AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-3598 CYLINDER HEAD GP S/N 4FD1890-2648 G3406 GAS ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-ACCESSORY

GAS ENGINE G3406 GAS ENGINE 4FD
 G3406 Industrial Engine Natural Gas 4FD00001-UP SEBP1772 G3406 4FD   (1987)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3599 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2474 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2475 CYLINDER HEAD GP
 

#SEBP17720090
 

6I-3598: CYLINDER HEAD GP

6I-3598 CYLINDER HEAD GP
S/N 4FD1890-2648
i01403348 SEBP1772
6I3598 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-3208 CY [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 6I-3066 [1] GASKET-CYLINDER HEAD  
4. 124-1855 [20] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
4A. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
5. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
6. 2N-7174 [6] GASKET  
7. 2S-2251 [6] SEAL-O-RING  
8. 212-7519 [6] ADAPTER AS  
9. 106-1792 [12] STUD-TAPERLOCK (3/8-16X4-IN)  
10. 7W-0917 [6] PLUG  
11. 3E-6772 [24] SEAL (WATER)  
12. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
13. 7W-6492 [4] PLUG-PIPE (1/2-14-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720091
 

6I-3599: CYLINDER HEAD GP

6I-3599 CYLINDER HEAD GP
S/N 4FD343-987
PART OF 6I-3598 CYLINDER HEAD GP
i00397392 SEBP1772
6I3599 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-3600 Y [1] CYLINDER HEAD AS  
2. 101-8314 [12] VALVE-EXHAUST  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
5. 4N-5906 [24] SPRING-VALVE  
6. 9Y-9804 [12] VALVE-INLET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720092
 

7W-2474: CYLINDER HEAD GP

7W-2474 CYLINDER HEAD GP
S/N 4FD1-342
PART OF 7W-2475 CYLINDER HEAD GP
i00431870 SEBP1772
7W2474 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2472 [1] CYLINDER HEAD AS  
2. 2N-5775 [12] DOWEL  
3. 7E-3413 [24] GUIDE-VALVE  
4. 4W-4325 [12] INSERT-VALVE SEAT (EXHAUST)  
  4P-1816 AB INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)  
  4P-1817 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  4P-1818 AB INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)  
  4P-1819 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
5. 4N-5893 [12] INSERT-VALVE SEAT (INLET)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
6. 2M-6471 [1] PLUG-CUP  
7. 3B-0623 [10] PLUG-CUP  
8. 3B-0645 [12] PLUG-CUP  
9. 2W-2443 [12] VALVE-EXHAUST  
10. 2A-4429 [48] LOCK-RETAINER  
11. 6N-7154 [24] ROTOCOIL AS  
12. 4N-5906 [24] SPRING-VALVE  
13. 4W-5374 [12] VALVE-INLET  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP17720093
 

7W-2475: CYLINDER HEAD GP

7W-2475 CYLINDER HEAD GP
S/N 4FD1-342
i00431871 SEBP1772
7W2475 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2474 Y [1] CYLINDER HEAD GP  
2. 6L-8562 [1] STUD-TAPERLOCK (3/8-16X1.77-IN)  
3. 7W-3860 [6] ADAPTER AS-PLUG  
4. 2S-2251 [6] SEAL-O-RING  
5. 2N-7174 [6] GASKET  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 3S-5496 [2] SEAL-O-RING  
8. 4W-1055 [24] SEAL  
9. 2H-3750 [20] BOLT (3/4-16X7.5-IN)  
10. 6I-3066 [1] GASKET-CYLINDER HEAD  
11. 3J-5390 [2] PLUG (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 3J-5389 [3] PLUG (EXTERNAL)  
14. 4S-6137 [11] STUD-TAPERLOCK (3/8-16X3.1-IN)  
15. 7W-0917 C [6] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17720094
 

494-6415: DAMPER & PULLEY GP

494-6415 DAMPER & PULLEY GP
S/N 4FD1-UP
AN ATTACHMENT
i07489067 SEBP1772
4946415 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1047 [1] PULLEY  
2. 167-8126 [1] DAMPER AS  
3. 177-9024 [1] ADAPTER-DAMPER  
4. 493-1222 [1] SHAFT-STUB  
5. 4D-3704 [6] WASHER-HARD (17X30X5-MM THK)  
6. 7H-5569 [6] BOLT (5/8-18X7.5-IN)  
7. 9F-2186 [1] KEY-WOODRUFF  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17720095
 

4P-5894: DAMPER & PULLEY GP

4P-5894 DAMPER & PULLEY GP
S/N 4FD238-UP
4-GROOVE PULLEY
i00384511 SEBP1772
4P5894 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-9024 [1] ADAPTER-DAMPER  
2. 167-8126 [1] DAMPER AS  
3. 6N-7378 [1] PULLEY-CRANKSHAFT (4-GROOVE)  
4. 8S-4753 [6] BOLT (5/8-18X8-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17720096
 

6N-7379: DAMPER & PULLEY GP

6N-7379 DAMPER & PULLEY GP
S/N 4FD1-237
i00388780 SEBP1772
6N7379 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-6998 [1] ADAPTER-DAMPER  
2. 2P-5149 [1] DAMPER AS  
3. 6N-7378 [1] PULLEY-CRANKSHAFT (4-GROOVE)  
4. 8S-4753 [6] BOLT (5/8-18X8-IN)  
 

#SEBP17720097
 

109-8921: DRIVE GP-ACCESSORY

109-8921 DRIVE GP-ACCESSORY
S/N 4FD1-UP
AN ATTACHMENT
i00493193 SEBP1772
1098921 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8432 [1] BEARING  
2. 129-3948 [1] SEAL-INTEGRAL  
3. 1N-3973 [1] GEAR (32-TEETH)  
4. 109-8914 [1] ADAPTER  
5. 030-7946 [1] ELBOW  
6. 2B-2695 [12] BOLT (5/16-18X0.875-IN)  
7. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8188 [2] NUT (1/2-13-THD)  
9. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 1N-3974 [1] COUPLING  
11. 1N-3975 [1] COVER-RETAINER  
12. 9X-8903 [1] STUD-TAPERLOCK (1/2-13X5.31-IN)  
13. 8P-1438 [1] COVER  
14. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
15. 9H-8872 [1] GASKET  
16. 5P-2424 [1] BOLT (1/2-13X2.25-IN)  
17. 2W-1838 [1] TUBE AS  
18. 7K-9197 [1] ELBOW  
19. 8L-6557 [1] CONNECTOR  
20. 9X-7378 [1] SEAL-O-RING  
 

#SEBP17720098
 

7C-1052: DRIVE GP-ACCESSORY

7C-1052 DRIVE GP-ACCESSORY
S/N 4FD1-UP
AN ATTACHMENT
i00398741 SEBP1772
7C1052 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8432 [1] BEARING (ACCESSORY DRIVE)  
  5P-2424 [1] BOLT (1/2-13X2.25-IN)  
2. 129-3948 [1] SEAL-INTEGRAL  
3. 1N-3973 [1] GEAR (32-TEETH)  
4. 7C-1051 [1] TUBE AS  
5. 4N-3852 [1] COVER-RETAINER  
6. 2B-2695 [12] BOLT (5/16-18X0.875-IN)  
7. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8188 [2] NUT (1/2-13-THD)  
9. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 1N-3974 [1] COUPLING  
11. 1N-3975 [1] COVER-RETAINER  
12. 9X-7378 [2] SEAL-O-RING  
13. 8P-1438 [1] COVER  
14. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
15. 9H-8872 [1] GASKET  
16. 030-7946 [1] ELBOW  
17. 5P-3426 [1] ELBOW  
18. 9X-8903 [1] STUD-TAPERLOCK (1/2-13X5.31-IN)  
 

#SEBP17720099
 

8N-9653: DRIVE GP-ACCESSORY

8N-9653 DRIVE GP-ACCESSORY
S/N 4FD1-UP
i00122480 SEBP1772
8N9653 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your G3406 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-0942 [1] ADAPTER AS  
  8N-9476 [1] SLEEVE  
  2M-2488 [3] STUD-TAPERLOCK (3/8-16X3.59-IN)  
  2M-1538 [3] STUD-TAPERLOCK (3/8-16X1.6-IN)  
  1M-3735 [1] DOWEL  
2. 1W-1898 [1] GASKET  
3. 8N-8259 [1] GEAR AS-IDLER  
  8N-8258 [1] BUSHING  
4. 8N-8256 [1] PLATE-THRUST  
5. 7W-4381 [1] SHAFT-IDLER  
6. 9S-8752 [6] NUT-FULL (3/8-16-THD)  
7. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 147-0182 [2] SEAL-O-RING  
9. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
10. 0L-2070 [5] BOLT (3/8-16X2.25-IN)  
11. 053-2294 [2] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
 

Information:

Engine News
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/03/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Oversized Intake And Exhaust Valve Seat Inserts Available For Spark-Ignited Engine Heads
1991/01/01
New Specification For Exhaust Valve Clearance
1991/05/01
New Head Assembly For Engines
1993/08/01
New Chrome Stem Exhaust Valves Available
1993/09/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Longer Exhaust Manifold Mounting Studs Used In Cylinder Head Group{1100}
1994/11/01
Improved Cylinder Head Group Components And Valve Mechanism Group Components Provide Increased Service Life{1100,1102,1103,1104,1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Stronger Cylinder Head Bolts Used{1100}
1996/05/09
New Inlet Valve Seat Inserts Provide Improved Serviceability And Reliability {1103,1100}
1996/08/19
New Valve Guides Improve Wear Resistance {1104}
1998/01/20
Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads{1100,0703}
1999/01/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
A New Cylinder Head Group Provides Increased Valve Life {1100, 1103}
2001/03/01
A New Cylinder Head Group Is Available {1100}
2002/10/01
New Cylinder Head Group {1100}
2004/07/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Improved O-Ring Seal for the Spark Plug Adapter {1100, 1555}
2006/03/13
An Improved Cylinder Head Is Used on G3406 Engines {1100}
2009/06/29
A Floating Valve Bridge and New Cylinder Head Groups Are Used for Certain CG137 and G3400 Engines {1100, 1102, 1121, 1123, 1209}
2012/06/01
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3406 Engine
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Procedure for the 223-6519 Cylinder Head Group or the 223-6521 Cylinder Head Group {1101, 1124}
Installation Procedure for the 223-6519 Cylinder Head Group or the 223-6521 Cylinder Head Group {1101, 1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Lubricant For Gas Engines
Lubricant For Gas Engines
Specifications
Cylinder Head
G3406 Engines
Cylinder Head Valves
G3406 Engines
Cylinder Head Valves
G3406 Engines
Cylinder Head
G3406 Engines
Cylinder Head Valves
G3406 Engines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
Service Letter-Asia
Systems Operation
Cylinder Block, Liners and Heads
G3406 Engine
Valve System Components
G3406 Engine
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CHANGE OF SERVICE FOR G3406 CYLINDER HEADS
CHANGE OF SERVICE FOR G3406 CYLINDER HEADS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER HEADS FOR ALL G3400 APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER HEADS FOR ALL G3400 APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS ON CERTAIN G3406 ENGINES
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
G3406 Engine
Disassembly and Assembly
Cylinder Head Assembly
3406 SPARK IGNITED ENGINE
Valves
3406 SPARK IGNITED ENGINE
Valve Seat Inserts
3406 SPARK IGNITED ENGINE
Bridge Dowels
3406 SPARK IGNITED ENGINE
Valve Guides
3406 SPARK IGNITED ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
Powdered Metal Valve Guides Provide Increased Service Life{1104}
1990/07/23
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Oversized Intake And Exhaust Valve Seat Inserts Available For Spark-Ignited Engine Heads{1103}
1990/12/24
New Specification For Exhaust Valve Clearance{1123,1121,1105}
1991/05/13
New Head Assembly For Engines{1100}
1993/08/30
New Chrome Stem Exhaust Valves Available {1105}
1993/09/13
Spark Plug Gaskets Available For Engines {1555}
1993/09/13
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads {1100,0703}
1999/03/08

Caterpillar Parts SIS Catalog G3406 :

CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3598 CYLINDER HEAD GP
CYLINDER HEAD GP
364-3477 CYLINDER HEAD GP
CYLINDER HEAD GP
364-3476 CYLINDER HEAD GP
CYLINDER HEAD GP
327-6910 CYLINDER HEAD GP
CYLINDER HEAD GP
300-5524 CYLINDER HEAD GP
CYLINDER HEAD GP
223-6522 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-3599 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2474 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2475 CYLINDER HEAD GP
DAMPER & PULLEY GP
494-6415 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
DAMPER & PULLEY GP
6N-7379 DAMPER & PULLEY GP
DRIVE GP-ACCESSORY
109-8921 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
7C-1052 DRIVE GP-ACCESSORY

Truck sale:

Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
99,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3406, Construction
90,000 
Caterpillar G3406, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.