AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

101-4494 TURBOCHARGER GP S/N 4PG1321-UP 3116 INDUSTRIAL ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

INDUSTRIAL ENGINE 3116 INDUSTRIAL ENGINE 4PG
 3116 Industrial Engine 4PG00001-UP SEBP1789 3116 4PG   (1988)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
100-6597 TURBOCHARGER GP
TURBOCHARGER GP
101-4493 TURBOCHARGER GP
TURBOCHARGER GP
101-4494 TURBOCHARGER GP
TURBOCHARGER GP
102-8400 TURBOCHARGER GP
TURBOCHARGER GP
102-8403 TURBOCHARGER GP
TURBOCHARGER GP
102-8407 TURBOCHARGER GP
 

#SEBP17890460
 

101-4494: TURBOCHARGER GP

101-4494 TURBOCHARGER GP
S/N 4PG1321-UP
i00463469 SEBP1789
1014494 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-5998 Y [1] TURBOCHARGER GP  
2. 3E-8017 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-7431 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890461
 

102-8400: TURBOCHARGER GP

102-8400 TURBOCHARGER GP
S/N 4PG2243-UP
PART OF 101-4493 TURBOCHARGER GP
FIELD REPLACEMENT FOR @@@@@102-8403@@@@@
i00467064 SEBP1789
1028400 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6671 M [6] BOLT AS  
2. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 100-5873 [1] HOUSING  
7. 100-5994 Y [1] CARTRIDGE GP-TURBOCHARGER  
8. 100-6761 [1] HOUSING-COMPRESSOR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890462
 

102-8403: TURBOCHARGER GP

102-8403 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@102-8400@@@@@
AN ATTACHMENT
i00467166 SEBP1789
1028403 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6671 M [6] BOLT AS  
2. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
3. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 100-5994 Y [1] CARTRIDGE GP-TURBOCHARGER  
7. 100-6761 [1] HOUSING-COMPRESSOR  
8. 100-5873 [1] HOUSING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890463
 

102-8407: TURBOCHARGER GP

102-8407 TURBOCHARGER GP
FOR USE WITH EXHAUST TO REAR EXHAUST MANIFOLD, TURBOCHARGER OIL LINES & AIR LINES
FIELD REPLACEMENT ORDER @@@@@100-5998@@@@@
AN ATTACHMENT
i00467168 SEBP1789
1028407 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-5995 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 100-6762 [1] HOUSING-COMPRESSOR  
3. 100-5873 [1] HOUSING  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
7. 7C-6671 M [6] BOLT AS  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890464
 

102-8411: TURBOCHARGER GP

102-8411 TURBOCHARGER GP
S/N 4PG784-UP
PART OF 7C-6342 TURBOCHARGER GP
i00467172 SEBP1789
1028411 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-1732 [1] CARTRIDGE GP-TURBOCHARGER  
2. 105-5070 [1] HOUSING-COMPRESSOR  
3. 4P-5873 [1] HOUSING AS-TURBINE  
4. 7C-5802 [4] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [8] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890465
 

115-1182: TURBOCHARGER GP

115-1182 TURBOCHARGER GP
S/N 4PG1891-3047
PART OF 7C-6342 TURBOCHARGER GP
i00490147 SEBP1789
1151182 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8490 [1] CARTRIDGE GP-TURBOCHARGER  
2. 112-5566 [1] COVER  
3. 4P-5873 [1] HOUSING AS-TURBINE  
4. 7C-5802 [4] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [8] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890466
 

127-7077: TURBOCHARGER GP

127-7077 TURBOCHARGER GP
S/N 4PG3493-UP
PART OF 7C-6342 TURBOCHARGER GP
i00566066 SEBP1789
1277077 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-2243 [2] PLATE-CLAMP (TURBINE)  
2. 120-2244 M [4] BOLT (M8X1.25X14-MM)  
  1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
3. 121-7554 [1] SEAL-O-RING  
4. 121-9799 [3] PLATE-CLAMP (COMPRESSOR)  
5. 125-5466 [5] BOLT AS  
6. 127-7078 [1] CARTRIDGE GP-TURBOCHARGER  
7. 127-7079 [1] HOUSING AS-TURBINE  
8. 127-7080 [1] COVER-COMPRESSOR  
  M   METRIC PART
 

#SEBP17890467
 

130-5921: TURBOCHARGER GP

130-5921 TURBOCHARGER GP
S/N 4PG3048-3492
PART OF 7C-6342 TURBOCHARGER GP
i00502762 SEBP1789
1305921 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8490 [1] CARTRIDGE GP-TURBOCHARGER  
2. 130-5922 [1] COVER-COMPRESSOR  
3. 4P-5873 [1] HOUSING AS-TURBINE  
4. 7C-5802 [4] PLATE-CLAMP (COMPRESSOR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)  
6. 4N-8155 [1] PLATE-TURBOCHARGER INFORMATION  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [8] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890468
 

157-4386: TURBOCHARGER GP

157-4386 TURBOCHARGER GP
S/N 4PG3493-UP
PART OF 7C-6342 TURBOCHARGER GP
i01049150 SEBP1789
1574386 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-2243 [3] PLATE-CLAMP (TURBINE)  
2. 120-2244 M [6] BOLT (M8X1.25X14-MM)  
3. 121-9799 [3] PLATE-CLAMP (COMPRESSOR)  
4. 125-5466 [6] BOLT AS  
5. 135-2648 [1] HOUSING AS-TURBINE  
  4K-0149 [7] PLUG-CUP  
6. 158-4645 [1] CARTRIDGE GP-TURBOCHARGER  
  M   METRIC PART
 

#SEBP17890469
 

4P-2120: TURBOCHARGER GP

4P-2120 TURBOCHARGER GP
S/N 4PG787-2327
i00374435 SEBP1789
4P2120 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6746 Y [1] TURBOCHARGER GP  
2. 9X-6620 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-9793 [1] GASKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft{1053,1052}
1994/03/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect/Clean
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Turbocharger - Install
3114, 3116 and 3126 Engines
Turbocharger - Remove
3114, 3116 and 3126 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Dealer Installed Air Inlet Heater Starting Aid Available{1058}
1993/09/27
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3116 :

TURBOCHARGER GP
101-4493 TURBOCHARGER GP
TURBOCHARGER GP
100-6597 TURBOCHARGER GP
TURBOCHARGER GP
100-5998 TURBOCHARGER GP
TURBOCHARGER GP
100-5868 TURBOCHARGER GP
TURBOCHARGER GP
100-5867 TURBOCHARGER GP
PRECLEANER GP
4M-0310 PRECLEANER GP
PRECLEANER GP
121-7746 PRECLEANER GP
PIPE GP-EXHAUST
9Y-3427 PIPE GP-EXHAUST
TURBOCHARGER GP
102-8400 TURBOCHARGER GP
TURBOCHARGER GP
102-8403 TURBOCHARGER GP
TURBOCHARGER GP
102-8407 TURBOCHARGER GP
TURBOCHARGER GP
102-8411 TURBOCHARGER GP
TURBOCHARGER GP
115-1182 TURBOCHARGER GP
TURBOCHARGER GP
127-7077 TURBOCHARGER GP
TURBOCHARGER GP
130-5921 TURBOCHARGER GP
TURBOCHARGER GP
157-4386 TURBOCHARGER GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.