AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-9889 PUMP GP-GOV & FUEL INJ S/N 02Z62506-67071 3208 TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
SEPARATOR GP-WATER

TRUCK ENGINE 3208 TRUCK ENGINE 02Z
 3208 Truck Engine Turbocharged 02Z40745-UP SEBP1776 3208 02Z   (1980)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
7C-8972 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8973 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9889 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9890 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9891 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-0592 PUMP GP-GOV & FUEL INJ
 

#SEBP17760460
 

7E-9889: PUMP GP-GOV & FUEL INJ

7E-9889 PUMP GP-GOV & FUEL INJ
S/N 02Z62506-67071
i00392093 SEBP1776
7E9889 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-9890 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760461
 

7E-9890: PUMP GP-GOV & FUEL INJ

7E-9890 PUMP GP-GOV & FUEL INJ
S/N 02Z62506-UP
PART OF 7E-9889 PUMP GP-GOV & FUEL INJ
i00392118 SEBP1776
7E9890 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9226 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT  
5. 166-0368 [1] GASKET  
6. 7E-9891 Y [1] PUMP GP-GOV & FUEL INJ  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT (8-32-THD)  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
  8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
9. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760462
 

7E-9891: PUMP GP-GOV & FUEL INJ

7E-9891 PUMP GP-GOV & FUEL INJ
S/N 02Z62506-UP
PART OF 7E-9890 PUMP GP-GOV & FUEL INJ
i00392123 SEBP1776
7E9891 PUMP GP-GOV & FUEL INJ Parts scheme 7E9891 PUMP GP-GOV & FUEL INJ Parts scheme 7E9891 PUMP GP-GOV & FUEL INJ Parts scheme 7E9891 PUMP GP-GOV & FUEL INJ Parts scheme 7E9891 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-3010 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
2. 9N-5862 [1] SPRING-LIFTER  
3. 4N-2728 [1] WASHER-RETAINING  
4. 7W-8039 [8] BONNET-VALVE  
  8N-1415 [8] SPRING-CHECK  
  1W-6987 [8] VALVE AS-CHECK  
  7C-9966 [8] INSERT  
5. 4N-0224 [8] RING-RETAINING  
6. 7W-8120 [8] BUSHING-TERMINAL  
7. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
8. 9N-5817 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 2M-5471 [2] BOLT  
11. 6N-1716 [1] VALVE AS  
12. 3J-7354 [1] SEAL-O-RING  
13. 9Y-0546 C [1] FLANGE AS  
14. 7E-5346 [1] VALVE AS  
15. 4N-0975 [1] GASKET-CHECK VALVE  
16. 4N-2773 [1] SHAFT AS-CONTROL  
17. 5S-0003 [1] NUT (5/16-18-THD)  
18. 4N-2708 [1] SETSCREW  
19. 4N-0528 [1] SHAFT-LEVER  
20. 4N-9828 [1] SHAFT AS-CONTROL  
21. 4N-3922 [1] LEVER AS  
22. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
23. 9N-5820 [8] LEVER-CONTROL  
24. 126-4144 [1] LEVER-SHAFT  
25. 124-5941 [1] SHAFT-CONTROL  
26. 7C-6201 [1] LEVER-SEAT  
27. 7C-6202 [1] LEVER  
28. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
  6L-3921 [1] WASHER-SPECIAL  
29. 6N-4176 [1] SETSCREW  
30. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
31. 4N-0523 [1] DOWEL-STOP SUPPORT  
32. 2D-6392 [2] SEAL-O-RING  
33. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
34. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
35. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
36. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
37. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
38. 8N-3946 [1] HOUSING AS-GOVERNOR  
39. 4N-2333 [1] PIN-SPRING  
40. 8S-6814 [2] PIN  
41. 9S-4182 [1] PLUG (7/16-20-THD)  
42. 3J-7354 [1] SEAL-O-RING  
43. 8N-3945 [1] BUSHING-TERMINAL  
44. 2W-4037 [1] SEAL-LIP TYPE  
45. 9Y-4966 C [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
46. 3H-0442 [1] SEAL-O-RING  
47. 128-7347 [1] LEVER AS-RISER  
48. 7X-2395 C [1] BOLT-LOCKING  
49. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
50. 3J-7354 [1] SEAL-O-RING  
51. 9S-4182 [1] PLUG (7/16-20-THD)  
52. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
53. 9S-9332 [1] FITTING-ELBOW  
54. 124-5939 [1] COVER-FUEL PUMP HOUSING  
55. 6D-3031 [4] SCREW-SOCKET HEAD (8-32X0.375-IN)  
56. 4N-0941 [1] LEVER-LIMITER  
57. 4N-0505 [1] GASKET-HOUSING  
58. 128-2974 [1] HOUSING AS (SHUT-OFF)  
  4N-3713 [1] SEAL-LIP TYPE  
59. 127-7139 [1] GASKET-TOP COVER  
60. 132-2117 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
61. 9N-5821 [2] DEFLECTOR-PULSE  
62. 4N-1826 [2] DOWEL  
63. 2D-6392 [2] SEAL-O-RING  
64. 4N-2333 [1] PIN-SPRING  
65. 8N-0984 [8] PIN-SPRING  
66. 4N-5481 [1] STUD  
67. 1P-4001 [1] FITTING  
68. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
69. 4N-0532 [1] GASKET-COVER  
70. 4N-0531 [1] COVER-IDLE SCREW  
71. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
72. 170-5705 [1] SHAFT-SHUTOFF  
73. 4N-0940 [1] LEVER-SHUTOFF  
74. 124-5942 [1] SHAFT-SOLENOID  
75. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
76. 4N-2954 [1] SLEEVE-CAMSHAFT  
77. 4N-1132 [1] BODY AS-TRANSFER PUMP  
78. 8S-6814 [1] PIN  
79. 4N-1584 [1] SEAL-LIP TYPE  
80. 4N-0636 [1] SEAL-LIP TYPE  
81. 8H-9804 [1] SHAFT-PUMP IDLER  
82. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
83. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
84. 5M-6509 [1] SEAL-O-RING  
85. 4N-1767 [1] VALVE-BYPASS  
86. 4N-0605 [1] SPRING  
87. 4N-4276 [1] SEAT-SPRING  
88. 4N-6408 [1] PISTON AS  
89. 4N-6406 [1] RING-SPACER  
90. 4N-6404 [1] RING-RETAINING  
91. 4N-6407 [1] SPOOL-DASHPOT  
92. 6N-2517 [1] SPRING-DASHPOT  
93. 2W-8623 [1] SEAT-SPRING  
94. 4N-0434 [1] RISER-GOVERNOR  
95. 4N-2927 [2] RACE-THRUST BEARING  
  7M-7219 [1] BEARING-THRUST  
96. 4N-2953 [1] RING-LOCK  
97. 4N-3779 [1] KEY-CAMSHAFT  
98. 7E-4534 [1] CAMSHAFT AS  
99. 8N-2663 [1] CARRIER-WEIGHT  
100. 8N-2662 [3] BOLT-SOCKET HEAD  
101. 4N-1723 [1] SHIELD-CARRIER  
102. 4N-0425 [3] WEIGHT-GOVERNOR  
103. 4N-0511 [3] DOWEL  
104. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
105. 4N-9019 [1] DOWEL  
106. 9N-5822 [1] WASHER-THRUST  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17760463
 

9Y-0592: PUMP GP-GOV & FUEL INJ

9Y-0592 PUMP GP-GOV & FUEL INJ
S/N 02Z40745-66212
i00436946 SEBP1776
9Y0592 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8969 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4W-9007 [1] PIN AS  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760464
 

9Y-4547: PUMP GP-GOV & FUEL INJ

9Y-4547 PUMP GP-GOV & FUEL INJ
S/N 02Z40745-65154
i00442240 SEBP1776
9Y4547 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8971 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7W-7260 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760465
 

9Y-4838: PUMP GP-GOV & FUEL INJ

9Y-4838 PUMP GP-GOV & FUEL INJ
S/N 02Z60622-66135
i00442547 SEBP1776
9Y4838 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-8971 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760466
 

9Y-4838: PUMP GP-GOV & FUEL INJ

9Y-4838 PUMP GP-GOV & FUEL INJ
S/N 02Z66136-66515; 02Z66527-67071
i00442551 SEBP1776
9Y4838 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17760467
 

1N-3465: SEPARATOR GP-WATER

1N-3465 SEPARATOR GP-WATER
S/N 02Z40745-66410
PART OF 2W-6320 SEPARATOR GP-WATER
i00352095 SEBP1776
1N3465 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5419 [1] BRACKET  
2. 8N-9801 [1] BASE-SEPARATOR  
3. 8N-9803 [1] FILTER-FUEL (WATER SEPARATOR)  
4. 8N-9802 [1] CLAMP  
5. 0S-1594 [2] BOLT (3/8-16X1-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1D-4717 [2] NUT (3/8-16-THD)  
8. 8K-0968 [1] ELBOW  
9. 6V-6967 [1] TEE-O-RING PORT  
10. 6V-2611 [2] VALVE (DRAIN)  
11. 3K-8460 [2] PLUG (1/2-20-THD)  
12. 1J-9671 [6] SEAL-O-RING  
 

#SEBP17760468
 

2W-1408: SEPARATOR GP-WATER

2W-1408 SEPARATOR GP-WATER
PART OF 9N-5621 SEPARATOR GP-WATER
ALSO AN ATTACHMENT
i00357934 SEBP1776
2W1408 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9802 [1] CLAMP  
2. 6V-2611 [2] VALVE (DRAIN)  
3. 8N-9803 [1] FILTER-FUEL (WATER SEPARATOR)  
4. 8N-9801 [1] BASE-SEPARATOR  
5. 0S-1594 [2] BOLT (3/8-16X1-IN)  
6. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 1D-4717 [2] NUT (3/8-16-THD)  
8. 9N-5419 [1] BRACKET  
9. 1J-9671 [4] SEAL-O-RING  
10. 8K-0968 [1] ELBOW  
11. 3K-8460 [1] PLUG (1/2-20-THD)  
 

#SEBP17760469
 

2W-6320: SEPARATOR GP-WATER

2W-6320 SEPARATOR GP-WATER
S/N 02Z40745-66410
i00359825 SEBP1776
2W6320 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3465 Y [1] SEPARATOR GP-WATER  
2. 1D-4540 [3] BOLT (5/16-18X2.75-IN)  
3. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 9F-8219 [3] SPACER (1.25-IN THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09
Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27
New Seal Used On Governor Control Shaft
1982/12/08
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1983/12/21
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Improved Governor Performance
1987/04/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/01
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Service Tools For Low Emission Truck Engines With EGR
1977/06/29
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 DIESEL TRUCK ENGINE
Governor
3208 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance Unit (3.5° and 5° unit)
3208 DIESEL TRUCK ENGINE
Drive Gear For The Injection Pump
3208 DIESEL TRUCK ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3208 DIESEL TRUCK ENGINE
Check Valve And Bypass Valve
3208 DIESEL TRUCK ENGINE
Fuel Injection Pumps
3208 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance
3208 DIESEL TRUCK ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Governor Performance{1264,1250}
1987/04/06
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
7C-8973 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8972 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8971 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8970 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8969 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8968 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8967 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8966 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9890 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9891 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-0592 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-4547 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-4838 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-4838 PUMP GP-GOV & FUEL INJ
SEPARATOR GP-WATER
1N-3465 SEPARATOR GP-WATER
SEPARATOR GP-WATER
2W-1408 SEPARATOR GP-WATER

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.