AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

152-7642 CYLINDER BLOCK GP S/N 4FD560-UP Type 2 FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@ FIELD INSTALLATION G3406


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

GAS ENGINE G3406 GAS ENGINE 4FD
 G3406 Industrial Engine Natural Gas 4FD00001-UP SEBP1772 G3406 4FD   (1987)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
 

#SEBP17720060
 

152-7642: CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 4FD560-UP
Type 2
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@
FIELD INSTALLATION
i01625329 SEBP1772
1527642 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 202-1257 CY [1] CYLINDER BLOCK AS  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
6. 119-5155 [1] SEAL-O-RING  
7. 030-7571 [4] BOLT (3/8-16X1-IN)  
8. 4W-8585 [1] COVER  
9. 7W-6081 [1] GASKET  
11. 8S-9094 [1] PLUG-ORIFICE  
12. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
13. 114-4427 [2] SEAL-O-RING  
14. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
15. 4N-0685 [6] BUSHING (1-IN WIDE)(MARKED X)  
16. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
17. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
18. 9S-8009 [1] PLUG-O-RING  
19. 100-7399 [2] PLUG  
20. 250-0466 [2] SEAL-O-RING  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
22. 9X-7378 [1] SEAL-O-RING  
   
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)  
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720061
 

152-7644: CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP
S/N 4FD560-UP
PART OF 152-7642 CYLINDER BLOCK GP
i00734657 SEBP1772
1527644 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
3. 4N-0795 [7] CAP-CRANKSHAFT BEARING  
 

#SEBP17720062
 

152-7646: CYLINDER BLOCK GP

152-7646 CYLINDER BLOCK GP
S/N 4FD1558-2403
PART OF 110-2099 CYLINDER BLOCK GP
i00734532 SEBP1772
1527646 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-9322 [6] LINER-CYLINDER BLOCK  
2. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
3. 110-2220 [6] SEAL-LINER  
4. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
5. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
6. 4N-5857 [7] CAP-CRANKSHAFT BEARING (MAIN BEARING)  
7. 142-7072 [6] SEAL-LINER  
8. 142-6217 [6] SEAL-O-RING  
10. 4N-0685 [6] BUSHING (1-IN WIDE)  
11. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
 

#SEBP17720063
 

202-1258: CYLINDER BLOCK GP

202-1258 CYLINDER BLOCK GP
S/N 4FD2404-UP
PART OF 110-2099 CYLINDER BLOCK GP
i01538305 SEBP1772
2021258 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
2. 197-9322 [6] LINER-CYLINDER BLOCK  
3. 463-3536 Y [1] CYLINDER BLOCK AS  
4. 110-2220 [6] SEAL-LINER  
5. 142-6217 [6] SEAL-O-RING  
6. 142-7072 [6] SEAL-LINER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720064
 

4P-3720: CYLINDER BLOCK GP

4P-3720 CYLINDER BLOCK GP
S/N 4FD209-559
FIELD REPLACEMENT FOR @@@@@ 8N-9267@@@@@
FIELD INSTALLATION
i00147180 SEBP1772
4P3720 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-1388 [1] SEAL-O-RING  
2. 9F-2247 [3] PLUG-PIPE  
3. 7M-7410 [1] PLUG-PIPE  
4. 9S-8009 [3] PLUG-O-RING  
5. 7H-3171 [3] PLUG-PIPE  
6. 4P-2098 [1] CYLINDER BLOCK AS  
  4N-5857 [1] CAP-CRANKSHAFT BEARING  
  3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
7. 5M-6214 [1] PLUG (1/8-27 PTF)  
8. 3J-5389 [1] PLUG (EXTERNAL)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [2] PLUG-CUP  
13. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
14. 4N-0685 [6] BUSHING (1-IN WIDE)  
15. 3J-5390 [6] PLUG (3/8-18-THD)  
16. 2M-9780 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
 

#SEBP17720065
 

8N-9267: CYLINDER BLOCK GP

8N-9267 CYLINDER BLOCK GP
S/N 4FD1-441
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6-111-8606 BOLT-SPECIAL, 6-290-6567 TUBE AS-OIL JET
i00147398 SEBP1772
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [6] JET AS-PISTON COOLING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7M-7410 B [1] PLUG-PIPE  
4. 2W-6000 [6] LINER-CYLINDER BLOCK  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [1] PLUG-CUP  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 6I-2981 [1] PLATE-BLOCK  
16. 6I-4024 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
19. 2M-9780 [1] SEAL-O-RING  
20. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
21. 7E-6479 [6] BOLT-SPECIAL (OIL JET)  
22. 4N-0685 [6] BUSHING (1-IN WIDE)  
23. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
24. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
25. 9S-8009 [1] PLUG-O-RING  
26. 4K-1388 [1] SEAL-O-RING  
27. 110-2220 [18] SEAL-LINER  
28. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
29. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
30. 4N-5857 [7] CAP-CRANKSHAFT BEARING  
31. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
32. 4W-4588 AH SLEEVE-LIFTER BORE  
  4W-6061 AJ SLEEVE  
33. 9S-4190 B [1] PLUG-O-RING (7/8-14-THD)  
34. 2M-9780 B [1] SEAL-O-RING  
35. 100-7399 [1] PLUG  
36. 3E-6747 [1] SEAL-O-RING  
   
  5N-0093 AFH INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 ABFH INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 ABFH INSERT-LINER SEAT (2.76-MM THK)  
  2W-3815 AFH INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 ABFH INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 ABFH INSERT-LINER SEAT (1.655-MM THK)  
  9Y-3368 AFH INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 ABFH INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 ABFH INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  H   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYL BLOCK. QUANTITY TO BE DETERMINED BY USER.
  J   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE. QUANTITY TO BE DETERMINED BY USER.
 

#SEBP17720066
 

123-7334: CYLINDER HEAD AS

123-7334 CYLINDER HEAD AS
S/N 4FD988-1567
PART OF 123-7335 CYLINDER HEAD GP
i00515027 SEBP1772
1237334 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7352 [12] INSERT-VALVE SEAT (INLET)(INLET)  
  133-9745 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  133-9746 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  133-9747 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  133-9748 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
2. 6I-4014 [12] INSERT-VALVE SEAT (EXHAUST)(EXHAUST)  
  6I-4015 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  6I-4016 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  6I-4017 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  6I-4018 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
3. 2M-6471 [1] PLUG-CUP  
4. 3B-0623 [10] PLUG-CUP  
5. 3B-0645 [12] PLUG-CUP  
6. 123-3984 [12] GUIDE-VALVE (INLET)  
6A. 123-3984 [12] GUIDE-VALVE (EXHAUST)  
7. 2N-5775 [12] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP17720067
 

151-1333: CYLINDER HEAD AS

151-1333 CYLINDER HEAD AS
S/N 4FD1568-1889
PART OF 123-7335 CYLINDER HEAD GP
i00773309 SEBP1772
1511333 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-5775 [12] DOWEL  
2. 122-7352 [12] INSERT-VALVE SEAT (INLET)  
  133-9745 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  133-9746 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  133-9747 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  133-9748 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 6I-4014 [12] INSERT-VALVE SEAT (EXHAUST)  
  6I-4015 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  6I-4016 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  6I-4017 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  6I-4018 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
6. 3B-0645 [12] PLUG-CUP  
7. 151-6235 [12] GUIDE-VALVE (INLET)  
7A. 151-6235 [12] GUIDE-VALVE (EXHAUST)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP17720068
 

199-3207: CYLINDER HEAD AS

199-3207 CYLINDER HEAD AS
S/N 4FD1890-UP
PART OF 199-3208 CYLINDER HEAD GP
i01481524 SEBP1772
1993207 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [1] PLUG-CUP  
2. 2N-5775 [12] DOWEL  
3. 3B-0623 [10] PLUG-CUP  
4. 3B-0645 [12] PLUG-CUP  
6. 122-7352 [12] INSERT-VALVE SEAT (INLET)  
  133-9745 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  133-9746 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  133-9747 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  133-9748 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
7. 151-6235 [24] GUIDE-VALVE  
8. 198-6529 [12] INSERT-VALVE SEAT (EXHAUST)  
  200-4280 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  200-4281 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  200-4282 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  200-4283 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP17720069
 

6I-3600: CYLINDER HEAD AS

6I-3600 CYLINDER HEAD AS
S/N 4FD343-987
PART OF 6I-3599 CYLINDER HEAD GP
i00397416 SEBP1772
6I3600 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4014 [12] INSERT-VALVE SEAT (EXHAUST)  
  6I-4015 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  6I-4016 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  6I-4017 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  6I-4018 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
2. 6I-4019 [12] INSERT-VALVE SEAT (INTAKE)  
  6I-4020 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  6I-4021 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  6I-4022 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  6I-4023 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 2M-6471 [1] PLUG-CUP  
4. 3B-0623 [10] PLUG-CUP  
5. 3B-0645 [12] PLUG-CUP  
6. 7E-3413 [24] GUIDE-VALVE  
7. 2N-5775 [12] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Liner Seat Insert Available
1983/08/17
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Cylinder Liner Available
1986/02/01
3400 Engine Major Component Performance Guide Available
1987/07/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Service Tips For Piston Cooling Jets (Tubes)
1990/12/01
Thinner Spacer Plates Available For Parts Service
1992/06/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
New Cylinder Liner Seal Resists Deterioration {1216}
1995/03/01
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/09/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16
New Piston Cooling Jet Tube Assembly Provides Increased Piston Clearance{1331}
1998/03/01
New Piston Cooling Jet Tube Assemblies Provide Increased Piston Clearance For Engines With Gallery Cooled Pistons{1331}
1998/12/01
Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/10/01
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/12/01
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2013/09/12
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2011/08/09
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Operation and Maintenance Manual
Cylinder Pressure - Test/Record
G3406 Engine
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Liner
G3406 Engines
Cylinder Block
G3406 Engines
Connecting Rod
G3406 Engines
Piston and Rings
G3406 Engines
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Systems Operation
Cylinder Block, Liners and Heads
G3406 Engine
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Testing and Adjusting
Cylinder Liner Projection
G3406 Engine
Cylinder Block
G3406 Engine
Disassembly and Assembly
Spacer Plate
3406 SPARK IGNITED ENGINE
Piston Cooling Tubes
3406 SPARK IGNITED ENGINE
Cylinder Liners
3406 SPARK IGNITED ENGINE
Camshaft Bearings
3406 SPARK IGNITED ENGINE
Crankshaft Main Bearings
3406 SPARK IGNITED ENGINE
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Cylinder Block Groups Used{1201}
1984/10/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04

Caterpillar Parts SIS Catalog G3406 :

CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
110-2099 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
CYLINDER BLOCK GP
105-5420 CYLINDER BLOCK GP
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4P-3720 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER HEAD AS
123-7334 CYLINDER HEAD AS
CYLINDER HEAD AS
151-1333 CYLINDER HEAD AS
CYLINDER HEAD AS
199-3207 CYLINDER HEAD AS

Truck sale:

Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
99,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.