AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-0741 CRANKSHAFT GP S/N 4FD238-UP G3406 GAS ENGINE


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP

GAS ENGINE G3406 GAS ENGINE 4FD
 G3406 Industrial Engine Natural Gas 4FD00001-UP SEBP1772 G3406 4FD   (1987)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT AS
1W-6207 CRANKSHAFT AS
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
CRANKSHAFT GP
251-2303 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
243-6718 KIT-CRANKSHAFT BEARING
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
 

#SEBP17720050
 

4N-0741: CRANKSHAFT GP

4N-0741 CRANKSHAFT GP
S/N 4FD238-UP
i00122071 SEBP1772
4N0741 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
2. 6I-1453 [1] CRANKSHAFT AS  
2A. 1W-9302 [1] GEAR-CRANKSHAFT (80-TEETH)  
2B. 7S-5005 [1] DOWEL  
2C. 4N-0684 [1] DOWEL  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720051
 

202-1257: CYLINDER BLOCK AS

202-1257 CYLINDER BLOCK AS
S/N 4FD2404-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP
i01570723 SEBP1772
2021257 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8081 [7] CAP-CRANKSHAFT BEARING  
2. 167-8083 [14] BOLT (7/8-14X7.5-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP17720052
 

463-3536: CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS
S/N 4FD2404-UP
PART OF 202-1258 CYLINDER BLOCK GP
i06280842 SEBP1772
4633536 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0685 [6] BUSHING (1-IN WIDE)  
2. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
3. 202-1257 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720053
 

105-5420: CYLINDER BLOCK GP

105-5420 CYLINDER BLOCK GP
S/N 4FD442-905
i00481442 SEBP1772
1055420 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2992 [6] TUBE AS  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 B [1] PLUG-PIPE  
4. 100-7399 [1] PLUG  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [1] PLUG-CUP  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 6I-2981 [1] PLATE-BLOCK  
16. 6I-4024 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
19. 2M-9780 [2] SEAL-O-RING  
20. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
21. 7E-6479 [6] BOLT-SPECIAL (OIL JET)  
22. 4N-0685 [6] BUSHING (1-IN WIDE)  
23. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
24. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
25. 9S-8009 [1] PLUG-O-RING  
26. 4K-1388 [1] SEAL-O-RING  
27. 3E-6747 [1] SEAL-O-RING  
28. 4P-2092 [1] CYLINDER BLOCK AS  
29. 2W-6000 [6] LINER-CYLINDER BLOCK  
30. 3E-6777 [18] SEAL-O-RING  
31. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
32. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
33. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
34. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
  101-0523 AFH INSERT-LINER SEAT (5.21-MM THK)(5.21MM THK)  
    (H-FOR SALVAGE OF DAMAGED LIFTER BORES IN CYL BLOCK. QUANTITY TO BE DETERMINED BY USER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  H  
 

#SEBP17720054
 

108-3914: CYLINDER BLOCK GP

108-3914 CYLINDER BLOCK GP
S/N 4FD560-UP
PART OF 108-3916 CYLINDER BLOCK GP
i00482453 SEBP1772
1083914 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
2. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP17720055
 

108-3916: CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP
S/N 4FD560-UP
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@
FIELD INSTALLATION
i00123090 SEBP1772
1083916 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-5155 [1] SEAL-O-RING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 [1] PLUG-PIPE  
4. 9S-8009 [3] PLUG-O-RING  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 9X-7378 [1] SEAL-O-RING  
13. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
14. 4N-0685 [6] BUSHING (1-IN WIDE)  
15. 7X-7732 [6] PLUG-PIPE  
16. 114-4427 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 108-3914 Y [1] CYLINDER BLOCK GP  
19. 3E-6747 [2] SEAL-O-RING  
20. 100-7399 [2] PLUG  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720056
 

110-2099: CYLINDER BLOCK GP

110-2099 CYLINDER BLOCK GP
S/N 4FD472-1557
i00494513 SEBP1772
1102099 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2992 [6] TUBE AS  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 B [1] PLUG-PIPE  
4. 100-7399 [1] PLUG  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [1] PLUG-CUP  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 6I-2981 [1] PLATE-BLOCK  
16. 6I-4024 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
19. 2M-9780 [2] SEAL-O-RING  
20. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
21. 111-8606 [6] BOLT-SPECIAL (OIL JET)  
22. 4N-0685 [6] BUSHING (1-IN WIDE)  
23. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
24. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
25. 9S-8009 [1] PLUG-O-RING  
26. 4K-1388 [1] SEAL-O-RING  
27. 3E-6747 [1] SEAL-O-RING  
28. 108-3913 [1] CYLINDER BLOCK AS  
29. 2W-6000 [6] LINER-CYLINDER BLOCK  
30. 110-2220 [6] SEAL-LINER  
31. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
32. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
33. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
34. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
35. 142-7072 [6] SEAL-LINER  
36. 142-6217 [6] SEAL-O-RING  
  101-0523 ABFH INSERT-LINER SEAT (5.21-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  H   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYL BLOCK. QUANTITY TO BE DETERMINED BY USER
 

#SEBP17720057
 

110-2099: CYLINDER BLOCK GP

110-2099 CYLINDER BLOCK GP
S/N 4FD1558-2403
i00762310 SEBP1772
1102099 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-9540 [2] DOWEL  
2. 2M-6471 [1] PLUG-CUP  
3. 2M-9780 [2] SEAL-O-RING  
4. 3E-6747 [1] SEAL-O-RING  
5. 3S-5496 [2] SEAL-O-RING  
6. 4K-1388 [1] SEAL-O-RING  
7. 4N-0683 [4] DOWEL  
8. 4N-1650 [2] DOWEL  
9. 4W-8585 [1] COVER  
10. 6I-2981 [1] PLATE-BLOCK  
11. 6I-4024 [1] GASKET-PLATE  
12. 7W-6081 [1] GASKET  
13. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
14. 7W-6534 B [1] PLUG-PIPE  
15. 8S-9094 [1] PLUG-ORIFICE  
16. 8T-6757 [3] PLUG-PIPE  
17. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
18. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
19. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
20. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
21. 9S-8009 [1] PLUG-O-RING  
22. 030-7571 [4] BOLT (3/8-16X1-IN)  
23. 100-7399 [1] PLUG  
24. 151-5925 [6] BOLT (7/16-14-THD)  
25. 152-7646 Y [1] CYLINDER BLOCK GP  
26. 155-4011 [6] TUBE AS  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720058
 

110-2099: CYLINDER BLOCK GP

110-2099 CYLINDER BLOCK GP
S/N 4FD2404-UP
i01539196 SEBP1772
1102099 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-9540 [2] DOWEL  
2. 2M-6471 [2] PLUG-CUP  
3. 309-5131 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8006 [1] PLUG (7/8-14-THD)  
  238-5081 [1] SEAL-O-RING  
5. 3S-5496 [2] SEAL-O-RING  
6. 330-9730 [1] PLUG AS  
  9S-8009 [1] PLUG-O-RING  
  238-5083 [1] SEAL-O-RING  
7. 4N-0683 [4] DOWEL  
8. 4N-1650 [2] DOWEL  
9. 4W-8585 [1] COVER  
10. 6I-2981 [1] PLATE-BLOCK  
11. 6I-4024 [1] GASKET-PLATE  
12. 7W-6081 [1] GASKET  
13. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
15. 8S-9094 [1] PLUG-ORIFICE  
16. 8T-6757 [3] PLUG-PIPE  
17. 8T-6763 C [4] PLUG-PIPE (1/4-18-THD)  
18. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
19. 7W-6534 [7] PLUG-PIPE  
22. 030-7571 [4] BOLT (3/8-16X1-IN)  
23. 151-5925 [6] BOLT (7/16-14-THD)  
24. 155-4011 [6] TUBE AS  
25. 202-1258 CY [1] CYLINDER BLOCK GP  
26. 307-2671 [1] PLUG AS  
  9S-8002 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720059
 

152-7642: CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 4FD560-UP
Type 1
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@
FIELD INSTALLATION
i00729861 SEBP1772
1527642 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 152-7644 Y [1] CYLINDER BLOCK GP  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
6. 119-5155 [1] SEAL-O-RING  
7. 030-7571 [4] BOLT (3/8-16X1-IN)  
8. 4W-8585 [1] COVER  
9. 7W-6081 [1] GASKET  
11. 8S-9094 [1] PLUG-ORIFICE  
12. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
13. 114-4427 [2] SEAL-O-RING  
14. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
15. 4N-0685 [6] BUSHING (1-IN WIDE)  
16. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
17. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
18. 9S-8009 [1] PLUG-O-RING  
19. 100-7399 [2] PLUG  
20. 3E-6747 [2] SEAL-O-RING  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
22. 9X-7378 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Crankshaft Seal Usage On 3400 Series Engines
1986/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Oil Holes In Crankshaft Main And Rod Journals
1992/10/01
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/09/01
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing is Now Used {1203}
2007/07/02
Use Reuse and Salvage Guidelines for Measurements of Crankshafts which Includes the Crankshaft of the Remanufactured Engine with the Serial Number Prefix 1WW {1202}
2006/10/09
A New Type of Main Bearing is Now Used {1202, 1203}
2008/07/14
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2013/08/21
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3406 Engine
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Connecting Rod and Main Bearing Journals
G3406 Engines
Crankshaft
G3406 Engines
Systems Operation
Crankshaft
G3406 Engine
Testing and Adjusting
Crankshaft Position for Valve Lash Setting
G3406 Engine
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3406 SPARK IGNITED ENGINE
Crankshaft Rear Seal And Wear Sleeve
3406 SPARK IGNITED ENGINE
Crankshaft Main Bearings
3406 SPARK IGNITED ENGINE
Crankshaft
3406 SPARK IGNITED ENGINE
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}

Caterpillar Parts SIS Catalog G3406 :

CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
251-2303 CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
CRANKSHAFT AS
1W-6207 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
7W-8956 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
6I-0925 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
105-5420 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP

Truck sale:

Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
99,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.