AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-8964 PUMP GP-GOV & FUEL INJ S/N 02Z40745-43220 FIELD REPLACEMENT ORDER @@@@@ 7C-8972@@@@@, @@@@@ 9N-6055@@@@@, @@@@@ 9N-0683@@@@@ 3208


FUEL SYSTEM
GOVERNOR GP

TRUCK ENGINE 3208 TRUCK ENGINE 02Z
 3208 Truck Engine Turbocharged 02Z40745-UP SEBP1776 3208 02Z   (1980)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
7C-8962 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8963 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8964 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8965 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8966 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8967 PUMP GP-GOV & FUEL INJ
 

#SEBP17760450
 

7C-8964: PUMP GP-GOV & FUEL INJ

7C-8964 PUMP GP-GOV & FUEL INJ
S/N 02Z40745-43220
FIELD REPLACEMENT ORDER @@@@@ 7C-8972@@@@@, @@@@@ 9N-6055@@@@@, @@@@@ 9N-0683@@@@@
i00392835 SEBP1776
7C8964 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8965 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4W-9007 [1] PIN AS  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760451
 

7C-8965: PUMP GP-GOV & FUEL INJ

7C-8965 PUMP GP-GOV & FUEL INJ
PART OF 7C-8964 PUMP GP-GOV & FUEL INJ
i00392837 SEBP1776
7C8965 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6119 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)(INNER)  
3. 4N-0527 [1] SPRING  
4. 2M-5471 [2] BOLT  
5. 4N-0508 [1] GASKET-COVER  
6. 7C-8928 Y [1] PUMP GP-GOV & FUEL INJ  
7. 4N-1591 [1] COVER AS-SPRING HOUSING  
  6N-0411 [1] COVER-TORQUE SPRING  
8. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT (8-32-THD)  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
  8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
9. 2P-3200 [1] BOLT-WASHER HEAD  
  1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760452
 

7C-8966: PUMP GP-GOV & FUEL INJ

7C-8966 PUMP GP-GOV & FUEL INJ
S/N 02Z40745-42603
i00392840 SEBP1776
7C8966 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8967 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760453
 

7C-8967: PUMP GP-GOV & FUEL INJ

7C-8967 PUMP GP-GOV & FUEL INJ
PART OF 7C-8966 PUMP GP-GOV & FUEL INJ
i00392844 SEBP1776
7C8967 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5661 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)(INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT  
5. 166-0368 [1] GASKET  
6. 7C-8929 Y [1] PUMP GP-GOV & FUEL INJ  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 4B-2042 [1] NUT (8-32-THD)  
10. 3B-4501 [1] LOCKWASHER  
11. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
12. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760454
 

7C-8968: PUMP GP-GOV & FUEL INJ

7C-8968 PUMP GP-GOV & FUEL INJ
S/N 02Z40745-64299
i00392849 SEBP1776
7C8968 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8969 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760455
 

7C-8969: PUMP GP-GOV & FUEL INJ

7C-8969 PUMP GP-GOV & FUEL INJ
PART OF 7C-8968, 9Y-0592 PUMP GP-GOV & FUEL INJ
i00392852 SEBP1776
7C8969 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8930 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 166-0368 [1] GASKET  
4. 4N-0527 [1] SPRING  
5. 4N-5663 [1] SPRING (INNER)(INNER)  
6. 6N-2129 [1] SPRING-GOVERNOR (OUTER)(2 PINK STRIPES)  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 4B-2042 [1] NUT (8-32-THD)  
10. 3B-4501 [1] LOCKWASHER  
11. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
12. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760456
 

7C-8970: PUMP GP-GOV & FUEL INJ

7C-8970 PUMP GP-GOV & FUEL INJ
S/N 02Z40745-62816; 02Z62818-62874; 02Z62876-62910; 02Z62913-63351; 02Z63353-63534
i00392875 SEBP1776
7C8970 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8971 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760457
 

7C-8971: PUMP GP-GOV & FUEL INJ

7C-8971 PUMP GP-GOV & FUEL INJ
S/N 02Z40745-66135
PART OF 7C-8970, 9Y-4547, 9Y-4838 PUMP GP-GOV & FUEL INJ
i00392878 SEBP1776
7C8971 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8930 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 166-0368 [1] GASKET  
4. 4N-0527 [1] SPRING  
5. 4N-9226 [1] SPRING (OUTER)(OUTER)  
6. 4N-5663 [1] SPRING (INNER)(INNER)  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 4B-2042 [1] NUT (8-32-THD)  
10. 3B-4501 [1] LOCKWASHER  
11. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
12. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760458
 

7C-8972: PUMP GP-GOV & FUEL INJ

7C-8972 PUMP GP-GOV & FUEL INJ
LT-MHC
FIELD REPLACEMENT FOR @@@@@ 7C-8931@@@@@, @@@@@ 7C-8962@@@@@, @@@@@ 7C-8964@@@@@, @@@@@ 7C-8960@@@@@
FIELD INSTALLATION
i00392881 SEBP1776
7C8972 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8973 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9M-9729 [1] SEAL-O-RING  
3. 8M-8157 [1] SEAL-O-RING  
  8M-5661 F [1] SEAL-O-RING  
  9L-7630 F [2] GASKET  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760459
 

7C-8973: PUMP GP-GOV & FUEL INJ

7C-8973 PUMP GP-GOV & FUEL INJ
PART OF 7C-8972 PUMP GP-GOV & FUEL INJ
i00392889 SEBP1776
7C8973 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9226 [1] SPRING (OUTER)(OUTER)  
2. 4N-5663 [1] SPRING (INNER)(INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT  
5. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
6. 4N-8507 [1] COVER  
  2W-5447 [1] GASKET  
7. 6N-0509 Y [1] TORQUE CONTROL GP  
8. 4N-0443 [1] PIN-LOAD STOP  
9. 7C-8928 Y [1] PUMP GP-GOV & FUEL INJ  
10. 3L-5987 [1] COVER  
  6L-5773 [1] GASKET  
11. 165-6475 [1] COVER  
12. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
13. 4B-2042 [1] NUT (8-32-THD)  
  6N-0412 [1] SCREW AS-MACHINE  
  3B-4501 [1] LOCKWASHER  
  8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
  1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
14. 166-0368 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09
Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27
New Seal Used On Governor Control Shaft
1982/12/08
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1983/12/21
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Improved Governor Performance
1987/04/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/01
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Service Tools For Low Emission Truck Engines With EGR
1977/06/29
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 DIESEL TRUCK ENGINE
Governor
3208 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance Unit (3.5° and 5° unit)
3208 DIESEL TRUCK ENGINE
Drive Gear For The Injection Pump
3208 DIESEL TRUCK ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3208 DIESEL TRUCK ENGINE
Check Valve And Bypass Valve
3208 DIESEL TRUCK ENGINE
Fuel Injection Pumps
3208 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance
3208 DIESEL TRUCK ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Governor Performance{1264,1250}
1987/04/06
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
7C-8963 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8962 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8961 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8960 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8929 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8965 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8966 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8967 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8968 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8969 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8970 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8971 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8972 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.