AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-6749 TURBOCHARGER GP S/N 4PG977-UP PART OF 9Y-8997 TURBOCHARGER GP FIELD REPLACEMENT ORDER @@@@@ 9Y-0132@@@@@ FOR USE WITH 7C9446 LINES-AIR, 1W6030 LINES-TURBOCHARGER OIL, 7W9248 MANIFOLD-EXHAUST, 9Y6984 AFTERCOOLER ALSO AN ATTACHMENT 3116


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR

INDUSTRIAL ENGINE 3116 INDUSTRIAL ENGINE 4PG
 3116 Industrial Engine 4PG00001-UP SEBP1789 3116 4PG   (1988)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
9Y-6747 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6748 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6749 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-8997 TURBOCHARGER GP
 

#SEBP17890500
 

9Y-6749: TURBOCHARGER GP

9Y-6749 TURBOCHARGER GP
S/N 4PG977-UP
PART OF 9Y-8997 TURBOCHARGER GP
FIELD REPLACEMENT ORDER @@@@@ 9Y-0132@@@@@
FOR USE WITH 7C9446 LINES-AIR, 1W6030 LINES-TURBOCHARGER OIL, 7W9248 MANIFOLD-EXHAUST, 9Y6984 AFTERCOOLER
ALSO AN ATTACHMENT
i00445620 SEBP1789
9Y6749 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-5227 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 9Y-5229 [1] HOUSING  
3. 9Y-5230 [1] HOUSING  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)(COMPR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)(TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
9. 7C-6155 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890501
 

9Y-6750: TURBOCHARGER GP

9Y-6750 TURBOCHARGER GP
Type 1
FOR USE WITH 7C9446 LINES-AIR, 1W6030 LINES-TURBOCHARGER OIL, 7W9248 MANIFOLD-EXHAUST, 9Y6984 AFTERCOOLER
AN ATTACHMENT
i00445632 SEBP1789
9Y6750 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5624 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 7C-5626 [1] HOUSING-COMPRESSOR  
3. 9Y-6482 [1] HOUSING  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)(COMPR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)(TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
9. 7C-6155 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890502
 

9Y-6750: TURBOCHARGER GP

9Y-6750 TURBOCHARGER GP
Type 2
FOR USE WITH 7C9446 LINES-AIR, 1W6030 LINES-TURBOCHARGER OIL, 7W9248 MANIFOLD-EXHAUST, 9Y6984 AFTERCOOLER
AN ATTACHMENT
i00445634 SEBP1789
9Y6750 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8692 CY [1] CARTRIDGE GP-TURBOCHARGER  
2. 9Y-8694 C [1] HOUSING-COMPRESSOR  
3. 9Y-6482 [1] HOUSING  
4. 7C-5802 [3] PLATE-CLAMP (COMPRESSOR)(COMPR)  
5. 7C-6672 [2] PLATE-CLAMP (TURBINE)(TURBINE)  
6. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  8H-3710 [1] SCREW-TAPPING (6-32X0.375-IN)  
7. 7C-6671 M [6] BOLT AS  
8. 7C-6670 M [4] BOLT (M8X1.25X12.5-MM)  
9. 7C-6155 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890503
 

9Y-8997: TURBOCHARGER GP

9Y-8997 TURBOCHARGER GP
i00433683 SEBP1789
9Y8997 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6749 Y [1] TURBOCHARGER GP  
2. 9X-6620 M [4] LOCKNUT (M10X1.5-THD)  
3. 7C-7431 [1] GASKET  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890504
 

149-8280: BASE GP-FUEL FILTER

149-8280 BASE GP-FUEL FILTER
REAR OR REMOTE MOUNTED 2 MICRON FILTER
FOR USE WITH @@@@@149-8281@@@@@, @@@@@149-8282@@@@@, @@@@@152-3894@@@@@, AND, OR
AN ATTACHMENT
i00688402 SEBP1789
1498280 BASE GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-6521 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
2. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
3. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
4. 6N-4414 [1] COVER-FILTER BASE  
5. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
8. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP17890505
 

105-1695: CONTROL GP-FUEL INJECTION

105-1695 CONTROL GP-FUEL INJECTION
S/N 4PG2243-UP
i00188220 SEBP1789
1051695 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-8756 [1] CONTROL GP-FUEL INJECTION  
2. 6V-5683 M [4] BOLT (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP17890506
 

7W-6989: CONTROL GP-FUEL INJECTION

7W-6989 CONTROL GP-FUEL INJECTION
i00187774 SEBP1789
7W6989 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-8756 [1] CONTROL GP-FUEL INJECTION  
2. 6V-5683 M [4] BOLT (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP17890507
 

4N-3829: CONTROL GP-GOVERNOR

4N-3829 CONTROL GP-GOVERNOR
POSITIVE LOCK & VERNIER
PART OF 6I-4028 CONTROL GP-GOVERNOR
AN ATTACHMENT
i00370421 SEBP1789
4N3829 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4282 [1] HUB  
2. 4N-4523 [1] HANDLE AS  
3. 4W-2541 [1] SHAFT  
4. 4W-2542 [1] SPRING  
5. 4N-4520 [1] GUIDE  
6. 5K-0605 [1] PLUG  
7. 3N-3786 [1] ROD-THROTTLE CONTROL  
8. 6B-5150 [2] LOCKNUT  
9. 3N-3787 [1] BRACKET-CONTROL  
10. 4J-6750 [1] SPACER  
11. 2H-0210 [1] SPRING-SHUTOFF  
12. 4N-4519 [1] QUADRANT-CONTROL  
13. 1K-6539 [1] PIN  
  3B-4604 [1] PIN-COTTER  
14. 6N-0775 [1] RATCHET-GOVERNOR CONTROL  
 

#SEBP17890508
 

4N-3830: CONTROL GP-GOVERNOR

4N-3830 CONTROL GP-GOVERNOR
PART OF 7E-6447 CONTROL GP-GOVERNOR
AN ATTACHMENT
i00370425 SEBP1789
4N3830 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4520 [1] GUIDE  
2. 4N-4523 [1] HANDLE AS  
3. 4W-2541 [1] SHAFT  
4. 4W-2542 [1] SPRING  
5. 5K-0605 [1] PLUG  
6. 6N-0775 [1] RATCHET-GOVERNOR CONTROL  
7. 8L-4282 [1] HUB  
 

#SEBP17890509
 

4P-5555: CONTROL GP-GOVERNOR

4P-5555 CONTROL GP-GOVERNOR
AN ATTACHMENT
i00384196 SEBP1789
4P5555 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2505 [1] LEVER  
2. 6V-5683 M [2] BOLT (M6X1X16-MM)  
  M   METRIC PART
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft{1053,1052}
1994/03/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect/Clean
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN 3116, 3126, C-7, C7, C-9, C9, 3306, 3406, C-15, AND 3412 ENGINE MODELS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Turbocharger - Install
3114, 3116 and 3126 Engines
Turbocharger - Remove
3114, 3116 and 3126 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Dealer Installed Air Inlet Heater Starting Aid Available{1058}
1993/09/27
New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3116 :

TURBOCHARGER GP
9Y-6748 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6747 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6746 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6487 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6486 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6481 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6478 TURBOCHARGER GP
TURBOCHARGER GP
9Y-1279 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-6750 TURBOCHARGER GP
TURBOCHARGER GP
9Y-8997 TURBOCHARGER GP
BASE GP-FUEL FILTER
149-8280 BASE GP-FUEL FILTER
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
4N-3829 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.