AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-2650 CLUTCH GP PART OF 4W-2651 POWER TAKE-OFF GP AN ATTACHMENT 3116 ENGINE - MACHINE


BASIC ENGINE
CLUTCH GP
CYLINDER BLOCK GP

ENGINE - MACHINE 3116 ENGINE - MACHINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (2018)

BASIC ENGINE

CLUTCH GP
CLUTCH AS
5N-3789 CLUTCH AS
CLUTCH GP
2W-4900 CLUTCH GP
CLUTCH GP
3N-9097 CLUTCH GP
CLUTCH GP
4P-2270 CLUTCH GP
CLUTCH GP
4P-3073 CLUTCH GP
CLUTCH GP
4W-2650 CLUTCH GP
 

#SEBP17970050
 

4W-2650: CLUTCH GP

4W-2650 CLUTCH GP
PART OF 4W-2651 POWER TAKE-OFF GP
AN ATTACHMENT
i00378753 SEBP1797
4W2650 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-9315 [1] RING-DRIVE (72-TEETH)  
2. 6L-3966 [3] PIN  
  6L-3964 [3] PIN-COTTER  
  5D-2751 [6] WASHER-SPRING (0.406X0.687X0.125-IN THK)  
3. 2L-8262 [1] RING-ADJUSTMENT  
4. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
  108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
5. 4W-2652 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
7. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
8. 4B-4775 [1] HOSE AS  
9. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  3F-9556 [1] LOCKWASHER  
10. 7L-0116 [1] LOCK  
11. 5B-6159 [1] SETSCREW-POINT  
12. 5L-4202 [1] HOUSING-CLUTCH  
13. 6B-3224 [2] CUP-BEARING (TAPERED ROLLER)  
14. 4B-7255 [2] CONE-BEARING  
15. 4W-2649 [1] SHAFT-CLUTCH  
16. 2L-8259 [3] LEVER  
17. 1L-9087 [1] KEY  
18. 492-3073 [1] WASHER-LOCK  
19. 2L-8260 [1] SLEEVE-SLIDING  
20. 2N-9363 [1] RETAINER-BEARING  
21. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
22. 4B-4715 [1] COLLAR AS  
  0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4722 B [2] SHIM  
23. 6L-5151 [2] KEY-WOODRUFF  
24. 4B-4756 [1] SHAFT  
25. 4B-4725 [1] YOKE  
26. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  9F-5644 [2] LOCKWASHER  
27. 6L-3965 [6] PIN  
  6L-3960 [6] PIN-COTTER  
28. 5B-5251 [6] LINK  
29. 3N-7953 [1] PLATE AS  
  3N-7954 [1] LOCK PIN  
  3N-7955 [1] SPRING  
30. 3N-7952 [1] PLATE-DRIVE  
31. 2L-8256 [1] PLATE-HUB & BACK  
32. 2L-8257 [1] NUT-HUB  
   
    AVAILABLE REPAIR KIT(S):
  5N-3789 Y [1] CLUTCH AS  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970051
 

4P-0564: COVER GP-CYLINDER BLOCK

4P-0564 COVER GP-CYLINDER BLOCK
S/N 2WG3126-6699
FOR USE WITH AIR COMPRESSOR
ALSO AN ATTACHMENT
i00157858 SEBP1797
4P0564 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2099 M [6] STUD (M8X1.25X52.75-MM)  
2. 2W-6544 [1] COVER  
3. 4P-5153 [1] MANIFOLD-OIL  
4. 4Y-9652 [3] GASKET  
5. 7E-7515 [1] COVER  
6. 7W-3872 [6] SLEEVE  
8. 110-7618 [4] BOLT AS  
9. 134-4640 [1] SPACER (9X15X15-MM THK)  
10. 342-4977 [3] COVER-SIDE  
11. 4F-9029 [1] SEAL  
12. 4F-9653 [1] SEAL-O-RING  
13. 5M-6213 [4] PLUG-PIPE (1/4-18-THD)  
14. 6V-2317 M [16] BOLT (M8X1.25X30-MM)  
15. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
16. 8T-1159 M [2] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
17. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
18. 9M-1974 [16] WASHER-HARD (8.8X16X2-MM THK)  
19. 6V-2317 BM [1] BOLT (M8X1.25X30-MM)  
20. 9M-1974 B [1] WASHER-HARD (8.8X16X2-MM THK)  
21. 517-0553 [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17970052
 

4P-4701: COVER GP-CYLINDER BLOCK

4P-4701 COVER GP-CYLINDER BLOCK
S/N 2WG1403-UP
ALSO AN ATTACHMENT
i00376478 SEBP1797
4P4701 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6544 [1] COVER  
2. 4P-5153 [1] MANIFOLD-OIL  
3. 4Y-9652 [3] GASKET  
4. 7W-3872 [6] SLEEVE  
5. 9Y-0747 [1] MANIFOLD-OIL  
6. 110-7618 [4] BOLT AS  
7. 342-4977 [3] COVER-SIDE  
9. 3J-1907 [3] SEAL-O-RING  
10. 4F-9029 [1] SEAL  
11. 4F-9653 [1] SEAL-O-RING  
12. 5M-6213 [4] PLUG-PIPE (1/4-18-THD)  
13. 6V-2317 M [18] BOLT (M8X1.25X30-MM)  
14. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
15. 6V-5842 M [2] BOLT (M10X1.5X40-MM)  
16. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
17. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
18. 9M-1974 [18] WASHER-HARD (8.8X16X2-MM THK)  
19. 9S-4191 [3] PLUG (9/16-18-THD)  
20. 9X-2099 M [6] STUD (M8X1.25X52.75-MM)(MARKED Z)  
21. 3J-7354 B [1] SEAL-O-RING  
22. 9S-4182 B [1] PLUG (7/16-20-THD)  
23. 1U-8846 B SEALANT-GASKET (2ML)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17970053
 

4P-5107: COVER GP-CYLINDER BLOCK

4P-5107 COVER GP-CYLINDER BLOCK
S/N 2WG3930-4574
i00383959 SEBP1797
4P5107 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [12] BOLT (M8X1.25X30-MM)  
2. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-3872 [6] SLEEVE  
4. 7W-3871 [1] COVER-SIDE  
5. 7W-9699 [3] GASKET  
6. 7W-9395 [2] COVER-SIDE  
7. 110-7618 [4] BOLT AS  
8. 2W-6544 [1] COVER  
  1U-8846 SEALANT-GASKET  
9. 7E-7515 [1] COVER  
10. 8T-1159 M [2] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
  3V-2431 [2] WASHER (10.2X16X2-MM THK)(16MM OD)  
11. 4F-9653 [1] SEAL-O-RING  
12. 8T-6765 [3] PLUG-PIPE (1/4-18-THD)  
13. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
14. 4F-9029 [1] SEAL  
15. 4P-5153 [1] MANIFOLD-OIL  
16. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
17. 6V-5217 M [11] BOLT (M8X1.25X20-MM)  
18. 9M-1974 [27] WASHER-HARD (8.8X16X2-MM THK)  
19. 6V-3940 M [4] BOLT (M8X1.25X25-MM)  
20. 7C-2177 [2] COVER  
21. 7C-0358 [2] GASKET  
  M   METRIC PART
 

#SEBP17970054
 

4P-5107: COVER GP-CYLINDER BLOCK

4P-5107 COVER GP-CYLINDER BLOCK
S/N 2WG4575-UP
i00383961 SEBP1797
4P5107 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [12] BOLT (M8X1.25X30-MM)  
2. 7C-0358 [2] GASKET  
3. 7W-3872 [6] SLEEVE (LOCATION X)  
4. 7W-3871 [1] COVER-SIDE  
5. 4Y-9652 [3] GASKET  
6. 7W-9395 [2] COVER-SIDE  
7. 110-7618 [4] BOLT AS  
8. 2W-6544 [1] COVER  
  1U-8846 B SEALANT-GASKET  
9. 7E-7515 [1] COVER  
10. 8T-1159 M [2] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
  3V-2431 [2] WASHER (10.2X16X2-MM THK)(16MM OD)  
11. 4F-9653 [1] SEAL-O-RING  
12. 8T-6765 C [1] PLUG-PIPE (1/4-18-THD)  
13. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
14. 4F-9029 [1] SEAL  
15. 113-6280 C [1] MANIFOLD-CYLINDER BLOCK  
16. 6V-5219 CM [2] BOLT (M8X1.25X40-MM)  
17. 6V-5217 M [11] BOLT (M8X1.25X20-MM)  
18. 9M-1974 [27] WASHER-HARD (8.8X16X2-MM THK)  
19. 6V-3940 M [4] BOLT (M8X1.25X25-MM)  
20. 7C-2177 [2] COVER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP17970055
 

4W-2108: COVER GP-CYLINDER BLOCK

4W-2108 COVER GP-CYLINDER BLOCK
AN ATTACHMENT
i00378364 SEBP1797
4W2108 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 342-4977 [3] COVER-SIDE  
2. 6V-2317 M [20] BOLT (M8X1.25X30-MM)  
3. 9M-1974 [20] WASHER-HARD (8.8X16X2-MM THK)  
4. 2W-6544 [1] COVER  
5. 517-0553 [1] GASKET  
7. 4Y-9652 [3] GASKET  
8. 7W-3872 [6] SLEEVE  
9. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
10. 6V-5842 M [2] BOLT (M10X1.5X40-MM)  
11. 9S-4191 [3] PLUG (9/16-18-THD)  
12. 3J-1907 [3] SEAL-O-RING  
13. 4F-9653 [1] SEAL-O-RING  
14. 9Y-0747 [1] MANIFOLD-OIL  
15. 6V-2317 BM [1] BOLT (M8X1.25X30-MM)  
16. 9M-1974 B [1] WASHER-HARD (8.8X16X2-MM THK)  
17. 9X-2099 BM [1] STUD (M8X1.25X52.75-MM)  
18. 8T-4224 B [1] WASHER-HARD (8.8X16X2-MM THK)  
19. 110-7618 [4] BOLT AS  
20. 9X-2099 BM [1] STUD (M8X1.25X52.75-MM)  
21. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
22. 134-4640 [1] SPACER (9X15X15-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17970056
 

7C-0299: COVER GP-CYLINDER BLOCK

7C-0299 COVER GP-CYLINDER BLOCK
S/N 2WG385-UP
i00122239 SEBP1797
7C0299 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [18] BOLT (M8X1.25X30-MM)  
2. 9M-1974 [21] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-3872 [6] SLEEVE (MARKED X)  
4. 342-4977 [2] COVER-SIDE  
5. 4Y-9652 [3] GASKET  
6. 7W-9395 [1] COVER-SIDE  
7. 6V-5217 M [3] BOLT (M8X1.25X20-MM)  
8. 2W-6544 [1] COVER  
9. 9S-4191 C [3] PLUG (9/16-18-THD)  
10. 3J-1907 C [3] SEAL-O-RING  
11. 4F-9653 [1] SEAL-O-RING  
12. 9Y-0747 C [1] MANIFOLD-OIL  
13. 6V-5842 CM [2] BOLT (M10X1.5X40-MM)  
14. 6V-5839 C [2] WASHER (11X21X2.5-MM THK)  
15. 110-7618 [4] BOLT AS  
16. 517-0553 B [1] GASKET  
17. 9X-2099 M [2] STUD (M8X1.25X52.75-MM)  
18. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 039-2281 [1] SPACER (9X16X25-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP17970057
 

7C-0299: COVER GP-CYLINDER BLOCK

7C-0299 COVER GP-CYLINDER BLOCK
S/N 2WG1-4807
i00397002 SEBP1797
7C0299 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [11] BOLT (M8X1.25X30-MM)  
2. 9M-1974 [26] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-3872 [6] SLEEVE  
4. 7W-3871 [2] COVER-SIDE  
5. 7W-9699 [3] GASKET  
6. 7W-9395 [1] COVER-SIDE  
7. 6V-5217 M [15] BOLT (M8X1.25X20-MM)  
8. 2W-6544 [1] COVER  
  7W-2426 [1] GASKET  
9. 6V-7726 M [2] SCREW-HEX SOCKET (M10X1.5X25-MM)  
10. 4W-8339 [1] COVER  
11. 4F-9653 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP17970058
 

7E-2986: COVER GP-CYLINDER BLOCK

7E-2986 COVER GP-CYLINDER BLOCK
FOR USE WHEN LARGE HYDRAULIC PUMPS ARE MOUNTED ON ENGINE.
Type 1
CANNOT BE USED WITH OIL PRESSURE CONTACTOR
AN ATTACHMENT
i00401775 SEBP1797
7E2986 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [11] BOLT (M8X1.25X30-MM)  
2. 9M-1974 [23] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-3872 [6] SLEEVE (MARKED X)  
4. 7W-3871 [2] COVER-SIDE  
5. 7W-9699 [3] GASKET  
6. 7W-9395 [1] COVER-SIDE  
7. 6V-5217 M [12] BOLT (M8X1.25X20-MM)  
8. 2W-6544 [1] COVER  
  1U-8846 SEALANT-GASKET  
9. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
10. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
11. 4F-9653 [1] SEAL-O-RING  
12. 4W-8339 [1] COVER  
13. 110-7618 [4] BOLT AS  
  M   METRIC PART
 

#SEBP17970059
 

7E-2986: COVER GP-CYLINDER BLOCK

7E-2986 COVER GP-CYLINDER BLOCK
FOR USE WHEN LARGE HYDRAULIC PUMPS ARE MOUNTED ON ENGINE.
Type 2
CANNOT BE USED WITH OIL PRESSURE CONTACTOR
AN ATTACHMENT
i01045533 SEBP1797
7E2986 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [11] BOLT (M8X1.25X30-MM)  
2. 9M-1974 [21] WASHER-HARD (8.8X16X2-MM THK)  
3. 7W-3872 [6] SLEEVE (MARKED X)  
4. 7W-3871 [2] COVER-SIDE  
5. 4Y-9652 [3] GASKET  
6. 7W-9395 [1] COVER-SIDE  
7. 6V-5217 M [10] BOLT (M8X1.25X20-MM)  
8. 2W-6544 [1] COVER  
  1U-8846 B SEALANT-GASKET (2 ML)  
9. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
10. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
11. 4F-9653 [1] SEAL-O-RING  
12. 4W-8339 [1] COVER  
13. 110-7618 [4] BOLT AS  
14. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 9X-2097 M [1] STUD (M8X1.25-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Engaging the Driven Equipment
3114, 3116, and 3126 Industrial and Generator Set Engines
Service Letter-NACD
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Remove All 1K2811 Collar Assemblies Without The "F" Identifier Casted On The Part
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22

Caterpillar Parts SIS Catalog 3116 :

CLUTCH GP
4P-3073 CLUTCH GP
CLUTCH GP
4P-2270 CLUTCH GP
CLUTCH GP
3N-9097 CLUTCH GP
CLUTCH GP
2W-4900 CLUTCH GP
CLUTCH AS
5N-3789 CLUTCH AS
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CAMSHAFT GP
2W-9608 CAMSHAFT GP
CAMSHAFT GP
100-4966 CAMSHAFT GP
COVER GP-CYLINDER BLOCK
4P-0564 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4P-4701 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4P-5107 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4P-5107 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
4W-2108 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.