AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G3353 CUTTING EDGE & BIT GP BULLDOZER S/N 96X1-UP PART OF 3G3429 BLADE-ANGLING AN ATTACHMENT D3C TRACK-TYPE TRACTOR


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
LINK GP
WORK TOOLS
BLADE GP
WINCH GP
IMPLEMENTS
CLUTCH & GEAR GP
WORK TOOLS
WINCH GP
IMPLEMENTS
LINES GP

TRACK-TYPE TRACTOR D3C TRACK-TYPE TRACTOR 8BF
 D3C LGP TRACTOR / DIRECT DRIVE / 8BF00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1782 D3C 8BF   (1988)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
BIT & CUTTING EDGE GP
3G-3353 BIT & CUTTING EDGE GP
BIT & CUTTING EDGE GP
8J-7147 BIT & CUTTING EDGE GP
 

#SEBP17820260
 

3G-3353: BIT & CUTTING EDGE GP

3G3353 CUTTING EDGE & BIT GP
BULLDOZER S/N 96X1-UP
PART OF 3G3429 BLADE-ANGLING
AN ATTACHMENT
c555979 SEBP1782
3G3353 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6229 [2] BIT-END  
2. 4T-6232 [2] EDGE-CUTTING  
3. 3F-5108 [22] BOLT-PLOW  
  4K-0367 [22] NUT  
  5P-8247 [22] WASHER-HARD  
 

#SEBP17820261
 

8J-7147: BIT & CUTTING EDGE GP

8J7147 CUTTING EDGE & BIT GP
BULLDOZER S/N 31M1-UP
PART OF 8J7126 BLADE-STRAIGHT
AN ATTACHMENT
c495734 SEBP1782
8J7147 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6229 [2] BIT-END  
2. 4T-6231 [2] EDGE-CUTTING  
3. 3F-5108 C [20] BOLT-PLOW  
  4K-0367 [20] NUT  
  4D-3704 C [20] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17820262
 

9J-2833: LINK AS

9J2833 LINK AS
BULLDOZER S/N 31M1-UP
PART OF 1U4372 LIFT-BLADE
AN ATTACHMENT
c149330 SEBP1782
9J2833 LINK AS Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-0298 [2] BEARING  
2. 3Y-2768 C [4] RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP17820263
 

1U-4372: LIFT GP-BLADE

1U4372 LIFT GP-BLADE
BULLDOZER S/N 31M1-UP
9J2833-PAGE 158
PART OF 6Y2821 BULLDOZER AR-STRAIGHT. AN ATTACHMENT
c401625 SEBP1782
1U4372 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [6] BOLT  
2. 8J-7212 [1] LEVER AS-RH  
  8J-7213 [1] LEVER AS-LH  
3. 8J-0729 [4] RETAINER  
4. 8J-0927 [4] PIN  
5. 8J-3349 [4] SPACER  
6. 9J-2833 Y [2] LINK AS  
7. 9W-3120 C [2] PIN AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17820264
 

7G-9423: MOUNTING GP-WINCH

7G9423 MOUNTING GP-WINCH
PART OF 6Y2219, 6Y5349 WINCH ARS
AN ATTACHMENT
c304139 SEBP1782
7G9423 MOUNTING GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-3390 [4] STUD-TAPERLOCK  
2. 5D-3118 [2] STUD-TAPERLOCK  
3. 1B-4333 [6] NUT  
4. 5P-8250 [6] WASHER  
 

#SEBP17820265
 

6Y-1907: CLUTCH & GEAR GP

6Y1907 GEAR & CLUTCH GP-PART 1 OF 2
WINCH S/N 9GA1-UP
PART OF 6Y2056 WINCH AR-TOWING
AN ATTACHMENT
c539491 SEBP1782
6Y1907 CLUTCH & GEAR GP Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-9939 [1] CAGE  
2. 1A-2029 [12] BOLT  
3. 5H-6734 [1] SEAL-O-RING  
4. 2J-6362 [1] BEARING-RACE & ROLLER  
5. 7T-9997 [1] SHIM-PACK (11 SHIMS)  
6. 7T-9938 [1] SHAFT  
7. 1B-8709 [1] KEY-WOODRUFF  
8. 0S-1614 [4] BOLT  
9. 5K-8591 [1] BEARING-OUTER  
10. 8E-1051 [1] CAGE  
11. 0L-1351 [12] BOLT  
12. 9M-7539 [1] SEAL  
13. 7T-9996 [2] RETAINER  
14. 6Y-0755 [5] SPRING (OUTER)  
15. 6V-2200 [2] CUP-ROLLER BEARING  
16. 003-7501 [2] CONE-BEARING  
17. 9W-0077 [1] GEAR (29 TEETH)  
18. 8F-8733 [1] SEAL-O-RING  
19. 6Y-2689 [1] COUPLER  
20. 9W-0075 [1] GEAR (10 TEETH)  
21. 8S-9092 [1] BOLT  
22. 8E-1050 [1] PLATE  
23. 9W-4193 B [1] SHIM-PACK (9 SHIMS)  
24. 7T-9940 [1] CAGE  
25. 7T-9943 [1] SPACER  
26. 7T-9945 [1] GEAR (10 TEETH)  
27. 7T-9944 [1] SPACER  
28. 7T-9998 [1] SHIM-PACK (11 SHIMS)  
29. 6V-0958 [1] BALL BEARING  
30. 5S-0969 [1] CARRIER-RING  
31. 2K-5957 [1] RING-SEALING  
32. 7G-9467 [1] CAGE  
33. 0T-0573 [2] BOLT  
34. 2J-6361 [1] RACE-BEARING  
35. 3B-3969 [1] RACE-BEARING-INNER  
36. 0S-1594 [12] BOLT  
37. 7G-6540 [1] CAGE-BEARING  
38. 7G-6235 B [1] SHIM PACK (6 SHIMS)  
39. 8H-7521 [1] SEAL-O-RING  
40. 3L-1425 [1] BALL BEARING  
41. 7T-5185 [1] GEAR (51 TEETH)  
42. 7G-6267 [1] SPACER  
43. 2D-6420 [1] RACE-ROLLER BEARING  
44. 7M-1154 [1] BEARING  
45. 1H-8142 [1] RING-RETAINING  
46. 8E-1441 [1] PINION-BEVEL (13 TEETH)  
47. 7G-6227 [1] CAGE  
48. 7M-9909 [1] SEAL-O-RING  
49. 3J-0634 [1] SEAL-O-RING  
50. 9H-2258 [1] SEAL-LIP TYPE  
51. 7F-2742 [1] BALL BEARING  
52. 7G-6229 [1] COUPLING  
53. 3S-6875 [1] RING-RETAINING  
54. 7G-6226 [1] SPACER  
55. 7T-5186 [1] GEAR (24 TEETH)  
56. 8H-9789 [1] BALL BEARING  
57. 7G-4975 [1] HUB  
58. 8E-6904 [1] RETAINER  
59. 009-1133 B [4] SHIM  
60. 2K-5965 [3] RING-RETAINING  
61. 7G-4976 [1] PLATE  
62. 6Y-7934 [3] DISC-FRICTION  
63. 9P-6903 [3] PLATE  
64. 7G-4973 [1] PISTON  
65. 2H-6184 [1] SEAL-O-RING  
66. 5F-3106 [1] SEAL-O-RING  
67. 8E-1071 [1] HOUSING  
68. 8E-6903 [1] MANIFOLD  
69. 1S-9799 [2] SEAL-O-RING  
70. 7G-6233 [1] SHAFT AS  
71. 7G-6248 B [1] SHIM PACK (9 SHIMS)  
72. 6Y-0756 [5] SPRING (INNER)  
  B   USE AS REQUIRED
 

#SEBP17820266
 

6Y-1907: CLUTCH & GEAR GP

6Y1907 GEAR & CLUTCH GP-PART 2 OF 2
WINCH S/N 9GA1-UP
PART OF 6Y2056 WINCH AR-TOWING
AN ATTACHMENT
c539493 SEBP1782
6Y1907 CLUTCH & GEAR GP Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1250 [2] NUT  
2. 9K-2129 [2] SPACER  
3. 1A-2029 [10] BOLT (3/8-16X1.125IN)  
4. 8E-2915 [1] SUPPORT  
5. 7G-6228 B [1] SHIM PACK (5 SHIMS)  
6. 7G-6317 B [1] SHIM PACK (5 SHIMS)  
7. 4H-6520 [1] SEAL-O-RING  
8. 4F-7952 [4] SEAL-O-RING  
9. 8E-8281 [1] SHAFT AS  
10. 1D-4615 [8] BOLT  
11. 7G-5419 [1] RING  
12. 5P-7606 [2] CUP-ROLLER BEARING  
13. 5P-7605 [2] CONE-ROLLER BEARING  
14. 8E-1046 [1] GEAR (31 TEETH)  
15. 2V-9404 [1] RING-RETAINING  
16. 7G-6320 [1] RING  
17. 9X-4620 [1] SEAL-LIP TYPE  
18. 3T-9193 [1] SPACER  
19. 6Y-1904 [1] DRUM AS  
20. 035-8128 [1] PIN-DIFF MOUNTING  
21. 4D-8648 [2] CUP-ROLLER BRG  
22. 064-9056 [2] CONE-BEARING  
23. 8E-1047 [1] SLEEVE  
24. 6V-4427 [1] SEAL-LIP TYPE  
25. 8E-1052 [1] RETAINER  
26. 0L-1351 [4] BOLT  
27. 006-7640 [1] SEAL  
28. 3B-5302 [1] COTTER  
29. 7G-7489 [1] PLUG  
30. 4D-7637 [1] SPRING  
31. 7G-8071 [1] BAR AS  
32. 8E-1440 [1] GEAR-BEVEL (27 TEETH)  
33. 8E-1054 [1] SHAFT  
34. 0S-1595 [10] BOLT  
35. 6B-0132 [1] BEARING-INNER  
36. 7G-6250 [1] SUPPORT  
37. 0S-1594 [12] BOLT  
38. 6P-7968 [4] PLATE-CLUTCH  
39. 3T-9960 [4] DISC-FRICTION  
40. 7G-6260 [1] HUB  
41. 8F-5900 [1] SEAL-O-RING  
42. 7G-6259 [1] PLATE  
43. 0L-1732 [1] BOLT  
44. 7G-6251 [1] HUB  
45. 5H-6005 [2] SEAL-O-RING  
46. 9F-1399 [1] SEAL-O-RING  
47. 7G-6252 [1] CARRIER  
48. 9M-9545 [2] SEAL-O-RING  
49. 7G-6255 [1] PISTON  
50. 1J-2176 [1] SEAL-O-RING  
51. 3P-5024 [2] SPRING-DISC  
52. 7G-6232 [1] CAGE AS  
  4B-9783 [1] BALL  
53. 6N-7266 [2] SHAFT-PUMP IDLER  
54. 3B-1915 [6] BOLT (3/8-16X1.375IN)  
55. 5M-6213 [1] PLUG  
56. 6B-0133 [1] RACE-BEARING  
57. 6T-8307 [1] WEDGE  
58. 0L-1352 [2] BOLT  
59. 8E-0625 [1] COVER  
60. 7G-6713 [1] SPRING-MAIN  
61. 9W-1503 [1] SPRING  
62. 3D-2898 [1] SEAL-O-RING  
63. 4F-7391 [1] SEAL-O-RING  
64. 9W-0035 [1] SHAFT  
65. 3T-7340 [1] HOUSING AS  
  2D-6642 [1] BALL  
66. 6V-5759 [1] SEAL-O-RING  
67. 4F-9029 [1] SEAL  
68. 2J-0157 [1] SEAL-O-RING  
69. 8E-2993 [1] FORK  
70. 9W-4192 [1] PIN  
71. 6K-8162 [1] RING-RETAINING  
72. 9C-4555 [1] SPRING  
73. 8E-3561 [1] SPACER  
  B   USE AS REQUIRED
 

#SEBP17820267
 

6Y-1467: CASE & COVERS GP-WINCH

6Y1467 CASE & COVERS GP
WINCH S/N 9GA1-UP
PART OF 6Y2056 WINCH AR-TOWING
AN ATTACHMENT
c495419 SEBP1782
6Y1467 CASE & COVERS GP-WINCH Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [31] BOLT  
2. 6Y-1459 [1] COVER  
3. 6Y-1441 [1] GASKET  
4. 7G-7510 [1] GASKET  
5. 7G-7509 [1] COVER  
6. 7G-7511 [1] COVER  
7. 7G-7512 [1] GASKET  
8. 6Y-1466 [1] CASE AS  
  5H-9513 [1] BUSHING  
9. 3F-8345 [1] PIN-CABLE SOCKET  
10. 8S-7169 [1] COUPLING  
11. 2D-8390 [1] PLUG-MAGNETIC  
12. 6F-4868 [1] GASKET  
13. 7G-8303 [1] SHAFT  
14. 7M-8485 [1] SEAL-O-RING  
15. 9Y-9236 [1] BODY AS-GAUGE  
16. 3B-4639 [3] COTTER  
17. 3B-6773 [1] ELBOW  
18. 9G-5127 [1] BREATHER  
19. 0S-1594 [2] BOLT  
20. 7G-8307 [1] FLANGE  
21. 7D-8048 [1] SEAL-O-RING  
22. 9P-0217 [1] SCREEN AS  
23. 1V-2750 [1] NIPPLE-PIPE  
 

#SEBP17820268
 

5G-3774: PUMP & LINES GP

5G3774 PUMP & LINES GP
TYPE 1- 1U0414-PAGE 166
PART OF 6Y2219 WINCH AR
AN ATTACHMENT
c469403 SEBP1782
5G3774 PUMP & LINES GP Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0414 Y [1] PUMP GP-GEAR  
2. 5G-4336 [1] TUBE AS  
3. 4J-0522 [1] SEAL  
4. 5G-4333 [1] TUBE AS  
5. 5G-4337 [1] GAUGE AS-OIL LEVEL  
6. 7H-7055 [1] CLIP  
7. 030-7951 [2] ELBOW-FLARED  
8. 7M-8485 [3] SEAL-O-RING  
9. 5G-3754 [1] TUBE AS  
10. 5G-4335 [1] TUBE AS  
11. 030-7948 [1] ELBOW  
12. 3K-0360 [1] SEAL-O-RING  
13. 5G-4334 [1] TUBE AS  
14. 5G-4622 [1] HOSE AS  
15. 2P-1411 [1] STEM AS-COLLET  
16. 3S-7252 [2] SLEEVE  
17. 8S-9355 G HOSE (50.79IN)  
18. 2P-1409 [1] STEM AS  
19. 5G-3758 [1] PLATE AS  
20. 5G-3757 [1] HOSE AS  
21. 5G-4332 [1] HOSE AS  
22. 9S-9725 [1] COUPLING AS  
23. 9S-0671 E HOSE 125CM(49.2IN)  
24. 3S-8606 [2] SLEEVE  
25. 8S-4055 [1] COUPLING AS  
26. 7S-8920 [1] CLIP (SLOT)  
27. 7S-8921 [1] CLIP (TAB)  
28. 1A-5822 [1] BOLT  
29. 2J-1020 [1] SPACER  
30. 5G-4315 [1] PLATE  
31. 9M-4584 [1] CONNECTOR-FLARED  
32. 2M-9780 [1] SEAL-O-RING  
33. 7D-5318 [1] CONNECTOR-FLARED  
34. 0S-1571 [2] BOLT  
35. 7F-2050 [1] LOCKNUT  
36. 2P-1286 [1] LOCKNUT-BULKHEAD  
37. 0T-0319 [4] BOLT  
38. 4S-9191 [4] WASHER  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#SEBP17820269
 

5G-3774: PUMP & LINES GP

5G3774 PUMP & LINES GP
TYPE 2- 1U0414-PAGE 166
PART OF 6Y2219 WINCH AR.
AN ATTACHMENT
c519331 SEBP1782
5G3774 PUMP & LINES GP Parts scheme
  For full view, you need register

Parts for your D3C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0414 Y [1] PUMP GP-GEAR  
2. 5G-4336 [1] TUBE AS  
3. 4J-0522 [1] SEAL  
4. 5G-4315 [1] PLATE  
5. 9M-4584 [1] CONNECTOR-FLARED  
6. 2M-9780 [1] SEAL-O-RING  
7. 2J-1020 [1] SPACER  
8. 7M-8485 C [2] SEAL-O-RING  
9. 5G-3754 [1] TUBE AS  
10. 7D-5318 [1] CONNECTOR-FLARED  
11. 030-7948 [1] ELBOW  
12. 3K-0360 [1] SEAL-O-RING  
13. 5G-4334 [1] TUBE AS  
14. 5S-7383 C [2] BOLT  
15. 7F-2050 [1] LOCKNUT  
16. 2P-1286 [1] LOCKNUT-BULKHEAD  
17. 7X-0310 C [4] BOLT  
18. 7X-0507 C [4] WASHER-HARD  
19. 5G-3758 [1] PLATE AS  
20. 5G-3757 [1] HOSE AS  
21. 5G-4332 I [1] HOSE AS  
22. 7S-8920 [1] CLIP (SLOT)  
23. 7S-8921 [1] CLIP (TAB)  
24. 8T-9389 C [1] BOLT  
25. 030-7951 [1] ELBOW-FLARED  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D3C :

BLADE GP-ANGLING
3G-3429 BLADE GP-ANGLING
BLADE GP-ANGLING
3G-3429 BLADE GP-ANGLING
BLADE GP-ANGLING
3G-3429 BLADE GP-ANGLING
BLADE GP-STRAIGHT
8J-7126 BLADE GP-STRAIGHT
PUSH ARM GP
8J-7124 PUSH ARM GP
MOUNTING GP-TRUNNION
5G-0269 MOUNTING GP-TRUNNION
TRUNNION GP
8J-7127 TRUNNION GP
MOUNTING GP-TRUNNION
6S-7351 MOUNTING GP-TRUNNION
BIT & CUTTING EDGE GP
8J-7147 BIT & CUTTING EDGE GP
LINK AS
9J-2833 LINK AS
LIFT GP-BLADE
1U-4372 LIFT GP-BLADE
MOUNTING GP-WINCH
7G-9423 MOUNTING GP-WINCH
CLUTCH & GEAR GP
6Y-1907 CLUTCH & GEAR GP
6Y-1907 CLUTCH & GEAR GP
CASE & COVERS GP-WINCH
6Y-1467 CASE & COVERS GP-WINCH
PUMP & LINES GP
5G-3774 PUMP & LINES GP

Truck sale:

Caterpillar D3C
 
Caterpillar D3C
- Crawler dozers
MICHIGAN CAT
 
69,600 
Caterpillar 249D3 C3H2, Skid Steer Loaders, Construction
- Skid Steer Loaders
WHEELER MACHINERY CO.
 
70,400 
Caterpillar 239D3 C1H2, Skid Steer Loaders, Construction
- Skid Steer Loaders
WHEELER MACHINERY CO.
 
70,400 
Caterpillar 239D3 C1H2, Skid Steer Loaders, Construction
- Skid Steer Loaders
WHEELER MACHINERY CO.
 
71,500 
Caterpillar 249D3 C3H2, Skid Steer Loaders, Construction
- Skid Steer Loaders
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.