AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-7620 COVER GP-VALVE MECHANISM Type 2 AN ATTACHMENT 3116 INDUSTRIAL ENGINE


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

INDUSTRIAL ENGINE 3116 INDUSTRIAL ENGINE 4PG
 3116 Industrial Engine 4PG00001-UP SEBP1789 3116 4PG   (1988)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
7E-9915 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
107-7722 ROCKER ARM GP
 

#SEBP17890050
 

9Y-7620: COVER GP-VALVE MECHANISM

9Y-7620 COVER GP-VALVE MECHANISM
Type 2
AN ATTACHMENT
i02677401 SEBP1789
9Y7620 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2940 [1] GASKET (VALVE COVER)  
2. 6V-2315 M [14] BOLT (M6X1X35-MM)  
3. 119-2961 C [1] COVER  
4. 5P-0537 [14] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 2W-6225 C [1] CAP AS-OIL FILLER (ENGINE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP17890051
 

4W-2197: CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
S/N 4PG1-4314
i00187488 SEBP1789
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-1725 [1] CRANKSHAFT AS  
2. 1B-8705 [1] KEY-WOODRUFF  
3. 2W-8147 [1] GEAR (50-TEETH)(50 TEETH)  
4. 107-7602 [1] BEARING-THRUST  
  7C-6969 AB [1] BEARING-THRUST (0.5-MM OS)  
  7C-6970 AB [1] BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
  7C-6966 AB [1] BEARING-THRUST (0.25-MM US)  
  7C-6967 AB [1] BEARING-THRUST (0.5-MM US)  
  AB [1] BEARING-THRUST (0.75-MM US)  
5. 101-1530 [3] BEARING-MAIN  
  7C-6974 AB [1] BEARING-MAIN (0.5-MM OS)  
  7C-6975 AB [1] BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6971 AB [1] BEARING-MAIN (0.25-MM US)  
  7C-6972 AB [1] BEARING-MAIN (0.5-MM US)  
  AB [1] BEARING-MAIN (0.75-MM US)  
6. 107-7708 [3] BEARING-MAIN  
  7C-6964 AB [1] BEARING-MAIN (0.5-MM OS)  
  7C-6965 AB [1] BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  7C-6961 AB [1] BEARING-MAIN (0.25-MM US)  
  7C-6962 AB [1] BEARING-MAIN (0.5-MM US)  
  AB [1] BEARING-MAIN (0.75-MM US)  
  7C-7980 AF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS USED ONLY TO SALVAGE THE REAR SEAL SURFACE OF THE CRANKSHAFT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890052
 

4W-2197: CRANKSHAFT GP

4W-2197 CRANKSHAFT GP
S/N 4PG4315-UP
i00886730 SEBP1789
4W2197 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 489-2731 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 [1] BEARING-THRUST  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 [6] BEARING-MAIN  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890053
 

100-4948: CYLINDER BLOCK GP

100-4948 CYLINDER BLOCK GP
S/N 4PG2651-UP
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
i00188153 SEBP1789
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17890054
 

101-4491: CYLINDER BLOCK GP

101-4491 CYLINDER BLOCK GP
S/N 4PG991-1129
PART OF 101-4492 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 7C-5826@@@@@
i00463445 SEBP1789
1014491 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 [1] SEAL-O-RING  
9. 9S-8008 [1] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
16. 9S-8008 B [1] PLUG (1-1/16-12-THD)  
17. 3D-2824 B [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17890055
 

101-4492: CYLINDER BLOCK GP

101-4492 CYLINDER BLOCK GP
S/N 4PG991-1129
i00463466 SEBP1789
1014492 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-4491 Y [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890056
 

129-1095: CYLINDER BLOCK GP

129-1095 CYLINDER BLOCK GP
S/N 4PG3184-4314
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
i00188577 SEBP1789
1291095 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17890057
 

149-5403: CYLINDER BLOCK GP

149-5403 CYLINDER BLOCK GP
S/N 4PG4315-UP
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
i00907543 SEBP1789
1495403 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5402 [1] CYLINDER BLOCK AS  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
5. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
7. 2M-6471 [2] PLUG-CUP  
8. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
9. 3D-2824 B [2] SEAL-O-RING  
10. 3H-5552 [1] PLUG-CUP  
11. 9S-8006 [1] PLUG (7/8-14-THD)  
12. 2M-9780 [1] SEAL-O-RING  
13. 216-5586 [1] BUSHING (CAMSHAFT)  
14. 2W-7213 [6] BUSHING (CAMSHAFT)  
15. 3K-0360 [1] SEAL-O-RING  
16. 9S-8005 [1] PLUG (3/4-16-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17890058
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 4PG1-2650
i00190226 SEBP1789
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [4] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890059
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 4PG2651-3183
i00190225 SEBP1789
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves
1989/05/01
New Fuel Setting Screw Cover And Bolt
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/10/01
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups{1209}
1998/05/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Industrial and Generator Set Engines
Fuel Injection Timing - Check
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Unit Injector Mechanism
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Valve Rocker Arms and Lifters
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Valve Mechanism Cover
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Service Letter-China
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Engine Valve Lash - Inspect/Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Excessive Valve Lash
3114, 3116 and 3126 Engines
Little or No Valve Lash
3114, 3116 and 3126 Engines
Valve Train Noise
3114, 3116 and 3126 Engines
Disassembly and Assembly
Rocker Shaft and Pushrod - Remove
3114, 3116 and 3126 Engines
Rocker Shaft and Pushrod - Install
3114, 3116 and 3126 Engines
Valve Mechanism Cover - Remove and Install
3114, 3116 and 3126 Engines
Rocker Shaft - Disassemble
3114, 3116 and 3126 Engines
Rocker Shaft - Assemble
3114, 3116 and 3126 Engines
Lifter Group - Remove and Install
3114, 3116 and 3126 Engines
Service Magazine
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
New Valve Cover Gasket Used {1107}
1994/01/17
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17

Caterpillar Parts SIS Catalog 3116 :

COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7E-9915 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-4491 CYLINDER BLOCK GP
CYLINDER BLOCK GP
101-4492 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.