AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E-7607 PUMP GP-FUEL INJECTION S/N 4PG784-947 3116 INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING

INDUSTRIAL ENGINE 3116 INDUSTRIAL ENGINE 4PG
 3116 Industrial Engine 4PG00001-UP SEBP1789 3116 4PG   (1988)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-8439 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
 

#SEBP17890660
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 4PG784-947
i00187740 SEBP1789
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 107-1230 [1] INJECTOR GP-FUEL  
3. 6V-6228 [1] SEAL-O-RING  
4. 032-8970 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890661
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 4PG948-1498
i00187742 SEBP1789
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 4P-1731 [1] INJECTOR GP-FUEL  
  1P-8116 [1] SEAL-O-RING  
3. 6V-6228 [1] SEAL-O-RING  
4. 032-8970 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890662
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 4PG1499-3517
i00187741 SEBP1789
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
2. 107-1230 [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 125-8274 [1] SEAL-O-RING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890663
 

7E-7607: PUMP GP-FUEL INJECTION

7E-7607 PUMP GP-FUEL INJECTION
S/N 4PG3518-UP
i00187743 SEBP1789
7E7607 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 127-8222 C [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 9X-8267 C [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890664
 

7E-9946: PUMP GP-FUEL INJECTION

7E-9946 PUMP GP-FUEL INJECTION
Type 1
i00392340 SEBP1789
7E9946 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2233 [1] INJECTOR GP-FUEL  
  7E-8953 [1] PUMP GP-FUEL  
  1P-8116 [1] SEAL-O-RING  
2. 032-8970 [1] SEAL-O-RING  
3. 6V-6228 [1] SEAL-O-RING  
4. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890665
 

7E-9946: PUMP GP-FUEL INJECTION

7E-9946 PUMP GP-FUEL INJECTION
Type 2
i00392383 SEBP1789
7E9946 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-1232 [1] INJECTOR GP-FUEL  
2. 125-8274 [1] SEAL-O-RING  
3. 114-8718 [1] SEAL-O-RING  
4. 3T-0849 M [1] BOLT-SOCKET HEAD (M6X1X25-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890666
 

7E-9946: PUMP GP-FUEL INJECTION

7E-9946 PUMP GP-FUEL INJECTION
S/N 4PG997-UP
i00392348 SEBP1789
7E9946 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-8228 C [1] INJECTOR GP-FUEL  
2. 114-8718 [1] SEAL-O-RING  
3. 125-8274 [1] SEAL-O-RING  
4. 139-5925 CM [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
5. 9X-8267 C [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP17890667
 

4N-3287: PUMP GP-FUEL PRIMING

4N-3287 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i00189615 SEBP1789
4N3287 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
3. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
4. 105-2508 [1] PUMP AS-FUEL PRIMING  
  7L-9061 [1] SEAL-O-RING  
  229-3218 [2] VALVE AS (FUEL PRIMING PUMP)  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP17890668
 

4P-6532: PUMP GP-FUEL PRIMING

4P-6532 PUMP GP-FUEL PRIMING
CANNOT BE USED WITH ENGINE MOUNT AIR COMPESSOR OR HYDRAULIC PUMP
AN ATTACHMENT
i00384597 SEBP1789
4P6532 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-5541 [1] PUMP GP-FUEL PRIMING  
2. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
3. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
4. 8T-4971 M [1] BOLT (M6X1X30-MM)  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
7. 9Y-1760 [1] BRACKET-PRIMING PUMP  
8. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
9. 8T-4176 M [1] BOLT (M12X1.75X90-MM)  
10. 4P-6534 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
11. 6V-8397 [4] SEAL-O-RING  
12. 6V-8636 [2] CONNECTOR  
13. 3J-1907 [3] SEAL-O-RING  
14. 4P-6533 [1] TUBE AS  
15. 7E-7373 [1] TUBE AS  
16. 6V-8724 [1] ELBOW  
17. 7C-4949 Y [1] FILTER GP-PRIMARY FUEL  
18. 6V-8723 [1] ELBOW  
19. 3K-0360 [1] SEAL-O-RING  
20. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
21. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
22. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17890669
 

7E-0786: PUMP GP-FUEL PRIMING

7E-0786 PUMP GP-FUEL PRIMING
Type 1
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
i00397532 SEBP1789
7E0786 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3116 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4176 M [1] BOLT (M12X1.75X90-MM)  
2. 8T-4971 M [1] BOLT (M6X1X30-MM)  
  8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 4W-0788 [1] PUMP AS-FUEL PRIMING  
4. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
6. 9Y-1760 [1] BRACKET-PRIMING PUMP  
7. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
8. 3J-1907 [2] SEAL-O-RING  
9. 6V-8724 [1] ELBOW  
10. 9Y-1763 [1] TUBE AS  
  6V-8397 [2] SEAL-O-RING  
11. 6V-8636 [1] CONNECTOR  
  M   METRIC PART
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/06/01
New Fuel Setting Screw Cover And Bolt
1990/07/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Fuel Injector Group Rack Movement
1992/05/01
4P6493 Governor Information Plate Available
1992/06/01
Governor Specifications Are Available Through The Technical Information System
1992/09/01
Replacement Governors For Early Engines
1992/10/01
Unit Injector Tip Seal Deterioration
1993/01/01
Measuring "Dynamic Rack" Of Unit Injectors
1993/06/01
New Fuel Injector Control Linkage
1993/08/01
New Control Assemblies Used In Fuel Injection Control Groups
1993/12/01
Mechanical Unit Injector Identification Code {1290}
1995/12/20
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/22
New Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/22
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/22
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/22
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/23
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/04/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Use 170-9227 Reamer Shims To Aid In Reaming 3100 Engine Injector Sleeves {1250}
1999/03/01
New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23
Operation and Maintenance Manual
Fuel Injection Timing - Check
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Installing Injectors on the 3116, 3116T, and 3126 Industrial Engines{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Unit Injector
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Mechanism
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Unit Injector - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Timing Dimension - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Synchronization - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Unit Injector Misfire
3114, 3116 and 3126 Engines
Unit Injector
3114, 3116 and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116 and 3126 Engines
Unit Injector - Install
3114, 3116 and 3126 Engines
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
Fuel Injector Group Rack Movement{1290}
1992/05/18
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 3116 :

PUMP GP-FUEL INJECTION
7C-8439 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP AS-FUEL TRANSFER
7W-5668 PUMP AS-FUEL TRANSFER
PUMP AS-FUEL TRANSFER
7C-9748 PUMP AS-FUEL TRANSFER
PUMP AS-FUEL TRANSFER
172-4388 PUMP AS-FUEL TRANSFER
PLUG GP-FUEL FILTER LINES
153-6210 PLUG GP-FUEL FILTER LINES
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-9946 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-9946 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-9946 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4P-6532 PUMP GP-FUEL PRIMING

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.