AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-0106 CYLINDER HEAD GP S/N 02Z41994-64299 3208 TRUCK ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

TRUCK ENGINE 3208 TRUCK ENGINE 02Z
 3208 Truck Engine Turbocharged 02Z40745-UP SEBP1776 3208 02Z   (1980)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
1W-2282 CYLINDER HEAD GP
CYLINDER HEAD GP
7C-0106 CYLINDER HEAD GP
CYLINDER HEAD GP
7C-0106 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-9393 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
 

#SEBP17760200
 

7C-0106: CYLINDER HEAD GP

7C-0106 CYLINDER HEAD GP
S/N 02Z41994-64299
i00396510 SEBP1776
7C0106 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-9393 Y [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (1/2-13X5.25-IN)(LOCATION A)  
4. 7W-2059 C [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)(LEFT HEAD)  
6. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
7. 0L-1329 [8] BOLT (1/2-13X3-IN)(LOCATION E)  
8. 2B-2006 [12] BOLT (1/2-13X4.75-IN)(LOCATION F)  
9. 2B-0947 [8] BOLT (1/2-13X2.25-IN)(LOCATION G)  
10. 5M-6213 [4] PLUG-PIPE (1/4-18-THD)  
11. 3H-7654 [36] WASHER-HARD (13.5X22.5X3-MM THK)  
12. 4L-2768 [1] PLUG-PIPE  
13. 9L-9166 [1] STUD (3/8-16X3.63-IN)(RIGHT HEAD)  
14. 2B-0858 [2] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760201
 

7W-9393: CYLINDER HEAD GP

7W-9393 CYLINDER HEAD GP
S/N 02Z40745-64299
PART OF 7C-0106 CYLINDER HEAD GP
i00418722 SEBP1776
7W9393 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5496 [8] SPRING-VALVE OUTER  
2. 9N-5495 [8] SPRING-VALVE INNER  
3. 9N-5497 [8] RETAINER-VALVE SPRING  
4. 2A-4429 [16] LOCK-RETAINER  
5. 1W-9897 [8] WASHER-SPRING  
6. 119-6772 [4] VALVE-EXHAUST  
  7C-0362 [4] VALVE-INLET  
7. 7C-2296 CY [1] CYLINDER HEAD AS  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760202
 

9N-3600: CYLINDER HEAD GP

9N-3600 CYLINDER HEAD GP
S/N 02Z40745-41901; 02Z41903-41904; 02Z41906-41909; 02Z41911-41916; 02Z41918-41919; 02Z41921-41923; 02Z41925-41926; 02Z41928-41928; 02Z41930-41931; 02Z41933-41933; 02Z41935-41936; 02Z41938-41938; 02Z41940-41962; 02Z41964-41964; 02Z41967-41969; 02Z41971-41971; 02Z41973-41974; 02Z41976-41976; 02Z41978-41978; 02Z41980-41981; 02Z41983-41984; 02Z41986-41993
i00437082 SEBP1776
9N3600 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2282 Y [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (1/2-13X5.25-IN)(LOCATION A)  
4. 7W-2059 [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
6. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
7. 0L-1329 [8] BOLT (1/2-13X3-IN)(LOCATION E)  
8. 2B-2006 [12] BOLT (1/2-13X4.75-IN)(LOCATION F)  
9. 2B-0947 [8] BOLT (1/2-13X2.25-IN)(LOCATION G)  
10. 5M-6213 [4] PLUG-PIPE (1/4-18-THD)  
11. 3H-7654 [36] WASHER-HARD (13.5X22.5X3-MM THK)  
12. 2B-0858 [2] PLUG-PIPE  
13. 4L-2768 [1] PLUG-PIPE  
14. 9L-9166 [1] STUD (3/8-16X3.63-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760203
 

9N-3600: CYLINDER HEAD GP

9N-3600 CYLINDER HEAD GP
S/N 02Z41902-41902; 02Z41905-41905; 02Z41910-41910; 02Z41917-41917; 02Z41920-41920; 02Z41924-41924; 02Z41927-41927; 02Z41929-41929; 02Z41932-41932; 02Z41934-41934; 02Z41937-41937; 02Z41939-41939; 02Z41963-41963; 02Z41965-41966; 02Z41970-41970; 02Z41972-41972; 02Z41975-41975; 02Z41977-41977; 02Z41979-41979; 02Z41982-41982; 02Z41985-41985; 02Z41994-UP
i00437087 SEBP1776
9N3600 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2282 Y [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (1/2-13X5.25-IN)  
4. 7W-2059 C [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
6. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
7. 0L-1329 [8] BOLT (1/2-13X3-IN)(LOCATION E)  
8. 2B-2006 [12] BOLT (1/2-13X4.75-IN)  
9. 2B-0947 [8] BOLT (1/2-13X2.25-IN)  
10. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
11. 3H-7654 [36] WASHER-HARD (13.5X22.5X3-MM THK)  
12. 4L-2768 [1] PLUG-PIPE  
13. 8T-6765 B [1] PLUG-PIPE (1/4-18-THD)  
14. 2B-0858 [2] PLUG-PIPE  
15. 9L-9166 [1] STUD (3/8-16X3.63-IN)  
16. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760204
 

9N-6486: CYLINDER HEAD GP

9N-6486 CYLINDER HEAD GP
S/N 02Z40745-41993
i00439127 SEBP1776
9N6486 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3171 [1] PLUG-PIPE  
2. 5M-6213 C [2] PLUG-PIPE (1/4-18-THD)(LEFT HEAD)  
3. 0L-1329 [2] BOLT (1/2-13X3-IN)(LOCATION E)  
4. 3H-7654 [36] WASHER-HARD (13.5X22.5X3-MM THK)  
5. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
6. 6F-5282 [8] BOLT (1/2-13X5.25-IN)(LOCATION A)  
7. 2B-2006 [12] BOLT (1/2-13X4.75-IN)(LOCATION F)  
8. 2B-0947 [8] BOLT (1/2-13X2.25-IN)(LOCATION G)  
9. 9N-6620 Y [2] CYLINDER HEAD GP  
10. 0S-1571 [1] BOLT (3/8-16X1.75-IN)(LOCATION C LEFT HEAD)  
  9L-9166 [1] STUD (3/8-16X3.63-IN)(RIGHT HEAD)  
11. 9L-7657 [2] PLUG-CUP  
12. 2B-0858 [2] PLUG-PIPE  
13. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)(RIGHT HEAD)  
14. 4W-0045 C [2] GASKET-CYLINDER HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760205
 

9N-6486: CYLINDER HEAD GP

9N-6486 CYLINDER HEAD GP
S/N 02Z41994-66495
i00439137 SEBP1776
9N6486 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-2768 C [1] PLUG-PIPE (LEFT HEAD)  
2. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)(LEFT HEAD)  
3. 0L-1329 [2] BOLT (1/2-13X3-IN)(LOCATION E)  
4. 3H-7654 [36] WASHER-HARD (13.5X22.5X3-MM THK)  
5. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
6. 6F-5282 [8] BOLT (1/2-13X5.25-IN)(LOCATION A)  
7. 2B-2006 [12] BOLT (1/2-13X4.75-IN)(LOCATION F)  
8. 2B-0947 [8] BOLT (1/2-13X2.25-IN)(LOCATION G)  
9. 9N-6620 Y [2] CYLINDER HEAD GP  
10. 0S-1571 [1] BOLT (3/8-16X1.75-IN)(LOCATION C LEFT HEAD)  
  9L-9166 [1] STUD (3/8-16X3.63-IN)(RIGHT HEAD)  
11. 9L-7657 [2] PLUG-CUP  
12. 2B-0858 [2] PLUG-PIPE  
13. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)(RIGHT HEAD)  
14. 7C-1599 C [2] GASKET-CYLINDER HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760206
 

9N-6620: CYLINDER HEAD GP

9N-6620 CYLINDER HEAD GP
S/N 02Z40745-66495
PART OF 9N-6486 CYLINDER HEAD GP
Type 1
i00439246 SEBP1776
9N6620 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 9N-5497 [8] RETAINER-VALVE SPRING  
3. 9N-5496 [8] SPRING-VALVE OUTER  
4. 1W-9897 [8] WASHER-SPRING  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET (INTAKE)  
6. 7C-2295 Y [1] CYLINDER HEAD AS  
7. 9N-5495 [8] SPRING-VALVE INNER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760207
 

9N-6620: CYLINDER HEAD GP

9N-6620 CYLINDER HEAD GP
S/N 02Z40745-66495
PART OF 9N-6486 CYLINDER HEAD GP
Type 2
i00439249 SEBP1776
9N6620 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 9N-5497 [8] RETAINER-VALVE SPRING  
3. 9N-5496 [8] SPRING-VALVE OUTER  
4. 1W-9897 [8] WASHER-SPRING  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET (INTAKE)  
6. 7C-2296 Y [1] CYLINDER HEAD AS  
7. 9N-5495 [8] SPRING-VALVE INNER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760208
 

1W-6897: DAMPER & PULLEY GP

1W-6897 DAMPER & PULLEY GP
S/N 02Z40745-51892
i00353026 SEBP1776
1W6897 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1368 [1] BOLT (1-14X3.5-IN)  
2. 9N-0288 [1] WASHER  
3. 1W-6858 [1] DAMPER AS-CRANKSHAFT  
4. 9N-5592 [1] SHIELD-DUST  
5. 9N-0293 [1] POINTER-TIMING  
 

#SEBP17760209
 

1W-6897: DAMPER & PULLEY GP

1W-6897 DAMPER & PULLEY GP
S/N 02Z51893-66515
i00353028 SEBP1776
1W6897 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1368 [1] BOLT (1-14X3.5-IN)  
2. 9N-0288 [1] WASHER  
3. 7C-8117 C [1] DAMPER AS-CRANKSHAFT  
4. 9N-0293 [1] POINTER-TIMING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Truck Engine News
Larger Valve Springs
1981/05/12
Higher Torque Used With Later Head Bolts
1981/09/23
Separate Valve Stem Gauges Available
1982/06/23
Resurfaced Cylinder Blocks And Heads
1982/12/08
Improved Cylinder Head Gasket
1983/01/26
Engine Valve Stem "use Again " Specifications
1983/03/02
Valve Spring Retainers Now Have Thicker Flanges
1983/05/18
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/11/23
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1983/12/21
Improved Cylinder Head Gasket
1984/05/23
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets
1984/06/27
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Head Gasket Replacement Procedure
1985/07/01
Remanufactured Cylinder Head Group For Na Engines Must Not Be Installed On T Engines
1985/07/01
Improved Cylinder Head Gasket
1986/03/01
New Plastic Water Sleeve Used
1987/05/01
New Head Gasket Used
1989/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1993/12/01
New Chrome-Plated Stem On Exhaust Valve Increases Valve And Valve Guide Wear Life{1105,1100}
1997/06/23
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Engine News
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Installation of Head Gasket (With New Torque Procedure){1100}
Installation of Head Gasket (With New Torque Procedure){1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves
3208 DIESEL TRUCK ENGINE
Valve Seats And Inserts
3208 DIESEL TRUCK ENGINE
Cylinder Head
3208 DIESEL TRUCK ENGINE
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Cylinder Heads
3208 DIESEL TRUCK ENGINE
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/04/25
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Changes To Turbocharged Truck Engines For 1985{1000,1050,1052,1100,1200,1250,1252}
1985/03/25
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
New Plastic Water Sleeve Used{1380}
1987/05/18
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Used {1124}
1989/05/15
New Pistons Used With Two Keystone Compression Rings{1156,1205,1214,1215}
1989/06/19
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1994/01/10

Caterpillar Parts SIS Catalog 3208 :

CYLINDER HEAD GP
7C-0106 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-2282 CYLINDER HEAD GP
CYLINDER HEAD AS
7C-3807 CYLINDER HEAD AS
CYLINDER HEAD AS
7C-2320 CYLINDER HEAD AS
CYLINDER HEAD AS
7C-2296 CYLINDER HEAD AS
CYLINDER HEAD AS
7C-2295 CYLINDER HEAD AS
2W-1865 CYLINDER BLOCK GP-SHORT
CYLINDER BLOCK GP
9N-6356 CYLINDER BLOCK GP
CYLINDER HEAD GP
7W-9393 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6486 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6486 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6620 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-6620 CYLINDER HEAD GP
DAMPER & PULLEY GP
1W-6897 DAMPER & PULLEY GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.