AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3116 Industrial Engine 2WG00001-UP BASIC ENGINE Caterpillar SIS



INDUSTRIAL ENGINE 3116 INDUSTRIAL ENGINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (1988)

Parts group 3116:

  For full view, you need register
BASIC ENGINE
ADAPTER GP-ENGINE TO XMSN
ADAPTER GP-ENGINE TO XMSN
107-2781 ADAPTER GP-ENGINE TO XMSN
107-2781 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
108-4923 ADAPTER GP-ENGINE TO XMSN
108-4923 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SPACERLESS TRANSMISSIONS
AN ATTACHMENT
ADAPTER GP-ENGINE TO XMSN
7E-6309 ADAPTER GP-ENGINE TO XMSN
7E-6309 ADAPTER GP-ENGINE TO XMSN
SPACERLESS TRANSMISSION
FOR USE WITH @@@@@ 7E-7628@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
AIR COMPRESSOR AS
4P-5433 AIR COMPRESSOR AS
4P-5433 AIR COMPRESSOR AS
PART OF 7E-2303 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR AS
4P-5435 AIR COMPRESSOR AS
4P-5435 AIR COMPRESSOR AS
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 4P-3956 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
4P-3956 AIR COMPRESSOR GP
4P-3956 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 4P-3957 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
4P-3957 AIR COMPRESSOR GP
4P-3957 AIR COMPRESSOR GP
13.2 CFM AT 1250RPM. TU-FLO 550
FOR USE WITH @@@@@ 4P-0564@@@@@
AN ATTACHMENT
7E-2302 AIR COMPRESSOR GP
7E-2302 AIR COMPRESSOR GP
CANNOT BE USED WITH PUMP DRIVE OR LEFT FRONT OIL FILLER & DIPSTICK
AN ATTACHMENT
AIR COMPRESSOR GP
7E-2303 AIR COMPRESSOR GP
7E-2303 AIR COMPRESSOR GP
PART OF 7E-2302 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
9Y-9942 AIR COMPRESSOR GP
9Y-9942 AIR COMPRESSOR GP
S/N 2WG1403-UP
CANNOT BE USED WITH PUMP DRIVE OR LEFT FRONT OIL FILLER & DIPSTICK
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
9Y-9943 AIR COMPRESSOR GP
9Y-9943 AIR COMPRESSOR GP
S/N 2WG1403-UP
12 CFM AT 1250 RPM. TU-FLO 501
PART OF 9Y-9942 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
4P-4703 LINES GP-AIR COMPRESSOR
4P-4703 LINES GP-AIR COMPRESSOR
S/N 2WG1403-UP
ALSO AN ATTACHMENT
LINES GP-AIR COMPRESSOR
6I-3885 LINES GP-AIR COMPRESSOR
6I-3885 LINES GP-AIR COMPRESSOR
Type 1
FOR USE WITH @@@@@ 4P-3957@@@@@
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
6I-3885 LINES GP-AIR COMPRESSOR
6I-3885 LINES GP-AIR COMPRESSOR
Type 2
FOR USE WITH @@@@@ 4P-3957@@@@@
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
7E-4859 LINES GP-AIR COMPRESSOR
7E-4859 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@ 7E-2302@@@@@
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
9Y-9645 LINES GP-AIR COMPRESSOR
9Y-9645 LINES GP-AIR COMPRESSOR
FOR USE WITH INDUSTRIAL AIR COMPRESSOR
AN ATTACHMENT
BELT TIGHTENER GP
BELT TIGHTENER GP
111-2387 BELT TIGHTENER GP
111-2387 BELT TIGHTENER GP
FOR USE WITH @@@@@ 7C-0044@@@@@, C & D RADIATOR WITH 8M-8341 V-BELT SET
CANNOT BE USED WITH ALTERNATOR
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
100-4966 CAMSHAFT GP
100-4966 CAMSHAFT GP
S/N 2WG3930-UP
CAMSHAFT GP
2W-9608 CAMSHAFT GP
2W-9608 CAMSHAFT GP
CARRIER GP-SEAL
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CLUTCH GP
CLUTCH AS
5N-3789 CLUTCH AS
5N-3789 CLUTCH AS
PART OF 4W-2650 CLUTCH GP
AN ATTACHMENT
CLUTCH GP
2W-4900 CLUTCH GP
2W-4900 CLUTCH GP
PART OF 2W-4901 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
3N-9097 CLUTCH GP
3N-9097 CLUTCH GP
PART OF 3N-9098 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
4P-2270 CLUTCH GP
4P-2270 CLUTCH GP
PART OF 6I-0415 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
4P-3073 CLUTCH GP
4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT
CLUTCH GP
4W-2650 CLUTCH GP
4W-2650 CLUTCH GP
PART OF 4W-2651 POWER TAKE-OFF GP
AN ATTACHMENT
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-REFRIGERANT COMPR
9Y-0642 MOUNTING GP-REFRIGERANT COMPR
9Y-0642 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH @@@@@ 7C-0044@@@@@
AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
9Y-7252 MOUNTING GP-REFRIGERANT COMPR
9Y-7252 MOUNTING GP-REFRIGERANT COMPR
S/N 2WG3126-UP
PROVIDES BELT TENSIONER
FOR USE WITH 7-GROOVE CRANKSHAFT PULLEY
AN ATTACHMENT
CRANKSHAFT GP
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CRANKSHAFT GP
113-6087 CRANKSHAFT GP
113-6087 CRANKSHAFT GP
S/N 2WG3022-UP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
S/N 2WG1-6468
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
S/N 2WG6459-UP
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
S/N 2WG1-4480
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
S/N 2WG3022-UP
SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
4W-1016 SEAL GP-CRANKSHAFT
S/N 2WG1-5572
CYLINDER BLOCK GP
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
COVER GP-CYLINDER BLOCK
4P-0564 COVER GP-CYLINDER BLOCK
4P-0564 COVER GP-CYLINDER BLOCK
S/N 2WG3126-6699
FOR USE WITH AIR COMPRESSOR
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
4P-4701 COVER GP-CYLINDER BLOCK
4P-4701 COVER GP-CYLINDER BLOCK
S/N 2WG1403-UP
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
4P-5107 COVER GP-CYLINDER BLOCK
4P-5107 COVER GP-CYLINDER BLOCK
S/N 2WG3930-4574
COVER GP-CYLINDER BLOCK
4P-5107 COVER GP-CYLINDER BLOCK
4P-5107 COVER GP-CYLINDER BLOCK
S/N 2WG4575-UP
COVER GP-CYLINDER BLOCK
4W-2108 COVER GP-CYLINDER BLOCK
4W-2108 COVER GP-CYLINDER BLOCK
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
S/N 2WG385-UP
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
S/N 2WG1-4807
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
FOR USE WHEN LARGE HYDRAULIC PUMPS ARE MOUNTED ON ENGINE.
Type 1
CANNOT BE USED WITH OIL PRESSURE CONTACTOR
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
FOR USE WHEN LARGE HYDRAULIC PUMPS ARE MOUNTED ON ENGINE.
Type 2
CANNOT BE USED WITH OIL PRESSURE CONTACTOR
AN ATTACHMENT
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
S/N 2WG5280-6039
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
S/N 2WG6040-6468
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
S/N 2WG6469-UP
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 2WG1-5280
FOR USE WITH ONE-PIECE PISTONS
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 2WG5281-UP
FOR USE WITH ONE-PIECE PISTONS
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 2WG6040-6468
FOR USE WITH ONE-PIECE PISTONS
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
S/N 2WG6469-UP
FOR USE WITH ONE-PIECE PISTONS
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
S/N 2WG1-5280
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
S/N 2WG1040-5279
FOR USE WITH TWO-PIECE PISTONS
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
S/N 2WG5280-6039
FOR USE WITH TWO-PIECE PISTONS
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
S/N 2WG6040-6468
FOR USE WITH TWO-PIECE PISTONS
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
S/N 2WG6469-UP
FOR USE WITH TWO-PIECE PISTONS
CYLINDER HEAD GP
CYLINDER HEAD AS
107-7609 CYLINDER HEAD AS
107-7609 CYLINDER HEAD AS
S/N 2WG4475-UP
PART OF 107-7742, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@107-7720@@@@@
CYLINDER HEAD AS
107-7720 CYLINDER HEAD AS
107-7720 CYLINDER HEAD AS
S/N 2WG4487-UP
FIELD REPLACEMENT FOR @@@@@107-7609@@@@@
CYLINDER HEAD AS
115-4107 CYLINDER HEAD AS
115-4107 CYLINDER HEAD AS
PART OF 115-4165 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@126-0445@@@@@, @@@@@140-7373@@@@@
CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS
S/N 2WG4487-UP
PART OF 119-3067 CYLINDER HEAD AS, 119-3066, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
CYLINDER HEAD AS
119-3067 CYLINDER HEAD AS
119-3067 CYLINDER HEAD AS
S/N 2WG4487-UP
FIELD INSTALLATION
CYLINDER HEAD AS
126-0445 CYLINDER HEAD AS
126-0445 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@126-5867@@@@@, @@@@@115-4107@@@@@
CYLINDER HEAD AS
126-0467 CYLINDER HEAD AS
126-0467 CYLINDER HEAD AS
S/N 2WG5969-UP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
FIELD INSTALLATION
CYLINDER HEAD AS
126-0496 CYLINDER HEAD AS
126-0496 CYLINDER HEAD AS
S/N 2WG5969-UP
PART OF 126-0467 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
CYLINDER HEAD AS
126-5867 CYLINDER HEAD AS
126-5867 CYLINDER HEAD AS
PART OF 126-0445 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@126-0445@@@@@
CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
140-7373 CYLINDER HEAD AS
S/N 2WG4487-UP
FIELD REPLACEMENT FOR @@@@@119-3065@@@@@, @@@@@126-0467@@@@@, @@@@@126-0467@@@@@, @@@@@190-9066@@@@@, @@@@@115-4107@@@@@
CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
190-9066 CYLINDER HEAD AS
S/N 2WG6580-6699
PART OF 140-7373 CYLINDER HEAD AS, 140-7371 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@140-7373@@@@@
CYLINDER HEAD AS
4P-8262 CYLINDER HEAD AS
4P-8262 CYLINDER HEAD AS
S/N 2WG3236-4486
PART OF 107-7742, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER 105-1770 CYLINDER HEAD AS
CYLINDER HEAD GP
107-7741 CYLINDER HEAD GP
107-7741 CYLINDER HEAD GP
S/N 2WG3930-5372
CYLINDER HEAD GP
107-7741 CYLINDER HEAD GP
107-7741 CYLINDER HEAD GP
S/N 2WG5373-UP
CYLINDER HEAD GP
107-7742 CYLINDER HEAD GP
107-7742 CYLINDER HEAD GP
S/N 2WG3930-4486
PART OF 107-7741 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5136@@@@@
CYLINDER HEAD GP
107-7742 CYLINDER HEAD GP
107-7742 CYLINDER HEAD GP
S/N 2WG4487-5372
PART OF 107-7741 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5136@@@@@
CYLINDER HEAD GP
115-4165 CYLINDER HEAD GP
115-4165 CYLINDER HEAD GP
PART OF 9Y-8871 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
CYLINDER HEAD GP
119-3066 CYLINDER HEAD GP
119-3066 CYLINDER HEAD GP
S/N 2WG5373-UP
PART OF 107-7741, 160-5136 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5136@@@@@
CYLINDER HEAD GP
126-0484 CYLINDER HEAD GP
126-0484 CYLINDER HEAD GP
S/N 2WG5969-UP
CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
140-7371 CYLINDER HEAD GP
S/N 2WG5969-UP
PART OF 159-0305, 160-5130 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@160-5130@@@@@
CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
159-0305 CYLINDER HEAD GP
S/N 2WG3022-UP
CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
160-5130 CYLINDER HEAD GP
S/N 2WG5969-UP
PART OF 126-0484 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@115-4165@@@@@, @@@@@140-7371@@@@@
CYLINDER HEAD GP
160-5136 CYLINDER HEAD GP
160-5136 CYLINDER HEAD GP
S/N 2WG4487-5372
FIELD REPLACEMENT FOR @@@@@107-7742@@@@@, @@@@@119-3066@@@@@
CYLINDER HEAD GP
4P-2140 CYLINDER HEAD GP
4P-2140 CYLINDER HEAD GP
S/N 2WG1040-UP
PART OF 4P-2141 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-2141 CYLINDER HEAD GP
4P-2141 CYLINDER HEAD GP
S/N 2WG1040-1334
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
S/N 2WG3236-4474; 2WG4482-4486
PART OF 4P-8264 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@160-5130@@@@@
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
S/N 2WG4475-4481; 2WG4487-UP
PART OF 4P-8264 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@160-5130@@@@@
CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
4P-8263 CYLINDER HEAD GP
S/N 2WG4487-5968
PART OF 4P-8264 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@160-5130@@@@@
CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
4P-8264 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
S/N 2WG1-545
FOR FIELD REPLACEMENT OF 7W3278 CYLINDER HEAD AS ORDER 9Y6166
PART OF 4W-1099 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
4W-0737 CYLINDER HEAD GP
S/N 2WG546-765
FOR FIELD REPLACEMENT OF 7W3278 CYLINDER HEAD AS ORDER 9Y6166
PART OF 4W-1099 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-1099 CYLINDER HEAD GP
4W-1099 CYLINDER HEAD GP
S/N 2WG1-765
CYLINDER HEAD GP
6I-2121 CYLINDER HEAD GP
6I-2121 CYLINDER HEAD GP
S/N 2WG1403-UP
AIR COMPRESSOR
PART OF 9Y-9943 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
9Y-8850 CYLINDER HEAD GP
9Y-8850 CYLINDER HEAD GP
NON-SWIRL
PART OF 9Y-8871 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
NON-SWIRL
CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
9Y-8871 CYLINDER HEAD GP
S/N 2WG1335-UP
NON-SWIRL
DAMPER GP
DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
AN ATTACHMENT
DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
190 MM DIAMETER 3 GROOVES AND 250 MM DAMPER DIAMETER
DAMPER & PULLEY GP
7C-8445 DAMPER & PULLEY GP
7C-8445 DAMPER & PULLEY GP
304.8 MM DIAMETER SOLID DAMPER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
7E-9261 DAMPER & PULLEY GP
7E-9261 DAMPER & PULLEY GP
264 MM (10.4 IN) OD PULLEY 3 GROOVES AND 250 MM DAMPER DIAMETER
AN ATTACHMENT
DAMPER GP
4P-4451 DAMPER GP
4P-4451 DAMPER GP
S/N 2WG3126-6699
304.8MM DIAMETER SOLID DAMPER. REQUIRED ON 275 HP AND ABOVE
FOR USE WITH @@@@@ 4P-4452@@@@@
ALSO AN ATTACHMENT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
113-6261 DRIVE GP-ACCESSORY
113-6261 DRIVE GP-ACCESSORY
"9" TOOTH SPLINED DRIVE
AN ATTACHMENT
DRIVE GP-ACCESSORY
113-6262 DRIVE GP-ACCESSORY
113-6262 DRIVE GP-ACCESSORY
"11" TOOTH SPLINE DRIVE
CANNOT BE USED WITH @@@@@ 7E-2986@@@@@, @@@@@ 4P-5107@@@@@, AIR COMPRESSOR, LH OIL FILTER
AN ATTACHMENT
DRIVE GP-ACCESSORY
113-6263 DRIVE GP-ACCESSORY
113-6263 DRIVE GP-ACCESSORY
SPLINED
CANNOT BE USED WITH @@@@@ 7E-2986@@@@@, @@@@@ 4P-5107@@@@@, AIR COMPRESSOR, LH OIL FILTER
AN ATTACHMENT
DRIVE GP-ACCESSORY
7C-1682 DRIVE GP-ACCESSORY
7C-1682 DRIVE GP-ACCESSORY
ROTATION IS COUNTER-CLOCKWISE VIEWED FROM THE DRIVE END OF PUMP
FOR USE WITH HYDRAULIC PUMP WITH 1.5 TAPERED SHAFT
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
7E-1317 DRIVE GP-ACCESSORY
7E-1317 DRIVE GP-ACCESSORY
ROTATION IS COUNTER-CLOCKWISE VIEWED FROM DRIVE END OF PUMP.
FOR USE WITH SAE B HYDRAULIC PUMP WITH STRAIGHT SHAFT
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
7E-8692 DRIVE GP-ACCESSORY
7E-8692 DRIVE GP-ACCESSORY
FOR USE WITH SAE "A" HYDRAULIC PUMP
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
7E-8945 DRIVE GP-ACCESSORY
7E-8945 DRIVE GP-ACCESSORY
ROTATION IS COUNTER-CLOCKWISE VIEWED FROM DRIVE END OF PUMP.
FOR USE WITH SAE B-B HYDRAULIC PUMP WITH 1:8 TAPERED SHAFT
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
9Y-0608 DRIVE GP-ACCESSORY
9Y-0608 DRIVE GP-ACCESSORY
60 HP AT 2200 RPM AND ABOVE. 55 MAX HP AT 2000 RPM. ROTATION IS COUNTER-CLOCKWISE VIEWED FROM DRIVE END OF PUMP
FOR USE WITH SAE B HYDRAULIC PUMP WITH 1:8 TAPERED SHAFT
AN ATTACHMENT
DRIVE GP-ACCESSORY
9Y-3827 DRIVE GP-ACCESSORY
9Y-3827 DRIVE GP-ACCESSORY
MAXIMUM INPUT 30 HP AT 2000 RPM AND ABOVE. ROTATION IS COUNTER-CLOCKWISE FROM DRIVE END OF PUMP.
FOR USE WITH SAE A HYDRAULIC PUMP WITH TAPERED SHAFT
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
9Y-7865 DRIVE GP-ACCESSORY
9Y-7865 DRIVE GP-ACCESSORY
FOR USE WITH SAE "B" PUMP WITH A "B-B" SHAFT
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
107-2778 DRIVE GP-FAN
107-2778 DRIVE GP-FAN
8:1 DRIVE RATIO
AN ATTACHMENT
DRIVE GP-FAN
107-2779 DRIVE GP-FAN
107-2779 DRIVE GP-FAN
1:1 DRIVE RATIO
AN ATTACHMENT
DRIVE GP-FAN
4P-4713 DRIVE GP-FAN
4P-4713 DRIVE GP-FAN
S/N 2WG1660-UP
BELT
DRIVE GP-FAN
4P-8116 DRIVE GP-FAN
4P-8116 DRIVE GP-FAN
S/N 2WG1660-UP
PART OF 4P-4713 DRIVE GP-FAN
DRIVE GP-FAN
7C-0044 DRIVE GP-FAN
7C-0044 DRIVE GP-FAN
S/N 2WG1361-UP
DOES NOT INCLUDE DRIVE BELTS, DRIVE PULLEY OR FAN ADAPTER
FOR USE WITH INDUSTRIAL ENGINE WITH FAN DRIVE REQUIREMENTS
ALSO AN ATTACHMENT
DRIVE GP-FAN
7C-8442 DRIVE GP-FAN
7C-8442 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-FAN
7E-1479 DRIVE GP-FAN
7E-1479 DRIVE GP-FAN
BELT
FOR USE WITH FRONT ENGINE SUPPORT
AN ATTACHMENT
DRIVE GP-FAN
7E-1480 DRIVE GP-FAN
7E-1480 DRIVE GP-FAN
PART OF 7E-1479 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-FAN
7E-3257 DRIVE GP-FAN
7E-3257 DRIVE GP-FAN
BELT
FOR USE WITH GEN SET & STATIONARY INDUSTRIAL ENGINES & CAT SUPPLIED RADIATORS
AN ATTACHMENT
DRIVE GP-FAN
9Y-0194 DRIVE GP-FAN
9Y-0194 DRIVE GP-FAN
PART OF 7C-8442, 7E-3257 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-WATER PUMP
4W-5428 DRIVE GP-WATER PUMP
4W-5428 DRIVE GP-WATER PUMP
AN ATTACHMENT
DRIVE GP-WATER PUMP
7C-6998 DRIVE GP-WATER PUMP
7C-6998 DRIVE GP-WATER PUMP
BELT
DRIVE GP-WATER PUMP
7E-3291 DRIVE GP-WATER PUMP
7E-3291 DRIVE GP-WATER PUMP
BELT
FLYWHEEL GP
ADAPTER GP-ENGINE TO XMSN
107-2781 ADAPTER GP-ENGINE TO XMSN
107-2781 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
108-4923 ADAPTER GP-ENGINE TO XMSN
108-4923 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SPACERLESS TRANSMISSIONS
AN ATTACHMENT
ADAPTER GP-ENGINE TO XMSN
7E-6309 ADAPTER GP-ENGINE TO XMSN
7E-6309 ADAPTER GP-ENGINE TO XMSN
SPACERLESS TRANSMISSION
FOR USE WITH @@@@@ 7E-7628@@@@@
AN ATTACHMENT
FLYWHEEL GP
100-6578 FLYWHEEL GP
100-6578 FLYWHEEL GP
FOR USE WITH SAE NO.1 FLYWHEEL HOUSING
AN ATTACHMENT
FLYWHEEL GP
113-6265 FLYWHEEL GP
113-6265 FLYWHEEL GP
FOR USE WITH SAE #3
AN ATTACHMENT
FLYWHEEL GP
9Y-0292 FLYWHEEL GP
9Y-0292 FLYWHEEL GP
FOR USE WITH @@@@@ 4W-1103@@@@@, @@@@@ 9Y-0054@@@@@, SAE #2 FLYWHEEL HOUSING, 14 INCH, 2 PLATE, OR LIPE ML-PT DEEP POT-TYPE CLUTCHES
AN ATTACHMENT
FLYWHEEL GP
9Y-0574 FLYWHEEL GP
9Y-0574 FLYWHEEL GP
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING, 10 & 11.5 INCH OVER-CENTER CLUTCHES
AN ATTACHMENT
FLYWHEEL GP
9Y-2755 FLYWHEEL GP
9Y-2755 FLYWHEEL GP
S/N 2WG1361-2592
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING & 10 OR 11.5-IN OVER CENTER CLUTCH
ALSO AN ATTACHMENT
FLYWHEEL GP
9Y-4142 FLYWHEEL GP
9Y-4142 FLYWHEEL GP
FOR COSA USAGE ONLY
FOR USE WITH NO.2 FLYWHEEL HOUSING & 10 IN. OR 11.50 IN. OVER-CENTER CLUTCHES, METRIC THREADS PREFERRED AT CLUTCH MOUNTING FACE
AN ATTACHMENT
FLYWHEEL GP
9Y-6277 FLYWHEEL GP
9Y-6277 FLYWHEEL GP
S/N 2WG1403-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING & 11.5 OR 14 IN. CLUTCH
ALSO AN ATTACHMENT
FLYWHEEL GP
9Y-6706 FLYWHEEL GP
9Y-6706 FLYWHEEL GP
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING OR 14 INCH SINGLE PLATE CLUTCH
AN ATTACHMENT
FLYWHEEL GP
9Y-7506 FLYWHEEL GP
9Y-7506 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING & LIPE ROLLWAY 15.5 INCH 2 PLATE CLUTCH
AN ATTACHMENT
FLYWHEEL GP
9Y-8979 FLYWHEEL GP
9Y-8979 FLYWHEEL GP
FOR USE WITH #3 FLYWHEEL HOUSING AND CENTAFLEX DRIVE HOUSING
AN ATTACHMENT
MOUNTING GP-TORQUE CONVERTER
9Y-4146 MOUNTING GP-TORQUE CONVERTER
9Y-4146 MOUNTING GP-TORQUE CONVERTER
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING
AN ATTACHMENT
MOUNTING GP-TRANSMISSION
9Y-4144 MOUNTING GP-TRANSMISSION
9Y-4144 MOUNTING GP-TRANSMISSION
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING, REQUIRES FLYWHEEL HOUSING WITH ACCESS HOLES FOR FLYWHEEL TO TRANSMISSION MOUNTING BOLTS
AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
101-4540 GEAR GP-FRONT
101-4540 GEAR GP-FRONT
S/N 2WG3022-UP
GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
S/N 2WG1040-UP
HOUSING GP-FRONT
101-4575 HOUSING GP-FRONT
101-4575 HOUSING GP-FRONT
S/N 2WG3022-UP
HOUSING GP-FRONT
7E-5620 HOUSING GP-FRONT
7E-5620 HOUSING GP-FRONT
S/N 2WG859-1242
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 2WG1-829
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 2WG830-858; 2WG1040-1241
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
GUARD GP-BELT
GUARD GP-BELT
7E-5128 GUARD GP-BELT
7E-5128 GUARD GP-BELT
EXTENDED
AN ATTACHMENT
GUARD GP-BELT
7E-5132 GUARD GP-BELT
7E-5132 GUARD GP-BELT
NON-EXTENDED
AN ATTACHMENT
GUARD GP-BELT
7E-5824 GUARD GP-BELT
7E-5824 GUARD GP-BELT
FOR USE WITH @@@@@ 7T-2095@@@@@, BASE MOUNTED RADIATOR
ALSO AN ATTACHMENT
GUARD GP-BELT
7E-5825 GUARD GP-BELT
7E-5825 GUARD GP-BELT
FOR USE WITH BASE MOUNTED RADIATOR & FRONT SUPPORT
ALSO AN ATTACHMENT
GUARD GP-BELT
7E-5826 GUARD GP-BELT
7E-5826 GUARD GP-BELT
FOR USE WITH BASE MOUNTED RADIATOR & FRONT SUPPORT
ALSO AN ATTACHMENT
GUARD GP-BELT
9Y-5234 GUARD GP-BELT
9Y-5234 GUARD GP-BELT
FOR USE WITH CRITICAL SILENCER & INDUSTRIAL SILENCER
CANNOT BE USED WITH ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
9Y-6144 GUARD GP-BELT
9Y-6144 GUARD GP-BELT
FOR USE WITH @@@@@ 7T-2095@@@@@
AN ATTACHMENT
GUARD GP-BELT
9Y-6453 GUARD GP-BELT
9Y-6453 GUARD GP-BELT
FOR USE WITH @@@@@ 9Y-5323@@@@@, RADIATOR SUPPORT AND BASE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
ADAPTER GP-ENGINE TO XMSN
107-2781 ADAPTER GP-ENGINE TO XMSN
107-2781 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
108-4923 ADAPTER GP-ENGINE TO XMSN
108-4923 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SPACERLESS TRANSMISSIONS
AN ATTACHMENT
ADAPTER GP-ENGINE TO XMSN
7E-6309 ADAPTER GP-ENGINE TO XMSN
7E-6309 ADAPTER GP-ENGINE TO XMSN
SPACERLESS TRANSMISSION
FOR USE WITH @@@@@ 7E-7628@@@@@
AN ATTACHMENT
HOUSING GP-FLYWHEEL
100-6568 HOUSING GP-FLYWHEEL
100-6568 HOUSING GP-FLYWHEEL
S/N 2WG4762-UP
FOR USE WITH # 1 SAE FLYWHEEL
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
100-6570 HOUSING GP-FLYWHEEL
100-6570 HOUSING GP-FLYWHEEL
FOR USE WITH @@@@@ 9Y-6706@@@@@, SAE NO. 2 VERTICAL HOUSING INSTALLATION WITH LH STARTER
AN ATTACHMENT
HOUSING GP-FLYWHEEL
4W-1103 HOUSING GP-FLYWHEEL
4W-1103 HOUSING GP-FLYWHEEL
SAE NO. 2. PROVIDES STARTING MOTOR MOUNTING FLANGE ON RH SIDE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
6I-2990 HOUSING GP-FLYWHEEL
6I-2990 HOUSING GP-FLYWHEEL
SAE NO. 2 FLYWHEEL HOUSING WITH IN-ROTATION TIMING HOLE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
7E-3717 HOUSING GP-FLYWHEEL
7E-3717 HOUSING GP-FLYWHEEL
FOR USE WITH SAE NO.2 FLYWHEEL
AN ATTACHMENT
HOUSING GP-FLYWHEEL
7E-7628 HOUSING GP-FLYWHEEL
7E-7628 HOUSING GP-FLYWHEEL
FOR USE WITH SPACER-LESS TRANSMISSION
AN ATTACHMENT
HOUSING GP-FLYWHEEL
7W-8813 HOUSING GP-FLYWHEEL
7W-8813 HOUSING GP-FLYWHEEL
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING EQUIPPED WITH STARTING MOTOR MOUNTING FLANGE ON RH SIDE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
9Y-0016 HOUSING GP-FLYWHEEL
9Y-0016 HOUSING GP-FLYWHEEL
PROVIDES NO. 3 FLYWHEEL HOUSING
AN ATTACHMENT
HOUSING GP-FLYWHEEL
9Y-0054 HOUSING GP-FLYWHEEL
9Y-0054 HOUSING GP-FLYWHEEL
PROVIDES NO. 2 FLYWHEEL HOUSING
AN ATTACHMENT
HOUSING GP-FLYWHEEL
9Y-4856 HOUSING GP-FLYWHEEL
9Y-4856 HOUSING GP-FLYWHEEL
S/N 2WG1361-2592
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
9Y-6280 HOUSING GP-FLYWHEEL
9Y-6280 HOUSING GP-FLYWHEEL
S/N 2WG1403-3336
FOR USE WITH NO. 1 SAE FLYWHEEL
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
9Y-6280 HOUSING GP-FLYWHEEL
9Y-6280 HOUSING GP-FLYWHEEL
S/N 2WG3337-3485
FOR USE WITH NO. 1 SAE FLYWHEEL
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
9Y-6280 HOUSING GP-FLYWHEEL
9Y-6280 HOUSING GP-FLYWHEEL
S/N 2WG3486-4761
FOR USE WITH NO. 1 SAE FLYWHEEL
ALSO AN ATTACHMENT
MOUNTING GP-TORQUE CONVERTER
9Y-4146 MOUNTING GP-TORQUE CONVERTER
9Y-4146 MOUNTING GP-TORQUE CONVERTER
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING
AN ATTACHMENT
MOUNTING GP-TRANSMISSION
9Y-4144 MOUNTING GP-TRANSMISSION
9Y-4144 MOUNTING GP-TRANSMISSION
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING, REQUIRES FLYWHEEL HOUSING WITH ACCESS HOLES FOR FLYWHEEL TO TRANSMISSION MOUNTING BOLTS
AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
S/N 2WG483-UP
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
S/N 2WG1-4807
COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
S/N 2WG1979-UP
FOR USE WITH @@@@@ 4P-3957@@@@@
ALSO AN ATTACHMENT
GEAR GP-FRONT
101-4540 GEAR GP-FRONT
101-4540 GEAR GP-FRONT
S/N 2WG3022-UP
GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
2W-8475 GEAR GP-FRONT
S/N 2WG1040-UP
HOUSING GP-FRONT
101-4575 HOUSING GP-FRONT
101-4575 HOUSING GP-FRONT
S/N 2WG3022-UP
HOUSING GP-FRONT
7E-5620 HOUSING GP-FRONT
7E-5620 HOUSING GP-FRONT
S/N 2WG859-1242
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 2WG1-829
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
S/N 2WG830-858; 2WG1040-1241
HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
7L-0002 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
4W-2515 LIFTING GP-ENGINE
4W-2515 LIFTING GP-ENGINE
FOR USE WITH @@@@@ 9Y-3946@@@@@
LIFTING GP-ENGINE
7E-2314 LIFTING GP-ENGINE
7E-2314 LIFTING GP-ENGINE
S/N 2WG3126-6699
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
159-1520 MOUNTING GP-ALTERNATOR
159-1520 MOUNTING GP-ALTERNATOR
FOR USE WITH THREE BELT FAN DRIVE
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
4P-4702 MOUNTING GP-ALTERNATOR
4P-4702 MOUNTING GP-ALTERNATOR
S/N 2WG1403-1978
MOUNTING GP-ALTERNATOR
6I-0084 MOUNTING GP-ALTERNATOR
6I-0084 MOUNTING GP-ALTERNATOR
S/N 2WG1979-UP
FOR USE WITH DOUBLE LUG ALTERNATORS
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9Y-3946 MOUNTING GP-ALTERNATOR
9Y-3946 MOUNTING GP-ALTERNATOR
S/N 2WG1361-2592
FOR USE WITH @@@@@ 4W-2515@@@@@, @@@@@ 5S-9088@@@@@, @@@@@ 6N-9294@@@@@
CANNOT BE USED WITH @@@@@ 7C-8442@@@@@
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9Y-5371 MOUNTING GP-ALTERNATOR
9Y-5371 MOUNTING GP-ALTERNATOR
FOR USE WITH ALTERNATOR WITH 50.7 PIVOT SPOOL LENGTH, 10 MM (.39 IN) PIVOT BOLT DIAMETER & EITHER 167.6 OR 183 SWING RADIUS
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
9Y-8995 MOUNTING GP-ALTERNATOR
9Y-8995 MOUNTING GP-ALTERNATOR
FOR USE WITH 7 RIB POLY-RIB FAN DRIVE
AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
101-4631 MOUNTING GP-ENGINE
101-4631 MOUNTING GP-ENGINE
FOR USE WITH LIGHT DUTY BASE
AN ATTACHMENT
MOUNTING GP-ENGINE
109-8861 MOUNTING GP-ENGINE
109-8861 MOUNTING GP-ENGINE
S/N 2WG3486-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, C OR D RADIATOR & LIGHT DUTY BASE
AN ATTACHMENT
MOUNTING GP-ENGINE
9Y-2105 MOUNTING GP-ENGINE
9Y-2105 MOUNTING GP-ENGINE
FOR USE WITH INDUSTRIAL BASE AND SAE #2 OR #3 FLYWHEEL HOUSINGS
AN ATTACHMENT
SUPPORT GP-ENGINE
100-5728 SUPPORT GP-ENGINE
100-5728 SUPPORT GP-ENGINE
AN ATTACHMENT
SUPPORT GP-ENGINE
7C-0800 SUPPORT GP-ENGINE
7C-0800 SUPPORT GP-ENGINE
FOR USE WITH ENGINES WHICH REQUIRE A FRONT SUPPORT WITH A SINGLE POINT MOUNT
AN ATTACHMENT
SUPPORT GP-ENGINE
7C-1687 SUPPORT GP-ENGINE
7C-1687 SUPPORT GP-ENGINE
S/N 2WG1403-UP
ALSO AN ATTACHMENT
SUPPORT GP-ENGINE
7C-6996 SUPPORT GP-ENGINE
7C-6996 SUPPORT GP-ENGINE
FOR USE WITH APPLICATIONS REQUIRING FRONT PEDESTAL SUPPORTS AT SIDE OF BLOCK
CANNOT BE USED WITH INSTALLED RADIATOR
AN ATTACHMENT
SUPPORT GP-ENGINE
7E-0314 SUPPORT GP-ENGINE
7E-0314 SUPPORT GP-ENGINE
FOR USE WITH MOBILE ENGINES WHICH REQUIRE SINGLE POINT FRONT MOUNTING
AN ATTACHMENT
SUPPORT GP-ENGINE
7E-1717 SUPPORT GP-ENGINE
7E-1717 SUPPORT GP-ENGINE
S/N 2WG1361-2592
FOR USE WITH MOBILE ENGINES WHICH REQUIRE SINGLE POINT FRONT MOUNTING
CANNOT BE USED WITH INSTALLED RADIATOR, RUBBER DAMPER
ALSO AN ATTACHMENT
SUPPORT GP-ENGINE
7E-2770 SUPPORT GP-ENGINE
7E-2770 SUPPORT GP-ENGINE
FOR USE WITH FRONT & REAR SUPPORT
AN ATTACHMENT
SUPPORT GP-ENGINE
9Y-6324 SUPPORT GP-ENGINE
9Y-6324 SUPPORT GP-ENGINE
FRONT
FOR USE WITH INDUSTRIAL ENGINE BASE (HARD MOUNT)
AN ATTACHMENT
SUPPORT GP-ENGINE
9Y-7701 SUPPORT GP-ENGINE
9Y-7701 SUPPORT GP-ENGINE
FOR USE WITH SUPPORT OR BASE
AN ATTACHMENT
PAN GP-OIL
DRAIN GP-ENGINE OIL
129-5731 DRAIN GP-ENGINE OIL
129-5731 DRAIN GP-ENGINE OIL
FOR USE WITH ALUMINUM OIL PANS THAT REQUIRE A LONGER PLUG
AN ATTACHMENT
6I-4075 DRAIN GP-ENGINE OIL
6I-4075 DRAIN GP-ENGINE OIL
S/N 2WG3188-5852
FOR USE WITH OIL PAN THAT REQUIRES ADDITIONAL DRAIN PLUG
ALSO AN ATTACHMENT
DRAIN GP-ENGINE OIL
7C-4532 DRAIN GP-ENGINE OIL
7C-4532 DRAIN GP-ENGINE OIL
PROVIDES A DRAIN VALVE FOR OIL PAN DRAIN
AN ATTACHMENT
DRAIN GP-ENGINE OIL
7C-4566 DRAIN GP-ENGINE OIL
7C-4566 DRAIN GP-ENGINE OIL
FOR USE WITH ALUMINUM OIL PANS THAT REQUIRE AN ADDITIONAL LONG PLUG, 28-LITER OIL PANS, C9 ACERT WET PETROLEUM ENGINE WHEN USING AN AIR COMPRESSOR OPTION
ALSO AN ATTACHMENT
PAN GP-OIL
105-1557 PAN GP-OIL
105-1557 PAN GP-OIL
S/N 2WG3183-4476
PAN GP-OIL
115-5340 PAN GP-OIL
115-5340 PAN GP-OIL
S/N 2WG4477-UP
PAN GP-OIL
135-0330 PAN GP-OIL
135-0330 PAN GP-OIL
S/N 2WG3022-UP
32 LITER REVERSIBLE
FOR USE WITH @@@@@135-0339@@@@@, @@@@@135-0329@@@@@, TWO DRAIN GPS
PAN GP-OIL
135-0330 PAN GP-OIL
135-0330 PAN GP-OIL
S/N 2WG5955-UP
32 LITER REVERSIBLE
FOR USE WITH @@@@@135-0339@@@@@, @@@@@135-0329@@@@@, TWO DRAIN GPS
PAN GP-OIL
175-3231 PAN GP-OIL
175-3231 PAN GP-OIL -ENGINE
28 LITER. FRONT SUMP
FOR USE WITH @@@@@135-0339@@@@@, @@@@@ 7C-2475@@@@@
AN ATTACHMENT
PAN GP-OIL
175-3232 PAN GP-OIL
175-3232 PAN GP-OIL -ENGINE
FRONT SUMP
PART OF 175-3231 PAN GP-OIL
AN ATTACHMENT
PAN GP-OIL
193-6996 PAN GP-OIL
193-6996 PAN GP-OIL -ENGINE
21 LITER, REAR SUMP
PART OF 193-6998 PAN GP-OIL
AN ATTACHMENT
PAN GP-OIL
193-6998 PAN GP-OIL
193-6998 PAN GP-OIL -ENGINE
21 LITER, REAR SUMP
AN ATTACHMENT
PAN GP-OIL
229-8856 PAN GP-OIL
229-8856 PAN GP-OIL -ENGINE
21 LITER STAMPED STEEL PAN WITH INTEGRAL SEAL
AN ATTACHMENT
PAN GP-OIL
4P-1723 PAN GP-OIL
4P-1723 PAN GP-OIL -ENGINE
S/N 2WG3126-UP
PAN GP-OIL
4W-0269 PAN GP-OIL
4W-0269 PAN GP-OIL -ENGINE
REQUIRES 4W2914 LINES GP-ENGINE OIL
ALSO AN ATTACHMENT
PAN GP-OIL
7C-2471 PAN GP-OIL
7C-2471 PAN GP-OIL
PAN GP-OIL
7C-6597 PAN GP-OIL
7C-6597 PAN GP-OIL
S/N 2WG1403-UP
FOR APPLICATIONS WHICH REQUIRE SHALLOW SUMP OIL PAN WITH LIMITED TILT ANGLE CAPABILITY
FOR USE WITH @@@@@ 7C-6519@@@@@
ALSO AN ATTACHMENT
PLUG GP-OIL PAN
7E-2313 PLUG GP-OIL PAN
7E-2313 PLUG GP-OIL PAN
S/N 2WG3126-UP
FOR USE WITH STAMPED STEEL OIL PAN, 21 LITER OIL PAN
PARTS GP-MISCELLANEOUS
173-5448 FASTENER GP-ENGINE
173-5448 FASTENER GP-ENGINE
FOR USE WITH ELECTRIC FUEL BOOST PUMPS
AN ATTACHMENT
173-6551 FASTENER GP-ENGINE
173-6551 FASTENER GP-ENGINE
FOR USE WITH FILTER GP-FUEL
AN ATTACHMENT
FASTENER GP-ENGINE
190-5148 FASTENER GP-ENGINE
190-5148 FASTENER GP-ENGINE
AN ATTACHMENT
FASTENER GP-ENGINE
4P-2983 FASTENER GP-ENGINE
4P-2983 FASTENER GP-ENGINE
FOR USE WITH ENGINE REQUIRING STUDS FOR MOUNTING CUSTOMER PROVIDED WIRING HARNESS
AN ATTACHMENT
196-9518 KIT-BASIC ENGINE REPAIR
196-9518 KIT-BASIC ENGINE REPAIR
S/N 2WG6468-UP
FIELD INSTALLATION
PISTON & ROD GP
PISTON & ROD GP
100-3694 PISTON & ROD GP
100-3694 PISTON & ROD GP
S/N 2WG2897-2914
16.7:1 RATIO
PISTON & ROD GP
107-7546 PISTON & ROD GP
107-7546 PISTON & ROD GP
S/N 2WG3585-4378
16.7:1 RATIO
PISTON & ROD GP
107-7639 PISTON & ROD GP
107-7639 PISTON & ROD GP
S/N 2WG3022-UP
16.7:1 RATIO
PISTON & ROD GP
107-7639 PISTON & ROD GP
107-7639 PISTON & ROD GP
16.7:1 RATIO
PISTON & ROD GP
108-5758 PISTON & ROD GP
108-5758 PISTON & ROD GP
S/N 2WG3930-UP
17.0:1 RATIO
PISTON & ROD GP
6I-4765 PISTON & ROD GP
6I-4765 PISTON & ROD GP
S/N 2WG2897-3584
16.7:1 RATIO
PISTON & ROD GP
7E-1300 PISTON & ROD GP
7E-1300 PISTON & ROD GP
15.5:1 RATIO
PISTON & ROD GP
7E-3579 PISTON & ROD GP
7E-3579 PISTON & ROD GP
S/N 2WG2939-UP
16.5:1 RATIO
PISTON & ROD GP
7E-3579 PISTON & ROD GP
7E-3579 PISTON & ROD GP
S/N 2WG2941-UP
16.5:1 RATIO
PISTON & ROD GP
9Y-5538 PISTON & ROD GP
9Y-5538 PISTON & ROD GP
S/N 2WG1-1087
15.5:1 RATIO
PISTON & ROD GP
9Y-8543 PISTON & ROD GP
9Y-8543 PISTON & ROD GP
S/N 2WG1040-UP
16:1 RATIO
RING GP-PISTON
7E-5213 RING GP-PISTON
7E-5213 RING GP-PISTON
FOR USE WITH 1.1L ENGINES BUILT WITH CHROME PLATED TOP RINGS ON THE PISTON
FIELD INSTALLATION
RING GP-PISTON
7E-5214 RING GP-PISTON
7E-5214 RING GP-PISTON
FOR USE WITH 1.1L ENGINES BUILT WITH PLASMA COATED TOP RINGS ON THE PISTON
FIELD INSTALLATION
POWER TAKE-OFF GP
POWER TAKE-OFF GP
2W-4901 POWER TAKE-OFF GP
2W-4901 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING & NO.306 PILOT BEARING
AN ATTACHMENT
POWER TAKE-OFF GP
3N-9098 POWER TAKE-OFF GP
3N-9098 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH SAE NO. 1 FLYWHEEL
AN ATTACHMENT
POWER TAKE-OFF GP
4P-3074 POWER TAKE-OFF GP
4P-3074 POWER TAKE-OFF GP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
POWER TAKE-OFF GP
4W-2651 POWER TAKE-OFF GP
4W-2651 POWER TAKE-OFF GP
REAR CLUTCH
FOR USE WITH SAE 2 FLYWHEEL HOUSING & #306 PILOT BRG. BORE
AN ATTACHMENT
POWER TAKE-OFF GP
6I-0415 POWER TAKE-OFF GP
6I-0415 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING
AN ATTACHMENT
PULLEY GP
DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
4P-5812 DAMPER & PULLEY GP
AN ATTACHMENT
DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
7C-2428 DAMPER & PULLEY GP
190 MM DIAMETER 3 GROOVES AND 250 MM DAMPER DIAMETER
DAMPER & PULLEY GP
7C-8445 DAMPER & PULLEY GP
7C-8445 DAMPER & PULLEY GP
304.8 MM DIAMETER SOLID DAMPER
ALSO AN ATTACHMENT
DAMPER & PULLEY GP
7E-9261 DAMPER & PULLEY GP
7E-9261 DAMPER & PULLEY GP
264 MM (10.4 IN) OD PULLEY 3 GROOVES AND 250 MM DAMPER DIAMETER
AN ATTACHMENT
PULLEY
7C-5567 PULLEY
7C-5567 PULLEY -ALTERNATOR
87.38MM OD, 17.025MM ID
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
4P-4452 PULLEY GP-CRANKSHAFT
4P-4452 PULLEY GP-CRANKSHAFT
S/N 2WG3126-6699
PROVIDES A 7 GROOVE POLY-V PULLEY & ONE V-GROOVE PULLEY
FOR USE WITH @@@@@ 4P-4451@@@@@, VISCOUS DAMPER & RUBBER DAMPER
ALSO AN ATTACHMENT
PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
4W-5429 PULLEY GP-CRANKSHAFT
PULLEY GP-CRANKSHAFT
7E-1618 PULLEY GP-CRANKSHAFT
7E-1618 PULLEY GP-CRANKSHAFT
FOR USE WITH 99 MM LONG FAN ADAPTER ON STATIONARY FAN DRIVE & ENGINE MOUNTED RADIATOR
CANNOT BE USED WITH FAN DRIVE & BASE
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
7E-1619 PULLEY GP-CRANKSHAFT
7E-1619 PULLEY GP-CRANKSHAFT
FOR USE WITH 99 MM LONG FAN ADAPTER ON STATIONARY FAN DRIVE AND ENGINE MOUNTED RADIATOR
CANNOT BE USED WITH FAN DRIVE & BASE
AN ATTACHMENT
PULLEY GP-FAN DRIVE
107-3263 PULLEY GP-FAN DRIVE
107-3263 PULLEY GP-FAN DRIVE
DRIVES THE FAN 0.66 ENGINE SPEED WITH A 190 OD CRANKSHAFT PULLEY
AN ATTACHMENT
PULLEY GP-FAN DRIVE
9Y-0757 PULLEY GP-FAN DRIVE
9Y-0757 PULLEY GP-FAN DRIVE
S/N 2WG1361-UP
DRIVES THE FAN .95 ENGINE SPEED WITH 190 DIAMETER CRANKSHAFT PULLEY
ALSO AN ATTACHMENT
PULLEY GP-FAN DRIVE
9Y-0758 PULLEY GP-FAN DRIVE
9Y-0758 PULLEY GP-FAN DRIVE
DRIVES FAN .826 ENGINE SPEED WITH A 190 DIAMETER CRANKSHAFT PULLEY
AN ATTACHMENT
PULLEY-ALTERNATOR
7C-2370 PULLEY-ALTERNATOR
7C-2370 PULLEY-ALTERNATOR
114.08MM OD,22.22MM ID
AN ATTACHMENT
PULLEY-ALTERNATOR
7C-3729 PULLEY-ALTERNATOR
7C-3729 PULLEY-ALTERNATOR
PART OF 102-4049 ALTERNATOR GP-CHARGING
FOR USE WITH @@@@@ 7C-1683@@@@@
AN ATTACHMENT
PULLEY-ALTERNATOR
7C-3938 PULLEY-ALTERNATOR
7C-3938 PULLEY-ALTERNATOR
108.5MM OD PULLEY, 22.238MM ID BORE. 2 GROOVE
FOR USE WITH CUSTOMER SUPPLIED ALTERNATOR
AN ATTACHMENT
PULLEY-ALTERNATOR
9Y-4056 PULLEY-ALTERNATOR
9Y-4056 PULLEY-ALTERNATOR
94.98MM OD, 22.238MM ID
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
9Y-4550 SHAFT GP-STUB
9Y-4550 SHAFT GP-STUB -REAR
FOR USE WITH 9Y-0574 FLYWHEEL GP, SAE NO. 2 FLYWHEEL HOUSING &, & FOR APPLICATIONS REQUIRING 69.82 MM (2.74 IN) DIAMETER STUB SHAFT
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
7E-5128 GUARD GP-BELT
7E-5128 GUARD GP-BELT
EXTENDED
AN ATTACHMENT
GUARD GP-BELT
7E-5132 GUARD GP-BELT
7E-5132 GUARD GP-BELT
NON-EXTENDED
AN ATTACHMENT
GUARD GP-BELT
7E-5824 GUARD GP-BELT
7E-5824 GUARD GP-BELT
FOR USE WITH @@@@@ 7T-2095@@@@@, BASE MOUNTED RADIATOR
ALSO AN ATTACHMENT
GUARD GP-BELT
7E-5825 GUARD GP-BELT
7E-5825 GUARD GP-BELT
FOR USE WITH BASE MOUNTED RADIATOR & FRONT SUPPORT
ALSO AN ATTACHMENT
GUARD GP-BELT
7E-5826 GUARD GP-BELT
7E-5826 GUARD GP-BELT
FOR USE WITH BASE MOUNTED RADIATOR & FRONT SUPPORT
ALSO AN ATTACHMENT
GUARD GP-BELT
9Y-5234 GUARD GP-BELT
9Y-5234 GUARD GP-BELT
FOR USE WITH CRITICAL SILENCER & INDUSTRIAL SILENCER
CANNOT BE USED WITH ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
9Y-6144 GUARD GP-BELT
9Y-6144 GUARD GP-BELT
FOR USE WITH @@@@@ 7T-2095@@@@@
AN ATTACHMENT
GUARD GP-BELT
9Y-6453 GUARD GP-BELT
9Y-6453 GUARD GP-BELT
FOR USE WITH @@@@@ 9Y-5323@@@@@, RADIATOR SUPPORT AND BASE
AN ATTACHMENT
1N-4635 V-BELT GP
1N-4635 V-BELT GP
991 MM (39 IN) LG
AN ATTACHMENT
4M-6291 V-BELT GP
4M-6291 V-BELT GP
1054 MM (41 IN) LG
AN ATTACHMENT
8N-3504 V-BELT GP
8N-3504 V-BELT GP
1003 MM (39.5 IN) LG
AN ATTACHMENT
068-8546 V-BELT SET
068-8546 V-BELT SET
1600 MM (63 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
1S-1187 V-BELT SET
1S-1187 V-BELT SET
1727 MM (68 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
1S-1208 V-BELT SET
1S-1208 V-BELT SET
1803 MM (71 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
1S-4700 V-BELT SET
1S-4700 V-BELT SET
1664 MM (65.5 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
1S-4760 V-BELT SET
1S-4760 V-BELT SET
1842 MM (72.5 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
2N-2297 V-BELT SET
2N-2297 V-BELT SET
1499 MM (50 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
2S-2481 V-BELT SET
2S-2481 V-BELT SET
1778 MM (70 IN) LG. INCLUDES 2 BELTS
AN ATTACHMENT
2S-9779 V-BELT SET
2S-9779 V-BELT SET
1486 MM (58.5 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
3S-9653 V-BELT SET
3S-9653 V-BELT SET
1727 MM (68 IN) LG. INCLUDES 2 BELTS
AN ATTACHMENT
4N-8771 V-BELT SET
4N-8771 V-BELT SET -FAN
1359 MM (53.5 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
4W-6025 V-BELT SET
4W-6025 V-BELT SET
1460 MM (57.48 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
4W-8655 V-BELT SET
4W-8655 V-BELT SET
1740 MM (68.5 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
4W-8729 V-BELT SET
4W-8729 V-BELT SET
1689 MM (66.5) LG-INCLUDES 2 BELTS
AN ATTACHMENT
5N-6098 V-BELT SET
5N-6098 V-BELT SET
1486 MM (58.5IN) LONG. INCLUDES 3 BELTS
AN ATTACHMENT
5N-9303 V-BELT SET
5N-9303 V-BELT SET
1422 MM (56 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
6L-6557 V-BELT SET
6L-6557 V-BELT SET
1829 MM (72 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
6N-3843 V-BELT SET
6N-3843 V-BELT SET
1918 MM (75.5 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
8M-8340 V-BELT SET
8M-8340 V-BELT SET
1626MM (64 IN) LONG, INCLUDES 2 BELTS
AN ATTACHMENT
8M-8341 V-BELT SET
8M-8341 V-BELT SET
1575 MM (62 IN ) LG-INCLUDES 2 BELTS
AN ATTACHMENT
8S-5154 V-BELT SET
8S-5154 V-BELT SET
1651 MM (65 IN) LG-INCLUDES 2 BELTS
FOR USE WITH @@@@@102-4049@@@@@, @@@@@ 9Y-0757@@@@@, @@@@@ 7E-9261@@@@@
CANNOT BE USED WITH @@@@@ 7E-3257@@@@@, @@@@@ 7E-1479@@@@@
AN ATTACHMENT
9L-1106 V-BELT SET
9L-1106 V-BELT SET
1524 MM (60 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
9L-1127 V-BELT SET
9L-1127 V-BELT SET
1448 MM (57 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
9L-1129 V-BELT SET
9L-1129 V-BELT SET
1702 MM (67 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
9L-1557 V-BELT SET
9L-1557 V-BELT SET
1397 MM (55 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
9L-6646 V-BELT SET
9L-6646 V-BELT SET
1588 MM (62.5 IN) LG-INCLUDES 2 BELTS
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
S/N 2WG3126-6699
FOR USE WITH @@@@@ 4P-0564@@@@@
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
S/N 2WG1403-4097
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
S/N 2WG4098-UP
ALSO AN ATTACHMENT
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
S/N 2WG1335-3824
MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
4P-4372 MECHANISM GP-FUEL PUMP & VALVE
S/N 2WG3022-UP
ROCKER ARM GP
107-7722 ROCKER ARM GP
107-7722 ROCKER ARM GP
S/N 2WG3825-6699
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
7C-6077 ROCKER ARM GP
7C-6077 ROCKER ARM GP
S/N 2WG1-766
PART OF 2W-9607 VALVE MECHANISM GP
ROCKER ARM GP
7C-6077 ROCKER ARM GP
7C-6077 ROCKER ARM GP
S/N 2WG767-1822
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE, 2W-9607 VALVE MECHANISM GP
ROCKER ARM GP
7C-6077 ROCKER ARM GP
7C-6077 ROCKER ARM GP
S/N 2WG1823-3825
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE
VALVE MECHANISM GP
2W-9607 VALVE MECHANISM GP
2W-9607 VALVE MECHANISM GP
S/N 2WG1-1822

Information:

(For parts list, see above)

Specifications
Engine to Transmission Adapter
3114, 3116, 3126 Engines
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
Repair Guidelines for Air Compressors {1803}
2003/09/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT
Disassembly and Assembly
Air Compressor Drive Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Air Compressor - Remove and Install
3114, 3116 and 3126 Engines
Air Compressor Drive Gear - Install
3114, 3116 and 3126 Engines
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
Balancer Group - 3114 Engine Only
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Engine Balancer Shaft - Remove and Install
3114, 3116 and 3126 Engines
Specifications
Belt Tension Chart
3114, 3116, 3126 Engines
Belt Tensioner
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Belt Tensioner
3114, 3116, 3126 Engines
Disassembly and Assembly
Belt Tensioner - Remove and Install
3114, 3116 and 3126 Engines
Belt Tightener - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Belt Tightener - Install
3114, 3116 and 3126 Engines
Engine News
New 8T2998 Lubricant Available
1986/03/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/01/01
Specifications
Camshaft
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116 and 3126 Engines
Camshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft - Remove
3114, 3116 and 3126 Engines
Camshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/01/06
Specifications
Rear Seal Carrier - If Equipped
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Rear Seal Carrier
3114, 3116, 3126 Engines
Disassembly and Assembly
Crankshaft Rear Seal Carrier - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
Operation and Maintenance Manual
Engaging the Driven Equipment
3114, 3116, and 3126 Industrial and Generator Set Engines
Service Letter-NACD
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Operation and Maintenance Manual
Engaging the Driven Equipment
3114, 3116, and 3126 Industrial and Generator Set Engines
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
New Rear Crankshaft Seal Groups Available {1161}
1994/10/01
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01
There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/09/01
Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
3114, 3116, 3126 Engines
Crankshaft Seals
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod Bearing Journal
3114, 3116, 3126 Engines
Main Bearing Journal
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116 and 3126 Engines
Crankshaft Front Seal - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3114, 3116 and 3126 Engines
Crankshaft Rear Seal - Remove
3114, 3116 and 3126 Engines
Crankshaft Rear Seal - Install
3114, 3116 and 3126 Engines
Crankshaft Wear Sleeve (Rear) - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Wear Sleeve (Rear) - Remove - If Equipped
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116 and 3126 Engines
Crankshaft - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2013/04/22
There Is a New Maximum Temperature for 2W-8147 Gear {1204}
2003/08/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/10/01
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning {0672,0673,1201}
1994/09/01
New Design Of Cylinder Block And Main Bearings{1201,1203,1224}
1999/05/01
New Main Bearing Material {1203}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston Cooling Jet
3114, 3116, 3126 Engines
Cylinder Block Cover Group
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearing Journal
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116 and 3126 Engines
Piston Cooling Jets - Remove and Install
3114, 3116 and 3126 Engines
Camshaft Bearings - Remove and Install
3114, 3116 and 3126 Engines
Crankshaft Main Bearings - Remove
3114, 3116 and 3126 Engines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
Oversize Pistons Not Available{1214,1216}
1993/04/05
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves
1989/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/10/01
New 9U6101 Lower Pilot Reamer Group Available
1993/02/01
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Injector Sleeve Inspection On Certain 3116 And 3126 Industrial Marine Engines
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Correct Machining Of The 130-9004 Intake Valve Seat Insert
Specifications
Cylinder Head Valves
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Cylinder Head
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3114, 3116 and 3126 Engines
Cylinder Head - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Cylinder Head - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3114, 3116 and 3126 Engines
Unit Injector Sleeve - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3114, 3116 and 3126 Engines
Inlet and Exhaust Valve Guides - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves {1105,1108}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
New Valve Cover Gasket Used {1107}
1994/01/17
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correct Procedures for Installing, Reaming and Coining Copper Sleeves {1100, 1101, 1713}
2008/04/07
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3114, 3116, and 3126 Industrial and Generator Set Engines
Specifications
Vibration Damper and Pulley
3114, 3116, 3126 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3114, 3116, and 3126 Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Accessory Drive - Splined
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Operation and Maintenance Manual
Fan Drive Bearing - Lubricate - If Equipped
3114, 3116, and 3126 Industrial and Generator Set Engines
Specifications
Fan Drive
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT
Fan Drive
3114, 3116, 3126 Engines
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
New Locking Bolt Used In Flywheel Groups
1991/10/01
Specifications
Engine to Transmission Adapter
3114, 3116, 3126 Engines
Flywheel
3114, 3116, 3126 Engines
Flywheel Housing
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Flywheel and Flywheel Housing Runout
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Flywheel - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Flywheel - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New Locking Bolt Used In Flywheel Groups{1156}
1991/10/14
Engine News
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3114, 3116, and 3126 Engines
Disassembly and Assembly
Gear Group (Front) - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3114, 3116 and 3126 Engines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Engine News
New Rear Crankshaft Seal Groups Available {1161}
1994/10/01
Specifications
Flywheel Housing
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Flywheel and Flywheel Housing Runout
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Testing and Adjusting
Flywheel Housing - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
3114, 3116 and 3126 Engines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01
Specifications
Crankshaft Seals
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Front Housing and Covers
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove
3114, 3116 and 3126 Engines
Housing (Front) - Install
3114, 3116 and 3126 Engines
Housing (Front) - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Front Cover - Install
3114, 3116 and 3126 Engines
Service Magazine
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Engine News
New Engine Lifting Bracket Available
1988/06/01
Operation and Maintenance Manual
Engine Lifting
3114, 3116, and 3126 Industrial and Generator Set Engines
Disassembly and Assembly
Engine Lifting Bracket - Remove and Install
3114, 3116 and 3126 Engines
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Oversize Pistons Not Available
1993/04/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Operation and Maintenance Manual
Overhaul Considerations
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Hand Tool List For 3114 And 3116 Engines{0600,0701}
1989/10/23
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Latching Fuel Solenoid Assemblies{1259}
1990/09/03
Serviced Parts Available For 8C4773 Electric Starting Motor Group{1453}
1990/10/08
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
New Locking Bolt Used In Flywheel Groups{1156}
1991/10/14
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
Oversize Pistons Not Available{1214,1216}
1993/04/05
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Improved Alternator Groups Now Available{1405}
1998/05/04
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Operation and Maintenance Manual
Engine Mounts - Inspect
3114, 3116, and 3126 Industrial and Generator Set Engines
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Service Magazine
Serviced Parts Available For 8C4773 Electric Starting Motor Group{1453}
1990/10/08
Engine News
Oil Capacity Increased
1992/02/01
The Oil Pan No Longer Requires Gasket Sealant {1302}
2001/10/01
The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/09/01
New Oil Pan and Integral Seal {1302, 1302, 1302}
2003/10/01
Technical Information Bulletin
7X-2521 Gasket Kit Includes New Oil Pan Gasket
7X-2521 Gasket Kit Includes New Oil Pan Gasket
Disassembly and Assembly
Engine Oil Pan - Remove and Install
3114, 3116 and 3126 Engines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Oil Capacity Increased{1302,1326}
1992/02/03
The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/07/21
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Oversize Pistons Not Available
1993/04/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Piston Usage Chart For Two Piece Pistons{1214}
1995/08/01
New Top Piston Rings Available {1215}
1999/03/01
New Fractured Connecting Rod Has Been Released {1218}
2003/07/01
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston Cooling Jet
3114, 3116, 3126 Engines
Connecting Rod
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston and Rings
3114, 3116, 3126 Engines
Connecting Rod Bearing Journal
3114, 3116, 3126 Engines
Connecting Rod
3114, 3116, 3126 Engines
Connecting Rod
3114, 3116, 3126 Engines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116, and 3126 Engines
Compression - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Connecting Rod Bearings - Inspect
3114, 3116, and 3126 Engines
Piston Ring Groove - Inspect
3114, 3116, and 3126 Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Mechanical Noise (Knock) in Engine
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116 and 3126 Engines
Piston Cooling Jets - Remove and Install
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Remove
3114, 3116 and 3126 Engines
Pistons and Connecting Rods - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Oversize Pistons Not Available{1214,1216}
1993/04/05
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Top Piston Rings Available {1215}
1999/03/15
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
2004/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Low Coolant Level Plate In Radiator May Cause False Coolant Level Readings {1353}
1994/01/17
Operation and Maintenance Manual
Engaging the Driven Equipment
3114, 3116, and 3126 Industrial and Generator Set Engines
Service Letter-NACD
Remove All 1K2811 Collar Assemblies Without The &quot;F&quot; Identifier Casted On The Part
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Rear Power Take-Off (RPTO)
3114, 3116, 3126 Engines
Service Letter-China
Remove All 1K2811 Collar Assemblies Without The &quot;F&quot; Identifier Casted On The Part
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Service Letter-Asia
Service Letter-APD
Service Magazine
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22
Engine News
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Crankshaft Pulley
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Vibration Damper and Pulley
3114, 3116, 3126 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Specifications
Rear Stub Shaft
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT
Engine News
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
Separate Valve Stem Gauges Available
1982/08/25
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
New 9U6101 Lower Pilot Reamer Group Available
1993/02/01
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Hand Tool List For 3114 And 3116 Engines{0600,0701}
1989/10/23
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}
1997/01/27
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2013/04/22
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
3114, 3116, 3126 Engines
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem &quot;Use Again&quot; Specifications
1983/03/16
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves
1989/05/01
New Fuel Setting Screw Cover And Bolt
1990/07/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Modification Of 1U7791 Valve Seat Driver
1990/11/01
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/10/01
New Valve Cover Gasket Used{1107}
1994/01/01
New Valve Cover Gasket {1107}
1996/01/17
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/16
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/16
New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3114, 3116, and 3126 Industrial and Generator Set Engines
Fuel Injection Timing - Check
3114, 3116, and 3126 Industrial and Generator Set Engines
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Unit Injector Mechanism
3114, 3116, 3126 Engines
Valve Rocker Arms and Lifters
3114, 3116, 3126 Engines
Valve Mechanism Cover
3114, 3116, 3126 Engines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck Engines; 3116 Industrial Engines; And 3116 Marine Engines
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Engine Valve Lash - Inspect/Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Excessive Valve Lash
3114, 3116 and 3126 Engines
Little or No Valve Lash
3114, 3116 and 3126 Engines
Valve Train Noise
3114, 3116 and 3126 Engines
Disassembly and Assembly
Rocker Shaft and Pushrod - Remove
3114, 3116 and 3126 Engines
Rocker Shaft and Pushrod - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
3114, 3116 and 3126 Engines
Rocker Shaft - Assemble
3114, 3116 and 3126 Engines
Lifter Group - Remove and Install
3114, 3116 and 3126 Engines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Modification Of 1U7791 Valve Seat Driver{0782,1103}
1990/10/29
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
New 9U6101 Lower Pilot Reamer Group Available{0670,1125}
1993/02/01
New Valve Cover Gasket Used {1107}
1994/01/17
New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}
1998/05/11
Use 146-2597 Rocker Arm Bearing Installation Tool To Hold Push Rods In Place {1208}
1998/08/17
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QU&#201;BEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.