AN ATTACHMENT
GOVERNOR GP-ELECTRIC
7C-9707 GOVERNOR GP-ELECTRIC
7C-9707 GOVERNOR GP-ELECTRIC -WOODWARD PSG
S/N 4FD1-UP
Type 2
AN ATTACHMENT
166-9271 GOVERNOR GP-ELECTRONIC
166-9271 GOVERNOR GP-ELECTRONIC
S/N 4FD1-UP
AN ATTACHMENT
GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
S/N 4FD1-UP
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
S/N 4FD1-UP
WITH PREREGULATOR
PART OF 4P-4898 PANEL AR-CONTROL
AN ATTACHMENT
234-4358 INSTALLATION GP-GOVERNOR
234-4358 INSTALLATION GP-GOVERNOR
S/N 4FD1-UP
HYDRA-MECHANICAL
FOR USE WITH SI GOVERNOR AS
AN ATTACHMENT
INSTALLATION GP-GOVERNOR
262-4933 INSTALLATION GP-GOVERNOR
262-4933 INSTALLATION GP-GOVERNOR
S/N 4FD1-UP
AN ATTACHMENT
MOUNTING GP-GOVERNOR ACTUATOR
9Y-4172 MOUNTING GP-GOVERNOR ACTUATOR
9Y-4172 MOUNTING GP-GOVERNOR ACTUATOR
S/N 4FD1-UP
AN ATTACHMENT
PUMP GP-FUEL TRANSFER
COVER GP-FUEL TRANSFER
4W-1727 COVER GP-FUEL TRANSFER
4W-1727 COVER GP-FUEL TRANSFER
S/N 4FD1-UP
PART OF 121-3890 CONTROL GP-ELECTRONIC, 140-0016 CONTROL GP-ENGINE MONITORING, 102-9269, 102-9270, 4P-5475, 4P-6639, 9Y-3644 SHUTOFF GP-ELECTRICAL
CANNOT BE USED WITH TACH DRIVE AND/OR SERVICE METER
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
133-0558 KIT-GAS VALVE
133-0558 KIT-GAS VALVE
S/N 4FD1-UP
FOR USE WITH 11:1 COMPRESSION AT 1200 RPM WITH RICH BURN
FIELD INSTALLATION
138-7191 KIT-GAS VALVE
138-7191 KIT-GAS VALVE
S/N 4FD1-UP
FOR USE WITH 11:1 COMPRESSION AT 1200 RPM WITH LEAN BURN
FIELD INSTALLATION
148-7193 KIT-GAS VALVE
148-7193 KIT-GAS VALVE
S/N 4FD1-UP
HORIZONTAL FLOW
FOR USE WITH DIGESTER GAS VALVE
FIELD INSTALLATION
6I-1562 KIT-GAS VALVE
6I-1562 KIT-GAS VALVE
S/N 4FD1-UP
AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
349-8809 REGULATOR AS-GAS PRESSURE
349-8809 REGULATOR AS-GAS PRESSURE
S/N 4FD3709-UP
PART OF 135-5122 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
378-1958 REGULATOR AS-GAS PRESSURE
378-1958 REGULATOR AS-GAS PRESSURE
S/N 4FD3749-UP
PART OF 252-7918 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
7C-9735 REGULATOR AS-GAS PRESSURE
7C-9735 REGULATOR AS-GAS PRESSURE
S/N 4FD1-3708
PART OF 121-7041, 134-5131, 135-5122, 146-6228, 252-7918, 7C-1046 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR AS-GAS PRESSURE
9Y-3053 REGULATOR AS-GAS PRESSURE
9Y-3053 REGULATOR AS-GAS PRESSURE
S/N 4FD1-4338
PART OF 9Y-3052 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
121-7041 REGULATOR GP-GAS PRESSURE
121-7041 REGULATOR GP-GAS PRESSURE
S/N 4FD1-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
134-2961 REGULATOR GP-GAS PRESSURE
134-2961 REGULATOR GP-GAS PRESSURE
S/N 4FD1-3117
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
134-2961 REGULATOR GP-GAS PRESSURE
134-2961 REGULATOR GP-GAS PRESSURE
S/N 4FD3118-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
134-5131 REGULATOR GP-GAS PRESSURE
134-5131 REGULATOR GP-GAS PRESSURE
S/N 4FD1-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
135-5122 REGULATOR GP-GAS PRESSURE
135-5122 REGULATOR GP-GAS PRESSURE
S/N 4FD1-3708
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
135-5122 REGULATOR GP-GAS PRESSURE
135-5122 REGULATOR GP-GAS PRESSURE
S/N 4FD3709-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
146-6228 REGULATOR GP-GAS PRESSURE
146-6228 REGULATOR GP-GAS PRESSURE
S/N 4FD1-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
252-7918 REGULATOR GP-GAS PRESSURE
252-7918 REGULATOR GP-GAS PRESSURE
S/N 4FD1-3748
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
252-7918 REGULATOR GP-GAS PRESSURE
252-7918 REGULATOR GP-GAS PRESSURE
S/N 4FD3749-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
4P-2680 REGULATOR GP-GAS PRESSURE
4P-2680 REGULATOR GP-GAS PRESSURE
S/N 4FD1-UP
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
4P-2866 REGULATOR GP-GAS PRESSURE
4P-2866 REGULATOR GP-GAS PRESSURE
S/N 4FD1-UP
PART OF 4P-2680 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
7C-1046 REGULATOR GP-GAS PRESSURE
7C-1046 REGULATOR GP-GAS PRESSURE
S/N 4FD1-UP
NATURAL GAS
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
9Y-3052 REGULATOR GP-GAS PRESSURE
9Y-3052 REGULATOR GP-GAS PRESSURE
S/N 4FD1-4338
AN ATTACHMENT
REGULATOR GP-GAS PRESSURE
9Y-3052 REGULATOR GP-GAS PRESSURE
9Y-3052 REGULATOR GP-GAS PRESSURE
S/N 4FD4339-UP
AN ATTACHMENT
SHUTOFF GP
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
S/N 4FD1-UP
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
VALVE GP
VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
1N-9306 VALVE AS-GAS SHUTOFF
S/N 4FD1-UP
FOR USE WITH CAPACITOR DISCHARGE IGNITION SYSTEM (E271,267,161)
AN ATTACHMENT
VALVE GP-CONTROL
VALVE GP-GAS CONTROL
156-5735 VALVE GP-GAS CONTROL
156-5735 VALVE GP-GAS CONTROL
S/N 4FD1-UP
PART OF 121-7043, 159-8337, 7E-0523, 7E-5427 CARBURETOR GP
FOR USE WITH SIDEDRAFT CARBURETOR
AN ATTACHMENT
VALVE GP-SOLENOID
VALVE GP-SOLENOID
538-8794 VALVE GP-SOLENOID
538-8794 VALVE GP-SOLENOID
S/N 4FD1-UP
24-VOLT
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
New IMPCO 400 Single Varifuel Carburetor Replaces Former IMPCO 200D Double Carburetor {1266}
1997/02/17
157-3253 Spring In IMPCO Varifuel Carburetor Air Body Assembly Available For Parts Service{1266}
1998/06/01
New Carburetor Improves Engine Performance {1266}
1998/09/01
Be Sure To Order The Correct Diaphragm For Servicing The Mixer Of The Carburetor {1266}
2002/03/01
Systems Operation
Carburetor
G3406 Engine
Testing and Adjusting
Carburetor - Adjust
G3406 Engine
Disassembly and Assembly
Carburetor (High Pressure Gas)
3406 SPARK IGNITED ENGINE
Carburetor (Low Pressure Gas)
3406 SPARK IGNITED ENGINE
Throttle Body
3406 SPARK IGNITED ENGINE
Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2010/10/08
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Engine News
New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Conversion Gas Valve Kits Available{1278}
1996/10/01
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Governor Control Assembly Helps Prevent Overspeed On Startup{1264}
1995/11/20
New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12
New Electronic Actuator Group (Flo-Tech 68) Provides Improved Stability{1907}
1997/05/01
Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2010/10/08
A New Speed Controller and Actuator Are Available for Certain G3400 and G3500 Engines {1264, 1716, 1908}
2015/09/25
Special Instruction
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Governor Control
G3406 Engines
Disassembly and Assembly
Overspeed Shutoff
3406 SPARK IGNITED ENGINE
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Specifications
Governor Fastener
G3406 Engines
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/03/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Improved Seal on Fuel Filter {1261}
2007/07/30
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel Filter Differential Pressure - Check
G3406 Engine
Special Instruction
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
Installation and Maintenance of the Microfilter for Natural Gas {1261}
Installation and Maintenance of the Microfilter for Natural Gas {1261}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/01/28
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
General Service Information
Chapter 1 General Information
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON
Chapter 2 Installation
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON
Chapter 3 Calibration and Operation
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON
Chapter 4 Description of Operation
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON
Chapter 5 Troubleshooting
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON
Chapter 6 Repair and Replacement
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON
General Information
PSG GOVERNOR WITH CAST IRON CASE
Installation
PSG GOVERNOR WITH CAST IRON CASE
Principles of Operation
PSG GOVERNOR WITH CAST IRON CASE
Troubleshooting and Maintenance
PSG GOVERNOR WITH CAST IRON CASE
Replacement Parts
PSG GOVERNOR WITH CAST IRON CASE
Auxiliary Equipment
PSG GOVERNOR WITH CAST IRON CASE
Repair and Replacement
PSG GOVERNOR WITH CAST IRON CASE
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Governor Control Assembly Helps Prevent Overspeed On Startup{1264}
1995/11/20
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Proper Placement of the Speed Control for Some Gas Engines {1264, 1716, 1908}
2010/10/08
A New Speed Controller and Actuator Are Available for Certain G3400 and G3500 Engines {1264, 1716, 1908}
2015/09/25
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
G3406 Engine
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor Drive
G3406 Engines
Governor
G3406 Engines
Governor Fastener
G3406 Engines
Governor Control
G3406 Engines
Governor Linkage - Woodward governor 1724
G3406 Engines
Governor Linkage - PSG Governor
G3406 Engines
Governor Linkage - Woodward Hydra-mechanical Governor
G3406 Engines
Systems Operation
Governor
G3406 Engine
Testing and Adjusting
Governor - Adjust
G3406 Engine
Disassembly and Assembly
Governor Drive Group
3406 SPARK IGNITED ENGINE
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/03/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Conversion Gas Valve Kits Available{1278}
1996/10/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Special Instruction
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
Installation and Maintenance of Gaseous Fuel Filters{1261, 1262}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/03/01
Gas Engine Fuel Specifications {1280}
1998/01/20
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Boost Line Hose Assemblies Withstand Higher Temperatures{1081,1057,1088,7554}
1991/01/07
Special Instruction SEHS9298 Gives Installation And Maintenance Information For Gaseous Fuel Filters{1261,1262}
1991/01/28
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Camshafts Provide Increased Power, Reduced Fuel Consumption, Reduced Exhaust Temperature, And Reduced Emissions{1210}
1991/09/09
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Engine News
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
Operation and Maintenance Manual
Gas Pressure Regulator Condensation - Drain
G3406 Engine
Gas Pressure Regulator - Test
G3406 Engine
Service Letter-NACD
Product Improvement Program For Replacing The Gas Pressure Regulator On Certain G3406 Engines
Product Improvement Program For Replacing The Gas Pressure Regulator On Certain G3406 Engines
Service Letter-CSARL
Service Letter-Americas
Specifications
Gas Pressure Regulator
G3406 Engines
Systems Operation
Gas Pressure Regulator
G3406 Engine
Testing and Adjusting
Gas Pressure
G3406 Engine
Disassembly and Assembly
Gas Pressure Regulator Assembly
3406 SPARK IGNITED ENGINE
Service Magazine
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Operation and Maintenance Manual
Manual Stop Procedure
G3406 Engine
Emergency Stopping
G3406 Engine
Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Disassembly and Assembly
Throttle Body
3406 SPARK IGNITED ENGINE
Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25
Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions
1980/05/14
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Gas Regulator Setting Tool Group Available {0782}
1987/07/20
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Four New Contact Points Added To 5P6524 Engine Timing Indicator Group{0653}
1978/08/07
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Engine News
A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704}
A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

Truck sale:

Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
99,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.