AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

100-4948 CYLINDER BLOCK GP S/N 2WG5280-6039 PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP 3116 ENGINE - MACHINE


BASIC ENGINE
CYLINDER BLOCK GP

ENGINE - MACHINE 3116 ENGINE - MACHINE 2WG
 3116 Industrial Engine 2WG00001-UP SEBP1797 3116 2WG   (2018)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7E-2986 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
 

#SEBP17970070
 

100-4948: CYLINDER BLOCK GP

100-4948 CYLINDER BLOCK GP
S/N 2WG5280-6039
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
i00122924 SEBP1797
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6289 [1] CYLINDER BLOCK AS  
1A. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
1B. 9X-8916 M [14] BOLT (M16X2X140-MM)  
1C. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
2. 2M-9780 [1] SEAL-O-RING  
3. 2W-7211 [1] BUSHING (CAMSHAFT)  
4. 2M-6471 [2] PLUG-CUP  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17970071
 

129-1095: CYLINDER BLOCK GP

129-1095 CYLINDER BLOCK GP
S/N 2WG6040-6468
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
i00089963 SEBP1797
1291095 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17970072
 

149-5403: CYLINDER BLOCK GP

149-5403 CYLINDER BLOCK GP
S/N 2WG6469-UP
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
i00907540 SEBP1797
1495403 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5402 [1] CYLINDER BLOCK AS  
1A. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
1B. 9X-8916 M [14] BOLT (M16X2X140-MM)  
1C. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
2. 9S-8005 [1] PLUG (3/4-16-THD)  
3. 3K-0360 [1] SEAL-O-RING  
4. 2W-7213 [6] BUSHING (CAMSHAFT)  
5. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
7. 2M-6471 [2] PLUG-CUP  
8. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
9. 3D-2824 B [2] SEAL-O-RING  
10. 3H-5552 [1] PLUG-CUP  
11. 9S-8006 [1] PLUG (7/8-14-THD)  
12. 2M-9780 [1] SEAL-O-RING  
13. 216-5586 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP17970073
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 2WG1-5280
FOR USE WITH ONE-PIECE PISTONS
i00122058 SEBP1797
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [4] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970074
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 2WG5281-UP
FOR USE WITH ONE-PIECE PISTONS
i00122059 SEBP1797
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970075
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 2WG6040-6468
FOR USE WITH ONE-PIECE PISTONS
i00122060 SEBP1797
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1095 YC [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970076
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 2WG6469-UP
FOR USE WITH ONE-PIECE PISTONS
i00917502 SEBP1797
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5403 YC [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970077
 

7C-5826: CYLINDER BLOCK GP

7C-5826 CYLINDER BLOCK GP
S/N 2WG1-5280
PART OF 2W-9746, 7E-2482 CYLINDER BLOCK GP
i00122272 SEBP1797
7C5826 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
   
  7C-6208 AF [1] SLEEVE-CYLINDER  
    (FOR SALVAGE OF DAMAGED CYL. BORES IN BLOCK. QUANTITY TO BE DETERMINED BY USER.)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP17970078
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 2WG1040-5279
FOR USE WITH TWO-PIECE PISTONS
i00157913 SEBP1797
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 Y [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-5651 [6] TUBE AS-OIL JET  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP17970079
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 2WG5280-6039
FOR USE WITH TWO-PIECE PISTONS
i00157914 SEBP1797
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3116 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-5651 [6] TUBE AS-OIL JET  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
1992/10/01
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning {0672,0673,1201}
1994/09/01
New Design Of Cylinder Block And Main Bearings{1201,1203,1224}
1999/05/01
New Main Bearing Material {1203}
1999/06/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston Cooling Jet
3114, 3116, 3126 Engines
Cylinder Block Cover Group
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearing Journal
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116 and 3126 Engines
Piston Cooling Jets - Remove and Install
3114, 3116 and 3126 Engines
Camshaft Bearings - Remove and Install
3114, 3116 and 3126 Engines
Crankshaft Main Bearings - Remove
3114, 3116 and 3126 Engines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
Oversize Pistons Not Available{1214,1216}
1993/04/05
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24

Caterpillar Parts SIS Catalog 3116 :

CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
113-6087 CRANKSHAFT GP
COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9Y-7620 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4P-0600 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
7W-9847 COVER GP-FRONT HOUSING
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QU&#201;BEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.