AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-5227 CARTRIDGE GP-TURBOCHARGER S/N 4PG570-UP PART OF 9Y-6487, 9Y-6749 TURBOCHARGER GP ALSO AN ATTACHMENT 3116


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
INLET GP-AIR
MANIFOLD GP-INLET
LINES GP-EXHAUST

INDUSTRIAL ENGINE 3116 INDUSTRIAL ENGINE 4PG
 3116 Industrial Engine 4PG00001-UP SEBP1789 3116 4PG   (1988)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
6I-2278 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
7C-5624 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9Y-5227 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9Y-8692 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
100-5867 TURBOCHARGER GP
TURBOCHARGER GP
100-5868 TURBOCHARGER GP
 

#SEBP17890420
 

9Y-5227: CARTRIDGE GP-TURBOCHARGER

9Y-5227 CARTRIDGE GP-TURBOCHARGER
S/N 4PG570-UP
PART OF 9Y-6487, 9Y-6749 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00443541 SEBP1789
9Y5227 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY)
 

#SEBP17890421
 

9Y-8692: CARTRIDGE GP-TURBOCHARGER

9Y-8692 CARTRIDGE GP-TURBOCHARGER
PART OF 9Y-6481, 9Y-6750 TURBOCHARGER GP
AN ATTACHMENT
i00433268 SEBP1789
9Y8692 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5801 [1] NUT (M7X1-THD)  
2. 9Y-8693 [1] WHEEL-COMPRESSOR  
3. 7C-5800 [1] INSERT  
4. 7C-6658 [1] RING-RETAINING  
5. 7C-5828 [1] SEAL-O-RING  
6. 7C-5858 [1] BEARING-THRUST  
7. 7C-5825 [1] SLEEVE-FLINGER  
8. 7C-5856 [1] PLATE-BACKING  
9. 1N-3806 [1] RING-PISTON  
10. 7C-5627 [1] WHEEL & SHAFT AS  
11. 7C-5798 [2] BEARING  
12. 7C-6657 [4] RING-RETAINING  
13. 7C-6656 [1] WASHER  
14. 7C-5827 [1] RING-THRUST  
15. 7C-6154 [1] SLEEVE-SPACER  
16. 7C-5859 [1] RING-PISTON  
17. 9Y-8698 [1] HOUSING AS  
18. 7C-6654 [1] PIN-SPRING  
 

#SEBP17890422
 

1W-2431: CLAMP-BAND

1W-2431 CLAMP-BAND
STAINLESS STL, 119.1 MM GAGE DIAMETER
AN ATTACHMENT
i01140693 SEBP1789
1W2431 CLAMP-BAND Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0193 [1] NUT-FULL (5/16-24-THD)  
 

#SEBP17890423
 

1N-4877: COVER GP-INLET MANIFOLD

1N-4877 COVER GP-INLET MANIFOLD
i00187268 SEBP1789
1N4877 COVER GP-INLET MANIFOLD Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1722 [1] COVER  
2. 6V-5219 BM [20] BOLT (M8X1.25X40-MM)(LOCATION X)  
3. 9M-1974 B [20] WASHER-HARD (8.8X16X2-MM THK)(LOCATION X)  
4. 7C-1152 [1] GASKET  
5. 9Y-6725 [2] PLATE  
6. 9Y-7060 [2] PLATE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17890424
 

110-0358: ELBOW GP-EXHAUST

110-0358 ELBOW GP-EXHAUST
AN ATTACHMENT
i00493954 SEBP1789
1100358 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-0356 [1] TUBE  
2. 7L-8255 [1] CLAMP-TUBE  
3. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 1W-2431 [1] CLAMP-BAND  
7. 7E-2994 [1] SUPPORT  
8. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
9. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
10. 109-6311 [1] SUPPORT  
11. 7X-7729 [4] WASHER (11X25X3-MM THK)  
  M   METRIC PART
 

#SEBP17890425
 

9N-6330: ELBOW GP-EXHAUST

9N-6330 ELBOW GP-EXHAUST
AN ATTACHMENT
i00438949 SEBP1789
9N6330 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-6327 [1] ELBOW-EXHAUST  
2. 1W-2431 [1] CLAMP-BAND  
 

#SEBP17890426
 

9Y-2599: ELBOW GP-EXHAUST

9Y-2599 ELBOW GP-EXHAUST
S/N 4PG570-UP
FOR USE WITH APPLICATIONS REQUIRING A 90 DEGREE EXHAUST ELBOW FROM THE TURBOCHARGER
ALSO AN ATTACHMENT
i00440243 SEBP1789
9Y2599 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4625 [1] ELBOW-EXHAUST  
2. 7C-0752 [1] CLAMP  
 

#SEBP17890427
 

9Y-6700: ELBOW GP-EXHAUST

9Y-6700 ELBOW GP-EXHAUST
Type 1
FOR USE WITH FLEXIBLE COUPLING
AN ATTACHMENT
i00445446 SEBP1789
9Y6700 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6658 [1] TUBE  
2. 5L-7399 [1] CLAMP-TUBE  
3. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
4. 6V-4248 M [2] BOLT (M10X1.5X25-MM)  
5. 2Y-5829 M [2] NUT (M10X1.5-THD)  
6. 7C-0752 [1] CLAMP  
7. 7C-9701 [1] SUPPORT  
8. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
9. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP17890428
 

9Y-6700: ELBOW GP-EXHAUST

9Y-6700 ELBOW GP-EXHAUST
Type 2
FOR USE WITH FLEXIBLE COUPLING
AN ATTACHMENT
i00445444 SEBP1789
9Y6700 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6658 [1] TUBE  
2. 5L-7399 [1] CLAMP-TUBE  
3. 8T-4121 C [4] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4136 CM [4] BOLT (M10X1.5X25-MM)  
5. 8T-4133 CM [4] NUT (M10X1.5-THD)  
6. 7C-0752 [1] CLAMP  
7. 7E-2994 C [1] SUPPORT  
8. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
9. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
10. 7E-2993 C [1] SUPPORT  
11. 7X-7729 C [4] WASHER (11X25X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP17890429
 

9Y-6701: ELBOW GP-EXHAUST

9Y-6701 ELBOW GP-EXHAUST
Type 1
FOR USE WITH VERTICAL MUFFLER
AN ATTACHMENT
i00445464 SEBP1789
9Y6701 ELBOW GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6657 [1] TUBE  
2. 5L-7399 [1] CLAMP-TUBE  
3. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
5. 8T-4133 M [2] NUT (M10X1.5-THD)  
6. 7C-0752 [1] CLAMP  
7. 7C-9701 [1] SUPPORT  
8. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
9. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft{1053,1052}
1994/03/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect/Clean
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Turbocharger - Install
3114, 3116 and 3126 Engines
Turbocharger - Remove
3114, 3116 and 3126 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Dealer Installed Air Inlet Heater Starting Aid Available{1058}
1993/09/27
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3116 :

CARTRIDGE GP-TURBOCHARGER
7C-5624 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
6I-2278 CARTRIDGE GP-TURBOCHARGER
4P-4686 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
100-5995 CARTRIDGE GP-TURBOCHARGER
100-5994 CARTRIDGE GP-TURBOCHARGER
CAP-AIR CLEANER
3F-0539 CAP-AIR CLEANER
CAP GP-AIR CLEANER
5L-8091 CAP GP-AIR CLEANER
CAP AS-RAIN
7S-1784 CAP AS-RAIN
CARTRIDGE GP-TURBOCHARGER
9Y-8692 CARTRIDGE GP-TURBOCHARGER
CLAMP-BAND
1W-2431 CLAMP-BAND
COVER GP-INLET MANIFOLD
1N-4877 COVER GP-INLET MANIFOLD
ELBOW GP-EXHAUST
110-0358 ELBOW GP-EXHAUST
ELBOW GP-EXHAUST
9N-6330 ELBOW GP-EXHAUST
ELBOW GP-EXHAUST
9Y-2599 ELBOW GP-EXHAUST
ELBOW GP-EXHAUST
9Y-6700 ELBOW GP-EXHAUST
ELBOW GP-EXHAUST
9Y-6700 ELBOW GP-EXHAUST

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.