AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W3813 SEAL GP-CRANKSHAFT TYPE 1 3512 GEN SET ENGINE


BASIC ENGINE
CRANKSHAFT GP
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

GEN SET ENGINE 3512 GEN SET ENGINE 3YF
 3512 ENGINE GENERATOR SET 3YF00001-UP SEBP1779 3512 3YF   (1988)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
8N-7103 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
 

#SEBP17790020
 

7W-3813: SEAL GP-CRANKSHAFT

7W3813 SEAL GP-CRANKSHAFT
TYPE 1
c652485 SEBP1779
7W3813 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-3809 J [1] SEAL GP-CRANKSHAFT  
2. 6I-3810 L [1] SEAL GP-CRANKSHAFT  
   
    L- INSTALL IN FLYWHEEL
    HSG ON STD ROTATION
    ENGINES & IN FRONT HSG
    ON REVERSE ROTATION
    ENGINES
   
    J - INSTALL IN FRONT HSG
    ON STD ROTATION ENGINES
    & IN FLYWHEEL HSG ON
    REVERSE ROTATION ENGINES
 

#SEBP17790021
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
SEBP17790021 SEBP1779
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
    CYLINDER BLOCK NOT REBORED
    CRANKSHAFT GROUND FOR UNDERSIZE
    MAIN BEARING I.D. OF:
   
  4W-5705 [7] 0.63 MM  
  4W-5706 [7] 1.27 MM  
   
    CYLINDER BLOCK REBORED (0.63 MM)
    (FOR BEARING OVERSIZE O.D.)
    CRANKSHAFT GROUND FOR UNDERSIZE
    MAIN BEARING I.D. OF :
   
  4W-5708 [7] 0 (STANDARD)  
  4W-5707 [7] 0.63 MM  
 

#SEBP17790022
 

7W-3813: SEAL GP-CRANKSHAFT

7W3813 SEAL GP-CRANKSHAFT
TYPE 2
c599499 SEBP1779
7W3813 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8433 L [1] SEAL GP-CRANKSHAFT  
    (CCW ROT)
2. 113-8432 J [1] SEAL GP-CRANKSHAFT  
    (CW ROT)
   
    L- INSTALL IN FLYWHEEL
    HSG ON STD ROTATION
    ENGINES & IN FRONT HSG
    ON REVERSE ROTATION
    ENGINES
   
    J - INSTALL IN FRONT HSG
    ON STD ROTATION ENGINES
    & IN FLYWHEEL HSG ON
    REVERSE ROTATION ENGINES
 

#SEBP17790023
 

7W-1255: CAMSHAFT GP

7W1255 CAMSHAFT GP-SINGLE
c413093 SEBP1779
7W1255 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-3218 [2] WASHER-THRUST  
2. 0L-1351 [4] BOLT  
3. 7C-0198 C [1] CAMSHAFT-REAR-LH  
4. 7N-3216 [2] SPACER-CAMSHAFT  
5. 7C-0194 C [1] CAMSHAFT AS-LH (FRONT)  
  4N-1650 [1] DOWEL  
6. 4W-6664 [2] PLATE AS-TIMING  
7. 7C-0196 C [1] CAMSHAFT-FRONT-RH  
8. 5P-0076 [16] BOLT-12 POINT HEAD  
9. 7C-0195 C [1] CAMSHAFT AS-RH (REAR)  
  4N-1650 [1] DOWEL  
10. 0S-0509 [2] BOLT  
  5M-2894 [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17790024
 

7C-8121: PISTON & ROD GP

7C8121 ROD & PISTON GP-12 REQUIRED
S/N 3YF1-503
7C6147-PAGE 16
c451147 SEBP1779
7C8121 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6147 Y [1] PISTON GP  
2. 7C-8610 [1] PIN-PISTON  
3. 8N-7296 [2] RETAINER-PIN  
4. 7C-8608 R [1] ROD AS-CONNECTING  
5. 7N-2043 [1] PIN-DOWEL  
6. 7N-2405 [4] BOLT-CONNECTING ROD  
7. 7C-8609 [1] BEARING-SLEEVE  
8. 1W-7538 [1] BEARING-CONNECTING ROD  
  4W-5709 A [1] BEARING-CONNECTING ROD  
    .63MM(.025IN)U.S.
  4W-5710 A [1] BEARING-CONNECTING ROD  
    1.27MM(.05IN)U.S.
  4W-5711 A [1] BEARING-CONNECTING ROD  
    .25MM(.01IN)U.S.
  4W-5712 A [1] BEARING-CONNECTING ROD  
    .63MM(.025IN)U.S.
    .25MM(.01IN)O.S.
  4W-5713 A [1] BEARING-CONNECTING ROD  
    1.27MM(.05IN)U.S.
    .25MM(.01IN)O.S.
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17790025
 

7E-1038: PISTON & ROD GP

7E1038 PISTON & ROD GP
S/N 3YF504-675
7E1037-PAGE 16
c546797 SEBP1779
7E1038 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1037 YR [1] PISTON GP  
2. 7C-8610 [1] PIN-PISTON  
3. 8N-7296 [2] RETAINER-PIN  
4. 7C-8608 R [1] ROD AS-CONNECTING  
5. 7N-2043 [1] PIN-DOWEL  
6. 7N-2405 [4] BOLT-CONNECTING ROD  
7. 7C-8609 [1] BEARING-SLEEVE  
8. 7E-7997 [1] BEARING-CONNECTING ROD  
  7E-7998 A [1] BEARING-CONNECTING ROD  
    .63MM(.025IN)U.S.
  7E-7999 A [1] BEARING-CONNECTING ROD  
    1.27MM(.05IN)U.S.
  7E-8000 A [1] BEARING-CONNECTING ROD  
    .25MM(.01IN)U.S.
  7E-8001 A [1] BEARING-CONNECTING ROD  
    .63MM(.025IN)U.S.
    .25MM(.01IN)O.S.
  7E-8002 A [1] BEARING-CONNECTING ROD  
    1.27MM(.05IN)U.S.
    .25MM(.01IN)O.S.
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17790026
 

6I-3017: PISTON & ROD GP

6I3017 PISTON & ROD GP
S/N 3YF676-UP
c546844 SEBP1779
6I3017 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-3281 [1] ROD AS-CONNECTING  
  7C-8609 [1] BEARING-SLEEVE  
  7N-2043 [1] PIN-DOWEL  
  7N-2405 [4] BOLT-CONNECTING ROD  
2. 6I-3018 [1] SKIRT-PISTON  
3. 6I-3019 [1] CROWN AS-PISTON  
4. 7C-8610 [1] PIN-PISTON  
5. 7E-7997 [1] BEARING-CONNECTING ROD  
  7E-7998 AJ [1] BEARING-CONNECTING ROD  
    .63MM(.025IN)US
  7E-7999 AJ [1] BEARING-CONNECTING ROD  
    1.27MM(.05IN)US
  7E-8000 AJ [1] BEARING-CONNECTING ROD  
    .25MM(.01IN)OS
  7E-8001 AJ [1] BEARING-CONNECTING ROD  
    .63MM(0.25IN)US
  7E-8002 AJ [1] BEARING-CONNECTING ROD  
    1.27MM(.05IN)US
6. 8N-7296 [2] RETAINER-PIN  
7. 8N-1233 [1] RING-PISTON (PISTON TOP)  
8. 8N-7810 [1] RING-PISTON (INTERMEDIATE)  
9. 7W-2221 [1] RING (OIL)  
   
    (J-INCLUDES A COMLETE
    SET OF BEARINGS
    FOR ONE PISTON)
  A   NOT PART OF THIS GROUP
 

#SEBP17790027
 

7E-1037: PISTON GP

7E1037 PISTON GP*R
S/N 3YF504-675
PART OF 7E1038 PISTON
c502374 SEBP1779
7E1037 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-7027 [1] CROWN AS-PISTON  
2. Z [2] BEARING-SLEEVE  
3. 8N-1233 [1] RING-PISTON (TOP)  
4. 8N-1234 [1] RING (INTERMEDIATE)  
5. 7W-2221 [1] RING (OIL)  
6. 4P-1658 [1] SKIRT-PISTON  
  Z   NOT SERVICED SEPARATELY
 

#SEBP17790028
 

7C-6147: PISTON GP

7C6147 PISTON GP-BASIC
S/N 3YF1-503
PART OF 7C8121 ROD & PISTON
c456003 SEBP1779
7C6147 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6146 [1] CROWN AS-PISTON  
2. 7C-6211 C [2] BEARING-SLEEVE  
3. 8N-1233 [1] RING-PISTON (TOP)  
4. 8N-1234 [1] RING (INTERMEDIATE)  
5. 7W-2221 [1] RING (OIL)  
6. 7C-6145 [1] SKIRT-PISTON  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17790029
 

7C-8120: CYLINDER HEAD GP

7C8120 CYLINDER HEAD GP
7C8130-PAGE 18
c563841 SEBP1779
7C8120 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1961 [8] BOLT  
2. 5P-8248 [8] WASHER-HARD  
3. 9Y-0635 [2] SPACER  
4. 7C-8130 YR [1] CYLINDER HEAD GP  
5. 0L-2070 [2] BOLT  
6. 5M-2894 [2] WASHER  
7. 101-1188 [1] GASKET-HEAD  
8. 6I-1357 C [4] SEAL-WATER  
9. 6I-1356 C [4] SEAL-WATER  
10. 5B-7890 [1] PLUG-PIPE  
11. 8T-6759 [1] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
New Tools Available For Installation Of Crankshaft Seals And Wear Sleeves
1980/10/22
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
New Crankshaft Thrust Plate Made Of Brass
1989/05/01
New Crankshaft Counterweight Bolt And Washer Used
1989/11/01
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/03/01
New Cylinder Blocks And Crankshafts Used
1991/04/01
New Crankshafts With Induction Hardened Fillets
1993/07/01
Service Life of Crankshaft Gears Can Be Extended
1993/07/01
Improved Crankshaft Seal Groups Used
1993/10/01
Remanufactured Crankshaft Interchangeability; Remanufactured "Upgrade To New" (UTN) Availability {1202}
1994/10/01
Numbering The Crankshaft To Match Counterweights{1202,1231}
1995/10/01
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2000/12/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2001/03/01
Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
2001/08/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2009/02/23
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/08/14
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3500 Industrial and Generator Set Engines
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Inspection of Crankshaft Main Bearings{1203}
Inspection of Crankshaft Main Bearings{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Crankshaft Wear Sleeves and Seals
3500 Generator Set Engines
Connecting Rod and Main Bearing Journals
3500 Generator Set Engines
Crankshaft
3500 Generator Set Engines
Service Letter-China
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Service Letter-Asia
Systems Operation
Crankshaft
3500 Generator Set Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Product Support Program For Installing New Bolts And Washers For The Crankshaft Counterweights On Certain D11N Tractors; 776B Tractors; 777B, 785, And 789 Trucks; And 3508, 3512, And 3516 Engines
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500 Generator Set Engines
Main Bearings
3500 Generator Set Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500 Generator Set Engines
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3500 GENERATOR SET ENGINES
Crankshaft Rear Seal And Wear Sleeve
3500 GENERATOR SET ENGINES
Crankshaft Main Bearings
3500 GENERATOR SET ENGINES
Crankshaft
3500 GENERATOR SET ENGINES
Service Magazine
6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Alternator Drive Pulley Has Hardened Wear Sleeve; New Seal Used On Pulley{1425,1357}
1988/12/12
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Cylinder Blocks, Main Bearing Caps, And Main Bearing Cap Bolts Used{1201}
1989/04/03
New Crankshaft Thrust Plate Made Of Brass {1232}
1989/05/08
New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23
Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06
Correct Torque Required For Bolts In Rear Gear Groups; Specification Omitted From Some Service Manuals{1204,1237,7568}
1990/04/02
Crankshaft Wear Sleeve Has Smaller Inside Diameter{1160,1161}
1991/02/25
Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
1991/05/13
New Piston Crown And Piston Skirt Used In Basic Piston Group; New Cooling Jet Used In Cylinder Block Group{1214,1331}
1991/09/30
Service Life of Crankshaft Gears Can Be Extended{1204}
1993/07/26
New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04
Numbering The Crankshaft To Match Counterweights {1202,1231}
1995/10/02
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/01/28
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}

Caterpillar Parts SIS Catalog 3512 :

CRANKSHAFT GP
8N-7103 CRANKSHAFT GP
COVER GP-CYLINDER BLOCK
8N-9640 COVER GP-CYLINDER BLOCK
KIT-INSERT
7E-2865 KIT-INSERT
CYLINDER BLOCK AS
7C-6956 CYLINDER BLOCK AS
CYLINDER BLOCK AS
9Y-9598 CYLINDER BLOCK AS
CYLINDER BLOCK GP
7C-6957 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-6957 CYLINDER BLOCK GP
CYLINDER BLOCK AS
9Y-9328 CYLINDER BLOCK AS
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
CAMSHAFT GP
7W-1255 CAMSHAFT GP
PISTON & ROD GP
7C-8121 PISTON & ROD GP
PISTON & ROD GP
7E-1038 PISTON & ROD GP
PISTON & ROD GP
6I-3017 PISTON & ROD GP
PISTON GP
7E-1037 PISTON GP
PISTON GP
7C-6147 PISTON GP

Truck sale:

Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
230,416 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
 
238,453 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512, mobile generator sets, Construction
178,974 
Caterpillar 3512, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.